| /* vi: set sw=4 ts=4: */ |
| /* |
| * loadfont.c - Eugene Crosser & Andries Brouwer |
| * |
| * Version 0.96bb |
| * |
| * Loads the console font, and possibly the corresponding screen map(s). |
| * (Adapted for busybox by Matej Vela.) |
| */ |
| #include "libbb.h" |
| #include <sys/kd.h> |
| |
| enum { |
| PSF_MAGIC1 = 0x36, |
| PSF_MAGIC2 = 0x04, |
| |
| PSF_MODE512 = 0x01, |
| PSF_MODEHASTAB = 0x02, |
| PSF_MAXMODE = 0x03, |
| PSF_SEPARATOR = 0xFFFF |
| }; |
| |
| struct psf_header { |
| unsigned char magic1, magic2; /* Magic number */ |
| unsigned char mode; /* PSF font mode */ |
| unsigned char charsize; /* Character size */ |
| }; |
| |
| #define PSF_MAGIC_OK(x) ((x).magic1 == PSF_MAGIC1 && (x).magic2 == PSF_MAGIC2) |
| |
| static void do_loadfont(int fd, unsigned char *inbuf, int unit, int fontsize) |
| { |
| char *buf; |
| int i; |
| |
| if (unit < 1 || unit > 32) |
| bb_error_msg_and_die("bad character size %d", unit); |
| |
| buf = xzalloc(16 * 1024); |
| /*memset(buf, 0, 16 * 1024);*/ |
| for (i = 0; i < fontsize; i++) |
| memcpy(buf + (32 * i), inbuf + (unit * i), unit); |
| |
| #if defined(PIO_FONTX) && !defined(__sparc__) |
| { |
| struct consolefontdesc cfd; |
| |
| cfd.charcount = fontsize; |
| cfd.charheight = unit; |
| cfd.chardata = buf; |
| |
| if (!ioctl_or_perror(fd, PIO_FONTX, &cfd, "PIO_FONTX ioctl failed (will try PIO_FONT)")) |
| goto ret; /* success */ |
| } |
| #endif |
| xioctl(fd, PIO_FONT, buf); |
| ret: |
| free(buf); |
| } |
| |
| static void |
| do_loadtable(int fd, unsigned char *inbuf, int tailsz, int fontsize) |
| { |
| struct unimapinit advice; |
| struct unimapdesc ud; |
| struct unipair *up; |
| int ct = 0, maxct; |
| int glyph; |
| uint16_t unicode; |
| |
| maxct = tailsz; /* more than enough */ |
| up = xmalloc(maxct * sizeof(struct unipair)); |
| |
| for (glyph = 0; glyph < fontsize; glyph++) { |
| while (tailsz >= 2) { |
| unicode = (((uint16_t) inbuf[1]) << 8) + inbuf[0]; |
| tailsz -= 2; |
| inbuf += 2; |
| if (unicode == PSF_SEPARATOR) |
| break; |
| up[ct].unicode = unicode; |
| up[ct].fontpos = glyph; |
| ct++; |
| } |
| } |
| |
| /* Note: after PIO_UNIMAPCLR and before PIO_UNIMAP |
| this printf did not work on many kernels */ |
| |
| advice.advised_hashsize = 0; |
| advice.advised_hashstep = 0; |
| advice.advised_hashlevel = 0; |
| xioctl(fd, PIO_UNIMAPCLR, &advice); |
| ud.entry_ct = ct; |
| ud.entries = up; |
| xioctl(fd, PIO_UNIMAP, &ud); |
| } |
| |
| static void loadnewfont(int fd) |
| { |
| enum { INBUF_SIZE = 32*1024 + 1 }; |
| |
| int unit; |
| unsigned inputlth, offset; |
| /* Was on stack, but 32k is a bit too much: */ |
| unsigned char *inbuf = xmalloc(INBUF_SIZE); |
| |
| /* |
| * We used to look at the length of the input file |
| * with stat(); now that we accept compressed files, |
| * just read the entire file. |
| */ |
| inputlth = full_read(STDIN_FILENO, inbuf, INBUF_SIZE); |
| if (inputlth < 0) |
| bb_perror_msg_and_die("error reading input font"); |
| if (inputlth >= INBUF_SIZE) |
| bb_error_msg_and_die("font too large"); |
| |
| /* test for psf first */ |
| { |
| struct psf_header psfhdr; |
| int fontsize; |
| int hastable; |
| unsigned head0, head; |
| |
| if (inputlth < sizeof(struct psf_header)) |
| goto no_psf; |
| |
| psfhdr = *(struct psf_header *) &inbuf[0]; |
| |
| if (!PSF_MAGIC_OK(psfhdr)) |
| goto no_psf; |
| |
| if (psfhdr.mode > PSF_MAXMODE) |
| bb_error_msg_and_die("unsupported psf file mode"); |
| fontsize = ((psfhdr.mode & PSF_MODE512) ? 512 : 256); |
| #if !defined(PIO_FONTX) || defined(__sparc__) |
| if (fontsize != 256) |
| bb_error_msg_and_die("only fontsize 256 supported"); |
| #endif |
| hastable = (psfhdr.mode & PSF_MODEHASTAB); |
| unit = psfhdr.charsize; |
| head0 = sizeof(struct psf_header); |
| |
| head = head0 + fontsize * unit; |
| if (head > inputlth || (!hastable && head != inputlth)) |
| bb_error_msg_and_die("input file: bad length"); |
| do_loadfont(fd, inbuf + head0, unit, fontsize); |
| if (hastable) |
| do_loadtable(fd, inbuf + head, inputlth - head, fontsize); |
| return; |
| } |
| |
| no_psf: |
| /* file with three code pages? */ |
| if (inputlth == 9780) { |
| offset = 40; |
| unit = 16; |
| } else { |
| /* bare font */ |
| if (inputlth & 0377) |
| bb_error_msg_and_die("bad input file size"); |
| offset = 0; |
| unit = inputlth / 256; |
| } |
| do_loadfont(fd, inbuf + offset, unit, 256); |
| } |
| |
| int loadfont_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; |
| int loadfont_main(int argc, char **argv) |
| { |
| int fd; |
| |
| if (argc != 1) |
| bb_show_usage(); |
| |
| fd = xopen(CURRENT_VC, O_RDWR); |
| loadnewfont(fd); |
| |
| return EXIT_SUCCESS; |
| } |