blob: 3adcbf519b6bafcded2c2dbec993608317d2d448 [file] [log] [blame]
/*
* Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __ASM_MACROS_S__
#define __ASM_MACROS_S__
#include <arch.h>
#include <asm_macros_common.S>
#include <spinlock.h>
#define WORD_SIZE 4
/*
* Co processor register accessors
*/
.macro ldcopr reg, coproc, opc1, CRn, CRm, opc2
mrc \coproc, \opc1, \reg, \CRn, \CRm, \opc2
.endm
.macro ldcopr16 reg1, reg2, coproc, opc1, CRm
mrrc \coproc, \opc1, \reg1, \reg2, \CRm
.endm
.macro stcopr reg, coproc, opc1, CRn, CRm, opc2
mcr \coproc, \opc1, \reg, \CRn, \CRm, \opc2
.endm
.macro stcopr16 reg1, reg2, coproc, opc1, CRm
mcrr \coproc, \opc1, \reg1, \reg2, \CRm
.endm
/* Cache line size helpers */
.macro dcache_line_size reg, tmp
ldcopr \tmp, CTR
ubfx \tmp, \tmp, #CTR_DMINLINE_SHIFT, #CTR_DMINLINE_WIDTH
mov \reg, #WORD_SIZE
lsl \reg, \reg, \tmp
.endm
.macro icache_line_size reg, tmp
ldcopr \tmp, CTR
and \tmp, \tmp, #CTR_IMINLINE_MASK
mov \reg, #WORD_SIZE
lsl \reg, \reg, \tmp
.endm
/*
* Declare the exception vector table, enforcing it is aligned on a
* 32 byte boundary.
*/
.macro vector_base label
.section .vectors, "ax"
.align 5
\label:
.endm
/*
* This macro calculates the base address of the current CPU's multi
* processor(MP) stack using the plat_my_core_pos() index, the name of
* the stack storage and the size of each stack.
* Out: r0 = physical address of stack base
* Clobber: r14, r1, r2
*/
.macro get_my_mp_stack _name, _size
bl plat_my_core_pos
ldr r2, =(\_name + \_size)
mov r1, #\_size
mla r0, r0, r1, r2
.endm
/*
* This macro calculates the base address of a uniprocessor(UP) stack
* using the name of the stack storage and the size of the stack
* Out: r0 = physical address of stack base
*/
.macro get_up_stack _name, _size
ldr r0, =(\_name + \_size)
.endm
/*
* Macro to mark instances where we're jumping to a function and don't
* expect a return. To provide the function being jumped to with
* additional information, we use 'bl' instruction to jump rather than
* 'b'.
*
* Debuggers infer the location of a call from where LR points to, which
* is usually the instruction after 'bl'. If this macro expansion
* happens to be the last location in a function, that'll cause the LR
* to point a location beyond the function, thereby misleading debugger
* back trace. We therefore insert a 'nop' after the function call for
* debug builds, unless 'skip_nop' parameter is non-zero.
*/
.macro no_ret _func:req, skip_nop=0
bl \_func
#if DEBUG
.ifeq \skip_nop
nop
.endif
#endif
.endm
/*
* Reserve space for a spin lock in assembly file.
*/
.macro define_asm_spinlock _name:req
.align SPINLOCK_ASM_ALIGN
\_name:
.space SPINLOCK_ASM_SIZE
.endm
/*
* Helper macro to OR the bottom 32 bits of `_val` into `_reg_l`
* and the top 32 bits of `_val` into `_reg_h`. If either the bottom
* or top word of `_val` is zero, the corresponding OR operation
* is skipped.
*/
.macro orr64_imm _reg_l, _reg_h, _val
.if (\_val >> 32)
orr \_reg_h, \_reg_h, #(\_val >> 32)
.endif
.if (\_val & 0xffffffff)
orr \_reg_l, \_reg_l, #(\_val & 0xffffffff)
.endif
.endm
/*
* Helper macro to bitwise-clear bits in `_reg_l` and
* `_reg_h` given a 64 bit immediate `_val`. The set bits
* in the bottom word of `_val` dictate which bits from
* `_reg_l` should be cleared. Similarly, the set bits in
* the top word of `_val` dictate which bits from `_reg_h`
* should be cleared. If either the bottom or top word of
* `_val` is zero, the corresponding BIC operation is skipped.
*/
.macro bic64_imm _reg_l, _reg_h, _val
.if (\_val >> 32)
bic \_reg_h, \_reg_h, #(\_val >> 32)
.endif
.if (\_val & 0xffffffff)
bic \_reg_l, \_reg_l, #(\_val & 0xffffffff)
.endif
.endm
#endif /* __ASM_MACROS_S__ */