| /* vi: set sw=4 ts=4: */ |
| #include "libbb.h" |
| |
| /* uncompress for busybox -- (c) 2002 Robert Griebl |
| * |
| * based on the original compress42.c source |
| * (see disclaimer below) |
| */ |
| |
| |
| /* (N)compress42.c - File compression ala IEEE Computer, Mar 1992. |
| * |
| * Authors: |
| * Spencer W. Thomas (decvax!harpo!utah-cs!utah-gr!thomas) |
| * Jim McKie (decvax!mcvax!jim) |
| * Steve Davies (decvax!vax135!petsd!peora!srd) |
| * Ken Turkowski (decvax!decwrl!turtlevax!ken) |
| * James A. Woods (decvax!ihnp4!ames!jaw) |
| * Joe Orost (decvax!vax135!petsd!joe) |
| * Dave Mack (csu@alembic.acs.com) |
| * Peter Jannesen, Network Communication Systems |
| * (peter@ncs.nl) |
| * |
| * marc@suse.de : a small security fix for a buffer overflow |
| * |
| * [... History snipped ...] |
| * |
| */ |
| #include <stdio.h> |
| #include <string.h> |
| #include <unistd.h> |
| |
| /* Default input buffer size */ |
| #define IBUFSIZ 2048 |
| |
| /* Default output buffer size */ |
| #define OBUFSIZ 2048 |
| |
| /* Defines for third byte of header */ |
| #define MAGIC_1 (char_type)'\037' /* First byte of compressed file */ |
| #define MAGIC_2 (char_type)'\235' /* Second byte of compressed file */ |
| #define BIT_MASK 0x1f /* Mask for 'number of compresssion bits' */ |
| /* Masks 0x20 and 0x40 are free. */ |
| /* I think 0x20 should mean that there is */ |
| /* a fourth header byte (for expansion). */ |
| #define BLOCK_MODE 0x80 /* Block compresssion if table is full and */ |
| /* compression rate is dropping flush tables */ |
| /* the next two codes should not be changed lightly, as they must not */ |
| /* lie within the contiguous general code space. */ |
| #define FIRST 257 /* first free entry */ |
| #define CLEAR 256 /* table clear output code */ |
| |
| #define INIT_BITS 9 /* initial number of bits/code */ |
| |
| |
| /* machine variants which require cc -Dmachine: pdp11, z8000, DOS */ |
| #define FAST |
| |
| #define HBITS 17 /* 50% occupancy */ |
| #define HSIZE (1<<HBITS) |
| #define HMASK (HSIZE-1) |
| #define HPRIME 9941 |
| #define BITS 16 |
| #undef MAXSEG_64K |
| #define MAXCODE(n) (1L << (n)) |
| |
| /* Block compress mode -C compatible with 2.0 */ |
| static int block_mode = BLOCK_MODE; |
| |
| /* user settable max # bits/code */ |
| static int maxbits = BITS; |
| |
| /* Input buffer */ |
| static unsigned char inbuf[IBUFSIZ + 64]; |
| |
| /* Output buffer */ |
| static unsigned char outbuf[OBUFSIZ + 2048]; |
| |
| |
| static unsigned char htab[HSIZE]; |
| static unsigned short codetab[HSIZE]; |
| |
| #define htabof(i) htab[i] |
| #define codetabof(i) codetab[i] |
| #define tab_prefixof(i) codetabof(i) |
| #define tab_suffixof(i) ((unsigned char *)(htab))[i] |
| #define de_stack ((unsigned char *)&(htab[HSIZE-1])) |
| #define clear_htab() memset(htab, -1, sizeof(htab)) |
| #define clear_tab_prefixof() memset(codetab, 0, 256); |
| |
| |
| /* |
| * Decompress stdin to stdout. This routine adapts to the codes in the |
| * file building the "string" table on-the-fly; requiring no table to |
| * be stored in the compressed file. The tables used herein are shared |
| * with those of the compress() routine. See the definitions above. |
| */ |
| |
| int uncompress(int fd_in, int fd_out) |
| { |
| unsigned char *stackp; |
| long int code; |
| int finchar; |
| long int oldcode; |
| long int incode; |
| int inbits; |
| int posbits; |
| int outpos; |
| int insize; |
| int bitmask; |
| long int free_ent; |
| long int maxcode; |
| long int maxmaxcode; |
| int n_bits; |
| int rsize = 0; |
| |
| insize = 0; |
| |
| inbuf[0] = xread_char(fd_in); |
| |
| maxbits = inbuf[0] & BIT_MASK; |
| block_mode = inbuf[0] & BLOCK_MODE; |
| maxmaxcode = MAXCODE(maxbits); |
| |
| if (maxbits > BITS) { |
| bb_error_msg("compressed with %d bits, can only handle %d bits", maxbits, |
| BITS); |
| return -1; |
| } |
| |
| maxcode = MAXCODE(n_bits = INIT_BITS) - 1; |
| bitmask = (1 << n_bits) - 1; |
| oldcode = -1; |
| finchar = 0; |
| outpos = 0; |
| posbits = 0 << 3; |
| |
| free_ent = ((block_mode) ? FIRST : 256); |
| |
| /* As above, initialize the first 256 entries in the table. */ |
| clear_tab_prefixof(); |
| |
| for (code = 255; code >= 0; --code) { |
| tab_suffixof(code) = (unsigned char) code; |
| } |
| |
| do { |
| resetbuf:; |
| { |
| int i; |
| int e; |
| int o; |
| |
| e = insize - (o = (posbits >> 3)); |
| |
| for (i = 0; i < e; ++i) |
| inbuf[i] = inbuf[i + o]; |
| |
| insize = e; |
| posbits = 0; |
| } |
| |
| if (insize < (int) sizeof(inbuf) - IBUFSIZ) { |
| rsize = safe_read(fd_in, inbuf + insize, IBUFSIZ); |
| insize += rsize; |
| } |
| |
| inbits = ((rsize > 0) ? (insize - insize % n_bits) << 3 : |
| (insize << 3) - (n_bits - 1)); |
| |
| while (inbits > posbits) { |
| if (free_ent > maxcode) { |
| posbits = |
| ((posbits - 1) + |
| ((n_bits << 3) - |
| (posbits - 1 + (n_bits << 3)) % (n_bits << 3))); |
| ++n_bits; |
| if (n_bits == maxbits) { |
| maxcode = maxmaxcode; |
| } else { |
| maxcode = MAXCODE(n_bits) - 1; |
| } |
| bitmask = (1 << n_bits) - 1; |
| goto resetbuf; |
| } |
| { |
| unsigned char *p = &inbuf[posbits >> 3]; |
| |
| code = |
| ((((long) (p[0])) | ((long) (p[1]) << 8) | |
| ((long) (p[2]) << 16)) >> (posbits & 0x7)) & bitmask; |
| } |
| posbits += n_bits; |
| |
| |
| if (oldcode == -1) { |
| outbuf[outpos++] = (unsigned char) (finchar = |
| (int) (oldcode = code)); |
| continue; |
| } |
| |
| if (code == CLEAR && block_mode) { |
| clear_tab_prefixof(); |
| free_ent = FIRST - 1; |
| posbits = |
| ((posbits - 1) + |
| ((n_bits << 3) - |
| (posbits - 1 + (n_bits << 3)) % (n_bits << 3))); |
| maxcode = MAXCODE(n_bits = INIT_BITS) - 1; |
| bitmask = (1 << n_bits) - 1; |
| goto resetbuf; |
| } |
| |
| incode = code; |
| stackp = de_stack; |
| |
| /* Special case for KwKwK string. */ |
| if (code >= free_ent) { |
| if (code > free_ent) { |
| unsigned char *p; |
| |
| posbits -= n_bits; |
| p = &inbuf[posbits >> 3]; |
| |
| bb_error_msg |
| ("insize:%d posbits:%d inbuf:%02X %02X %02X %02X %02X (%d)", |
| insize, posbits, p[-1], p[0], p[1], p[2], p[3], |
| (posbits & 07)); |
| bb_error_msg("uncompress: corrupt input"); |
| return -1; |
| } |
| |
| *--stackp = (unsigned char) finchar; |
| code = oldcode; |
| } |
| |
| /* Generate output characters in reverse order */ |
| while ((long int) code >= (long int) 256) { |
| *--stackp = tab_suffixof(code); |
| code = tab_prefixof(code); |
| } |
| |
| *--stackp = (unsigned char) (finchar = tab_suffixof(code)); |
| |
| /* And put them out in forward order */ |
| { |
| int i; |
| |
| if (outpos + (i = (de_stack - stackp)) >= OBUFSIZ) { |
| do { |
| if (i > OBUFSIZ - outpos) { |
| i = OBUFSIZ - outpos; |
| } |
| |
| if (i > 0) { |
| memcpy(outbuf + outpos, stackp, i); |
| outpos += i; |
| } |
| |
| if (outpos >= OBUFSIZ) { |
| write(fd_out, outbuf, outpos); |
| outpos = 0; |
| } |
| stackp += i; |
| } while ((i = (de_stack - stackp)) > 0); |
| } else { |
| memcpy(outbuf + outpos, stackp, i); |
| outpos += i; |
| } |
| } |
| |
| /* Generate the new entry. */ |
| if ((code = free_ent) < maxmaxcode) { |
| tab_prefixof(code) = (unsigned short) oldcode; |
| tab_suffixof(code) = (unsigned char) finchar; |
| free_ent = code + 1; |
| } |
| |
| /* Remember previous code. */ |
| oldcode = incode; |
| } |
| |
| } while (rsize > 0); |
| |
| if (outpos > 0) { |
| write(fd_out, outbuf, outpos); |
| } |
| |
| return 0; |
| } |