| /* vi: set sw=4 ts=4: */ |
| // This file defines the feature set to be compiled into busybox. |
| // When you turn things off here, they won't be compiled in at all. |
| // |
| //// This file is parsed by sed. You MUST use single line comments. |
| // i.e., //#define CONFIG_BLAH |
| // |
| // |
| // BusyBox Applications |
| //#define CONFIG_ADJTIMEX |
| #define CONFIG_AR |
| #define CONFIG_ASH |
| #define CONFIG_BASENAME |
| #define CONFIG_CAT |
| #define CONFIG_CHGRP |
| #define CONFIG_CHMOD |
| #define CONFIG_CHOWN |
| #define CONFIG_CHROOT |
| #define CONFIG_CHVT |
| #define CONFIG_CLEAR |
| #define CONFIG_CMP |
| #define CONFIG_CP |
| #define CONFIG_CPIO |
| #define CONFIG_CUT |
| #define CONFIG_DATE |
| #define CONFIG_DC |
| #define CONFIG_DD |
| #define CONFIG_DEALLOCVT |
| #define CONFIG_DF |
| #define CONFIG_DIRNAME |
| #define CONFIG_DMESG |
| #define CONFIG_DOS2UNIX |
| #define CONFIG_DPKG |
| #define CONFIG_DPKG_DEB |
| #define CONFIG_DUTMP |
| #define CONFIG_DU |
| #define CONFIG_DUMPKMAP |
| #define CONFIG_ECHO |
| #define CONFIG_ENV |
| #define CONFIG_EXPR |
| #define CONFIG_FBSET |
| #define CONFIG_FDFLUSH |
| #define CONFIG_FIND |
| #define CONFIG_FREE |
| #define CONFIG_FREERAMDISK |
| #define CONFIG_FSCK_MINIX |
| #define CONFIG_GETOPT |
| #define CONFIG_GREP |
| #define CONFIG_GUNZIP |
| #define CONFIG_GZIP |
| #define CONFIG_HALT |
| #define CONFIG_HEAD |
| #define CONFIG_HOSTID |
| #define CONFIG_HOSTNAME |
| //#define CONFIG_HUSH |
| #define CONFIG_ID |
| #define CONFIG_IFCONFIG |
| #define CONFIG_INIT |
| //#define CONFIG_INSMOD |
| #define CONFIG_KILL |
| #define CONFIG_KILLALL |
| #define CONFIG_KLOGD |
| //#define CONFIG_LASH |
| #define CONFIG_LENGTH |
| #define CONFIG_LN |
| #define CONFIG_LOADACM |
| #define CONFIG_LOADFONT |
| #define CONFIG_LOADKMAP |
| #define CONFIG_LOGGER |
| #define CONFIG_LOGNAME |
| #define CONFIG_LS |
| #define CONFIG_LSMOD |
| #define CONFIG_MAKEDEVS |
| #define CONFIG_MD5SUM |
| #define CONFIG_MKDIR |
| #define CONFIG_MKFIFO |
| #define CONFIG_MKFS_MINIX |
| #define CONFIG_MKNOD |
| #define CONFIG_MKSWAP |
| #define CONFIG_MKTEMP |
| //#define CONFIG_MODPROBE |
| #define CONFIG_MORE |
| #define CONFIG_MOUNT |
| //#define CONFIG_MSH |
| #define CONFIG_MT |
| #define CONFIG_MV |
| #define CONFIG_NC |
| #define CONFIG_NSLOOKUP |
| #define CONFIG_PIDOF |
| #define CONFIG_PING |
| #define CONFIG_PIVOT_ROOT |
| #define CONFIG_POWEROFF |
| #define CONFIG_PRINTF |
| #define CONFIG_PS |
| #define CONFIG_PWD |
| #define CONFIG_RDATE |
| #define CONFIG_READLINK |
| #define CONFIG_REBOOT |
| #define CONFIG_RENICE |
| #define CONFIG_RESET |
| #define CONFIG_RM |
| #define CONFIG_RMDIR |
| #define CONFIG_RMMOD |
| #define CONFIG_ROUTE |
| #define CONFIG_RPM2CPIO |
| #define CONFIG_SED |
| #define CONFIG_SETKEYCODES |
| #define CONFIG_SLEEP |
| #define CONFIG_SORT |
| #define CONFIG_STTY |
| #define CONFIG_SWAPONOFF |
| #define CONFIG_SYNC |
| #define CONFIG_SYSLOGD |
| #define CONFIG_TAIL |
| #define CONFIG_TAR |
| #define CONFIG_TEE |
| #define CONFIG_TEST |
| #define CONFIG_TELNET |
| #define CONFIG_TFTP |
| #define CONFIG_TOUCH |
| #define CONFIG_TR |
| #define CONFIG_TRACEROUTE |
| #define CONFIG_TRUE_FALSE |
| #define CONFIG_TTY |
| #define CONFIG_UNIX2DOS |
| #define CONFIG_UUENCODE |
| #define CONFIG_UUDECODE |
| #define CONFIG_UMOUNT |
| #define CONFIG_UNIQ |
| #define CONFIG_UNAME |
| #define CONFIG_UPDATE |
| #define CONFIG_UPTIME |
| #define CONFIG_USLEEP |
| #define CONFIG_VI |
| #define CONFIG_WATCHDOG |
| #define CONFIG_WC |
| #define CONFIG_WGET |
| #define CONFIG_WHICH |
| #define CONFIG_WHOAMI |
| #define CONFIG_XARGS |
| #define CONFIG_YES |
| // End of Applications List |
| // |
| // |
| // |
| // --------------------------------------------------------- |
| // This is where feature definitions go. Generally speaking, |
| // turning this stuff off makes things a bit smaller (and less |
| // pretty/useful). |
| // |
| // |
| // If you enabled one or more of the shells, you may select which one |
| // should be run when sh is invoked: |
| #define CONFIG_FEATURE_SH_IS_ASH |
| //#define CONFIG_FEATURE_SH_IS_HUSH |
| //#define CONFIG_FEATURE_SH_IS_LASH |
| //#define CONFIG_FEATURE_SH_IS_MSH |
| // |
| // BusyBox will, by default, malloc space for its buffers. This costs code |
| // size for the call to xmalloc. You can use the following feature to have |
| // them put on the stack. For some very small machines with limited stack |
| // space, this can be deadly. For most folks, this works just fine... |
| //#define CONFIG_FEATURE_BUFFERS_GO_ON_STACK |
| // The third alternative for buffer allocation is to use BSS. This works |
| // beautifully for computers with a real MMU (and OS support), but wastes |
| // runtime RAM for uCLinux. This behavior was the only one available for |
| // BusyBox versions 0.48 and earlier. |
| //#define CONFIG_FEATURE_BUFFERS_GO_IN_BSS |
| // |
| // Turn this on to use Erik's very cool devps, and devmtab kernel drivers, |
| // thereby eliminating the need for the /proc filesystem and thereby saving |
| // lots and lots memory for more important things. NOTE: If you enable this |
| // feature, you _must_ have patched the kernel to include the devps patch that |
| // is included in the busybox/kernel-patches directory. You will also need to |
| // create some device special files in /dev on your embedded system: |
| // mknod /dev/mtab c 10 22 |
| // mknod /dev/ps c 10 21 |
| // I emailed Linus and this patch will not be going into the stock kernel. |
| //#define CONFIG_FEATURE_USE_DEVPS_PATCH |
| // |
| // show verbose usage messages |
| #define CONFIG_FEATURE_VERBOSE_USAGE |
| // |
| // Use termios to manipulate the screen ('more' is prettier with this on) |
| #define CONFIG_FEATURE_USE_TERMIOS |
| // |
| // calculate terminal & column widths (for more and ls) |
| #define CONFIG_FEATURE_AUTOWIDTH |
| // |
| // show username/groupnames for ls |
| #define CONFIG_FEATURE_LS_USERNAME |
| // |
| // show file timestamps in ls |
| #define CONFIG_FEATURE_LS_TIMESTAMPS |
| // |
| // enable ls -p and -F |
| #define CONFIG_FEATURE_LS_FILETYPES |
| // |
| // sort the file names |
| #define CONFIG_FEATURE_LS_SORTFILES |
| // |
| // enable ls -R |
| #define CONFIG_FEATURE_LS_RECURSIVE |
| // |
| // enable ls -L |
| #define CONFIG_FEATURE_LS_FOLLOWLINKS |
| // |
| // Disable for a smaller (but less functional) ping |
| #define CONFIG_FEATURE_FANCY_PING |
| // |
| // Make init use a simplified /etc/inittab file (recommended). |
| #define CONFIG_FEATURE_USE_INITTAB |
| // |
| //Enable init being called as /linuxrc |
| #define CONFIG_FEATURE_INITRD |
| // |
| //Have init enable core dumping for child processes (for debugging only) |
| //#define CONFIG_FEATURE_INIT_COREDUMPS |
| // |
| //Make sure nothing is printed to the console on boot |
| //#define CONFIG_FEATURE_EXTRA_QUIET |
| // |
| // enable syslogd -R remotehost |
| #define CONFIG_FEATURE_REMOTE_LOG |
| // |
| // enable syslogd -C |
| //#define CONFIG_FEATURE_IPC_SYSLOG |
| // |
| //Disable for a simple tail implementation (2.34k vs 3k for the full one). |
| //Both provide 'tail -f', but this cuts out -c, -q, -s, and -v. |
| #define CONFIG_FEATURE_FANCY_TAIL |
| // |
| // Enable support for loop devices in mount |
| #define CONFIG_FEATURE_MOUNT_LOOP |
| // |
| // Enable support for a real /etc/mtab file instead of /proc/mounts |
| //#define CONFIG_FEATURE_MTAB_SUPPORT |
| // |
| // Enable support for mounting remote NFS volumes. |
| // You may need to mount with "-o nolock" if you are |
| // not running a local portmapper daemon... |
| #define CONFIG_FEATURE_NFSMOUNT |
| // |
| // Enable support forced filesystem unmounting |
| // (i.e., in case of an unreachable NFS system). |
| #define CONFIG_FEATURE_MOUNT_FORCE |
| // |
| // Enable support for creation of tar files. |
| #define CONFIG_FEATURE_TAR_CREATE |
| // |
| // Enable support for "--exclude" and "-X" for excluding files |
| #define CONFIG_FEATURE_TAR_EXCLUDE |
| // |
| // Enable support for tar -z option (currently only works for inflating) |
| #define CONFIG_FEATURE_TAR_GZIP |
| // |
| // Enable reverse sort |
| #define CONFIG_FEATURE_SORT_REVERSE |
| // |
| // Enable uniqe sort |
| #define CONFIG_FEATURE_SORT_UNIQUE |
| // |
| // Enable command line editing in the shell. |
| // Only relevant if a shell is enabled. On by default. |
| #define CONFIG_FEATURE_COMMAND_EDITING |
| // |
| // Enable tab completion in the shell. This is now working quite nicely. |
| // This feature adds a bit over 4k. Only relevant if a shell is enabled. |
| #define CONFIG_FEATURE_COMMAND_TAB_COMPLETION |
| // |
| // Attempts to match usernames in a ~-prefixed path |
| //#define CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION |
| // |
| //Allow the shell to invoke all the compiled in BusyBox applets as if they |
| //were shell builtins. Nice for staticly linking an emergency rescue shell, |
| //among other things. Off by default. |
| // Only relevant if a shell is enabled. |
| #define CONFIG_FEATURE_SH_STANDALONE_SHELL |
| // |
| //When this is enabled, busybox shell applets can be called using full path |
| //names. This causes applets (i.e., most busybox commands) to override |
| //real commands on the filesystem. For example, if you run run /bin/cat, it |
| //will use BusyBox cat even if /bin/cat exists on the filesystem and is _not_ |
| //busybox. Some systems want this, others do not. Choose wisely. :-) This |
| //only has meaning when CONFIG_FEATURE_SH_STANDALONE_SHELL is enabled. |
| // Only relevant if a shell is enabled. Off by default. |
| #define CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN |
| // |
| // Uncomment this option for a fancy shell prompt that includes the |
| // current username and hostname. On systems that don't have usernames |
| // or hostnames, this can look hideous. |
| // Only relevant if a shell is enabled. |
| #define CONFIG_FEATURE_SH_FANCY_PROMPT |
| // |
| //Turn on extra fbset options |
| //#define CONFIG_FEATURE_FBSET_FANCY |
| // |
| //Turn on fbset readmode support |
| //#define CONFIG_FEATURE_FBSET_READMODE |
| // |
| // Support insmod/lsmod/rmmod for post 2.1 kernels |
| #define CONFIG_FEATURE_NEW_MODULE_INTERFACE |
| // |
| // Support insmod/lsmod/rmmod for pre 2.1 kernels |
| //#define CONFIG_FEATURE_OLD_MODULE_INTERFACE |
| // |
| // Support module version checking |
| //#define CONFIG_FEATURE_INSMOD_VERSION_CHECKING |
| // |
| // Support for uClinux memory usage optimization, which will load the image |
| // directly into the kernel memory. This divides memory requrements by three. |
| // If you are not running uClinux (i.e., your CPU has an MMU) leave this |
| // disabled... |
| //#define CONFIG_FEATURE_INSMOD_LOADINKMEM |
| // |
| // Support for Minix filesystem, version 2 |
| //#define CONFIG_FEATURE_MINIX2 |
| // |
| // Enable ifconfig status reporting output -- this feature adds 12k. |
| #define CONFIG_FEATURE_IFCONFIG_STATUS |
| // |
| // Enable ifconfig slip-specific options "keepalive" and "outfill" |
| //#define CONFIG_FEATURE_IFCONFIG_SLIP |
| // |
| // Enable ifconfig options "mem_start", "io_addr", and "irq". |
| //#define CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ |
| // |
| // Enable ifconfig option "hw". Currently works for only with "ether". |
| #define CONFIG_FEATURE_IFCONFIG_HW |
| // |
| // Enable busybox --install [-s] |
| // to create links (or symlinks) for all the commands that are |
| // compiled into the binary. (needs /proc filesystem) |
| #define CONFIG_FEATURE_INSTALLER |
| // |
| // Enable a nifty progress meter in wget (adds just under 2k) |
| #define CONFIG_FEATURE_WGET_STATUSBAR |
| // |
| // Enable HTTP authentication in wget |
| #define CONFIG_FEATURE_WGET_AUTHENTICATION |
| // |
| // Clean up all memory before exiting -- usually not needed |
| // as the OS can clean up... Don't enable this unless you |
| // have a really good reason for cleaning things up manually. |
| //#define CONFIG_FEATURE_CLEAN_UP |
| // |
| // Support for human readable output by ls, du, etc.(example 13k, 23M, 235G) |
| #define CONFIG_FEATURE_HUMAN_READABLE |
| // |
| // Support for the find -type option. |
| #define CONFIG_FEATURE_FIND_TYPE |
| // |
| // Support for the find -perm option. |
| #define CONFIG_FEATURE_FIND_PERM |
| // |
| // Support for the find -mtine option. |
| #define CONFIG_FEATURE_FIND_MTIME |
| // |
| // Support for the -A -B and -C context flags in grep |
| //#define CONFIG_FEATURE_GREP_CONTEXT |
| // |
| // Support for the EGREP applet (alias to the grep applet) |
| //#define CONFIG_FEATURE_GREP_EGREP_ALIAS |
| // |
| // Tell tftp what commands that should be supported. |
| #define CONFIG_FEATURE_TFTP_PUT |
| #define CONFIG_FEATURE_TFTP_GET |
| // |
| // features for vi |
| #define CONFIG_FEATURE_VI_COLON // ":" colon commands, no "ex" mode |
| #define CONFIG_FEATURE_VI_YANKMARK // Yank/Put commands and Mark cmds |
| #define CONFIG_FEATURE_VI_SEARCH // search and replace cmds |
| #define CONFIG_FEATURE_VI_USE_SIGNALS // catch signals |
| #define CONFIG_FEATURE_VI_DOT_CMD // remember previous cmd and "." cmd |
| #define CONFIG_FEATURE_VI_READONLY // vi -R and "view" mode |
| #define CONFIG_FEATURE_VI_SETOPTS // set-able options, ai ic showmatch |
| #define CONFIG_FEATURE_VI_SET // :set |
| #define CONFIG_FEATURE_VI_WIN_RESIZE // handle window resize |
| // |
| // Enable a if you system have setuped locale |
| //#define CONFIG_LOCALE_SUPPORT |
| // |
| // Support for TELNET to pass TERM type to remote host. Adds 384 bytes. |
| #define CONFIG_FEATURE_TELNET_TTYPE |
| // |
| // End of Features List |
| // |
| // |
| // |
| // |
| // |
| // |
| //--------------------------------------------------- |
| // Nothing beyond this point should ever be touched by |
| // mere mortals so leave this stuff alone. |
| // |
| #include <features.h> |
| #if defined __UCLIBC__ && ! defined __UCLIBC_HAS_MMU__ |
| #undef CONFIG_RPM2CPIO /* Uses gz_open(), which uses fork() */ |
| #undef CONFIG_DPKG_DEB /* Uses gz_open(), which uses fork() */ |
| #undef CONFIG_ASH /* Uses fork() */ |
| #undef CONFIG_HUSH /* Uses fork() */ |
| #undef CONFIG_LASH /* Uses fork() */ |
| #undef CONFIG_INIT /* Uses fork() */ |
| #undef CONFIG_FEATURE_TAR_GZIP /* Uses fork() */ |
| #undef CONFIG_SYSLOGD /* Uses daemon() */ |
| #undef CONFIG_KLOGD /* Uses daemon() */ |
| #undef CONFIG_UPDATE /* Uses daemon() */ |
| #endif |
| #if defined CONFIG_ASH || defined CONFIG_HUSH || defined CONFIG_LASH || defined CONFIG_MSH |
| #if defined CONFIG_FEATURE_COMMAND_EDITING |
| #define CONFIG_CMDEDIT |
| #else |
| #undef CONFIG_FEATURE_COMMAND_EDITING |
| #undef CONFIG_FEATURE_COMMAND_TAB_COMPLETION |
| #undef CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION |
| #undef CONFIG_FEATURE_SH_FANCY_PROMPT |
| #endif |
| #else |
| #undef CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN |
| #undef CONFIG_FEATURE_SH_STANDALONE_SHELL |
| #undef CONFIG_FEATURE_SH_FANCY_PROMPT |
| #endif |
| // |
| #ifdef CONFIG_KILLALL |
| #ifndef CONFIG_KILL |
| #define CONFIG_KILL |
| #endif |
| #endif |
| // |
| #ifndef CONFIG_INIT |
| #undef CONFIG_FEATURE_INITRD |
| #endif |
| // |
| #if defined CONFIG_MOUNT && defined CONFIG_FEATURE_NFSMOUNT |
| #define CONFIG_NFSMOUNT |
| #endif |
| // |
| #if defined CONFIG_FEATURE_AUTOWIDTH |
| #ifndef CONFIG_FEATURE_USE_TERMIOS |
| #define CONFIG_FEATURE_USE_TERMIOS |
| #endif |
| #endif |
| // |
| #if defined CONFIG_INSMOD || defined CONFIG_LSMOD |
| #if ! defined CONFIG_FEATURE_NEW_MODULE_INTERFACE && ! defined CONFIG_FEATURE_OLD_MODULE_INTERFACE |
| #define CONFIG_FEATURE_NEW_MODULE_INTERFACE |
| #endif |
| #endif |
| // |
| #ifdef CONFIG_UNIX2DOS |
| #define CONFIG_DOS2UNIX |
| #endif |
| // |
| #ifdef CONFIG_SYSLOGD |
| #if defined CONFIG_FEATURE_IPC_SYSLOG |
| #define CONFIG_LOGREAD |
| #endif |
| #endif |
| // |
| #if defined CONFIG_ASH && defined CONFIG_FEATURE_SH_IS_ASH |
| # define shell_main ash_main |
| #elif defined CONFIG_HUSH && defined CONFIG_FEATURE_SH_IS_HUSH |
| # define shell_main hush_main |
| #elif defined CONFIG_LASH && defined CONFIG_FEATURE_SH_IS_LASH |
| # define shell_main lash_main |
| #elif defined CONFIG_MSH && defined CONFIG_FEATURE_SH_IS_MSH |
| # define shell_main msh_main |
| #endif |
