blob: 5fd9242ccdea330e0fb3258b332db18586b698c6 [file] [log] [blame]
/* vi: set sw=4 ts=4: */
/* nc: mini-netcat - built from the ground up for LRP
*
* Copyright (C) 1998, 1999 Charles P. Wright
* Copyright (C) 1998 Dave Cinege
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "busybox.h"
static void timeout(int signum)
{
bb_error_msg_and_die("timed out");
}
int nc_main(int argc, char **argv)
{
int sfd = 0;
int cfd = 0;
SKIP_NC_SERVER(const) unsigned do_listen = 0;
SKIP_NC_SERVER(const) unsigned lport = 0;
SKIP_NC_EXTRA (const) unsigned wsecs = 0;
SKIP_NC_EXTRA (const) unsigned delay = 0;
SKIP_NC_EXTRA (const int execparam = 0;)
USE_NC_EXTRA (char **execparam = NULL;)
struct sockaddr_in address;
fd_set readfds, testfds;
int opt; /* must be signed (getopt returns -1) */
memset(&address, 0, sizeof(address));
if (ENABLE_NC_SERVER || ENABLE_NC_EXTRA) {
/* getopt32 is _almost_ usable:
** it cannot handle "... -e prog -prog-opt" */
while ((opt = getopt(argc, argv,
"" USE_NC_SERVER("lp:") USE_NC_EXTRA("w:i:f:e:") )) > 0
) {
if (ENABLE_NC_SERVER && opt=='l') USE_NC_SERVER(do_listen++);
else if (ENABLE_NC_SERVER && opt=='p') USE_NC_SERVER(lport = bb_lookup_port(optarg, "tcp", 0));
else if (ENABLE_NC_EXTRA && opt=='w') USE_NC_EXTRA( wsecs = xatou(optarg));
else if (ENABLE_NC_EXTRA && opt=='i') USE_NC_EXTRA( delay = xatou(optarg));
else if (ENABLE_NC_EXTRA && opt=='f') USE_NC_EXTRA( cfd = xopen(optarg, O_RDWR));
else if (ENABLE_NC_EXTRA && opt=='e' && optind<=argc) {
/* We cannot just 'break'. We should let getopt finish.
** Or else we won't be able to find where
** 'host' and 'port' params are
** (think "nc -w 60 host port -e prog"). */
USE_NC_EXTRA(
char **p;
// +2: one for progname (optarg) and one for NULL
execparam = xzalloc(sizeof(char*) * (argc - optind + 2));
p = execparam;
*p++ = optarg;
while (optind < argc) {
*p++ = argv[optind++];
}
)
/* optind points to argv[arvc] (NULL) now.
** FIXME: we assume that getopt will not count options
** possibly present on "-e prog args" and will not
** include them into final value of optind
** which is to be used ... */
} else bb_show_usage();
}
argv += optind; /* ... here! */
argc -= optind;
// -l and -f don't mix
if (do_listen && cfd) bb_show_usage();
// Listen or file modes need zero arguments, client mode needs 2
opt = ((do_listen || cfd) ? 0 : 2);
if (argc != opt)
bb_show_usage();
} else {
if (argc != 3) bb_show_usage();
argc--;
argv++;
}
if (wsecs) {
signal(SIGALRM, timeout);
alarm(wsecs);
}
if (!cfd) {
sfd = xsocket(AF_INET, SOCK_STREAM, 0);
fcntl(sfd, F_SETFD, FD_CLOEXEC);
setsockopt_reuseaddr(sfd);
address.sin_family = AF_INET;
// Set local port.
if (lport != 0) {
address.sin_port = lport;
xbind(sfd, (struct sockaddr *) &address, sizeof(address));
}
if (do_listen) {
socklen_t addrlen = sizeof(address);
xlisten(sfd, do_listen);
// If we didn't specify a port number, query and print it to stderr.
if (!lport) {
socklen_t len = sizeof(address);
getsockname(sfd, &address, &len);
fdprintf(2, "%d\n", SWAP_BE16(address.sin_port));
}
repeatyness:
cfd = accept(sfd, (struct sockaddr *) &address, &addrlen);
if (cfd < 0)
bb_perror_msg_and_die("accept");
if (!execparam) close(sfd);
} else {
struct hostent *hostinfo;
hostinfo = xgethostbyname(argv[0]);
address.sin_addr = *(struct in_addr *) *hostinfo->h_addr_list;
address.sin_port = bb_lookup_port(argv[1], "tcp", 0);
if (connect(sfd, (struct sockaddr *) &address, sizeof(address)) < 0)
bb_perror_msg_and_die("connect");
cfd = sfd;
}
}
if (wsecs) {
alarm(0);
signal(SIGALRM, SIG_DFL);
}
/* -e given? */
if (execparam) {
if (cfd) {
signal(SIGCHLD, SIG_IGN);
dup2(cfd, 0);
close(cfd);
}
dup2(0, 1);
dup2(0, 2);
// With more than one -l, repeatedly act as server.
if (do_listen > 1 && vfork()) {
// This is a bit weird as cleanup goes, since we wind up with no
// stdin/stdout/stderr. But it's small and shouldn't hurt anything.
// We check for cfd == 0 above.
logmode = LOGMODE_NONE;
close(0);
close(1);
close(2);
goto repeatyness;
}
USE_NC_EXTRA(execvp(execparam[0], execparam);)
/* Don't print stuff or it will go over the wire.... */
_exit(127);
}
// Select loop copying stdin to cfd, and cfd to stdout.
FD_ZERO(&readfds);
FD_SET(cfd, &readfds);
FD_SET(STDIN_FILENO, &readfds);
for (;;) {
int fd;
int ofd;
int nread;
testfds = readfds;
if (select(FD_SETSIZE, &testfds, NULL, NULL, NULL) < 0)
bb_perror_msg_and_die("select");
for (fd = 0; fd < FD_SETSIZE; fd++) {
if (FD_ISSET(fd, &testfds)) {
nread = safe_read(fd, bb_common_bufsiz1,
sizeof(bb_common_bufsiz1));
if (fd == cfd) {
if (nread<1) exit(0);
ofd = STDOUT_FILENO;
} else {
if (nread<1) {
// Close outgoing half-connection so they get EOF, but
// leave incoming alone so we can see response.
shutdown(cfd, 1);
FD_CLR(STDIN_FILENO, &readfds);
}
ofd = cfd;
}
xwrite(ofd, bb_common_bufsiz1, nread);
if (delay > 0) sleep(delay);
}
}
}
}