| /* |
| * Copyright (C) 2000, Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) |
| * Copyright (C) 2008, BusyBox Team. -solar 4/26/08 |
| * Licensed under GPLv2 or later, see file LICENSE in this source tree. |
| */ |
| //config:config DEVMEM |
| //config: bool "devmem (2.5 kb)" |
| //config: default y |
| //config: help |
| //config: devmem is a small program that reads and writes from physical |
| //config: memory using /dev/mem. |
| |
| //applet:IF_DEVMEM(APPLET(devmem, BB_DIR_SBIN, BB_SUID_DROP)) |
| |
| //kbuild:lib-$(CONFIG_DEVMEM) += devmem.o |
| |
| //usage:#define devmem_trivial_usage |
| //usage: "ADDRESS [WIDTH [VALUE]]" |
| //usage:#define devmem_full_usage "\n\n" |
| //usage: "Read/write from physical address\n" |
| //usage: "\n ADDRESS Address to act upon" |
| //usage: "\n WIDTH Width (8/16/...)" |
| //usage: "\n VALUE Data to be written" |
| |
| #include "libbb.h" |
| |
| int devmem_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; |
| int devmem_main(int argc UNUSED_PARAM, char **argv) |
| { |
| void *map_base, *virt_addr; |
| uint64_t read_result; |
| uint64_t writeval = writeval; /* for compiler */ |
| off_t target; |
| unsigned page_size, mapped_size, offset_in_page; |
| int fd; |
| unsigned width = 8 * sizeof(int); |
| |
| /* devmem ADDRESS [WIDTH [VALUE]] */ |
| // TODO: options? |
| // -r: read and output only the value in hex, with 0x prefix |
| // -w: write only, no reads before or after, and no output |
| // or make this behavior default? |
| // Let's try this and see how users react. |
| |
| /* ADDRESS */ |
| if (!argv[1]) |
| bb_show_usage(); |
| errno = 0; |
| target = bb_strtoull(argv[1], NULL, 0); /* allows hex, oct etc */ |
| |
| /* WIDTH */ |
| if (argv[2]) { |
| if (isdigit(argv[2][0]) || argv[2][1]) |
| width = xatou(argv[2]); |
| else { |
| static const char bhwl[] ALIGN1 = "bhwl"; |
| static const uint8_t sizes[] ALIGN1 = { |
| 8 * sizeof(char), |
| 8 * sizeof(short), |
| 8 * sizeof(int), |
| 8 * sizeof(long), |
| 0 /* bad */ |
| }; |
| width = strchrnul(bhwl, (argv[2][0] | 0x20)) - bhwl; |
| width = sizes[width]; |
| } |
| /* VALUE */ |
| if (argv[3]) |
| writeval = bb_strtoull(argv[3], NULL, 0); |
| } else { /* argv[2] == NULL */ |
| /* make argv[3] to be a valid thing to fetch */ |
| argv--; |
| } |
| if (errno) |
| bb_show_usage(); /* one of bb_strtouXX failed */ |
| |
| fd = xopen("/dev/mem", argv[3] ? (O_RDWR | O_SYNC) : (O_RDONLY | O_SYNC)); |
| mapped_size = page_size = getpagesize(); |
| offset_in_page = (unsigned)target & (page_size - 1); |
| if (offset_in_page + width > page_size) { |
| /* This access spans pages. |
| * Must map two pages to make it possible: */ |
| mapped_size *= 2; |
| } |
| map_base = mmap(NULL, |
| mapped_size, |
| argv[3] ? (PROT_READ | PROT_WRITE) : PROT_READ, |
| MAP_SHARED, |
| fd, |
| target & ~(off_t)(page_size - 1)); |
| if (map_base == MAP_FAILED) |
| bb_simple_perror_msg_and_die("mmap"); |
| |
| // printf("Memory mapped at address %p.\n", map_base); |
| |
| virt_addr = (char*)map_base + offset_in_page; |
| |
| if (!argv[3]) { |
| switch (width) { |
| case 8: |
| read_result = *(volatile uint8_t*)virt_addr; |
| break; |
| case 16: |
| read_result = *(volatile uint16_t*)virt_addr; |
| break; |
| case 32: |
| read_result = *(volatile uint32_t*)virt_addr; |
| break; |
| case 64: |
| read_result = *(volatile uint64_t*)virt_addr; |
| break; |
| default: |
| bb_simple_error_msg_and_die("bad width"); |
| } |
| // printf("Value at address 0x%"OFF_FMT"X (%p): 0x%llX\n", |
| // target, virt_addr, |
| // (unsigned long long)read_result); |
| /* Zero-padded output shows the width of access just done */ |
| printf("0x%0*llX\n", (width >> 2), (unsigned long long)read_result); |
| } else { |
| switch (width) { |
| case 8: |
| *(volatile uint8_t*)virt_addr = writeval; |
| // read_result = *(volatile uint8_t*)virt_addr; |
| break; |
| case 16: |
| *(volatile uint16_t*)virt_addr = writeval; |
| // read_result = *(volatile uint16_t*)virt_addr; |
| break; |
| case 32: |
| *(volatile uint32_t*)virt_addr = writeval; |
| // read_result = *(volatile uint32_t*)virt_addr; |
| break; |
| case 64: |
| *(volatile uint64_t*)virt_addr = writeval; |
| // read_result = *(volatile uint64_t*)virt_addr; |
| break; |
| default: |
| bb_simple_error_msg_and_die("bad width"); |
| } |
| // printf("Written 0x%llX; readback 0x%llX\n", |
| // (unsigned long long)writeval, |
| // (unsigned long long)read_result); |
| } |
| |
| if (ENABLE_FEATURE_CLEAN_UP) { |
| if (munmap(map_base, mapped_size) == -1) |
| bb_simple_perror_msg_and_die("munmap"); |
| close(fd); |
| } |
| |
| return EXIT_SUCCESS; |
| } |