| /* vi: set sw=4 ts=4: */ |
| /* |
| * A tiny 'top' utility. |
| * |
| * This is written specifically for the linux /proc/<PID>/stat(m) |
| * files format. |
| * |
| * This reads the PIDs of all processes and their status and shows |
| * the status of processes (first ones that fit to screen) at given |
| * intervals. |
| * |
| * NOTES: |
| * - At startup this changes to /proc, all the reads are then |
| * relative to that. |
| * |
| * (C) Eero Tamminen <oak at welho dot com> |
| * |
| * Rewritten by Vladimir Oleynik (C) 2002 <dzo@simtreas.ru> |
| * |
| * Sept 2008: Vineet Gupta <vineet.gupta@arc.com> |
| * Added Support for reporting SMP Information |
| * - CPU where process was last seen running |
| * (to see effect of sched_setaffinity() etc) |
| * - CPU time split (idle/IO/wait etc) per CPU |
| * |
| * Copyright (c) 1992 Branko Lankester |
| * Copyright (c) 1992 Roger Binns |
| * Copyright (C) 1994-1996 Charles L. Blake. |
| * Copyright (C) 1992-1998 Michael K. Johnson |
| * |
| * Licensed under GPLv2, see file LICENSE in this source tree. |
| */ |
| /* How to snapshot /proc for debugging top problems: |
| * for f in /proc/[0-9]*""/stat; do |
| * n=${f#/proc/} |
| * n=${n%/stat}_stat |
| * cp $f $n |
| * done |
| * cp /proc/stat /proc/meminfo /proc/loadavg . |
| * top -bn1 >top.out |
| * |
| * ...and how to run top on it on another machine: |
| * rm -rf proc; mkdir proc |
| * for f in [0-9]*_stat; do |
| * p=${f%_stat} |
| * mkdir -p proc/$p |
| * cp $f proc/$p/stat |
| * done |
| * cp stat meminfo loadavg proc |
| * chroot . ./top -bn1 >top1.out |
| */ |
| //config:config TOP |
| //config: bool "top (18 kb)" |
| //config: default y |
| //config: help |
| //config: The top program provides a dynamic real-time view of a running |
| //config: system. |
| //config: |
| //config:config FEATURE_TOP_INTERACTIVE |
| //config: bool "Accept keyboard commands" |
| //config: default y |
| //config: depends on TOP |
| //config: help |
| //config: Without this, top will only refresh display every 5 seconds. |
| //config: No keyboard commands will work, only ^C to terminate. |
| //config: |
| //config:config FEATURE_TOP_CPU_USAGE_PERCENTAGE |
| //config: bool "Show CPU per-process usage percentage" |
| //config: default y |
| //config: depends on TOP |
| //config: help |
| //config: Make top display CPU usage for each process. |
| //config: This adds about 2k. |
| //config: |
| //config:config FEATURE_TOP_CPU_GLOBAL_PERCENTS |
| //config: bool "Show CPU global usage percentage" |
| //config: default y |
| //config: depends on FEATURE_TOP_CPU_USAGE_PERCENTAGE |
| //config: help |
| //config: Makes top display "CPU: NN% usr NN% sys..." line. |
| //config: This adds about 0.5k. |
| //config: |
| //config:config FEATURE_TOP_SMP_CPU |
| //config: bool "SMP CPU usage display ('c' key)" |
| //config: default y |
| //config: depends on FEATURE_TOP_CPU_GLOBAL_PERCENTS |
| //config: help |
| //config: Allow 'c' key to switch between individual/cumulative CPU stats |
| //config: This adds about 0.5k. |
| //config: |
| //config:config FEATURE_TOP_DECIMALS |
| //config: bool "Show 1/10th of a percent in CPU/mem statistics" |
| //config: default y |
| //config: depends on FEATURE_TOP_CPU_USAGE_PERCENTAGE |
| //config: help |
| //config: Show 1/10th of a percent in CPU/mem statistics. |
| //config: This adds about 0.3k. |
| //config: |
| //config:config FEATURE_TOP_SMP_PROCESS |
| //config: bool "Show CPU process runs on ('j' field)" |
| //config: default y |
| //config: depends on TOP |
| //config: help |
| //config: Show CPU where process was last found running on. |
| //config: This is the 'j' field. |
| //config: |
| //config:config FEATURE_TOPMEM |
| //config: bool "Topmem command ('s' key)" |
| //config: default y |
| //config: depends on TOP |
| //config: help |
| //config: Enable 's' in top (gives lots of memory info). |
| |
| //applet:IF_TOP(APPLET(top, BB_DIR_USR_BIN, BB_SUID_DROP)) |
| |
| //kbuild:lib-$(CONFIG_TOP) += top.o |
| |
| #include "libbb.h" |
| |
| #define ESC "\033" |
| |
| typedef struct top_status_t { |
| unsigned long vsz; |
| #if ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE |
| unsigned long ticks; |
| unsigned pcpu; /* delta of ticks */ |
| #endif |
| unsigned pid, ppid; |
| unsigned uid; |
| char state[4]; |
| char comm[COMM_LEN]; |
| #if ENABLE_FEATURE_TOP_SMP_PROCESS |
| int last_seen_on_cpu; |
| #endif |
| } top_status_t; |
| |
| typedef struct jiffy_counts_t { |
| /* Linux 2.4.x has only first four */ |
| unsigned long long usr, nic, sys, idle; |
| unsigned long long iowait, irq, softirq, steal; |
| unsigned long long total; |
| unsigned long long busy; |
| } jiffy_counts_t; |
| |
| /* This structure stores some critical information from one frame to |
| the next. Used for finding deltas. */ |
| typedef struct save_hist { |
| unsigned long ticks; |
| pid_t pid; |
| } save_hist; |
| |
| typedef int (*cmp_funcp)(top_status_t *P, top_status_t *Q); |
| |
| |
| enum { SORT_DEPTH = 3 }; |
| |
| /* Screens wider than this are unlikely */ |
| enum { LINE_BUF_SIZE = 512 - 64 }; |
| |
| struct globals { |
| top_status_t *top; |
| int ntop; |
| smallint inverted; |
| #if ENABLE_FEATURE_TOPMEM |
| smallint sort_field; |
| #endif |
| #if ENABLE_FEATURE_TOP_SMP_CPU |
| smallint smp_cpu_info; /* one/many cpu info lines? */ |
| #endif |
| unsigned lines; /* screen height */ |
| #if ENABLE_FEATURE_TOP_INTERACTIVE |
| struct termios initial_settings; |
| int scroll_ofs; |
| #define G_scroll_ofs G.scroll_ofs |
| #else |
| #define G_scroll_ofs 0 |
| #endif |
| #if !ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE |
| cmp_funcp sort_function[1]; |
| #else |
| cmp_funcp sort_function[SORT_DEPTH]; |
| struct save_hist *prev_hist; |
| unsigned prev_hist_count; |
| jiffy_counts_t cur_jif, prev_jif; |
| /* int hist_iterations; */ |
| unsigned total_pcpu; |
| /* unsigned long total_vsz; */ |
| #endif |
| #if ENABLE_FEATURE_TOP_SMP_CPU |
| /* Per CPU samples: current and last */ |
| jiffy_counts_t *cpu_jif, *cpu_prev_jif; |
| unsigned num_cpus; |
| #endif |
| #if ENABLE_FEATURE_TOP_INTERACTIVE |
| char kbd_input[KEYCODE_BUFFER_SIZE]; |
| #endif |
| char line_buf[LINE_BUF_SIZE]; |
| }; |
| #define G (*ptr_to_globals) |
| #define top (G.top ) |
| #define ntop (G.ntop ) |
| #define sort_field (G.sort_field ) |
| #define inverted (G.inverted ) |
| #define smp_cpu_info (G.smp_cpu_info ) |
| #define initial_settings (G.initial_settings ) |
| #define sort_function (G.sort_function ) |
| #define prev_hist (G.prev_hist ) |
| #define prev_hist_count (G.prev_hist_count ) |
| #define cur_jif (G.cur_jif ) |
| #define prev_jif (G.prev_jif ) |
| #define cpu_jif (G.cpu_jif ) |
| #define cpu_prev_jif (G.cpu_prev_jif ) |
| #define num_cpus (G.num_cpus ) |
| #define total_pcpu (G.total_pcpu ) |
| #define line_buf (G.line_buf ) |
| #define INIT_G() do { \ |
| SET_PTR_TO_GLOBALS(xzalloc(sizeof(G))); \ |
| BUILD_BUG_ON(LINE_BUF_SIZE <= 80); \ |
| } while (0) |
| |
| enum { |
| OPT_d = (1 << 0), |
| OPT_n = (1 << 1), |
| OPT_b = (1 << 2), |
| OPT_m = (1 << 3), |
| OPT_EOF = (1 << 4), /* pseudo: "we saw EOF in stdin" */ |
| }; |
| #define OPT_BATCH_MODE (option_mask32 & OPT_b) |
| |
| |
| #if ENABLE_FEATURE_TOP_INTERACTIVE |
| static int pid_sort(top_status_t *P, top_status_t *Q) |
| { |
| /* Buggy wrt pids with high bit set */ |
| /* (linux pids are in [1..2^15-1]) */ |
| return (Q->pid - P->pid); |
| } |
| #endif |
| |
| static int mem_sort(top_status_t *P, top_status_t *Q) |
| { |
| /* We want to avoid unsigned->signed and truncation errors */ |
| if (Q->vsz < P->vsz) return -1; |
| return Q->vsz != P->vsz; /* 0 if ==, 1 if > */ |
| } |
| |
| |
| #if ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE |
| |
| static int pcpu_sort(top_status_t *P, top_status_t *Q) |
| { |
| /* Buggy wrt ticks with high bit set */ |
| /* Affects only processes for which ticks overflow */ |
| return (int)Q->pcpu - (int)P->pcpu; |
| } |
| |
| static int time_sort(top_status_t *P, top_status_t *Q) |
| { |
| /* We want to avoid unsigned->signed and truncation errors */ |
| if (Q->ticks < P->ticks) return -1; |
| return Q->ticks != P->ticks; /* 0 if ==, 1 if > */ |
| } |
| |
| static int mult_lvl_cmp(void* a, void* b) |
| { |
| int i, cmp_val; |
| |
| for (i = 0; i < SORT_DEPTH; i++) { |
| cmp_val = (*sort_function[i])(a, b); |
| if (cmp_val != 0) |
| break; |
| } |
| return inverted ? -cmp_val : cmp_val; |
| } |
| |
| static NOINLINE int read_cpu_jiffy(FILE *fp, jiffy_counts_t *p_jif) |
| { |
| #if !ENABLE_FEATURE_TOP_SMP_CPU |
| static const char fmt[] ALIGN1 = "cpu %llu %llu %llu %llu %llu %llu %llu %llu"; |
| #else |
| static const char fmt[] ALIGN1 = "cp%*s %llu %llu %llu %llu %llu %llu %llu %llu"; |
| #endif |
| int ret; |
| |
| if (!fgets(line_buf, LINE_BUF_SIZE, fp) || line_buf[0] != 'c' /* not "cpu" */) |
| return 0; |
| ret = sscanf(line_buf, fmt, |
| &p_jif->usr, &p_jif->nic, &p_jif->sys, &p_jif->idle, |
| &p_jif->iowait, &p_jif->irq, &p_jif->softirq, |
| &p_jif->steal); |
| if (ret >= 4) { |
| p_jif->total = p_jif->usr + p_jif->nic + p_jif->sys + p_jif->idle |
| + p_jif->iowait + p_jif->irq + p_jif->softirq + p_jif->steal; |
| /* procps 2.x does not count iowait as busy time */ |
| p_jif->busy = p_jif->total - p_jif->idle - p_jif->iowait; |
| } |
| |
| return ret; |
| } |
| |
| static void get_jiffy_counts(void) |
| { |
| FILE* fp = xfopen_for_read("stat"); |
| |
| /* We need to parse cumulative counts even if SMP CPU display is on, |
| * they are used to calculate per process CPU% */ |
| prev_jif = cur_jif; |
| if (read_cpu_jiffy(fp, &cur_jif) < 4) |
| bb_error_msg_and_die("can't read '%s'", "/proc/stat"); |
| |
| #if !ENABLE_FEATURE_TOP_SMP_CPU |
| fclose(fp); |
| return; |
| #else |
| if (!smp_cpu_info) { |
| fclose(fp); |
| return; |
| } |
| |
| if (!num_cpus) { |
| /* First time here. How many CPUs? |
| * There will be at least 1 /proc/stat line with cpu%d |
| */ |
| while (1) { |
| cpu_jif = xrealloc_vector(cpu_jif, 1, num_cpus); |
| if (read_cpu_jiffy(fp, &cpu_jif[num_cpus]) <= 4) |
| break; |
| num_cpus++; |
| } |
| if (num_cpus == 0) /* /proc/stat with only "cpu ..." line?! */ |
| smp_cpu_info = 0; |
| |
| cpu_prev_jif = xzalloc(sizeof(cpu_prev_jif[0]) * num_cpus); |
| |
| /* Otherwise the first per cpu display shows all 100% idles */ |
| usleep(50000); |
| } else { /* Non first time invocation */ |
| jiffy_counts_t *tmp; |
| int i; |
| |
| /* First switch the sample pointers: no need to copy */ |
| tmp = cpu_prev_jif; |
| cpu_prev_jif = cpu_jif; |
| cpu_jif = tmp; |
| |
| /* Get the new samples */ |
| for (i = 0; i < num_cpus; i++) |
| read_cpu_jiffy(fp, &cpu_jif[i]); |
| } |
| #endif |
| fclose(fp); |
| } |
| |
| static void do_stats(void) |
| { |
| top_status_t *cur; |
| pid_t pid; |
| int n; |
| unsigned i, last_i; |
| struct save_hist *new_hist; |
| |
| get_jiffy_counts(); |
| total_pcpu = 0; |
| /* total_vsz = 0; */ |
| new_hist = xmalloc(sizeof(new_hist[0]) * ntop); |
| /* |
| * Make a pass through the data to get stats. |
| */ |
| /* hist_iterations = 0; */ |
| i = 0; |
| for (n = 0; n < ntop; n++) { |
| cur = top + n; |
| |
| /* |
| * Calculate time in cur process. Time is sum of user time |
| * and system time |
| */ |
| pid = cur->pid; |
| new_hist[n].ticks = cur->ticks; |
| new_hist[n].pid = pid; |
| |
| /* find matching entry from previous pass */ |
| cur->pcpu = 0; |
| /* do not start at index 0, continue at last used one |
| * (brought hist_iterations from ~14000 down to 172) */ |
| last_i = i; |
| if (prev_hist_count) do { |
| if (prev_hist[i].pid == pid) { |
| cur->pcpu = cur->ticks - prev_hist[i].ticks; |
| total_pcpu += cur->pcpu; |
| break; |
| } |
| i = (i+1) % prev_hist_count; |
| /* hist_iterations++; */ |
| } while (i != last_i); |
| /* total_vsz += cur->vsz; */ |
| } |
| |
| /* |
| * Save cur frame's information. |
| */ |
| free(prev_hist); |
| prev_hist = new_hist; |
| prev_hist_count = ntop; |
| } |
| |
| #endif /* FEATURE_TOP_CPU_USAGE_PERCENTAGE */ |
| |
| #if ENABLE_FEATURE_TOP_CPU_GLOBAL_PERCENTS && ENABLE_FEATURE_TOP_DECIMALS |
| /* formats 7 char string (8 with terminating NUL) */ |
| static char *fmt_100percent_8(char pbuf[8], unsigned value, unsigned total) |
| { |
| unsigned t; |
| if (value >= total) { /* 100% ? */ |
| strcpy(pbuf, " 100% "); |
| return pbuf; |
| } |
| /* else generate " [N/space]N.N% " string */ |
| value = 1000 * value / total; |
| t = value / 100; |
| value = value % 100; |
| pbuf[0] = ' '; |
| pbuf[1] = t ? t + '0' : ' '; |
| pbuf[2] = '0' + (value / 10); |
| pbuf[3] = '.'; |
| pbuf[4] = '0' + (value % 10); |
| pbuf[5] = '%'; |
| pbuf[6] = ' '; |
| pbuf[7] = '\0'; |
| return pbuf; |
| } |
| #endif |
| |
| #if ENABLE_FEATURE_TOP_CPU_GLOBAL_PERCENTS |
| static void display_cpus(int scr_width, char *scrbuf, int *lines_rem_p) |
| { |
| /* |
| * xxx% = (cur_jif.xxx - prev_jif.xxx) / (cur_jif.total - prev_jif.total) * 100% |
| */ |
| unsigned total_diff; |
| jiffy_counts_t *p_jif, *p_prev_jif; |
| int i; |
| # if ENABLE_FEATURE_TOP_SMP_CPU |
| int n_cpu_lines; |
| # endif |
| |
| /* using (unsigned) casts to make operations cheaper */ |
| # define CALC_TOTAL_DIFF do { \ |
| total_diff = (unsigned)(p_jif->total - p_prev_jif->total); \ |
| if (total_diff == 0) total_diff = 1; \ |
| } while (0) |
| |
| # if ENABLE_FEATURE_TOP_DECIMALS |
| # define CALC_STAT(xxx) char xxx[8] |
| # define SHOW_STAT(xxx) fmt_100percent_8(xxx, (unsigned)(p_jif->xxx - p_prev_jif->xxx), total_diff) |
| # define FMT "%s" |
| # else |
| # define CALC_STAT(xxx) unsigned xxx = 100 * (unsigned)(p_jif->xxx - p_prev_jif->xxx) / total_diff |
| # define SHOW_STAT(xxx) xxx |
| # define FMT "%4u%% " |
| # endif |
| |
| # if !ENABLE_FEATURE_TOP_SMP_CPU |
| { |
| i = 1; |
| p_jif = &cur_jif; |
| p_prev_jif = &prev_jif; |
| # else |
| /* Loop thru CPU(s) */ |
| n_cpu_lines = smp_cpu_info ? num_cpus : 1; |
| if (n_cpu_lines > *lines_rem_p) |
| n_cpu_lines = *lines_rem_p; |
| |
| for (i = 0; i < n_cpu_lines; i++) { |
| p_jif = &cpu_jif[i]; |
| p_prev_jif = &cpu_prev_jif[i]; |
| # endif |
| CALC_TOTAL_DIFF; |
| |
| { /* Need a block: CALC_STAT are declarations */ |
| CALC_STAT(usr); |
| CALC_STAT(sys); |
| CALC_STAT(nic); |
| CALC_STAT(idle); |
| CALC_STAT(iowait); |
| CALC_STAT(irq); |
| CALC_STAT(softirq); |
| /*CALC_STAT(steal);*/ |
| |
| snprintf(scrbuf, scr_width, |
| /* Barely fits in 79 chars when in "decimals" mode. */ |
| # if ENABLE_FEATURE_TOP_SMP_CPU |
| "CPU%s:"FMT"usr"FMT"sys"FMT"nic"FMT"idle"FMT"io"FMT"irq"FMT"sirq", |
| (smp_cpu_info ? utoa(i) : ""), |
| # else |
| "CPU:"FMT"usr"FMT"sys"FMT"nic"FMT"idle"FMT"io"FMT"irq"FMT"sirq", |
| # endif |
| SHOW_STAT(usr), SHOW_STAT(sys), SHOW_STAT(nic), SHOW_STAT(idle), |
| SHOW_STAT(iowait), SHOW_STAT(irq), SHOW_STAT(softirq) |
| /*, SHOW_STAT(steal) - what is this 'steal' thing? */ |
| /* I doubt anyone wants to know it */ |
| ); |
| puts(scrbuf); |
| } |
| } |
| # undef SHOW_STAT |
| # undef CALC_STAT |
| # undef FMT |
| *lines_rem_p -= i; |
| } |
| #else /* !ENABLE_FEATURE_TOP_CPU_GLOBAL_PERCENTS */ |
| # define display_cpus(scr_width, scrbuf, lines_rem) ((void)0) |
| #endif |
| |
| enum { |
| MI_MEMTOTAL, |
| MI_MEMFREE, |
| MI_MEMSHARED, |
| MI_SHMEM, |
| MI_BUFFERS, |
| MI_CACHED, |
| MI_SWAPTOTAL, |
| MI_SWAPFREE, |
| MI_DIRTY, |
| MI_WRITEBACK, |
| MI_ANONPAGES, |
| MI_MAPPED, |
| MI_SLAB, |
| MI_MAX |
| }; |
| |
| static void parse_meminfo(unsigned long meminfo[MI_MAX]) |
| { |
| static const char fields[] ALIGN1 = |
| "MemTotal\0" |
| "MemFree\0" |
| "MemShared\0" |
| "Shmem\0" |
| "Buffers\0" |
| "Cached\0" |
| "SwapTotal\0" |
| "SwapFree\0" |
| "Dirty\0" |
| "Writeback\0" |
| "AnonPages\0" |
| "Mapped\0" |
| "Slab\0"; |
| char buf[60]; /* actual lines we expect are ~30 chars or less */ |
| FILE *f; |
| int i; |
| |
| memset(meminfo, 0, sizeof(meminfo[0]) * MI_MAX); |
| f = xfopen_for_read("meminfo"); |
| while (fgets(buf, sizeof(buf), f) != NULL) { |
| char *c = strchr(buf, ':'); |
| if (!c) |
| continue; |
| *c = '\0'; |
| i = index_in_strings(fields, buf); |
| if (i >= 0) |
| meminfo[i] = strtoul(c+1, NULL, 10); |
| } |
| fclose(f); |
| } |
| |
| static unsigned long display_header(int scr_width, int *lines_rem_p) |
| { |
| char scrbuf[100]; /* [80] was a bit too low on 8Gb ram box */ |
| char *buf; |
| unsigned long meminfo[MI_MAX]; |
| |
| parse_meminfo(meminfo); |
| |
| /* Output memory info */ |
| if (scr_width > (int)sizeof(scrbuf)) |
| scr_width = sizeof(scrbuf); |
| snprintf(scrbuf, scr_width, |
| "Mem: %luK used, %luK free, %luK shrd, %luK buff, %luK cached", |
| meminfo[MI_MEMTOTAL] - meminfo[MI_MEMFREE], |
| meminfo[MI_MEMFREE], |
| meminfo[MI_MEMSHARED] + meminfo[MI_SHMEM], |
| meminfo[MI_BUFFERS], |
| meminfo[MI_CACHED]); |
| /* Go to top & clear to the end of screen */ |
| printf(OPT_BATCH_MODE ? "%s\n" : ESC"[H" ESC"[J" "%s\n", scrbuf); |
| (*lines_rem_p)--; |
| |
| /* Display CPU time split as percentage of total time. |
| * This displays either a cumulative line or one line per CPU. |
| */ |
| display_cpus(scr_width, scrbuf, lines_rem_p); |
| |
| /* Read load average as a string */ |
| buf = stpcpy(scrbuf, "Load average: "); |
| open_read_close("loadavg", buf, sizeof(scrbuf) - sizeof("Load average: ")); |
| scrbuf[scr_width - 1] = '\0'; |
| strchrnul(buf, '\n')[0] = '\0'; |
| puts(scrbuf); |
| (*lines_rem_p)--; |
| |
| return meminfo[MI_MEMTOTAL]; |
| } |
| |
| static NOINLINE void display_process_list(int lines_rem, int scr_width) |
| { |
| enum { |
| BITS_PER_INT = sizeof(int) * 8 |
| }; |
| |
| top_status_t *s; |
| unsigned long total_memory = display_header(scr_width, &lines_rem); /* or use total_vsz? */ |
| /* xxx_shift and xxx_scale variables allow us to replace |
| * expensive divides with multiply and shift */ |
| unsigned pmem_shift, pmem_scale, pmem_half; |
| #if ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE |
| unsigned tmp_unsigned; |
| unsigned pcpu_shift, pcpu_scale, pcpu_half; |
| unsigned busy_jifs; |
| #endif |
| |
| /* what info of the processes is shown */ |
| printf(OPT_BATCH_MODE ? "%.*s" : ESC"[7m" "%.*s" ESC"[m", scr_width, |
| " PID PPID USER STAT VSZ %VSZ" |
| IF_FEATURE_TOP_SMP_PROCESS(" CPU") |
| IF_FEATURE_TOP_CPU_USAGE_PERCENTAGE(" %CPU") |
| " COMMAND"); |
| lines_rem--; |
| |
| #if ENABLE_FEATURE_TOP_DECIMALS |
| # define UPSCALE 1000 |
| # define CALC_STAT(name, val) div_t name = div((val), 10) |
| # define SHOW_STAT(name) name.quot, '0'+name.rem |
| # define FMT "%3u.%c" |
| #else |
| # define UPSCALE 100 |
| # define CALC_STAT(name, val) unsigned name = (val) |
| # define SHOW_STAT(name) name |
| # define FMT "%4u%%" |
| #endif |
| /* |
| * %VSZ = s->vsz/MemTotal |
| */ |
| pmem_shift = BITS_PER_INT-11; |
| pmem_scale = UPSCALE*(1U<<(BITS_PER_INT-11)) / total_memory; |
| /* s->vsz is in kb. we want (s->vsz * pmem_scale) to never overflow */ |
| while (pmem_scale >= 512) { |
| pmem_scale /= 4; |
| pmem_shift -= 2; |
| } |
| pmem_half = (1U << pmem_shift) / (ENABLE_FEATURE_TOP_DECIMALS ? 20 : 2); |
| #if ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE |
| busy_jifs = cur_jif.busy - prev_jif.busy; |
| /* This happens if there were lots of short-lived processes |
| * between two top updates (e.g. compilation) */ |
| if (total_pcpu < busy_jifs) total_pcpu = busy_jifs; |
| |
| /* |
| * CPU% = s->pcpu/sum(s->pcpu) * busy_cpu_ticks/total_cpu_ticks |
| * (pcpu is delta of sys+user time between samples) |
| */ |
| /* (cur_jif.xxx - prev_jif.xxx) and s->pcpu are |
| * in 0..~64000 range (HZ*update_interval). |
| * we assume that unsigned is at least 32-bit. |
| */ |
| pcpu_shift = 6; |
| pcpu_scale = UPSCALE*64 * (uint16_t)busy_jifs; |
| if (pcpu_scale == 0) |
| pcpu_scale = 1; |
| while (pcpu_scale < (1U << (BITS_PER_INT-2))) { |
| pcpu_scale *= 4; |
| pcpu_shift += 2; |
| } |
| tmp_unsigned = (uint16_t)(cur_jif.total - prev_jif.total) * total_pcpu; |
| if (tmp_unsigned != 0) |
| pcpu_scale /= tmp_unsigned; |
| /* we want (s->pcpu * pcpu_scale) to never overflow */ |
| while (pcpu_scale >= 1024) { |
| pcpu_scale /= 4; |
| pcpu_shift -= 2; |
| } |
| pcpu_half = (1U << pcpu_shift) / (ENABLE_FEATURE_TOP_DECIMALS ? 20 : 2); |
| /* printf(" pmem_scale=%u pcpu_scale=%u ", pmem_scale, pcpu_scale); */ |
| #endif |
| |
| /* Ok, all preliminary data is ready, go through the list */ |
| scr_width += 2; /* account for leading '\n' and trailing NUL */ |
| if (lines_rem > ntop - G_scroll_ofs) |
| lines_rem = ntop - G_scroll_ofs; |
| s = top + G_scroll_ofs; |
| while (--lines_rem >= 0) { |
| char vsz_str_buf[8]; |
| unsigned col; |
| |
| CALC_STAT(pmem, (s->vsz*pmem_scale + pmem_half) >> pmem_shift); |
| #if ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE |
| CALC_STAT(pcpu, (s->pcpu*pcpu_scale + pcpu_half) >> pcpu_shift); |
| #endif |
| |
| smart_ulltoa5(s->vsz, vsz_str_buf, " mgtpezy"); |
| /* PID PPID USER STAT VSZ %VSZ [%CPU] COMMAND */ |
| col = snprintf(line_buf, scr_width, |
| "\n" "%5u%6u %-8.8s %s %.5s" FMT |
| IF_FEATURE_TOP_SMP_PROCESS(" %3d") |
| IF_FEATURE_TOP_CPU_USAGE_PERCENTAGE(FMT) |
| " ", |
| s->pid, s->ppid, get_cached_username(s->uid), |
| s->state, vsz_str_buf, |
| SHOW_STAT(pmem) |
| IF_FEATURE_TOP_SMP_PROCESS(, s->last_seen_on_cpu) |
| IF_FEATURE_TOP_CPU_USAGE_PERCENTAGE(, SHOW_STAT(pcpu)) |
| ); |
| if ((int)(scr_width - col) > 1) |
| read_cmdline(line_buf + col, scr_width - col, s->pid, s->comm); |
| fputs(line_buf, stdout); |
| /* printf(" %d/%d %lld/%lld", s->pcpu, total_pcpu, |
| cur_jif.busy - prev_jif.busy, cur_jif.total - prev_jif.total); */ |
| s++; |
| } |
| /* printf(" %d", hist_iterations); */ |
| bb_putchar(OPT_BATCH_MODE ? '\n' : '\r'); |
| fflush_all(); |
| } |
| #undef UPSCALE |
| #undef SHOW_STAT |
| #undef CALC_STAT |
| #undef FMT |
| |
| static void clearmems(void) |
| { |
| clear_username_cache(); |
| free(top); |
| top = NULL; |
| } |
| |
| #if ENABLE_FEATURE_TOP_INTERACTIVE |
| static void reset_term(void) |
| { |
| if (!OPT_BATCH_MODE) |
| tcsetattr_stdin_TCSANOW(&initial_settings); |
| } |
| |
| static void sig_catcher(int sig) |
| { |
| reset_term(); |
| kill_myself_with_sig(sig); |
| } |
| #endif /* FEATURE_TOP_INTERACTIVE */ |
| |
| /* |
| * TOPMEM support |
| */ |
| |
| typedef unsigned long mem_t; |
| |
| typedef struct topmem_status_t { |
| unsigned pid; |
| char comm[COMM_LEN]; |
| /* vsz doesn't count /dev/xxx mappings except /dev/zero */ |
| mem_t vsz ; |
| mem_t vszrw ; |
| mem_t rss ; |
| mem_t rss_sh ; |
| mem_t dirty ; |
| mem_t dirty_sh; |
| mem_t stack ; |
| } topmem_status_t; |
| |
| enum { NUM_SORT_FIELD = 7 }; |
| |
| #define topmem ((topmem_status_t*)top) |
| |
| #if ENABLE_FEATURE_TOPMEM |
| |
| static int topmem_sort(char *a, char *b) |
| { |
| int n; |
| mem_t l, r; |
| |
| n = offsetof(topmem_status_t, vsz) + (sort_field * sizeof(mem_t)); |
| l = *(mem_t*)(a + n); |
| r = *(mem_t*)(b + n); |
| if (l == r) { |
| l = ((topmem_status_t*)a)->dirty; |
| r = ((topmem_status_t*)b)->dirty; |
| } |
| /* We want to avoid unsigned->signed and truncation errors */ |
| /* l>r: -1, l=r: 0, l<r: 1 */ |
| n = (l > r) ? -1 : (l != r); |
| return inverted ? -n : n; |
| } |
| |
| /* display header info (meminfo / loadavg) */ |
| static void display_topmem_header(int scr_width, int *lines_rem_p) |
| { |
| unsigned long meminfo[MI_MAX]; |
| |
| parse_meminfo(meminfo); |
| |
| snprintf(line_buf, LINE_BUF_SIZE, |
| "Mem total:%lu anon:%lu map:%lu free:%lu", |
| meminfo[MI_MEMTOTAL], |
| meminfo[MI_ANONPAGES], |
| meminfo[MI_MAPPED], |
| meminfo[MI_MEMFREE]); |
| printf(OPT_BATCH_MODE ? "%.*s\n" : ESC"[H" ESC"[J" "%.*s\n", scr_width, line_buf); |
| |
| snprintf(line_buf, LINE_BUF_SIZE, |
| " slab:%lu buf:%lu cache:%lu dirty:%lu write:%lu", |
| meminfo[MI_SLAB], |
| meminfo[MI_BUFFERS], |
| meminfo[MI_CACHED], |
| meminfo[MI_DIRTY], |
| meminfo[MI_WRITEBACK]); |
| printf("%.*s\n", scr_width, line_buf); |
| |
| snprintf(line_buf, LINE_BUF_SIZE, |
| "Swap total:%lu free:%lu", // TODO: % used? |
| meminfo[MI_SWAPTOTAL], |
| meminfo[MI_SWAPFREE]); |
| printf("%.*s\n", scr_width, line_buf); |
| |
| (*lines_rem_p) -= 3; |
| } |
| |
| static void ulltoa6_and_space(unsigned long long ul, char buf[6]) |
| { |
| /* see http://en.wikipedia.org/wiki/Tera */ |
| smart_ulltoa5(ul, buf, " mgtpezy")[0] = ' '; |
| } |
| |
| static NOINLINE void display_topmem_process_list(int lines_rem, int scr_width) |
| { |
| #define HDR_STR " PID VSZ VSZRW RSS (SHR) DIRTY (SHR) STACK" |
| #define MIN_WIDTH sizeof(HDR_STR) |
| const topmem_status_t *s = topmem + G_scroll_ofs; |
| char *cp, ch; |
| |
| display_topmem_header(scr_width, &lines_rem); |
| |
| strcpy(line_buf, HDR_STR " COMMAND"); |
| /* Mark the ^FIELD^ we sort by */ |
| cp = &line_buf[5 + sort_field * 6]; |
| ch = "^_"[inverted]; |
| cp[6] = ch; |
| do *cp++ = ch; while (*cp == ' '); |
| |
| printf(OPT_BATCH_MODE ? "%.*s" : ESC"[7m" "%.*s" ESC"[m", scr_width, line_buf); |
| lines_rem--; |
| |
| if (lines_rem > ntop - G_scroll_ofs) |
| lines_rem = ntop - G_scroll_ofs; |
| while (--lines_rem >= 0) { |
| /* PID VSZ VSZRW RSS (SHR) DIRTY (SHR) COMMAND */ |
| ulltoa6_and_space(s->pid , &line_buf[0*6]); |
| ulltoa6_and_space(s->vsz , &line_buf[1*6]); |
| ulltoa6_and_space(s->vszrw , &line_buf[2*6]); |
| ulltoa6_and_space(s->rss , &line_buf[3*6]); |
| ulltoa6_and_space(s->rss_sh , &line_buf[4*6]); |
| ulltoa6_and_space(s->dirty , &line_buf[5*6]); |
| ulltoa6_and_space(s->dirty_sh, &line_buf[6*6]); |
| ulltoa6_and_space(s->stack , &line_buf[7*6]); |
| line_buf[8*6] = '\0'; |
| if (scr_width > (int)MIN_WIDTH) { |
| read_cmdline(&line_buf[8*6], scr_width - MIN_WIDTH, s->pid, s->comm); |
| } |
| printf("\n""%.*s", scr_width, line_buf); |
| s++; |
| } |
| bb_putchar(OPT_BATCH_MODE ? '\n' : '\r'); |
| fflush_all(); |
| #undef HDR_STR |
| #undef MIN_WIDTH |
| } |
| |
| #else |
| void display_topmem_process_list(int lines_rem, int scr_width); |
| int topmem_sort(char *a, char *b); |
| #endif /* TOPMEM */ |
| |
| /* |
| * end TOPMEM support |
| */ |
| |
| enum { |
| TOP_MASK = 0 |
| | PSSCAN_PID |
| | PSSCAN_PPID |
| | PSSCAN_VSZ |
| | PSSCAN_STIME |
| | PSSCAN_UTIME |
| | PSSCAN_STATE |
| | PSSCAN_COMM |
| | PSSCAN_CPU |
| | PSSCAN_UIDGID, |
| TOPMEM_MASK = 0 |
| | PSSCAN_PID |
| | PSSCAN_SMAPS |
| | PSSCAN_COMM, |
| EXIT_MASK = 0, |
| NO_RESCAN_MASK = (unsigned)-1, |
| }; |
| |
| #if ENABLE_FEATURE_TOP_INTERACTIVE |
| static unsigned handle_input(unsigned scan_mask, duration_t interval) |
| { |
| if (option_mask32 & OPT_EOF) { |
| /* EOF on stdin ("top </dev/null") */ |
| sleep_for_duration(interval); |
| return scan_mask; |
| } |
| |
| while (1) { |
| int32_t c; |
| |
| c = read_key(STDIN_FILENO, G.kbd_input, interval * 1000); |
| if (c == -1 && errno != EAGAIN) { |
| /* error/EOF */ |
| option_mask32 |= OPT_EOF; |
| break; |
| } |
| interval = 0; |
| |
| if (c == initial_settings.c_cc[VINTR]) |
| return EXIT_MASK; |
| if (c == initial_settings.c_cc[VEOF]) |
| return EXIT_MASK; |
| |
| if (c == KEYCODE_UP) { |
| G_scroll_ofs--; |
| goto normalize_ofs; |
| } |
| if (c == KEYCODE_DOWN) { |
| G_scroll_ofs++; |
| goto normalize_ofs; |
| } |
| if (c == KEYCODE_HOME) { |
| G_scroll_ofs = 0; |
| goto normalize_ofs; |
| } |
| if (c == KEYCODE_END) { |
| G_scroll_ofs = ntop - G.lines / 2; |
| goto normalize_ofs; |
| } |
| if (c == KEYCODE_PAGEUP) { |
| G_scroll_ofs -= G.lines / 2; |
| goto normalize_ofs; |
| } |
| if (c == KEYCODE_PAGEDOWN) { |
| G_scroll_ofs += G.lines / 2; |
| normalize_ofs: |
| if (G_scroll_ofs >= ntop) |
| G_scroll_ofs = ntop - 1; |
| if (G_scroll_ofs < 0) |
| G_scroll_ofs = 0; |
| return NO_RESCAN_MASK; |
| } |
| |
| c |= 0x20; /* lowercase */ |
| if (c == 'q') |
| return EXIT_MASK; |
| |
| if (c == 'n') { |
| IF_FEATURE_TOPMEM(scan_mask = TOP_MASK;) |
| sort_function[0] = pid_sort; |
| continue; |
| } |
| if (c == 'm') { |
| IF_FEATURE_TOPMEM(scan_mask = TOP_MASK;) |
| sort_function[0] = mem_sort; |
| # if ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE |
| sort_function[1] = pcpu_sort; |
| sort_function[2] = time_sort; |
| # endif |
| continue; |
| } |
| # if ENABLE_FEATURE_SHOW_THREADS |
| if (c == 'h' |
| IF_FEATURE_TOPMEM(&& scan_mask != TOPMEM_MASK) |
| ) { |
| scan_mask ^= PSSCAN_TASKS; |
| continue; |
| } |
| # endif |
| # if ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE |
| if (c == 'p') { |
| IF_FEATURE_TOPMEM(scan_mask = TOP_MASK;) |
| sort_function[0] = pcpu_sort; |
| sort_function[1] = mem_sort; |
| sort_function[2] = time_sort; |
| continue; |
| } |
| if (c == 't') { |
| IF_FEATURE_TOPMEM(scan_mask = TOP_MASK;) |
| sort_function[0] = time_sort; |
| sort_function[1] = mem_sort; |
| sort_function[2] = pcpu_sort; |
| continue; |
| } |
| # if ENABLE_FEATURE_TOPMEM |
| if (c == 's') { |
| scan_mask = TOPMEM_MASK; |
| free(prev_hist); |
| prev_hist = NULL; |
| prev_hist_count = 0; |
| sort_field = (sort_field + 1) % NUM_SORT_FIELD; |
| continue; |
| } |
| # endif |
| if (c == 'r') { |
| inverted ^= 1; |
| continue; |
| } |
| # if ENABLE_FEATURE_TOP_SMP_CPU |
| /* procps-2.0.18 uses 'C', 3.2.7 uses '1' */ |
| if (c == 'c' || c == '1') { |
| /* User wants to toggle per cpu <> aggregate */ |
| if (smp_cpu_info) { |
| free(cpu_prev_jif); |
| free(cpu_jif); |
| cpu_jif = &cur_jif; |
| cpu_prev_jif = &prev_jif; |
| } else { |
| /* Prepare for xrealloc() */ |
| cpu_jif = cpu_prev_jif = NULL; |
| } |
| num_cpus = 0; |
| smp_cpu_info = !smp_cpu_info; |
| get_jiffy_counts(); |
| continue; |
| } |
| # endif |
| # endif |
| break; /* unknown key -> force refresh */ |
| } |
| |
| return scan_mask; |
| } |
| #endif |
| |
| //usage:#if ENABLE_FEATURE_SHOW_THREADS || ENABLE_FEATURE_TOP_SMP_CPU |
| //usage:# define IF_SHOW_THREADS_OR_TOP_SMP(...) __VA_ARGS__ |
| //usage:#else |
| //usage:# define IF_SHOW_THREADS_OR_TOP_SMP(...) |
| //usage:#endif |
| //usage:#define top_trivial_usage |
| //usage: "[-b] [-nCOUNT] [-dSECONDS]" IF_FEATURE_TOPMEM(" [-m]") |
| //usage:#define top_full_usage "\n\n" |
| //usage: "Provide a view of process activity in real time." |
| //usage: "\n""Read the status of all processes from /proc each SECONDS" |
| //usage: "\n""and display a screenful of them." |
| //usage: "\n" |
| //usage: IF_FEATURE_TOP_INTERACTIVE( |
| //usage: "Keys:" |
| //usage: "\n"" N/M" |
| //usage: IF_FEATURE_TOP_CPU_USAGE_PERCENTAGE("/P") |
| //usage: IF_FEATURE_TOP_CPU_USAGE_PERCENTAGE("/T") |
| //usage: ": " IF_FEATURE_TOPMEM("show CPU usage, ") "sort by pid/mem" |
| //usage: IF_FEATURE_TOP_CPU_USAGE_PERCENTAGE("/cpu") |
| //usage: IF_FEATURE_TOP_CPU_USAGE_PERCENTAGE("/time") |
| //usage: IF_FEATURE_TOPMEM( |
| //usage: "\n"" S: show memory" |
| //usage: ) |
| //usage: "\n"" R: reverse sort" |
| //usage: IF_SHOW_THREADS_OR_TOP_SMP( |
| //usage: "\n"" " |
| //usage: IF_FEATURE_SHOW_THREADS("H: toggle threads") |
| //usage: IF_FEATURE_SHOW_THREADS(IF_FEATURE_TOP_SMP_CPU(", ")) |
| //usage: IF_FEATURE_TOP_SMP_CPU("1: toggle SMP") |
| //usage: ) |
| //usage: "\n"" Q,^C: exit" |
| //usage: "\n" |
| //usage: "\n""Options:" |
| //usage: ) |
| //usage: "\n"" -b Batch mode" |
| //usage: "\n"" -n N Exit after N iterations" |
| //usage: "\n"" -d N Delay between updates" |
| //usage: IF_FEATURE_TOPMEM( |
| //usage: "\n"" -m Same as 's' key" |
| //usage: ) |
| |
| /* Interactive testing: |
| * echo sss | ./busybox top |
| * - shows memory screen |
| * echo sss | ./busybox top -bn1 >mem |
| * - saves memory screen - the *whole* list, not first NROWS processes! |
| * echo .m.s.s.s.s.s.s.q | ./busybox top -b >z |
| * - saves several different screens, and exits |
| * |
| * TODO: -i STRING param as a better alternative? |
| */ |
| |
| int top_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; |
| int top_main(int argc UNUSED_PARAM, char **argv) |
| { |
| duration_t interval; |
| int iterations; |
| unsigned col; |
| char *str_interval, *str_iterations; |
| unsigned scan_mask = TOP_MASK; |
| |
| INIT_G(); |
| |
| interval = 5; /* default update interval is 5 seconds */ |
| iterations = 0; /* infinite */ |
| #if ENABLE_FEATURE_TOP_SMP_CPU |
| /*num_cpus = 0;*/ |
| /*smp_cpu_info = 0;*/ /* to start with show aggregate */ |
| cpu_jif = &cur_jif; |
| cpu_prev_jif = &prev_jif; |
| #endif |
| |
| /* all args are options; -n NUM */ |
| make_all_argv_opts(argv); /* options can be specified w/o dash */ |
| col = getopt32(argv, "d:n:b"IF_FEATURE_TOPMEM("m"), &str_interval, &str_iterations); |
| #if ENABLE_FEATURE_TOPMEM |
| if (col & OPT_m) /* -m (busybox specific) */ |
| scan_mask = TOPMEM_MASK; |
| #endif |
| if (col & OPT_d) { |
| /* work around for "-d 1" -> "-d -1" done by make_all_argv_opts() */ |
| if (str_interval[0] == '-') |
| str_interval++; |
| interval = parse_duration_str(str_interval); |
| /* Need to limit it to not overflow poll timeout */ |
| if (interval > INT_MAX / 1000) |
| interval = INT_MAX / 1000; |
| } |
| if (col & OPT_n) { |
| if (str_iterations[0] == '-') |
| str_iterations++; |
| iterations = xatou(str_iterations); |
| } |
| |
| /* change to /proc */ |
| xchdir("/proc"); |
| |
| #if ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE |
| sort_function[0] = pcpu_sort; |
| sort_function[1] = mem_sort; |
| sort_function[2] = time_sort; |
| #else |
| sort_function[0] = mem_sort; |
| #endif |
| |
| if (OPT_BATCH_MODE) { |
| option_mask32 |= OPT_EOF; |
| } |
| #if ENABLE_FEATURE_TOP_INTERACTIVE |
| else { |
| /* Turn on unbuffered input; turn off echoing, ^C ^Z etc */ |
| set_termios_to_raw(STDIN_FILENO, &initial_settings, TERMIOS_CLEAR_ISIG); |
| die_func = reset_term; |
| } |
| |
| bb_signals(BB_FATAL_SIGS, sig_catcher); |
| |
| /* Eat initial input, if any */ |
| scan_mask = handle_input(scan_mask, 0); |
| #endif |
| |
| while (scan_mask != EXIT_MASK) { |
| IF_FEATURE_TOP_INTERACTIVE(unsigned new_mask;) |
| procps_status_t *p = NULL; |
| |
| if (OPT_BATCH_MODE) { |
| G.lines = INT_MAX; |
| col = LINE_BUF_SIZE - 2; /* +2 bytes for '\n', NUL */ |
| } else { |
| G.lines = 24; /* default */ |
| col = 79; |
| /* We output to stdout, we need size of stdout (not stdin)! */ |
| get_terminal_width_height(STDOUT_FILENO, &col, &G.lines); |
| if (G.lines < 5 || col < 10) { |
| sleep_for_duration(interval); |
| continue; |
| } |
| if (col > LINE_BUF_SIZE - 2) |
| col = LINE_BUF_SIZE - 2; |
| } |
| |
| /* read process IDs & status for all the processes */ |
| ntop = 0; |
| while ((p = procps_scan(p, scan_mask)) != NULL) { |
| int n; |
| |
| IF_FEATURE_TOPMEM(if (scan_mask != TOPMEM_MASK)) { |
| n = ntop; |
| top = xrealloc_vector(top, 6, ntop++); |
| top[n].pid = p->pid; |
| top[n].ppid = p->ppid; |
| top[n].vsz = p->vsz; |
| #if ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE |
| top[n].ticks = p->stime + p->utime; |
| #endif |
| top[n].uid = p->uid; |
| strcpy(top[n].state, p->state); |
| strcpy(top[n].comm, p->comm); |
| #if ENABLE_FEATURE_TOP_SMP_PROCESS |
| top[n].last_seen_on_cpu = p->last_seen_on_cpu; |
| #endif |
| } |
| #if ENABLE_FEATURE_TOPMEM |
| else { /* TOPMEM */ |
| if (!(p->smaps.mapped_ro | p->smaps.mapped_rw)) |
| continue; /* kernel threads are ignored */ |
| n = ntop; |
| /* No bug here - top and topmem are the same */ |
| top = xrealloc_vector(topmem, 6, ntop++); |
| strcpy(topmem[n].comm, p->comm); |
| topmem[n].pid = p->pid; |
| topmem[n].vsz = p->smaps.mapped_rw + p->smaps.mapped_ro; |
| topmem[n].vszrw = p->smaps.mapped_rw; |
| topmem[n].rss_sh = p->smaps.shared_clean + p->smaps.shared_dirty; |
| topmem[n].rss = p->smaps.private_clean + p->smaps.private_dirty + topmem[n].rss_sh; |
| topmem[n].dirty = p->smaps.private_dirty + p->smaps.shared_dirty; |
| topmem[n].dirty_sh = p->smaps.shared_dirty; |
| topmem[n].stack = p->smaps.stack; |
| } |
| #endif |
| } /* end of "while we read /proc" */ |
| if (ntop == 0) { |
| bb_error_msg("no process info in /proc"); |
| break; |
| } |
| |
| IF_FEATURE_TOPMEM(if (scan_mask != TOPMEM_MASK)) { |
| #if ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE |
| if (!prev_hist_count) { |
| do_stats(); |
| usleep(100000); |
| clearmems(); |
| continue; |
| } |
| do_stats(); |
| /* TODO: we don't need to sort all 10000 processes, we need to find top 24! */ |
| qsort(top, ntop, sizeof(top_status_t), (void*)mult_lvl_cmp); |
| #else |
| qsort(top, ntop, sizeof(top_status_t), (void*)(sort_function[0])); |
| #endif |
| } |
| #if ENABLE_FEATURE_TOPMEM |
| else { /* TOPMEM */ |
| qsort(topmem, ntop, sizeof(topmem_status_t), (void*)topmem_sort); |
| } |
| #endif |
| IF_FEATURE_TOP_INTERACTIVE(display:) |
| IF_FEATURE_TOPMEM(if (scan_mask != TOPMEM_MASK)) { |
| display_process_list(G.lines, col); |
| } |
| #if ENABLE_FEATURE_TOPMEM |
| else { /* TOPMEM */ |
| display_topmem_process_list(G.lines, col); |
| } |
| #endif |
| if (iterations >= 0 && !--iterations) |
| break; |
| #if !ENABLE_FEATURE_TOP_INTERACTIVE |
| clearmems(); |
| sleep_for_duration(interval); |
| #else |
| new_mask = handle_input(scan_mask, interval); |
| if (new_mask == NO_RESCAN_MASK) |
| goto display; |
| scan_mask = new_mask; |
| clearmems(); |
| #endif |
| } /* end of "while (not Q)" */ |
| |
| bb_putchar('\n'); |
| #if ENABLE_FEATURE_TOP_INTERACTIVE |
| reset_term(); |
| #endif |
| if (ENABLE_FEATURE_CLEAN_UP) { |
| clearmems(); |
| #if ENABLE_FEATURE_TOP_CPU_USAGE_PERCENTAGE |
| free(prev_hist); |
| #endif |
| } |
| return EXIT_SUCCESS; |
| } |