| /* vi: set sw=4 ts=4: */ | |
| /* | |
| * Mini fbset implementation for busybox | |
| * | |
| * Copyright (C) 1999 by Randolph Chung <tausq@debian.org> | |
| * | |
| * Licensed under GPLv2 or later, see file LICENSE in this source tree. | |
| * | |
| * This is a from-scratch implementation of fbset; but the de facto fbset | |
| * implementation was a good reference. fbset (original) is released under | |
| * the GPL, and is (c) 1995-1999 by: | |
| * Geert Uytterhoeven (Geert.Uytterhoeven@cs.kuleuven.ac.be) | |
| */ | |
| //config:config FBSET | |
| //config: bool "fbset (5.9 kb)" | |
| //config: default y | |
| //config: select PLATFORM_LINUX | |
| //config: help | |
| //config: fbset is used to show or change the settings of a Linux frame buffer | |
| //config: device. The frame buffer device provides a simple and unique | |
| //config: interface to access a graphics display. Enable this option | |
| //config: if you wish to enable the 'fbset' utility. | |
| //config: | |
| //config:config FEATURE_FBSET_FANCY | |
| //config: bool "Enable extra options" | |
| //config: default y | |
| //config: depends on FBSET | |
| //config: help | |
| //config: This option enables extended fbset options, allowing one to set the | |
| //config: framebuffer size, color depth, etc. interface to access a graphics | |
| //config: display. Enable this option if you wish to enable extended fbset | |
| //config: options. | |
| //config: | |
| //config:config FEATURE_FBSET_READMODE | |
| //config: bool "Enable readmode support" | |
| //config: default y | |
| //config: depends on FBSET | |
| //config: help | |
| //config: This option allows fbset to read the video mode database stored by | |
| //config: default as /etc/fb.modes, which can be used to set frame buffer | |
| //config: device to pre-defined video modes. | |
| //applet:IF_FBSET(APPLET(fbset, BB_DIR_USR_SBIN, BB_SUID_DROP)) | |
| //kbuild:lib-$(CONFIG_FBSET) += fbset.o | |
| //usage:#define fbset_trivial_usage | |
| //usage: "[OPTIONS] [MODE]" | |
| //usage:#define fbset_full_usage "\n\n" | |
| //usage: "Show and modify frame buffer settings" | |
| //usage: | |
| //usage:#define fbset_example_usage | |
| //usage: "$ fbset\n" | |
| //usage: "mode \"1024x768-76\"\n" | |
| //usage: " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" | |
| //usage: " geometry 1024 768 1024 768 16\n" | |
| //usage: " timings 12714 128 32 16 4 128 4\n" | |
| //usage: " accel false\n" | |
| //usage: " rgba 5/11,6/5,5/0,0/0\n" | |
| //usage: "endmode\n" | |
| #include "libbb.h" | |
| #define DEFAULTFBDEV FB_0 | |
| #define DEFAULTFBMODE "/etc/fb.modes" | |
| /* Stuff stolen from the kernel's fb.h */ | |
| #define FB_ACTIVATE_ALL 64 | |
| enum { | |
| FBIOGET_VSCREENINFO = 0x4600, | |
| FBIOPUT_VSCREENINFO = 0x4601 | |
| }; | |
| struct fb_bitfield { | |
| uint32_t offset; /* beginning of bitfield */ | |
| uint32_t length; /* length of bitfield */ | |
| uint32_t msb_right; /* !=0: Most significant bit is right */ | |
| }; | |
| struct fb_var_screeninfo { | |
| uint32_t xres; /* visible resolution */ | |
| uint32_t yres; | |
| uint32_t xres_virtual; /* virtual resolution */ | |
| uint32_t yres_virtual; | |
| uint32_t xoffset; /* offset from virtual to visible */ | |
| uint32_t yoffset; /* resolution */ | |
| uint32_t bits_per_pixel; | |
| uint32_t grayscale; /* !=0 Graylevels instead of colors */ | |
| struct fb_bitfield red; /* bitfield in fb mem if true color, */ | |
| struct fb_bitfield green; /* else only length is significant */ | |
| struct fb_bitfield blue; | |
| struct fb_bitfield transp; /* transparency */ | |
| uint32_t nonstd; /* !=0 Non standard pixel format */ | |
| uint32_t activate; /* see FB_ACTIVATE_x */ | |
| uint32_t height; /* height of picture in mm */ | |
| uint32_t width; /* width of picture in mm */ | |
| uint32_t accel_flags; /* acceleration flags (hints) */ | |
| /* Timing: All values in pixclocks, except pixclock (of course) */ | |
| uint32_t pixclock; /* pixel clock in ps (pico seconds) */ | |
| uint32_t left_margin; /* time from sync to picture */ | |
| uint32_t right_margin; /* time from picture to sync */ | |
| uint32_t upper_margin; /* time from sync to picture */ | |
| uint32_t lower_margin; | |
| uint32_t hsync_len; /* length of horizontal sync */ | |
| uint32_t vsync_len; /* length of vertical sync */ | |
| uint32_t sync; /* see FB_SYNC_x */ | |
| uint32_t vmode; /* see FB_VMODE_x */ | |
| uint32_t reserved[6]; /* Reserved for future compatibility */ | |
| }; | |
| static void copy_if_gt0(uint32_t *src, uint32_t *dst, unsigned cnt) | |
| { | |
| do { | |
| if ((int32_t) *src > 0) | |
| *dst = *src; | |
| src++; | |
| dst++; | |
| } while (--cnt); | |
| } | |
| static NOINLINE void copy_changed_values( | |
| struct fb_var_screeninfo *base, | |
| struct fb_var_screeninfo *set) | |
| { | |
| //if ((int32_t) set->xres > 0) base->xres = set->xres; | |
| //if ((int32_t) set->yres > 0) base->yres = set->yres; | |
| //if ((int32_t) set->xres_virtual > 0) base->xres_virtual = set->xres_virtual; | |
| //if ((int32_t) set->yres_virtual > 0) base->yres_virtual = set->yres_virtual; | |
| copy_if_gt0(&set->xres, &base->xres, 4); | |
| if ((int32_t) set->bits_per_pixel > 0) base->bits_per_pixel = set->bits_per_pixel; | |
| //copy_if_gt0(&set->bits_per_pixel, &base->bits_per_pixel, 1); | |
| //if ((int32_t) set->pixclock > 0) base->pixclock = set->pixclock; | |
| //if ((int32_t) set->left_margin > 0) base->left_margin = set->left_margin; | |
| //if ((int32_t) set->right_margin > 0) base->right_margin = set->right_margin; | |
| //if ((int32_t) set->upper_margin > 0) base->upper_margin = set->upper_margin; | |
| //if ((int32_t) set->lower_margin > 0) base->lower_margin = set->lower_margin; | |
| //if ((int32_t) set->hsync_len > 0) base->hsync_len = set->hsync_len; | |
| //if ((int32_t) set->vsync_len > 0) base->vsync_len = set->vsync_len; | |
| //if ((int32_t) set->sync > 0) base->sync = set->sync; | |
| //if ((int32_t) set->vmode > 0) base->vmode = set->vmode; | |
| copy_if_gt0(&set->pixclock, &base->pixclock, 9); | |
| } | |
| enum { | |
| CMD_FB = 1, | |
| CMD_DB = 2, | |
| CMD_GEOMETRY = 3, | |
| CMD_TIMING = 4, | |
| CMD_ACCEL = 5, | |
| CMD_HSYNC = 6, | |
| CMD_VSYNC = 7, | |
| CMD_LACED = 8, | |
| CMD_DOUBLE = 9, | |
| /* CMD_XCOMPAT = 10, */ | |
| CMD_ALL = 11, | |
| CMD_INFO = 12, | |
| CMD_SHOW = 13, | |
| CMD_CHANGE = 14, | |
| #if ENABLE_FEATURE_FBSET_FANCY | |
| CMD_XRES = 100, | |
| CMD_YRES = 101, | |
| CMD_VXRES = 102, | |
| CMD_VYRES = 103, | |
| CMD_DEPTH = 104, | |
| CMD_MATCH = 105, | |
| CMD_PIXCLOCK = 106, | |
| CMD_LEFT = 107, | |
| CMD_RIGHT = 108, | |
| CMD_UPPER = 109, | |
| CMD_LOWER = 110, | |
| CMD_HSLEN = 111, | |
| CMD_VSLEN = 112, | |
| CMD_CSYNC = 113, | |
| CMD_GSYNC = 114, | |
| CMD_EXTSYNC = 115, | |
| CMD_BCAST = 116, | |
| CMD_RGBA = 117, | |
| CMD_STEP = 118, | |
| CMD_MOVE = 119, | |
| #endif | |
| }; | |
| static const struct cmdoptions_t { | |
| const char name[9]; | |
| const unsigned char param_count; | |
| const unsigned char code; | |
| } g_cmdoptions[] = { | |
| /*"12345678" + NUL */ | |
| //TODO: convert to index_in_strings() | |
| { "fb" , 1, CMD_FB }, | |
| { "db" , 1, CMD_DB }, | |
| { "a" , 0, CMD_ALL }, | |
| { "i" , 0, CMD_INFO }, | |
| { "g" , 5, CMD_GEOMETRY }, | |
| { "t" , 7, CMD_TIMING }, | |
| { "accel" , 1, CMD_ACCEL }, | |
| { "hsync" , 1, CMD_HSYNC }, | |
| { "vsync" , 1, CMD_VSYNC }, | |
| { "laced" , 1, CMD_LACED }, | |
| { "double" , 1, CMD_DOUBLE }, | |
| { "show" , 0, CMD_SHOW }, | |
| { "s" , 0, CMD_SHOW }, | |
| #if ENABLE_FEATURE_FBSET_FANCY | |
| { "all" , 0, CMD_ALL }, | |
| { "xres" , 1, CMD_XRES }, | |
| { "yres" , 1, CMD_YRES }, | |
| { "vxres" , 1, CMD_VXRES }, | |
| { "vyres" , 1, CMD_VYRES }, | |
| { "depth" , 1, CMD_DEPTH }, | |
| { "match" , 0, CMD_MATCH }, | |
| { "geometry", 5, CMD_GEOMETRY }, | |
| { "pixclock", 1, CMD_PIXCLOCK }, | |
| { "left" , 1, CMD_LEFT }, | |
| { "right" , 1, CMD_RIGHT }, | |
| { "upper" , 1, CMD_UPPER }, | |
| { "lower" , 1, CMD_LOWER }, | |
| { "hslen" , 1, CMD_HSLEN }, | |
| { "vslen" , 1, CMD_VSLEN }, | |
| { "timings" , 7, CMD_TIMING }, | |
| { "csync" , 1, CMD_CSYNC }, | |
| { "gsync" , 1, CMD_GSYNC }, | |
| { "extsync" , 1, CMD_EXTSYNC }, | |
| { "bcast" , 1, CMD_BCAST }, | |
| { "rgba" , 1, CMD_RGBA }, | |
| { "step" , 1, CMD_STEP }, | |
| { "move" , 1, CMD_MOVE }, | |
| #endif | |
| }; | |
| /* taken from linux/fb.h */ | |
| enum { | |
| FB_SYNC_HOR_HIGH_ACT = 1, /* horizontal sync high active */ | |
| FB_SYNC_VERT_HIGH_ACT = 2, /* vertical sync high active */ | |
| #if ENABLE_FEATURE_FBSET_READMODE | |
| FB_VMODE_INTERLACED = 1, /* interlaced */ | |
| FB_VMODE_DOUBLE = 2, /* double scan */ | |
| FB_SYNC_EXT = 4, /* external sync */ | |
| FB_SYNC_COMP_HIGH_ACT = 8, /* composite sync high active */ | |
| #endif | |
| }; | |
| #if ENABLE_FEATURE_FBSET_READMODE | |
| static void ss(uint32_t *x, uint32_t flag, char *buf, const char *what) | |
| { | |
| if (strcmp(buf, what) == 0) | |
| *x &= ~flag; | |
| else | |
| *x |= flag; | |
| } | |
| /* Mode db file contains mode definitions like this: | |
| * mode "800x600-48-lace" | |
| * # D: 36.00 MHz, H: 33.835 kHz, V: 96.39 Hz | |
| * geometry 800 600 800 600 8 | |
| * timings 27778 56 80 79 11 128 12 | |
| * laced true | |
| * hsync high | |
| * vsync high | |
| * endmode | |
| */ | |
| static int read_mode_db(struct fb_var_screeninfo *base, const char *fn, | |
| const char *mode) | |
| { | |
| char *token[2], *p, *s; | |
| parser_t *parser = config_open(fn); | |
| while (config_read(parser, token, 2, 1, "# \t\r", PARSE_NORMAL)) { | |
| if (strcmp(token[0], "mode") != 0 || !token[1]) | |
| continue; | |
| p = strstr(token[1], mode); | |
| if (!p) | |
| continue; | |
| s = p + strlen(mode); | |
| //bb_error_msg("CHECK[%s][%s][%d]", mode, p-1, *s); | |
| /* exact match? */ | |
| if (((!*s || isspace(*s)) && '"' != s[-1]) /* end-of-token */ | |
| || ('"' == *s && '"' == p[-1]) /* ends with " but starts with " too! */ | |
| ) { | |
| //bb_error_msg("FOUND[%s][%s][%s][%d]", token[1], p, mode, isspace(*s)); | |
| break; | |
| } | |
| } | |
| if (!token[0]) | |
| return 0; | |
| while (config_read(parser, token, 2, 1, "# \t", PARSE_NORMAL)) { | |
| int i; | |
| //bb_error_msg("???[%s][%s]", token[0], token[1]); | |
| if (strcmp(token[0], "endmode") == 0) { | |
| //bb_error_msg("OK[%s]", mode); | |
| return 1; | |
| } | |
| p = token[1]; | |
| i = index_in_strings( | |
| "geometry\0timings\0interlaced\0double\0vsync\0hsync\0csync\0extsync\0rgba\0", | |
| token[0]); | |
| switch (i) { | |
| case 0: | |
| if (sizeof(int) == sizeof(base->xres)) { | |
| sscanf(p, "%d %d %d %d %d", | |
| &base->xres, &base->yres, | |
| &base->xres_virtual, &base->yres_virtual, | |
| &base->bits_per_pixel); | |
| } else { | |
| int base_xres, base_yres; | |
| int base_xres_virtual, base_yres_virtual; | |
| int base_bits_per_pixel; | |
| sscanf(p, "%d %d %d %d %d", | |
| &base_xres, &base_yres, | |
| &base_xres_virtual, &base_yres_virtual, | |
| &base_bits_per_pixel); | |
| base->xres = base_xres; | |
| base->yres = base_yres; | |
| base->xres_virtual = base_xres_virtual; | |
| base->yres_virtual = base_yres_virtual; | |
| base->bits_per_pixel = base_bits_per_pixel; | |
| } | |
| //bb_error_msg("GEO[%s]", p); | |
| break; | |
| case 1: | |
| if (sizeof(int) == sizeof(base->xres)) { | |
| sscanf(p, "%d %d %d %d %d %d %d", | |
| &base->pixclock, | |
| &base->left_margin, &base->right_margin, | |
| &base->upper_margin, &base->lower_margin, | |
| &base->hsync_len, &base->vsync_len); | |
| } else { | |
| int base_pixclock; | |
| int base_left_margin, base_right_margin; | |
| int base_upper_margin, base_lower_margin; | |
| int base_hsync_len, base_vsync_len; | |
| sscanf(p, "%d %d %d %d %d %d %d", | |
| &base_pixclock, | |
| &base_left_margin, &base_right_margin, | |
| &base_upper_margin, &base_lower_margin, | |
| &base_hsync_len, &base_vsync_len); | |
| base->pixclock = base_pixclock; | |
| base->left_margin = base_left_margin; | |
| base->right_margin = base_right_margin; | |
| base->upper_margin = base_upper_margin; | |
| base->lower_margin = base_lower_margin; | |
| base->hsync_len = base_hsync_len; | |
| base->vsync_len = base_vsync_len; | |
| } | |
| //bb_error_msg("TIM[%s]", p); | |
| break; | |
| case 2: | |
| case 3: { | |
| static const uint32_t syncs[] = {FB_VMODE_INTERLACED, FB_VMODE_DOUBLE}; | |
| ss(&base->vmode, syncs[i-2], p, "false"); | |
| //bb_error_msg("VMODE[%s]", p); | |
| break; | |
| } | |
| case 4: | |
| case 5: | |
| case 6: { | |
| static const uint32_t syncs[] = {FB_SYNC_VERT_HIGH_ACT, FB_SYNC_HOR_HIGH_ACT, FB_SYNC_COMP_HIGH_ACT}; | |
| ss(&base->sync, syncs[i-4], p, "low"); | |
| //bb_error_msg("SYNC[%s]", p); | |
| break; | |
| } | |
| case 7: | |
| ss(&base->sync, FB_SYNC_EXT, p, "false"); | |
| //bb_error_msg("EXTSYNC[%s]", p); | |
| break; | |
| case 8: { | |
| int red_offset, red_length; | |
| int green_offset, green_length; | |
| int blue_offset, blue_length; | |
| int transp_offset, transp_length; | |
| sscanf(p, "%d/%d,%d/%d,%d/%d,%d/%d", | |
| &red_length, &red_offset, | |
| &green_length, &green_offset, | |
| &blue_length, &blue_offset, | |
| &transp_length, &transp_offset); | |
| base->red.offset = red_offset; | |
| base->red.length = red_length; | |
| base->red.msb_right = 0; | |
| base->green.offset = green_offset; | |
| base->green.length = green_length; | |
| base->green.msb_right = 0; | |
| base->blue.offset = blue_offset; | |
| base->blue.length = blue_length; | |
| base->blue.msb_right = 0; | |
| base->transp.offset = transp_offset; | |
| base->transp.length = transp_length; | |
| base->transp.msb_right = 0; | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| #endif | |
| static NOINLINE void showmode(struct fb_var_screeninfo *v) | |
| { | |
| double drate = 0, hrate = 0, vrate = 0; | |
| if (v->pixclock) { | |
| drate = 1e12 / v->pixclock; | |
| hrate = drate / (v->left_margin + v->xres + v->right_margin + v->hsync_len); | |
| vrate = hrate / (v->upper_margin + v->yres + v->lower_margin + v->vsync_len); | |
| } | |
| printf("\nmode \"%ux%u-%u\"\n" | |
| #if ENABLE_FEATURE_FBSET_FANCY | |
| "\t# D: %.3f MHz, H: %.3f kHz, V: %.3f Hz\n" | |
| #endif | |
| "\tgeometry %u %u %u %u %u\n" | |
| "\ttimings %u %u %u %u %u %u %u\n" | |
| "\taccel %s\n" | |
| "\trgba %u/%u,%u/%u,%u/%u,%u/%u\n" | |
| "endmode\n\n", | |
| v->xres, v->yres, (int) (vrate + 0.5), | |
| #if ENABLE_FEATURE_FBSET_FANCY | |
| drate / 1e6, hrate / 1e3, vrate, | |
| #endif | |
| v->xres, v->yres, v->xres_virtual, v->yres_virtual, v->bits_per_pixel, | |
| v->pixclock, v->left_margin, v->right_margin, v->upper_margin, v->lower_margin, | |
| v->hsync_len, v->vsync_len, | |
| (v->accel_flags > 0 ? "true" : "false"), | |
| v->red.length, v->red.offset, v->green.length, v->green.offset, | |
| v->blue.length, v->blue.offset, v->transp.length, v->transp.offset); | |
| } | |
| int fbset_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; | |
| int fbset_main(int argc, char **argv) | |
| { | |
| enum { | |
| OPT_CHANGE = (1 << 0), | |
| OPT_SHOW = (1 << 1), | |
| OPT_READMODE = (1 << 2), | |
| OPT_ALL = (1 << 3), | |
| }; | |
| struct fb_var_screeninfo var_old, var_set; | |
| int fh, i; | |
| unsigned options = 0; | |
| const char *fbdev = DEFAULTFBDEV; | |
| IF_FEATURE_FBSET_READMODE(const char *modefile = DEFAULTFBMODE;) | |
| char *thisarg; | |
| char *mode = mode; /* for compiler */ | |
| memset(&var_set, 0xff, sizeof(var_set)); /* set all to -1 */ | |
| /* parse cmd args.... why do they have to make things so difficult? */ | |
| argv++; | |
| argc--; | |
| for (; argc > 0 && (thisarg = *argv) != NULL; argc--, argv++) { | |
| if (thisarg[0] != '-') { | |
| if (!ENABLE_FEATURE_FBSET_READMODE || argc != 1) | |
| bb_show_usage(); | |
| mode = thisarg; | |
| options |= OPT_READMODE; | |
| goto contin; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(g_cmdoptions); i++) { | |
| if (strcmp(thisarg + 1, g_cmdoptions[i].name) != 0) | |
| continue; | |
| if (argc <= g_cmdoptions[i].param_count) | |
| bb_show_usage(); | |
| switch (g_cmdoptions[i].code) { | |
| case CMD_FB: | |
| fbdev = argv[1]; | |
| break; | |
| case CMD_DB: | |
| IF_FEATURE_FBSET_READMODE(modefile = argv[1];) | |
| break; | |
| case CMD_ALL: | |
| options |= OPT_ALL; | |
| break; | |
| case CMD_SHOW: | |
| options |= OPT_SHOW; | |
| break; | |
| case CMD_GEOMETRY: | |
| var_set.xres = xatou32(argv[1]); | |
| var_set.yres = xatou32(argv[2]); | |
| var_set.xres_virtual = xatou32(argv[3]); | |
| var_set.yres_virtual = xatou32(argv[4]); | |
| var_set.bits_per_pixel = xatou32(argv[5]); | |
| break; | |
| case CMD_TIMING: | |
| var_set.pixclock = xatou32(argv[1]); | |
| var_set.left_margin = xatou32(argv[2]); | |
| var_set.right_margin = xatou32(argv[3]); | |
| var_set.upper_margin = xatou32(argv[4]); | |
| var_set.lower_margin = xatou32(argv[5]); | |
| var_set.hsync_len = xatou32(argv[6]); | |
| var_set.vsync_len = xatou32(argv[7]); | |
| break; | |
| case CMD_ACCEL: | |
| break; | |
| case CMD_HSYNC: | |
| var_set.sync |= FB_SYNC_HOR_HIGH_ACT; | |
| break; | |
| case CMD_VSYNC: | |
| var_set.sync |= FB_SYNC_VERT_HIGH_ACT; | |
| break; | |
| #if ENABLE_FEATURE_FBSET_FANCY | |
| case CMD_XRES: | |
| var_set.xres = xatou32(argv[1]); | |
| break; | |
| case CMD_YRES: | |
| var_set.yres = xatou32(argv[1]); | |
| break; | |
| case CMD_DEPTH: | |
| var_set.bits_per_pixel = xatou32(argv[1]); | |
| break; | |
| #endif | |
| } | |
| switch (g_cmdoptions[i].code) { | |
| case CMD_FB: | |
| case CMD_DB: | |
| case CMD_ALL: | |
| case CMD_SHOW: | |
| break; | |
| default: | |
| /* other commands imply changes */ | |
| options |= OPT_CHANGE; | |
| } | |
| argc -= g_cmdoptions[i].param_count; | |
| argv += g_cmdoptions[i].param_count; | |
| goto contin; | |
| } | |
| bb_show_usage(); | |
| contin: ; | |
| } | |
| fh = xopen(fbdev, O_RDONLY); | |
| xioctl(fh, FBIOGET_VSCREENINFO, &var_old); | |
| if (options & OPT_READMODE) { | |
| #if ENABLE_FEATURE_FBSET_READMODE | |
| if (!read_mode_db(&var_old, modefile, mode)) { | |
| bb_error_msg_and_die("unknown video mode '%s'", mode); | |
| } | |
| options |= OPT_CHANGE; | |
| #endif | |
| } | |
| if (options & OPT_CHANGE) { | |
| copy_changed_values(&var_old, &var_set); | |
| if (options & OPT_ALL) | |
| var_old.activate = FB_ACTIVATE_ALL; | |
| xioctl(fh, FBIOPUT_VSCREENINFO, &var_old); | |
| } | |
| if (options == 0 || (options & OPT_SHOW)) | |
| showmode(&var_old); | |
| if (ENABLE_FEATURE_CLEAN_UP) | |
| close(fh); | |
| return EXIT_SUCCESS; | |
| } |