| /* vi: set sw=4 ts=4: */ | |
| /* | |
| * Modprobe written from scratch for BusyBox | |
| * | |
| * Copyright (c) 2008 Timo Teras <timo.teras@iki.fi> | |
| * Copyright (c) 2008 Vladimir Dronnikov | |
| * | |
| * Licensed under GPLv2 or later, see file LICENSE in this source tree. | |
| */ | |
| //config:config MODPROBE | |
| //config: bool "modprobe (28 kb)" | |
| //config: default y | |
| //config: select PLATFORM_LINUX | |
| //config: help | |
| //config: Handle the loading of modules, and their dependencies on a high | |
| //config: level. | |
| //config: | |
| //config:config FEATURE_MODPROBE_BLACKLIST | |
| //config: bool "Blacklist support" | |
| //config: default y | |
| //config: depends on MODPROBE && !MODPROBE_SMALL | |
| //config: help | |
| //config: Say 'y' here to enable support for the 'blacklist' command in | |
| //config: modprobe.conf. This prevents the alias resolver to resolve | |
| //config: blacklisted modules. This is useful if you want to prevent your | |
| //config: hardware autodetection scripts to load modules like evdev, frame | |
| //config: buffer drivers etc. | |
| //applet:IF_MODPROBE(IF_NOT_MODPROBE_SMALL(APPLET_NOEXEC(modprobe, modprobe, BB_DIR_SBIN, BB_SUID_DROP, modprobe))) | |
| //kbuild:ifneq ($(CONFIG_MODPROBE_SMALL),y) | |
| //kbuild:lib-$(CONFIG_MODPROBE) += modprobe.o modutils.o | |
| //kbuild:endif | |
| #include "libbb.h" | |
| #include "modutils.h" | |
| #include <sys/utsname.h> | |
| #include <fnmatch.h> | |
| #if 1 | |
| #define DBG(...) ((void)0) | |
| #else | |
| #define DBG(fmt, ...) bb_error_msg("%s: " fmt, __func__, ## __VA_ARGS__) | |
| #endif | |
| /* Note that unlike older versions of modules.dep/depmod (busybox and m-i-t), | |
| * we expect the full dependency list to be specified in modules.dep. | |
| * Older versions would only export the direct dependency list. | |
| */ | |
| //usage:#if !ENABLE_MODPROBE_SMALL | |
| //usage:#define modprobe_notes_usage | |
| //usage: "modprobe can (un)load a stack of modules, passing each module options (when\n" | |
| //usage: "loading). modprobe uses a configuration file to determine what option(s) to\n" | |
| //usage: "pass each module it loads.\n" | |
| //usage: "\n" | |
| //usage: "The configuration file is searched (in this order):\n" | |
| //usage: "\n" | |
| //usage: " /etc/modprobe.conf (2.6 only)\n" | |
| //usage: " /etc/modules.conf\n" | |
| //usage: " /etc/conf.modules (deprecated)\n" | |
| //usage: "\n" | |
| //usage: "They all have the same syntax (see below). If none is present, it is\n" | |
| //usage: "_not_ an error; each loaded module is then expected to load without\n" | |
| //usage: "options. Once a file is found, the others are tested for.\n" | |
| //usage: "\n" | |
| //usage: "/etc/modules.conf entry format:\n" | |
| //usage: "\n" | |
| //usage: " alias <alias_name> <mod_name>\n" | |
| //usage: " Makes it possible to modprobe alias_name, when there is no such module.\n" | |
| //usage: " It makes sense if your mod_name is long, or you want a more representative\n" | |
| //usage: " name for that module (eg. 'scsi' in place of 'aha7xxx').\n" | |
| //usage: " This makes it also possible to use a different set of options (below) for\n" | |
| //usage: " the module and the alias.\n" | |
| //usage: " A module can be aliased more than once.\n" | |
| //usage: "\n" | |
| //usage: " options <mod_name|alias_name> <symbol=value...>\n" | |
| //usage: " When loading module mod_name (or the module aliased by alias_name), pass\n" | |
| //usage: " the \"symbol=value\" pairs as option to that module.\n" | |
| //usage: "\n" | |
| //usage: "Sample /etc/modules.conf file:\n" | |
| //usage: "\n" | |
| //usage: " options tulip irq=3\n" | |
| //usage: " alias tulip tulip2\n" | |
| //usage: " options tulip2 irq=4 io=0x308\n" | |
| //usage: "\n" | |
| //usage: "Other functionality offered by 'classic' modprobe is not available in\n" | |
| //usage: "this implementation.\n" | |
| //usage: "\n" | |
| //usage: "If module options are present both in the config file, and on the command line,\n" | |
| //usage: "then the options from the command line will be passed to the module _after_\n" | |
| //usage: "the options from the config file. That way, you can have defaults in the config\n" | |
| //usage: "file, and override them for a specific usage from the command line.\n" | |
| //usage:#define modprobe_example_usage | |
| //usage: "(with the above /etc/modules.conf):\n\n" | |
| //usage: "$ modprobe tulip\n" | |
| //usage: " will load the module 'tulip' with default option 'irq=3'\n\n" | |
| //usage: "$ modprobe tulip irq=5\n" | |
| //usage: " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" | |
| //usage: "$ modprobe tulip2\n" | |
| //usage: " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" | |
| //usage: " which are the default for alias 'tulip2'\n\n" | |
| //usage: "$ modprobe tulip2 irq=8\n" | |
| //usage: " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" | |
| //usage: " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" | |
| //usage: " from the command line\n\n" | |
| //usage: "$ modprobe tulip2 irq=2 io=0x210\n" | |
| //usage: " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" | |
| //usage: " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" | |
| //usage: " from the command line\n" | |
| //usage: | |
| //usage:#define modprobe_trivial_usage | |
| //usage: "[-alrqvsD" IF_FEATURE_MODPROBE_BLACKLIST("b") "]" | |
| //usage: " MODULE" IF_FEATURE_CMDLINE_MODULE_OPTIONS(" [SYMBOL=VALUE]...") | |
| //usage:#define modprobe_full_usage "\n\n" | |
| //usage: " -a Load multiple MODULEs" | |
| //usage: "\n -l List (MODULE is a pattern)" | |
| //usage: "\n -r Remove MODULE (stacks) or do autoclean" | |
| //usage: "\n -q Quiet" | |
| //usage: "\n -v Verbose" | |
| //usage: "\n -s Log to syslog" | |
| //usage: "\n -D Show dependencies" | |
| //usage: IF_FEATURE_MODPROBE_BLACKLIST( | |
| //usage: "\n -b Apply blacklist to module names too" | |
| //usage: ) | |
| //usage:#endif /* !ENABLE_MODPROBE_SMALL */ | |
| /* Note: usage text doesn't document various 2.4 options | |
| * we pull in through INSMOD_OPTS define | |
| * Note2: -b is always accepted, but if !FEATURE_MODPROBE_BLACKLIST, | |
| * it is a no-op. | |
| */ | |
| #define MODPROBE_OPTS "alrDb" | |
| /* -a and -D _are_ in fact compatible */ | |
| #define MODPROBE_COMPLEMENTARY "q-v:v-q:l--arD:r--alD:a--lr:D--rl" | |
| //#define MODPROBE_OPTS "acd:lnrt:C:b" | |
| //#define MODPROBE_COMPLEMENTARY "q-v:v-q:l--acr:a--lr:r--al" | |
| enum { | |
| OPT_INSERT_ALL = (INSMOD_OPT_UNUSED << 0), /* a */ | |
| //OPT_DUMP_ONLY = (INSMOD_OPT_UNUSED << x), /* c */ | |
| //OPT_DIRNAME = (INSMOD_OPT_UNUSED << x), /* d */ | |
| OPT_LIST_ONLY = (INSMOD_OPT_UNUSED << 1), /* l */ | |
| //OPT_SHOW_ONLY = (INSMOD_OPT_UNUSED << x), /* n */ | |
| OPT_REMOVE = (INSMOD_OPT_UNUSED << 2), /* r */ | |
| //OPT_RESTRICT = (INSMOD_OPT_UNUSED << x), /* t */ | |
| //OPT_VERONLY = (INSMOD_OPT_UNUSED << x), /* V */ | |
| //OPT_CONFIGFILE = (INSMOD_OPT_UNUSED << x), /* C */ | |
| OPT_SHOW_DEPS = (INSMOD_OPT_UNUSED << 3), /* D */ | |
| OPT_BLACKLIST = (INSMOD_OPT_UNUSED << 4) * ENABLE_FEATURE_MODPROBE_BLACKLIST, | |
| }; | |
| #if ENABLE_LONG_OPTS | |
| static const char modprobe_longopts[] ALIGN1 = | |
| /* nobody asked for long opts (yet) */ | |
| // "all\0" No_argument "a" | |
| // "list\0" No_argument "l" | |
| // "remove\0" No_argument "r" | |
| // "quiet\0" No_argument "q" | |
| // "verbose\0" No_argument "v" | |
| // "syslog\0" No_argument "s" | |
| /* module-init-tools 3.11.1 has only long opt --show-depends | |
| * but no short -D, we provide long opt for scripts which | |
| * were written for 3.11.1: */ | |
| "show-depends\0" No_argument "D" | |
| // "use-blacklist\0" No_argument "b" | |
| ; | |
| #endif | |
| #define MODULE_FLAG_LOADED 0x0001 | |
| #define MODULE_FLAG_NEED_DEPS 0x0002 | |
| /* "was seen in modules.dep": */ | |
| #define MODULE_FLAG_FOUND_IN_MODDEP 0x0004 | |
| #define MODULE_FLAG_BLACKLISTED 0x0008 | |
| #define MODULE_FLAG_BUILTIN 0x0010 | |
| struct globals { | |
| llist_t *probes; /* MEs of module(s) requested on cmdline */ | |
| #if ENABLE_FEATURE_CMDLINE_MODULE_OPTIONS | |
| char *cmdline_mopts; /* module options from cmdline */ | |
| #endif | |
| int num_unresolved_deps; | |
| /* bool. "Did we have 'symbol:FOO' requested on cmdline?" */ | |
| smallint need_symbols; | |
| struct utsname uts; | |
| module_db db; | |
| } FIX_ALIASING; | |
| #define G (*ptr_to_globals) | |
| #define INIT_G() do { \ | |
| SET_PTR_TO_GLOBALS(xzalloc(sizeof(G))); \ | |
| } while (0) | |
| static int read_config(const char *path); | |
| static char *gather_options_str(char *opts, const char *append) | |
| { | |
| /* Speed-optimized. We call gather_options_str many times. */ | |
| if (append) { | |
| if (opts == NULL) { | |
| opts = xstrdup(append); | |
| } else { | |
| int optlen = strlen(opts); | |
| opts = xrealloc(opts, optlen + strlen(append) + 2); | |
| sprintf(opts + optlen, " %s", append); | |
| } | |
| } | |
| return opts; | |
| } | |
| static struct module_entry *get_or_add_modentry(const char *module) | |
| { | |
| return moddb_get_or_create(&G.db, module); | |
| } | |
| static void add_probe(const char *name) | |
| { | |
| struct module_entry *m; | |
| m = get_or_add_modentry(name); | |
| if (!(option_mask32 & (OPT_REMOVE | OPT_SHOW_DEPS)) | |
| && (m->flags & (MODULE_FLAG_LOADED | MODULE_FLAG_BUILTIN)) | |
| ) { | |
| DBG("skipping %s, it is already loaded", name); | |
| return; | |
| } | |
| DBG("queuing %s", name); | |
| m->probed_name = name; | |
| m->flags |= MODULE_FLAG_NEED_DEPS; | |
| llist_add_to_end(&G.probes, m); | |
| G.num_unresolved_deps++; | |
| if (ENABLE_FEATURE_MODUTILS_SYMBOLS | |
| && is_prefixed_with(m->modname, "symbol:") | |
| ) { | |
| G.need_symbols = 1; | |
| } | |
| } | |
| static int FAST_FUNC config_file_action(const char *filename, | |
| struct stat *statbuf UNUSED_PARAM, | |
| void *userdata UNUSED_PARAM, | |
| int depth) | |
| { | |
| char *tokens[3]; | |
| parser_t *p; | |
| struct module_entry *m; | |
| int rc = TRUE; | |
| const char *base; | |
| /* Skip files that begin with a "." */ | |
| base = bb_basename(filename); | |
| if (base[0] == '.') | |
| goto error; | |
| /* "man modprobe.d" from kmod version 22 suggests | |
| * that we shouldn't recurse into /etc/modprobe.d/dir/ | |
| * _subdirectories_: | |
| */ | |
| if (depth > 1) | |
| return SKIP; /* stop recursing */ | |
| //TODO: instead, can use dirAction in recursive_action() to SKIP dirs | |
| //on depth == 1 level. But that's more code... | |
| /* In dir recursion, skip files that do not end with a ".conf" | |
| * depth==0: read_config("modules.{symbols,alias}") must work, | |
| * "include FILE_NOT_ENDING_IN_CONF" must work too. | |
| */ | |
| if (depth != 0) { | |
| if (!is_suffixed_with(base, ".conf")) | |
| goto error; | |
| } | |
| p = config_open2(filename, fopen_for_read); | |
| if (p == NULL) { | |
| rc = FALSE; | |
| goto error; | |
| } | |
| while (config_read(p, tokens, 3, 2, "# \t", PARSE_NORMAL)) { | |
| //Use index_in_strings? | |
| if (strcmp(tokens[0], "alias") == 0) { | |
| /* alias <wildcard> <modulename> */ | |
| llist_t *l; | |
| char wildcard[MODULE_NAME_LEN]; | |
| char *rmod; | |
| if (tokens[2] == NULL) | |
| continue; | |
| filename2modname(tokens[1], wildcard); | |
| for (l = G.probes; l; l = l->link) { | |
| m = (struct module_entry *) l->data; | |
| if (fnmatch(wildcard, m->modname, 0) != 0) | |
| continue; | |
| rmod = filename2modname(tokens[2], NULL); | |
| llist_add_to(&m->realnames, rmod); | |
| if (m->flags & MODULE_FLAG_NEED_DEPS) { | |
| m->flags &= ~MODULE_FLAG_NEED_DEPS; | |
| G.num_unresolved_deps--; | |
| } | |
| m = get_or_add_modentry(rmod); | |
| if (!(m->flags & MODULE_FLAG_NEED_DEPS)) { | |
| m->flags |= MODULE_FLAG_NEED_DEPS; | |
| G.num_unresolved_deps++; | |
| } | |
| } | |
| } else if (strcmp(tokens[0], "options") == 0) { | |
| /* options <modulename> <option...> */ | |
| if (tokens[2] == NULL) | |
| continue; | |
| m = get_or_add_modentry(tokens[1]); | |
| m->options = gather_options_str(m->options, tokens[2]); | |
| } else if (strcmp(tokens[0], "include") == 0) { | |
| /* include <filename>/<dirname> (yes, directories also must work) */ | |
| read_config(tokens[1]); | |
| } else if (ENABLE_FEATURE_MODPROBE_BLACKLIST | |
| && strcmp(tokens[0], "blacklist") == 0 | |
| ) { | |
| /* blacklist <modulename> */ | |
| get_or_add_modentry(tokens[1])->flags |= MODULE_FLAG_BLACKLISTED; | |
| } | |
| } | |
| config_close(p); | |
| error: | |
| return rc; | |
| } | |
| static int read_config(const char *path) | |
| { | |
| return recursive_action(path, ACTION_RECURSE | ACTION_QUIET, | |
| config_file_action, NULL, NULL, | |
| /*depth:*/ 0); | |
| } | |
| static const char *humanly_readable_name(struct module_entry *m) | |
| { | |
| /* probed_name may be NULL. modname always exists. */ | |
| return m->probed_name ? m->probed_name : m->modname; | |
| } | |
| /* Like strsep(&stringp, "\n\t ") but quoted text goes to single token | |
| * even if it contains whitespace. | |
| */ | |
| static char *strsep_quotes(char **stringp) | |
| { | |
| char *s, *start = *stringp; | |
| if (!start) | |
| return NULL; | |
| for (s = start; ; s++) { | |
| switch (*s) { | |
| case '"': | |
| s = strchrnul(s + 1, '"'); /* find trailing quote */ | |
| if (*s != '\0') | |
| s++; /* skip trailing quote */ | |
| /* fall through */ | |
| case '\0': | |
| case '\n': | |
| case '\t': | |
| case ' ': | |
| if (*s != '\0') { | |
| *s = '\0'; | |
| *stringp = s + 1; | |
| } else { | |
| *stringp = NULL; | |
| } | |
| return start; | |
| } | |
| } | |
| } | |
| static char *parse_and_add_kcmdline_module_options(char *options, const char *modulename) | |
| { | |
| char *kcmdline_buf; | |
| char *kcmdline; | |
| char *kptr; | |
| kcmdline_buf = xmalloc_open_read_close("/proc/cmdline", NULL); | |
| if (!kcmdline_buf) | |
| return options; | |
| kcmdline = kcmdline_buf; | |
| while ((kptr = strsep_quotes(&kcmdline)) != NULL) { | |
| char *after_modulename = is_prefixed_with(kptr, modulename); | |
| if (!after_modulename || *after_modulename != '.') | |
| continue; | |
| /* It is "modulename.xxxx" */ | |
| kptr = after_modulename + 1; | |
| if (strchr(kptr, '=') != NULL) { | |
| /* It is "modulename.opt=[val]" */ | |
| options = gather_options_str(options, kptr); | |
| } | |
| } | |
| free(kcmdline_buf); | |
| return options; | |
| } | |
| /* Return: similar to bb_init_module: | |
| * 0 on success, | |
| * -errno on open/read error, | |
| * errno on init_module() error | |
| */ | |
| /* NB: INSMOD_OPT_SILENT bit suppresses ONLY non-existent modules, | |
| * not deleted ones (those are still listed in modules.dep). | |
| * module-init-tools version 3.4: | |
| * # modprobe bogus | |
| * FATAL: Module bogus not found. [exitcode 1] | |
| * # modprobe -q bogus [silent, exitcode still 1] | |
| * but: | |
| * # rm kernel/drivers/net/dummy.ko | |
| * # modprobe -q dummy | |
| * FATAL: Could not open '/lib/modules/xxx/kernel/drivers/net/dummy.ko': No such file or directory | |
| * [exitcode 1] | |
| */ | |
| static int do_modprobe(struct module_entry *m) | |
| { | |
| int rc, first; | |
| if (!(m->flags & MODULE_FLAG_FOUND_IN_MODDEP)) { | |
| if (!(option_mask32 & INSMOD_OPT_SILENT)) | |
| bb_error_msg((m->flags & MODULE_FLAG_BUILTIN) ? | |
| "module %s is builtin" : | |
| "module %s not found in modules.dep", | |
| humanly_readable_name(m)); | |
| return -ENOENT; | |
| } | |
| DBG("do_modprob'ing %s", m->modname); | |
| if (!(option_mask32 & OPT_REMOVE)) | |
| m->deps = llist_rev(m->deps); | |
| if (0) { | |
| llist_t *l; | |
| for (l = m->deps; l; l = l->link) | |
| DBG("dep: %s", l->data); | |
| } | |
| first = 1; | |
| rc = 0; | |
| while (m->deps) { | |
| struct module_entry *m2; | |
| char *fn, *options; | |
| rc = 0; | |
| fn = llist_pop(&m->deps); /* we leak it */ | |
| m2 = get_or_add_modentry(bb_get_last_path_component_nostrip(fn)); | |
| if (option_mask32 & OPT_REMOVE) { | |
| /* modprobe -r */ | |
| if (m2->flags & MODULE_FLAG_LOADED) { | |
| rc = bb_delete_module(m2->modname, O_EXCL); | |
| if (rc) { | |
| if (first) { | |
| bb_perror_msg("can't unload module '%s'", | |
| humanly_readable_name(m2)); | |
| break; | |
| } | |
| } else { | |
| m2->flags &= ~MODULE_FLAG_LOADED; | |
| } | |
| } | |
| /* do not error out if *deps* fail to unload */ | |
| first = 0; | |
| continue; | |
| } | |
| options = m2->options; | |
| m2->options = NULL; | |
| options = parse_and_add_kcmdline_module_options(options, m2->modname); | |
| #if ENABLE_FEATURE_CMDLINE_MODULE_OPTIONS | |
| if (m == m2) | |
| options = gather_options_str(options, G.cmdline_mopts); | |
| #endif | |
| if (option_mask32 & OPT_SHOW_DEPS) { | |
| printf(options ? "insmod %s/%s/%s %s\n" | |
| : "insmod %s/%s/%s\n", | |
| CONFIG_DEFAULT_MODULES_DIR, G.uts.release, fn, | |
| options); | |
| free(options); | |
| continue; | |
| } | |
| if (m2->flags & MODULE_FLAG_LOADED) { | |
| DBG("%s is already loaded, skipping", fn); | |
| free(options); | |
| continue; | |
| } | |
| rc = bb_init_module(fn, options); | |
| DBG("loaded %s '%s', rc:%d", fn, options, rc); | |
| if (rc == EEXIST) | |
| rc = 0; | |
| free(options); | |
| if (rc) { | |
| bb_error_msg("can't load module %s (%s): %s", | |
| humanly_readable_name(m2), | |
| fn, | |
| moderror(rc) | |
| ); | |
| break; | |
| } | |
| m2->flags |= MODULE_FLAG_LOADED; | |
| } | |
| return rc; | |
| } | |
| static void load_modules_dep(void) | |
| { | |
| struct module_entry *m; | |
| char *colon, *tokens[2]; | |
| parser_t *p; | |
| /* Modprobe does not work at all without modules.dep, | |
| * even if the full module name is given. Returning error here | |
| * was making us later confuse user with this message: | |
| * "module /full/path/to/existing/file/module.ko not found". | |
| * It's better to die immediately, with good message. | |
| * xfopen_for_read provides that. */ | |
| p = config_open2(CONFIG_DEFAULT_DEPMOD_FILE, xfopen_for_read); | |
| while (G.num_unresolved_deps | |
| && config_read(p, tokens, 2, 1, "# \t", PARSE_NORMAL) | |
| ) { | |
| colon = last_char_is(tokens[0], ':'); | |
| if (colon == NULL) | |
| continue; | |
| *colon = '\0'; | |
| m = moddb_get(&G.db, bb_get_last_path_component_nostrip(tokens[0])); | |
| if (m == NULL) | |
| continue; | |
| /* Optimization... */ | |
| if ((m->flags & MODULE_FLAG_LOADED) | |
| && !(option_mask32 & (OPT_REMOVE | OPT_SHOW_DEPS)) | |
| ) { | |
| DBG("skip deps of %s, it's already loaded", tokens[0]); | |
| continue; | |
| } | |
| m->flags |= MODULE_FLAG_FOUND_IN_MODDEP; | |
| if ((m->flags & MODULE_FLAG_NEED_DEPS) && (m->deps == NULL)) { | |
| G.num_unresolved_deps--; | |
| llist_add_to(&m->deps, xstrdup(tokens[0])); | |
| if (tokens[1]) | |
| string_to_llist(tokens[1], &m->deps, " \t"); | |
| } else | |
| DBG("skipping dep line"); | |
| } | |
| config_close(p); | |
| } | |
| int modprobe_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; | |
| int modprobe_main(int argc UNUSED_PARAM, char **argv) | |
| { | |
| int rc; | |
| unsigned opt; | |
| struct module_entry *me; | |
| INIT_G(); | |
| opt = getopt32long(argv, "^" INSMOD_OPTS MODPROBE_OPTS "\0" MODPROBE_COMPLEMENTARY, | |
| modprobe_longopts | |
| INSMOD_ARGS | |
| ); | |
| argv += optind; | |
| /* Goto modules location */ | |
| xchdir(CONFIG_DEFAULT_MODULES_DIR); | |
| uname(&G.uts); | |
| xchdir(G.uts.release); | |
| if (opt & OPT_LIST_ONLY) { | |
| int i; | |
| char *colon, *tokens[2]; | |
| parser_t *p = config_open2(CONFIG_DEFAULT_DEPMOD_FILE, xfopen_for_read); | |
| for (i = 0; argv[i]; i++) | |
| replace(argv[i], '-', '_'); | |
| while (config_read(p, tokens, 2, 1, "# \t", PARSE_NORMAL)) { | |
| colon = last_char_is(tokens[0], ':'); | |
| if (!colon) | |
| continue; | |
| *colon = '\0'; | |
| if (!argv[0]) | |
| puts(tokens[0]); | |
| else { | |
| char name[MODULE_NAME_LEN]; | |
| filename2modname( | |
| bb_get_last_path_component_nostrip(tokens[0]), | |
| name | |
| ); | |
| for (i = 0; argv[i]; i++) { | |
| if (fnmatch(argv[i], name, 0) == 0) { | |
| puts(tokens[0]); | |
| } | |
| } | |
| } | |
| } | |
| return EXIT_SUCCESS; | |
| } | |
| /* Yes, for some reason -l ignores -s... */ | |
| if (opt & INSMOD_OPT_SYSLOG) | |
| logmode = LOGMODE_SYSLOG; | |
| if (!argv[0]) { | |
| if (opt & OPT_REMOVE) { | |
| /* "modprobe -r" (w/o params). | |
| * "If name is NULL, all unused modules marked | |
| * autoclean will be removed". | |
| */ | |
| if (bb_delete_module(NULL, O_NONBLOCK | O_EXCL) != 0) | |
| bb_perror_nomsg_and_die(); | |
| } | |
| return EXIT_SUCCESS; | |
| } | |
| /* Retrieve module names of already loaded modules */ | |
| { | |
| char *s; | |
| parser_t *parser = config_open2("/proc/modules", fopen_for_read); | |
| while (config_read(parser, &s, 1, 1, "# \t", PARSE_NORMAL & ~PARSE_GREEDY)) | |
| get_or_add_modentry(s)->flags |= MODULE_FLAG_LOADED; | |
| config_close(parser); | |
| parser = config_open2("modules.builtin", fopen_for_read); | |
| while (config_read(parser, &s, 1, 1, "# \t", PARSE_NORMAL)) | |
| get_or_add_modentry(s)->flags |= MODULE_FLAG_BUILTIN; | |
| config_close(parser); | |
| } | |
| if (opt & (OPT_INSERT_ALL | OPT_REMOVE)) { | |
| /* Each argument is a module name */ | |
| do { | |
| DBG("adding module %s", *argv); | |
| add_probe(*argv++); | |
| } while (*argv); | |
| } else { | |
| /* First argument is module name, rest are parameters */ | |
| DBG("probing just module %s", *argv); | |
| add_probe(argv[0]); | |
| #if ENABLE_FEATURE_CMDLINE_MODULE_OPTIONS | |
| G.cmdline_mopts = parse_cmdline_module_options(argv, /*quote_spaces:*/ 1); | |
| #endif | |
| } | |
| /* Happens if all requested modules are already loaded */ | |
| if (G.probes == NULL) | |
| return EXIT_SUCCESS; | |
| read_config("/etc/modprobe.conf"); | |
| read_config("/etc/modprobe.d"); | |
| if (ENABLE_FEATURE_MODUTILS_SYMBOLS && G.need_symbols) | |
| read_config("modules.symbols"); | |
| load_modules_dep(); | |
| if (ENABLE_FEATURE_MODUTILS_ALIAS && G.num_unresolved_deps) { | |
| read_config("modules.alias"); | |
| load_modules_dep(); | |
| } | |
| rc = 0; | |
| while ((me = llist_pop(&G.probes)) != NULL) { | |
| if (me->realnames == NULL) { | |
| DBG("probing by module name"); | |
| /* This is not an alias. Literal names are blacklisted | |
| * only if '-b' is given. | |
| */ | |
| if (!(opt & OPT_BLACKLIST) | |
| || !(me->flags & MODULE_FLAG_BLACKLISTED) | |
| ) { | |
| rc |= do_modprobe(me); | |
| } | |
| continue; | |
| } | |
| /* Probe all real names for the alias */ | |
| do { | |
| char *realname = llist_pop(&me->realnames); | |
| struct module_entry *m2; | |
| DBG("probing alias %s by realname %s", me->modname, realname); | |
| m2 = get_or_add_modentry(realname); | |
| if (!(m2->flags & MODULE_FLAG_BLACKLISTED) | |
| && (!(m2->flags & MODULE_FLAG_LOADED) | |
| || (opt & (OPT_REMOVE | OPT_SHOW_DEPS))) | |
| ) { | |
| //TODO: we can pass "me" as 2nd param to do_modprobe, | |
| //and make do_modprobe emit more meaningful error messages | |
| //with alias name included, not just module name alias resolves to. | |
| rc |= do_modprobe(m2); | |
| } | |
| free(realname); | |
| } while (me->realnames != NULL); | |
| } | |
| if (ENABLE_FEATURE_CLEAN_UP) | |
| moddb_free(&G.db); | |
| return (rc != 0); | |
| } |