| /* vi: set sw=4 ts=4: */ | |
| /* | |
| * lsscsi implementation for busybox | |
| * | |
| * Copyright (C) 2017 Markus Gothe <nietzsche@lysator.liu.se> | |
| * | |
| * Licensed under GPLv2 or later, see file LICENSE in this source tree. | |
| */ | |
| //config:config LSSCSI | |
| //config: bool "lsscsi (2.5 kb)" | |
| //config: default y | |
| //config: #select PLATFORM_LINUX | |
| //config: help | |
| //config: lsscsi is a utility for displaying information about SCSI buses in the | |
| //config: system and devices connected to them. | |
| //config: | |
| //config: This version uses sysfs (/sys/bus/scsi/devices) only. | |
| //applet:IF_LSSCSI(APPLET_NOEXEC(lsscsi, lsscsi, BB_DIR_USR_BIN, BB_SUID_DROP, lsscsi)) | |
| //kbuild:lib-$(CONFIG_LSSCSI) += lsscsi.o | |
| //usage:#define lsscsi_trivial_usage NOUSAGE_STR | |
| //usage:#define lsscsi_full_usage "" | |
| #include "libbb.h" | |
| static const char scsi_dir[] ALIGN1 = "/sys/bus/scsi/devices"; | |
| static char *get_line(const char *filename, char *buf, unsigned *bufsize_p) | |
| { | |
| unsigned bufsize = *bufsize_p; | |
| ssize_t sz; | |
| if ((int)(bufsize - 2) <= 0) | |
| return buf; | |
| sz = open_read_close(filename, buf, bufsize - 2); | |
| if (sz < 0) | |
| sz = 0; | |
| buf[sz] = '\0'; | |
| sz = (trim(buf) - buf) + 1; | |
| bufsize -= sz; | |
| buf += sz; | |
| buf[0] = '\0'; | |
| *bufsize_p = bufsize; | |
| return buf; | |
| } | |
| int lsscsi_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; | |
| int lsscsi_main(int argc UNUSED_PARAM, char **argv UNUSED_PARAM) | |
| { | |
| struct dirent *de; | |
| DIR *dir; | |
| xchdir(scsi_dir); | |
| dir = xopendir("."); | |
| while ((de = readdir(dir)) != NULL) { | |
| char buf[256]; | |
| char *ptr; | |
| unsigned bufsize; | |
| const char *vendor; | |
| const char *type_str; | |
| const char *type_name; | |
| const char *model; | |
| const char *rev; | |
| unsigned type; | |
| if (!isdigit(de->d_name[0])) | |
| continue; | |
| if (!strchr(de->d_name, ':')) | |
| continue; | |
| if (chdir(de->d_name) != 0) | |
| continue; | |
| bufsize = sizeof(buf); | |
| vendor = buf; | |
| ptr = get_line("vendor", buf, &bufsize); | |
| type_str = ptr; | |
| ptr = get_line("type", ptr, &bufsize); | |
| model = ptr; | |
| ptr = get_line("model", ptr, &bufsize); | |
| rev = ptr; | |
| ptr = get_line("rev", ptr, &bufsize); | |
| printf("[%s]\t", de->d_name); | |
| #define scsi_device_types \ | |
| "disk\0" "tape\0" "printer\0" "process\0" \ | |
| "worm\0" "\0" "scanner\0" "optical\0" \ | |
| "mediumx\0" "comms\0" "\0" "\0" \ | |
| "storage\0" "enclosu\0" "sim dsk\0" "opti rd\0" \ | |
| "bridge\0" "osd\0" "adi\0" "\0" \ | |
| "\0" "\0" "\0" "\0" \ | |
| "\0" "\0" "\0" "\0" \ | |
| "\0" "\0" "wlun\0" "no dev" | |
| type = bb_strtou(type_str, NULL, 10); | |
| if (errno | |
| || type >= 0x20 | |
| || (type_name = nth_string(scsi_device_types, type))[0] == '\0' | |
| ) { | |
| printf("(%s)\t", type_str); | |
| } else { | |
| printf("%s\t", type_name); | |
| } | |
| printf("%s\t""%s\t""%s\n", | |
| vendor, | |
| model, | |
| rev | |
| ); | |
| /* TODO: also output device column, e.g. "/dev/sdX" */ | |
| /* chdir("..") may not work as expected, | |
| * since we might have followed a symlink. | |
| */ | |
| xchdir(scsi_dir); | |
| } | |
| if (ENABLE_FEATURE_CLEAN_UP) | |
| closedir(dir); | |
| return EXIT_SUCCESS; | |
| } |