blob: 2606d1bee8d96da0f5af3fd48c48d79c126536cf [file] [log] [blame]
/*
* Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __TZC_DMC500_H__
#define __TZC_DMC500_H__
#include <tzc_common.h>
#define SI_STATUS_OFFSET 0x000
#define SI_STATE_CTRL_OFFSET 0x030
#define SI_FLUSH_CTRL_OFFSET 0x034
#define SI_INT_CONTROL_OFFSET 0x048
#define SI_INT_STATUS_OFFSET 0x004
#define SI_TZ_FAIL_ADDRESS_LOW_OFFSET 0x008
#define SI_TZ_FAIL_ADDRESS_HIGH_OFFSET 0x00c
#define SI_FAIL_CONTROL_OFFSET 0x010
#define SI_FAIL_ID_OFFSET 0x014
#define SI_INT_CLR_OFFSET 0x04c
/*
* DMC-500 has 2 system interfaces each having a similar set of regs
* to configure each interface.
*/
#define SI0_BASE 0x0000
#define SI1_BASE 0x0200
/* Bit positions of SIx_SI_STATUS */
#define SI_EMPTY_SHIFT 0x01
#define SI_STALL_ACK_SHIFT 0x00
#define SI_EMPTY_MASK 0x01
#define SI_STALL_ACK_MASK 0x01
/* Bit positions of SIx_SI_INT_STATUS */
#define PMU_REQ_INT_OVERFLOW_STATUS_SHIFT 18
#define FAILED_ACCESS_INT_OVERFLOW_STATUS_SHIFT 16
#define PMU_REQ_INT_STATUS_SHIFT 2
#define FAILED_ACCESS_INT_INFO_TZ_OVERLAP_STATUS_SHIFT 1
#define FAILED_ACCESS_INT_STATUS_SHIFT 0
#define PMU_REQ_INT_OVERFLOW_STATUS_MASK 0x1
#define FAILED_ACCESS_INT_OVERFLOW_STATUS_MASK 0x1
#define PMU_REQ_INT_STATUS_MASK 0x1
#define FAILED_ACCESS_INT_INFO_TZ_OVERLAP_STATUS_MASK 0x1
#define FAILED_ACCESS_INT_STATUS_MASK 0x1
/* Bit positions of SIx_TZ_FAIL_CONTROL */
#define DIRECTION_SHIFT 24
#define NON_SECURE_SHIFT 21
#define PRIVILEGED_SHIFT 20
#define FAILED_ACCESS_INT_INFO_RANK_MASKED_SHIFT 3
#define FAILED_ACCESS_INT_INFO_UNMAPPED_SHIFT 2
#define FAILED_ACCESS_INT_TZ_FAIL_SHIFT 0x1
#define FAILED_ACCESS_INT_INFO_OUTSIDE_DEFAULT_SHIFT 0
#define DIRECTION_MASK 0x1
#define NON_SECURE_MASK 0x1
#define PRIVILEGED_MASK 0x1
#define FAILED_ACCESS_INT_INFO_RANK_MASKED_MASK 0x1
#define FAILED_ACCESS_INT_INFO_UNMAPPED_MASK 0x1
#define FAILED_ACCESS_INT_TZ_FAIL_MASK 1
#define FAILED_ACCESS_INT_INFO_OUTSIDE_DEFAULT_MASK 0x1
/* Bit positions of SIx_FAIL_STATUS */
#define FAIL_ID_VNET_SHIFT 24
#define FAIL_ID_ID_SHIFT 0
#define FAIL_ID_VNET_MASK 0xf
#define FAIL_ID_ID_MASK 0xffffff
/* Bit positions of SIx_SI_STATE_CONTRL */
#define SI_STALL_REQ_GO 0x0
#define SI_STALL_REQ_STALL 0x1
/* Bit positions of SIx_SI_FLUSH_CONTROL */
#define SI_FLUSH_REQ_INACTIVE 0x0
#define SI_FLUSH_REQ_ACTIVE 0x1
#define SI_FLUSH_REQ_MASK 0x1
/* Bit positions of SIx_SI_INT_CONTROL */
#define PMU_REQ_INT_EN_SHIFT 2
#define OVERLAP_DETECT_INT_EN_SHIFT 1
#define FAILED_ACCESS_INT_EN_SHIFT 0
#define PMU_REQ_INT_EN_MASK 0x1
#define OVERLAP_DETECT_INT_EN_MASK 0x1
#define FAILED_ACCESS_INT_EN_MASK 0x1
#define PMU_REQ_INT_EN 0x1
#define OVERLAP_DETECT_INT_EN 0x1
#define FAILED_ACCESS_INT_EN 0x1
/* Bit positions of SIx_SI_INT_CLR */
#define PMU_REQ_OFLOW_CLR_SHIFT 18
#define FAILED_ACCESS_OFLOW_CLR_SHIFT 16
#define PMU_REQ_INT_CLR_SHIFT 2
#define FAILED_ACCESS_INT_CLR_SHIFT 0
#define PMU_REQ_OFLOW_CLR_MASK 0x1
#define FAILED_ACCESS_OFLOW_CLR_MASK 0x1
#define PMU_REQ_INT_CLR_MASK 0x1
#define FAILED_ACCESS_INT_CLR_MASK 0x1
#define PMU_REQ_OFLOW_CLR 0x1
#define FAILED_ACCESS_OFLOW_CLR 0x1
#define PMU_REQ_INT_CLR 0x1
#define FAILED_ACCESS_INT_CLR 0x1
/* Macro to get the correct base register for a system interface */
#define IFACE_OFFSET(sys_if) ((sys_if) ? SI1_BASE : SI0_BASE)
#define MAX_SYS_IF_COUNT 2
#define MAX_REGION_VAL 8
/* DMC-500 supports striping across a max of 4 DMC instances */
#define MAX_DMC_COUNT 4
/* Consist of part_number_1 and part_number_0 */
#define DMC500_PERIPHERAL_ID 0x0450
/* Filter enable bits in a TZC */
#define TZC_DMC500_REGION_ATTR_F_EN_MASK 0x1
/* Length of registers for configuring each region */
#define TZC_DMC500_REGION_SIZE 0x018
#ifndef __ASSEMBLY__
#include <stdint.h>
/*
* Contains the base addresses of all the DMC instances.
*/
typedef struct tzc_dmc500_driver_data {
uintptr_t dmc_base[MAX_DMC_COUNT];
int dmc_count;
} tzc_dmc500_driver_data_t;
void tzc_dmc500_driver_init(const tzc_dmc500_driver_data_t *plat_driver_data);
void tzc_dmc500_configure_region0(tzc_region_attributes_t sec_attr,
unsigned int nsaid_permissions);
void tzc_dmc500_configure_region(int region_no,
unsigned long long region_base,
unsigned long long region_top,
tzc_region_attributes_t sec_attr,
unsigned int nsaid_permissions);
void tzc_dmc500_set_action(tzc_action_t action);
void tzc_dmc500_config_complete(void);
int tzc_dmc500_verify_complete(void);
#endif /* __ASSEMBLY__ */
#endif /* __TZC_DMC500_H__ */