| /* vi: set sw=4 ts=4: */ | |
| /* | |
| * | |
| * dmesg - display/control kernel ring buffer. | |
| * | |
| * Copyright 2006 Rob Landley <rob@landley.net> | |
| * Copyright 2006 Bernhard Reutner-Fischer <rep.nop@aon.at> | |
| * | |
| * Licensed under GPLv2, see file LICENSE in this source tree. | |
| */ | |
| //config:config DMESG | |
| //config: bool "dmesg (3.7 kb)" | |
| //config: default y | |
| //config: select PLATFORM_LINUX | |
| //config: help | |
| //config: dmesg is used to examine or control the kernel ring buffer. When the | |
| //config: Linux kernel prints messages to the system log, they are stored in | |
| //config: the kernel ring buffer. You can use dmesg to print the kernel's ring | |
| //config: buffer, clear the kernel ring buffer, change the size of the kernel | |
| //config: ring buffer, and change the priority level at which kernel messages | |
| //config: are also logged to the system console. Enable this option if you | |
| //config: wish to enable the 'dmesg' utility. | |
| //config: | |
| //config:config FEATURE_DMESG_PRETTY | |
| //config: bool "Pretty output" | |
| //config: default y | |
| //config: depends on DMESG | |
| //config: help | |
| //config: If you wish to scrub the syslog level from the output, say 'Y' here. | |
| //config: The syslog level is a string prefixed to every line with the form | |
| //config: "<#>". | |
| //config: | |
| //config: With this option you will see: | |
| //config: # dmesg | |
| //config: Linux version 2.6.17.4 ..... | |
| //config: BIOS-provided physical RAM map: | |
| //config: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) | |
| //config: | |
| //config: Without this option you will see: | |
| //config: # dmesg | |
| //config: <5>Linux version 2.6.17.4 ..... | |
| //config: <6>BIOS-provided physical RAM map: | |
| //config: <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable) | |
| //applet:IF_DMESG(APPLET(dmesg, BB_DIR_BIN, BB_SUID_DROP)) | |
| //kbuild:lib-$(CONFIG_DMESG) += dmesg.o | |
| //usage:#define dmesg_trivial_usage | |
| //usage: "[-c] [-n LEVEL] [-s SIZE]" | |
| //usage:#define dmesg_full_usage "\n\n" | |
| //usage: "Print or control the kernel ring buffer\n" | |
| //usage: "\n -c Clear ring buffer after printing" | |
| //usage: "\n -n LEVEL Set console logging level" | |
| //usage: "\n -s SIZE Buffer size" | |
| //usage: "\n -r Print raw message buffer" | |
| #include <sys/klog.h> | |
| #include "libbb.h" | |
| int dmesg_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; | |
| int dmesg_main(int argc UNUSED_PARAM, char **argv) | |
| { | |
| int len, level; | |
| char *buf; | |
| unsigned opts; | |
| enum { | |
| OPT_c = 1 << 0, | |
| OPT_s = 1 << 1, | |
| OPT_n = 1 << 2, | |
| OPT_r = 1 << 3 | |
| }; | |
| opts = getopt32(argv, "cs:+n:+r", &len, &level); | |
| if (opts & OPT_n) { | |
| if (klogctl(8, NULL, (long) level)) | |
| bb_simple_perror_msg_and_die("klogctl"); | |
| return EXIT_SUCCESS; | |
| } | |
| if (!(opts & OPT_s)) | |
| len = klogctl(10, NULL, 0); /* read ring buffer size */ | |
| if (len < 16*1024) | |
| len = 16*1024; | |
| if (len > 16*1024*1024) | |
| len = 16*1024*1024; | |
| buf = xmalloc(len); | |
| len = klogctl(3 + (opts & OPT_c), buf, len); /* read ring buffer */ | |
| if (len < 0) | |
| bb_simple_perror_msg_and_die("klogctl"); | |
| if (len == 0) | |
| return EXIT_SUCCESS; | |
| if (ENABLE_FEATURE_DMESG_PRETTY && !(opts & OPT_r)) { | |
| int last = '\n'; | |
| int in = 0; | |
| /* Skip <[0-9]+> at the start of lines */ | |
| while (1) { | |
| if (last == '\n' && buf[in] == '<') { | |
| while (buf[in++] != '>' && in < len) | |
| ; | |
| } else { | |
| last = buf[in++]; | |
| putchar(last); | |
| } | |
| if (in >= len) | |
| break; | |
| } | |
| /* Make sure we end with a newline */ | |
| if (last != '\n') | |
| bb_putchar('\n'); | |
| } else { | |
| full_write(STDOUT_FILENO, buf, len); | |
| if (buf[len-1] != '\n') | |
| bb_putchar('\n'); | |
| } | |
| if (ENABLE_FEATURE_CLEAN_UP) free(buf); | |
| return EXIT_SUCCESS; | |
| } |