| /* vi: set sw=4 ts=4: */ | |
| /* | |
| * od implementation for busybox | |
| * Based on code from util-linux v 2.11l | |
| * | |
| * Copyright (c) 1990 | |
| * The Regents of the University of California. All rights reserved. | |
| * | |
| * Licensed under GPLv2 or later, see file LICENSE in this source tree. | |
| * | |
| * Original copyright notice is retained at the end of this file. | |
| */ | |
| //config:config OD | |
| //config: bool "od (11 kb)" | |
| //config: default y | |
| //config: help | |
| //config: od is used to dump binary files in octal and other formats. | |
| //applet:IF_OD(APPLET(od, BB_DIR_USR_BIN, BB_SUID_DROP)) | |
| //kbuild:lib-$(CONFIG_OD) += od.o | |
| //usage:#if !ENABLE_DESKTOP | |
| //usage:#define od_trivial_usage | |
| //usage: "[-aBbcDdeFfHhIiLlOovXx] [FILE]" | |
| //usage:#define od_full_usage "\n\n" | |
| //usage: "Print FILE (or stdin) unambiguously, as octal bytes by default" | |
| //usage:#endif | |
| #include "libbb.h" | |
| #if ENABLE_DESKTOP | |
| /* This one provides -t (busybox's own build script needs it) */ | |
| #include "od_bloaty.c" | |
| #else | |
| #include "dump.h" | |
| static void | |
| odoffset(dumper_t *dumper, int argc, char ***argvp) | |
| { | |
| char *num, *p; | |
| int base; | |
| char *end; | |
| /* | |
| * The offset syntax of od(1) was genuinely bizarre. First, if | |
| * it started with a plus it had to be an offset. Otherwise, if | |
| * there were at least two arguments, a number or lower-case 'x' | |
| * followed by a number makes it an offset. By default it was | |
| * octal; if it started with 'x' or '0x' it was hex. If it ended | |
| * in a '.', it was decimal. If a 'b' or 'B' was appended, it | |
| * multiplied the number by 512 or 1024 byte units. There was | |
| * no way to assign a block count to a hex offset. | |
| * | |
| * We assumes it's a file if the offset is bad. | |
| */ | |
| p = **argvp; | |
| if (!p) { | |
| /* hey someone is probably piping to us ... */ | |
| return; | |
| } | |
| if ((*p != '+') | |
| && (argc < 2 | |
| || (!isdigit(p[0]) | |
| && ((p[0] != 'x') || !isxdigit(p[1]))))) | |
| return; | |
| base = 0; | |
| /* | |
| * skip over leading '+', 'x[0-9a-fA-f]' or '0x', and | |
| * set base. | |
| */ | |
| if (p[0] == '+') | |
| ++p; | |
| if (p[0] == 'x' && isxdigit(p[1])) { | |
| ++p; | |
| base = 16; | |
| } else if (p[0] == '0' && p[1] == 'x') { | |
| p += 2; | |
| base = 16; | |
| } | |
| /* skip over the number */ | |
| if (base == 16) | |
| for (num = p; isxdigit(*p); ++p) | |
| continue; | |
| else | |
| for (num = p; isdigit(*p); ++p) | |
| continue; | |
| /* check for no number */ | |
| if (num == p) | |
| return; | |
| /* if terminates with a '.', base is decimal */ | |
| if (*p == '.') { | |
| if (base) | |
| return; | |
| base = 10; | |
| } | |
| dumper->dump_skip = strtol(num, &end, base ? base : 8); | |
| /* if end isn't the same as p, we got a non-octal digit */ | |
| if (end != p) | |
| dumper->dump_skip = 0; | |
| else { | |
| if (*p) { | |
| if (*p == 'b') { | |
| dumper->dump_skip *= 512; | |
| ++p; | |
| } else if (*p == 'B') { | |
| dumper->dump_skip *= 1024; | |
| ++p; | |
| } | |
| } | |
| if (*p) | |
| dumper->dump_skip = 0; | |
| else { | |
| ++*argvp; | |
| /* | |
| * If the offset uses a non-octal base, the base of | |
| * the offset is changed as well. This isn't pretty, | |
| * but it's easy. | |
| */ | |
| #define TYPE_OFFSET 7 | |
| { | |
| char x_or_d; | |
| if (base == 16) { | |
| x_or_d = 'x'; | |
| goto DO_X_OR_D; | |
| } | |
| if (base == 10) { | |
| x_or_d = 'd'; | |
| DO_X_OR_D: | |
| dumper->fshead->nextfu->fmt[TYPE_OFFSET] | |
| = dumper->fshead->nextfs->nextfu->fmt[TYPE_OFFSET] | |
| = x_or_d; | |
| } | |
| } | |
| } | |
| } | |
| } | |
| static const char *const add_strings[] = { | |
| "16/1 \"%3_u \" \"\\n\"", /* a */ | |
| "8/2 \" %06o \" \"\\n\"", /* B, o */ | |
| "16/1 \"%03o \" \"\\n\"", /* b */ | |
| "16/1 \"%3_c \" \"\\n\"", /* c */ | |
| "8/2 \" %05u \" \"\\n\"", /* d */ | |
| "4/4 \" %010u \" \"\\n\"", /* D */ | |
| "2/8 \" %21.14e \" \"\\n\"", /* e (undocumented in od), F */ | |
| "4/4 \" %14.7e \" \"\\n\"", /* f */ | |
| "4/4 \" %08x \" \"\\n\"", /* H, X */ | |
| "8/2 \" %04x \" \"\\n\"", /* h, x */ | |
| "4/4 \" %11d \" \"\\n\"", /* I, L, l */ | |
| "8/2 \" %6d \" \"\\n\"", /* i */ | |
| "4/4 \" %011o \" \"\\n\"", /* O */ | |
| }; | |
| static const char od_opts[] ALIGN1 = "aBbcDdeFfHhIiLlOoXxv"; | |
| static const char od_o2si[] ALIGN1 = { | |
| 0, 1, 2, 3, 5, | |
| 4, 6, 6, 7, 8, | |
| 9, 0xa, 0xb, 0xa, 0xa, | |
| 0xb, 1, 8, 9, | |
| }; | |
| int od_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; | |
| int od_main(int argc, char **argv) | |
| { | |
| int ch; | |
| int first = 1; | |
| char *p; | |
| dumper_t *dumper = alloc_dumper(); | |
| while ((ch = getopt(argc, argv, od_opts)) > 0) { | |
| if (ch == 'v') { | |
| dumper->dump_vflag = ALL; | |
| } else if (((p = strchr(od_opts, ch)) != NULL) && (*p != '\0')) { | |
| if (first) { | |
| first = 0; | |
| bb_dump_add(dumper, "\"%07.7_Ao\n\""); | |
| bb_dump_add(dumper, "\"%07.7_ao \""); | |
| } else { | |
| bb_dump_add(dumper, "\" \""); | |
| } | |
| bb_dump_add(dumper, add_strings[(int)od_o2si[(p - od_opts)]]); | |
| } else { /* P, p, s, w, or other unhandled */ | |
| bb_show_usage(); | |
| } | |
| } | |
| if (!dumper->fshead) { | |
| bb_dump_add(dumper, "\"%07.7_Ao\n\""); | |
| bb_dump_add(dumper, "\"%07.7_ao \" 8/2 \"%06o \" \"\\n\""); | |
| } | |
| argc -= optind; | |
| argv += optind; | |
| odoffset(dumper, argc, &argv); | |
| return bb_dump_dump(dumper, argv); | |
| } | |
| #endif /* ENABLE_DESKTOP */ | |
| /*- | |
| * Copyright (c) 1990 The Regents of the University of California. | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * 3. Neither the name of the University nor the names of its contributors | |
| * may be used to endorse or promote products derived from this software | |
| * without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ''AS IS'' AND | |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE | |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | |
| * SUCH DAMAGE. | |
| */ |