| # Sample udhcpd configuration file (/etc/udhcpd.conf) |
| |
| # The start and end of the IP lease block |
| |
| start 192.168.0.20 #default: 192.168.0.20 |
| end 192.168.0.254 #default: 192.168.0.254 |
| |
| |
| # The interface that udhcpd will use |
| |
| interface eth0 #default: eth0 |
| |
| |
| # The maximim number of leases (includes addressesd reserved |
| # by OFFER's, DECLINE's, and ARP conficts |
| |
| #max_leases 254 #default: 254 |
| |
| |
| # If remaining is true (default), udhcpd will store the time |
| # remaining for each lease in the udhcpd leases file. This is |
| # for embedded systems that cannot keep time between reboots. |
| # If you set remaining to no, the absolute time that the lease |
| # expires at will be stored in the dhcpd.leases file. |
| |
| #remaining yes #default: yes |
| |
| |
| # The time period at which udhcpd will write out a dhcpd.leases |
| # file. If this is 0, udhcpd will never automatically write a |
| # lease file. (specified in seconds) |
| |
| #auto_time 7200 #default: 7200 (2 hours) |
| |
| |
| # The amount of time that an IP will be reserved (leased) for if a |
| # DHCP decline message is received (seconds). |
| |
| #decline_time 3600 #default: 3600 (1 hour) |
| |
| |
| # The amount of time that an IP will be reserved (leased) for if an |
| # ARP conflct occurs. (seconds |
| |
| #conflict_time 3600 #default: 3600 (1 hour) |
| |
| |
| # How long an offered address is reserved (leased) in seconds |
| |
| #offer_time 60 #default: 60 (1 minute) |
| |
| # If a lease to be given is below this value, the full lease time is |
| # instead used (seconds). |
| |
| #min_lease 60 #defult: 60 |
| |
| |
| # The location of the leases file |
| |
| #lease_file /var/lib/misc/udhcpd.leases #defualt: /var/lib/misc/udhcpd.leases |
| |
| # The location of the pid file |
| #pidfile /var/run/udhcpd.pid #default: /var/run/udhcpd.pid |
| |
| # Everytime udhcpd writes a leases file, the below script will be called. |
| # Useful for writing the lease file to flash every few hours. |
| |
| #notify_file #default: (no script) |
| |
| #notify_file dumpleases # <--- usefull for debugging |
| |
| # The following are bootp specific options, setable by udhcpd. |
| |
| #siaddr 192.168.0.22 #default: 0.0.0.0 |
| |
| #sname zorak #default: (none) |
| |
| #boot_file /var/nfs_root #default: (none) |
| |
| # The remainer of options are DHCP options and can be specifed with the |
| # keyword 'opt' or 'option'. If an option can take multiple items, such |
| # as the dns option, they can be listed on the same line, or multiple |
| # lines. The only option with a default is 'lease'. |
| |
| #Examles |
| opt dns 192.168.10.2 192.168.10.10 |
| option subnet 255.255.255.0 |
| opt router 192.168.10.2 |
| opt wins 192.168.10.10 |
| option dns 129.219.13.81 # appened to above DNS servers for a total of 3 |
| option domain local |
| option lease 864000 # 10 days of seconds |
| |
| |
| # Currently supported options, for more info, see options.c |
| #opt subnet |
| #opt timezone |
| #opt router |
| #opt timesvr |
| #opt namesvr |
| #opt dns |
| #opt logsvr |
| #opt cookiesvr |
| #opt lprsvr |
| #opt bootsize |
| #opt domain |
| #opt swapsvr |
| #opt rootpath |
| #opt ipttl |
| #opt mtu |
| #opt broadcast |
| #opt wins |
| #opt lease |
| #opt ntpsrv |
| #opt tftp |
| #opt bootfile |
