| /* vi: set sw=4 ts=4: */ | |
| /* | |
| * eraseall.c -- erase the whole of a MTD device | |
| * | |
| * Ported to busybox from mtd-utils. | |
| * | |
| * Copyright (C) 2000 Arcom Control System Ltd | |
| * | |
| * Renamed to flash_eraseall.c | |
| * | |
| * Licensed under GPLv2 or later, see file LICENSE in this source tree. | |
| */ | |
| //config:config FLASH_ERASEALL | |
| //config: bool "flash_eraseall (5.9 kb)" | |
| //config: default n # doesn't build on Ubuntu 8.04 | |
| //config: help | |
| //config: The flash_eraseall binary from mtd-utils as of git head c4c6a59eb. | |
| //config: This utility is used to erase the whole MTD device. | |
| //applet:IF_FLASH_ERASEALL(APPLET(flash_eraseall, BB_DIR_USR_SBIN, BB_SUID_DROP)) | |
| /* not NOEXEC: if flash operation stalls, use less memory in "hung" process */ | |
| //kbuild:lib-$(CONFIG_FLASH_ERASEALL) += flash_eraseall.o | |
| //usage:#define flash_eraseall_trivial_usage | |
| //usage: "[-jNq] MTD_DEVICE" | |
| //usage:#define flash_eraseall_full_usage "\n\n" | |
| //usage: "Erase an MTD device\n" | |
| //usage: "\n -j Format the device for jffs2" | |
| //usage: "\n -N Don't skip bad blocks" | |
| //usage: "\n -q Don't display progress messages" | |
| #include "libbb.h" | |
| #include <mtd/mtd-user.h> | |
| #include <linux/jffs2.h> | |
| #define OPTION_J (1 << 0) | |
| #define OPTION_N (1 << 1) | |
| #define OPTION_Q (1 << 2) | |
| #define IS_NAND (1 << 3) | |
| /* mtd/jffs2-user.h used to have this atrocity: | |
| extern int target_endian; | |
| #define t16(x) ({ __u16 __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_16(__b); }) | |
| #define t32(x) ({ __u32 __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_32(__b); }) | |
| #define cpu_to_je16(x) ((jint16_t){t16(x)}) | |
| #define cpu_to_je32(x) ((jint32_t){t32(x)}) | |
| #define cpu_to_jemode(x) ((jmode_t){t32(x)}) | |
| #define je16_to_cpu(x) (t16((x).v16)) | |
| #define je32_to_cpu(x) (t32((x).v32)) | |
| #define jemode_to_cpu(x) (t32((x).m)) | |
| but mtd/jffs2-user.h is gone now (at least 2.6.31.6 does not have it anymore) | |
| */ | |
| /* We always use native endianness */ | |
| #undef cpu_to_je16 | |
| #undef cpu_to_je32 | |
| #define cpu_to_je16(v) ((jint16_t){(v)}) | |
| #define cpu_to_je32(v) ((jint32_t){(v)}) | |
| static void show_progress(mtd_info_t *meminfo, erase_info_t *erase) | |
| { | |
| printf("\rErasing %u Kibyte @ %x - %2u%% complete.", | |
| (unsigned)meminfo->erasesize / 1024, | |
| erase->start, | |
| (unsigned) ((unsigned long long) erase->start * 100 / meminfo->size) | |
| ); | |
| fflush_all(); | |
| } | |
| int flash_eraseall_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; | |
| int flash_eraseall_main(int argc UNUSED_PARAM, char **argv) | |
| { | |
| struct jffs2_unknown_node cleanmarker; | |
| mtd_info_t meminfo; | |
| int fd, clmpos, clmlen; | |
| erase_info_t erase; | |
| struct stat st; | |
| unsigned int flags; | |
| char *mtd_name; | |
| flags = getopt32(argv, "^" "jNq" "\0" "=1"); | |
| mtd_name = argv[optind]; | |
| fd = xopen(mtd_name, O_RDWR); | |
| fstat(fd, &st); | |
| if (!S_ISCHR(st.st_mode)) | |
| bb_error_msg_and_die("%s: not a char device", mtd_name); | |
| xioctl(fd, MEMGETINFO, &meminfo); | |
| erase.length = meminfo.erasesize; | |
| if (meminfo.type == MTD_NANDFLASH) | |
| flags |= IS_NAND; | |
| clmpos = 0; | |
| clmlen = 8; | |
| if (flags & OPTION_J) { | |
| uint32_t *crc32_table; | |
| crc32_table = crc32_new_table_le(); | |
| cleanmarker.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK); | |
| cleanmarker.nodetype = cpu_to_je16(JFFS2_NODETYPE_CLEANMARKER); | |
| if (!(flags & IS_NAND)) | |
| cleanmarker.totlen = cpu_to_je32(sizeof(struct jffs2_unknown_node)); | |
| else { | |
| struct nand_oobinfo oobinfo; | |
| xioctl(fd, MEMGETOOBSEL, &oobinfo); | |
| /* Check for autoplacement */ | |
| if (oobinfo.useecc == MTD_NANDECC_AUTOPLACE) { | |
| /* Get the position of the free bytes */ | |
| clmpos = oobinfo.oobfree[0][0]; | |
| clmlen = oobinfo.oobfree[0][1]; | |
| if (clmlen > 8) | |
| clmlen = 8; | |
| if (clmlen == 0) | |
| bb_simple_error_msg_and_die("autoplacement selected and no empty space in oob"); | |
| } else { | |
| /* Legacy mode */ | |
| switch (meminfo.oobsize) { | |
| case 8: | |
| clmpos = 6; | |
| clmlen = 2; | |
| break; | |
| case 16: | |
| clmpos = 8; | |
| /*clmlen = 8;*/ | |
| break; | |
| case 64: | |
| clmpos = 16; | |
| /*clmlen = 8;*/ | |
| break; | |
| } | |
| } | |
| cleanmarker.totlen = cpu_to_je32(8); | |
| } | |
| cleanmarker.hdr_crc = cpu_to_je32( | |
| crc32_block_endian0(0, &cleanmarker, sizeof(struct jffs2_unknown_node) - 4, crc32_table) | |
| ); | |
| } | |
| /* Don't want to destroy progress indicator by bb_error_msg's */ | |
| applet_name = xasprintf("\n%s: %s", applet_name, mtd_name); | |
| for (erase.start = 0; erase.start < meminfo.size; | |
| erase.start += meminfo.erasesize) { | |
| if (!(flags & OPTION_N)) { | |
| int ret; | |
| loff_t offset = erase.start; | |
| ret = ioctl(fd, MEMGETBADBLOCK, &offset); | |
| if (ret > 0) { | |
| if (!(flags & OPTION_Q)) | |
| printf("\nSkipping bad block at 0x%08x\n", erase.start); | |
| continue; | |
| } | |
| if (ret < 0) { | |
| /* Black block table is not available on certain flash | |
| * types e.g. NOR | |
| */ | |
| if (errno == EOPNOTSUPP) { | |
| flags |= OPTION_N; | |
| if (flags & IS_NAND) | |
| bb_simple_error_msg_and_die("bad block check not available"); | |
| } else { | |
| bb_simple_perror_msg_and_die("MEMGETBADBLOCK error"); | |
| } | |
| } | |
| } | |
| if (!(flags & OPTION_Q)) | |
| show_progress(&meminfo, &erase); | |
| xioctl(fd, MEMERASE, &erase); | |
| /* format for JFFS2 ? */ | |
| if (!(flags & OPTION_J)) | |
| continue; | |
| /* write cleanmarker */ | |
| if (flags & IS_NAND) { | |
| struct mtd_oob_buf oob; | |
| oob.ptr = (unsigned char *) &cleanmarker; | |
| oob.start = erase.start + clmpos; | |
| oob.length = clmlen; | |
| xioctl(fd, MEMWRITEOOB, &oob); | |
| } else { | |
| xlseek(fd, erase.start, SEEK_SET); | |
| /* if (lseek(fd, erase.start, SEEK_SET) < 0) { | |
| bb_perror_msg("MTD %s failure", "seek"); | |
| continue; | |
| } */ | |
| xwrite(fd, &cleanmarker, sizeof(cleanmarker)); | |
| /* if (write(fd, &cleanmarker, sizeof(cleanmarker)) != sizeof(cleanmarker)) { | |
| bb_perror_msg("MTD %s failure", "write"); | |
| continue; | |
| } */ | |
| } | |
| if (!(flags & OPTION_Q)) | |
| printf(" Cleanmarker written at %x.", erase.start); | |
| } | |
| if (!(flags & OPTION_Q)) { | |
| show_progress(&meminfo, &erase); | |
| bb_putchar('\n'); | |
| } | |
| if (ENABLE_FEATURE_CLEAN_UP) | |
| close(fd); | |
| return EXIT_SUCCESS; | |
| } |