blob: 467e23a4d81aebbda0fcba7cab6f31d05f14c0d8 [file] [log] [blame]
/*
* Copyright (C) 2017 Denys Vlasenko <vda.linux@googlemail.com>
*
* Licensed under GPLv2, see file LICENSE in this source tree.
*/
//config:config FACTOR
//config: bool "factor (2.6 kb)"
//config: default y
//config: help
//config: factor factorizes integers
//applet:IF_FACTOR(APPLET(factor, BB_DIR_USR_BIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_FACTOR) += factor.o
//usage:#define factor_trivial_usage
//usage: "[NUMBER]..."
//usage:#define factor_full_usage "\n\n"
//usage: "Print prime factors"
#include "libbb.h"
#if 0
# define dbg(...) bb_error_msg(__VA_ARGS__)
#else
# define dbg(...) ((void)0)
#endif
typedef unsigned long long wide_t;
#if ULLONG_MAX == (UINT_MAX * UINT_MAX + 2 * UINT_MAX)
/* "unsigned" is half as wide as ullong */
typedef unsigned half_t;
#define HALF_MAX UINT_MAX
#define HALF_FMT ""
#elif ULLONG_MAX == (ULONG_MAX * ULONG_MAX + 2 * ULONG_MAX)
/* long is half as wide as ullong */
typedef unsigned long half_t;
#define HALF_MAX ULONG_MAX
#define HALF_FMT "l"
#else
#error Cant find an integer type which is half as wide as ullong
#endif
static half_t isqrt_odd(wide_t N)
{
half_t s = isqrt(N);
/* Subtract 1 from even s, odd s won't change: */
/* (doesnt work for zero, but we know that s != 0 here) */
s = (s - 1) | 1;
return s;
}
static NOINLINE void factorize(wide_t N)
{
half_t factor;
half_t max_factor;
// unsigned count3;
// unsigned count5;
// unsigned count7;
// ^^^^^^^^^^^^^^^ commented-out simple sieving code (easier to grasp).
// Faster sieving, using one word for potentially up to 6 counters:
// count upwards in each mask, counter "triggers" when it sets its mask to "100[0]..."
// 10987654321098765432109876543210 - bits 31-0 in 32-bit word
// 17777713333311111777775555333 - bit masks for counters for primes 3,5,7,11,13,17
// 100000100001000010001001 - value for adding 1 to each mask
// 10000010000010000100001000100 - value for checking that any mask reached msb
enum {
SHIFT_3 = 1 << 0,
SHIFT_5 = 1 << 3,
SHIFT_7 = 1 << 7,
INCREMENT_EACH = SHIFT_3 | SHIFT_5 | SHIFT_7,
MULTIPLE_OF_3 = 1 << 2,
MULTIPLE_OF_5 = 1 << 6,
MULTIPLE_OF_7 = 1 << 11,
MULTIPLE_DETECTED = MULTIPLE_OF_3 | MULTIPLE_OF_5 | MULTIPLE_OF_7,
};
unsigned sieve_word;
if (N < 4)
goto end;
while (!(N & 1)) {
printf(" 2");
N >>= 1;
}
/* The code needs to be optimized for the case where
* there are large prime factors. For example,
* this is not hard:
* 8262075252869367027 = 3 7 17 23 47 101 113 127 131 137 823
* (the largest factor to test is only ~sqrt(823) = 28)
* but this is:
* 18446744073709551601 = 53 348051774975651917
* the last factor requires testing up to
* 589959129 - about 100 million iterations.
* The slowest case (largest prime) for N < 2^64 is
* factor 18446744073709551557 (0xffffffffffffffc5).
*/
max_factor = isqrt_odd(N);
// count3 = 3;
// count5 = 6;
// count7 = 9;
sieve_word = 0
/* initial count for SHIFT_n is (n-1)/2*3: */
+ (MULTIPLE_OF_3 - 3 * SHIFT_3)
+ (MULTIPLE_OF_5 - 6 * SHIFT_5)
+ (MULTIPLE_OF_7 - 9 * SHIFT_7)
//+ (MULTIPLE_OF_11 - 15 * SHIFT_11)
//+ (MULTIPLE_OF_13 - 18 * SHIFT_13)
//+ (MULTIPLE_OF_17 - 24 * SHIFT_17)
;
factor = 3;
for (;;) {
/* The division is the most costly part of the loop.
* On 64bit CPUs, takes at best 12 cycles, often ~20.
*/
while ((N % factor) == 0) { /* not likely */
N = N / factor;
printf(" %"HALF_FMT"u", factor);
max_factor = isqrt_odd(N);
}
next_factor:
if (factor >= max_factor)
break;
factor += 2;
/* Rudimentary wheel sieving: skip multiples of 3, 5 and 7:
* Every third odd number is divisible by three and thus isn't a prime:
* 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47...
* ^ ^ ^ ^ ^ ^ ^ _ ^ ^ _ ^ ^ ^ ^
* (^ = primes, _ = would-be-primes-if-not-divisible-by-5)
* The numbers with space under them are excluded by sieve 3.
*/
// count7--;
// count5--;
// count3--;
// if (count3 && count5 && count7)
// continue;
sieve_word += INCREMENT_EACH;
if (!(sieve_word & MULTIPLE_DETECTED))
continue;
/*
* "factor" is multiple of 3 33% of the time (count3 reached 0),
* else, multiple of 5 13% of the time,
* else, multiple of 7 7.6% of the time.
* Cumulatively, with 3,5,7 sieving we are here 54.3% of the time.
*/
// if (count3 == 0)
// count3 = 3;
if (sieve_word & MULTIPLE_OF_3)
sieve_word -= SHIFT_3 * 3;
// if (count5 == 0)
// count5 = 5;
if (sieve_word & MULTIPLE_OF_5)
sieve_word -= SHIFT_5 * 5;
// if (count7 == 0)
// count7 = 7;
if (sieve_word & MULTIPLE_OF_7)
sieve_word -= SHIFT_7 * 7;
goto next_factor;
}
end:
if (N > 1)
printf(" %llu", N);
bb_putchar('\n');
}
static void factorize_numstr(const char *numstr)
{
wide_t N;
/* Leading + is ok (coreutils compat) */
if (*numstr == '+')
numstr++;
N = bb_strtoull(numstr, NULL, 10);
if (errno)
bb_show_usage();
printf("%llu:", N);
factorize(N);
}
int factor_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int factor_main(int argc UNUSED_PARAM, char **argv)
{
//// coreutils has undocumented option ---debug (three dashes)
//getopt32(argv, "");
//argv += optind;
argv++;
if (!*argv) {
/* Read from stdin, several numbers per line are accepted */
for (;;) {
char *numstr, *line;
line = xmalloc_fgetline(stdin);
if (!line)
return EXIT_SUCCESS;
numstr = line;
for (;;) {
char *end;
numstr = skip_whitespace(numstr);
if (!numstr[0])
break;
end = skip_non_whitespace(numstr);
if (*end != '\0')
*end++ = '\0';
factorize_numstr(numstr);
numstr = end;
}
free(line);
}
}
do {
/* Leading spaces are ok (coreutils compat) */
factorize_numstr(skip_whitespace(*argv));
} while (*++argv);
return EXIT_SUCCESS;
}