| /* vi: set sw=4 ts=4: */ | |
| /* | |
| * Copyright 2003, Glenn McGrath | |
| * | |
| * Licensed under GPLv2 or later, see file LICENSE in this source tree. | |
| * | |
| * Based on specification from | |
| * http://www.opengroup.org/onlinepubs/007904975/utilities/uuencode.html | |
| * | |
| * Bugs: the spec doesn't mention anything about "`\n`\n" prior to the | |
| * "end" line | |
| */ | |
| //config:config UUDECODE | |
| //config: bool "uudecode (5.8 kb)" | |
| //config: default y | |
| //config: help | |
| //config: uudecode is used to decode a uuencoded file. | |
| //applet:IF_UUDECODE(APPLET(uudecode, BB_DIR_USR_BIN, BB_SUID_DROP)) | |
| //kbuild:lib-$(CONFIG_UUDECODE) += uudecode.o | |
| //usage:#define uudecode_trivial_usage | |
| //usage: "[-o OUTFILE] [INFILE]" | |
| //usage:#define uudecode_full_usage "\n\n" | |
| //usage: "Uudecode a file\n" | |
| //usage: "Finds OUTFILE in uuencoded source unless -o is given" | |
| //usage: | |
| //usage:#define uudecode_example_usage | |
| //usage: "$ uudecode -o busybox busybox.uu\n" | |
| //usage: "$ ls -l busybox\n" | |
| //usage: "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n" | |
| #include "libbb.h" | |
| #if ENABLE_UUDECODE | |
| static void FAST_FUNC read_stduu(FILE *src_stream, FILE *dst_stream, int flags UNUSED_PARAM) | |
| { | |
| char *line; | |
| for (;;) { | |
| int encoded_len, str_len; | |
| char *line_ptr, *dst; | |
| size_t line_len; | |
| line_len = 64 * 1024; | |
| line = xmalloc_fgets_str_len(src_stream, "\n", &line_len); | |
| if (!line) | |
| break; | |
| /* Handle both Unix and MSDOS text. | |
| * Note: space should not be trimmed, some encoders use it instead of "`" | |
| * for padding of last incomplete 4-char block. | |
| */ | |
| str_len = line_len; | |
| while (--str_len >= 0 | |
| && (line[str_len] == '\n' || line[str_len] == '\r') | |
| ) { | |
| line[str_len] = '\0'; | |
| } | |
| if (strcmp(line, "end") == 0) { | |
| return; /* the only non-error exit */ | |
| } | |
| line_ptr = line; | |
| while (*line_ptr) { | |
| *line_ptr = (*line_ptr - 0x20) & 0x3f; | |
| line_ptr++; | |
| } | |
| str_len = line_ptr - line; | |
| encoded_len = line[0] * 4 / 3; | |
| /* Check that line is not too short. (we tolerate | |
| * overly _long_ line to accommodate possible extra "`"). | |
| * Empty line case is also caught here. */ | |
| if (str_len <= encoded_len) { | |
| break; /* go to bb_error_msg_and_die("short file"); */ | |
| } | |
| if (encoded_len <= 0) { | |
| /* Ignore the "`\n" line, why is it even in the encode file ? */ | |
| free(line); | |
| continue; | |
| } | |
| if (encoded_len > 60) { | |
| bb_simple_error_msg_and_die("line too long"); | |
| } | |
| dst = line; | |
| line_ptr = line + 1; | |
| do { | |
| /* Merge four 6 bit chars to three 8 bit chars */ | |
| *dst++ = line_ptr[0] << 2 | line_ptr[1] >> 4; | |
| encoded_len--; | |
| if (encoded_len == 0) { | |
| break; | |
| } | |
| *dst++ = line_ptr[1] << 4 | line_ptr[2] >> 2; | |
| encoded_len--; | |
| if (encoded_len == 0) { | |
| break; | |
| } | |
| *dst++ = line_ptr[2] << 6 | line_ptr[3]; | |
| line_ptr += 4; | |
| encoded_len -= 2; | |
| } while (encoded_len > 0); | |
| fwrite(line, 1, dst - line, dst_stream); | |
| free(line); | |
| } | |
| bb_simple_error_msg_and_die("short file"); | |
| } | |
| #endif | |
| #if ENABLE_UUDECODE | |
| int uudecode_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; | |
| int uudecode_main(int argc UNUSED_PARAM, char **argv) | |
| { | |
| FILE *src_stream; | |
| char *outname = NULL; | |
| char *line; | |
| getopt32(argv, "^" "o:" "\0" "?1"/* 1 arg max*/, &outname); | |
| argv += optind; | |
| if (!argv[0]) | |
| *--argv = (char*)"-"; | |
| src_stream = xfopen_stdin(argv[0]); | |
| /* Search for the start of the encoding */ | |
| while ((line = xmalloc_fgetline(src_stream)) != NULL) { | |
| void FAST_FUNC (*decode_fn_ptr)(FILE *src, FILE *dst, int flags); | |
| char *line_ptr; | |
| FILE *dst_stream; | |
| int mode; | |
| if (is_prefixed_with(line, "begin-base64 ")) { | |
| line_ptr = line + 13; | |
| decode_fn_ptr = read_base64; | |
| } else if (is_prefixed_with(line, "begin ")) { | |
| line_ptr = line + 6; | |
| decode_fn_ptr = read_stduu; | |
| } else { | |
| free(line); | |
| continue; | |
| } | |
| /* begin line found. decode and exit */ | |
| mode = bb_strtou(line_ptr, NULL, 8); | |
| if (outname == NULL) { | |
| outname = strchr(line_ptr, ' '); | |
| if (!outname) | |
| break; | |
| outname++; | |
| trim(outname); /* remove trailing space (and '\r' for DOS text) */ | |
| if (!outname[0]) | |
| break; | |
| } | |
| dst_stream = stdout; | |
| if (NOT_LONE_DASH(outname)) { | |
| dst_stream = xfopen_for_write(outname); | |
| fchmod(fileno(dst_stream), mode & (S_IRWXU | S_IRWXG | S_IRWXO)); | |
| } | |
| free(line); | |
| decode_fn_ptr(src_stream, dst_stream, /*flags:*/ BASE64_FLAG_UU_STOP + BASE64_FLAG_NO_STOP_CHAR); | |
| /* fclose_if_not_stdin(src_stream); - redundant */ | |
| return EXIT_SUCCESS; | |
| } | |
| bb_simple_error_msg_and_die("no 'begin' line"); | |
| } | |
| #endif | |
| //applet:IF_BASE64(APPLET(base64, BB_DIR_BIN, BB_SUID_DROP)) | |
| //kbuild:lib-$(CONFIG_BASE64) += uudecode.o | |
| //config:config BASE64 | |
| //config: bool "base64 (4.9 kb)" | |
| //config: default y | |
| //config: help | |
| //config: Base64 encode and decode | |
| //usage:#define base64_trivial_usage | |
| //usage: "[-d] [FILE]" | |
| //usage:#define base64_full_usage "\n\n" | |
| //usage: "Base64 encode or decode FILE to standard output" | |
| //usage: "\n -d Decode data" | |
| ////usage: "\n -w COL Wrap lines at COL (default 76, 0 disables)" | |
| ////usage: "\n -i When decoding, ignore non-alphabet characters" | |
| #if ENABLE_BASE64 | |
| int base64_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; | |
| int base64_main(int argc UNUSED_PARAM, char **argv) | |
| { | |
| FILE *src_stream; | |
| unsigned opts; | |
| opts = getopt32(argv, "^" "d" "\0" "?1"/* 1 arg max*/); | |
| argv += optind; | |
| if (!argv[0]) | |
| *--argv = (char*)"-"; | |
| src_stream = xfopen_stdin(argv[0]); | |
| if (opts) { | |
| read_base64(src_stream, stdout, /*flags:*/ (char)EOF); | |
| } else { | |
| enum { | |
| SRC_BUF_SIZE = 76/4*3, /* This *MUST* be a multiple of 3 */ | |
| DST_BUF_SIZE = 4 * ((SRC_BUF_SIZE + 2) / 3), | |
| }; | |
| char src_buf[SRC_BUF_SIZE]; | |
| char dst_buf[DST_BUF_SIZE + 1]; | |
| int src_fd = fileno(src_stream); | |
| while (1) { | |
| size_t size = full_read(src_fd, src_buf, SRC_BUF_SIZE); | |
| if (!size) | |
| break; | |
| if ((ssize_t)size < 0) | |
| bb_simple_perror_msg_and_die(bb_msg_read_error); | |
| /* Encode the buffer we just read in */ | |
| bb_uuencode(dst_buf, src_buf, size, bb_uuenc_tbl_base64); | |
| xwrite(STDOUT_FILENO, dst_buf, 4 * ((size + 2) / 3)); | |
| bb_putchar('\n'); | |
| fflush(stdout); | |
| } | |
| } | |
| fflush_stdout_and_exit(EXIT_SUCCESS); | |
| } | |
| #endif | |
| /* Test script. | |
| Put this into an empty dir with busybox binary, an run. | |
| #!/bin/sh | |
| test -x busybox || { echo "No ./busybox?"; exit; } | |
| ln -sf busybox uudecode | |
| ln -sf busybox uuencode | |
| >A_null | |
| echo -n A >A | |
| echo -n AB >AB | |
| echo -n ABC >ABC | |
| echo -n ABCD >ABCD | |
| echo -n ABCDE >ABCDE | |
| echo -n ABCDEF >ABCDEF | |
| cat busybox >A_bbox | |
| for f in A*; do | |
| echo uuencode $f | |
| ./uuencode $f <$f >u_$f | |
| ./uuencode -m $f <$f >m_$f | |
| done | |
| mkdir unpk_u unpk_m 2>/dev/null | |
| for f in u_*; do | |
| ./uudecode <$f -o unpk_u/${f:2} | |
| diff -a ${f:2} unpk_u/${f:2} >/dev/null 2>&1 | |
| echo uudecode $f: $? | |
| done | |
| for f in m_*; do | |
| ./uudecode <$f -o unpk_m/${f:2} | |
| diff -a ${f:2} unpk_m/${f:2} >/dev/null 2>&1 | |
| echo uudecode $f: $? | |
| done | |
| */ |