| /* vi: set sw=4 ts=4: */ |
| /* stty -- change and print terminal line settings |
| Copyright (C) 1990-1999 Free Software Foundation, Inc. |
| |
| Licensed under the GPL v2 or later, see the file LICENSE in this tarball. |
| */ |
| /* Usage: stty [-ag] [-F device] [setting...] |
| |
| Options: |
| -a Write all current settings to stdout in human-readable form. |
| -g Write all current settings to stdout in stty-readable form. |
| -F Open and use the specified device instead of stdin |
| |
| If no args are given, write to stdout the baud rate and settings that |
| have been changed from their defaults. Mode reading and changes |
| are done on the specified device, or stdin if none was specified. |
| |
| David MacKenzie <djm@gnu.ai.mit.edu> |
| |
| Special for busybox ported by Vladimir Oleynik <dzo@simtreas.ru> 2001 |
| |
| */ |
| |
| #include "busybox.h" |
| |
| #ifndef _POSIX_VDISABLE |
| # define _POSIX_VDISABLE ((unsigned char) 0) |
| #endif |
| |
| #define Control(c) ((c) & 0x1f) |
| /* Canonical values for control characters */ |
| #ifndef CINTR |
| # define CINTR Control('c') |
| #endif |
| #ifndef CQUIT |
| # define CQUIT 28 |
| #endif |
| #ifndef CERASE |
| # define CERASE 127 |
| #endif |
| #ifndef CKILL |
| # define CKILL Control('u') |
| #endif |
| #ifndef CEOF |
| # define CEOF Control('d') |
| #endif |
| #ifndef CEOL |
| # define CEOL _POSIX_VDISABLE |
| #endif |
| #ifndef CSTART |
| # define CSTART Control('q') |
| #endif |
| #ifndef CSTOP |
| # define CSTOP Control('s') |
| #endif |
| #ifndef CSUSP |
| # define CSUSP Control('z') |
| #endif |
| #if defined(VEOL2) && !defined(CEOL2) |
| # define CEOL2 _POSIX_VDISABLE |
| #endif |
| /* ISC renamed swtch to susp for termios, but we'll accept either name */ |
| #if defined(VSUSP) && !defined(VSWTCH) |
| # define VSWTCH VSUSP |
| # define CSWTCH CSUSP |
| #endif |
| #if defined(VSWTCH) && !defined(CSWTCH) |
| # define CSWTCH _POSIX_VDISABLE |
| #endif |
| |
| /* SunOS 5.3 loses (^Z doesn't work) if 'swtch' is the same as 'susp'. |
| So the default is to disable 'swtch.' */ |
| #if defined (__sparc__) && defined (__svr4__) |
| # undef CSWTCH |
| # define CSWTCH _POSIX_VDISABLE |
| #endif |
| |
| #if defined(VWERSE) && !defined (VWERASE) /* AIX-3.2.5 */ |
| # define VWERASE VWERSE |
| #endif |
| #if defined(VDSUSP) && !defined (CDSUSP) |
| # define CDSUSP Control('y') |
| #endif |
| #if !defined(VREPRINT) && defined(VRPRNT) /* Irix 4.0.5 */ |
| # define VREPRINT VRPRNT |
| #endif |
| #if defined(VREPRINT) && !defined(CRPRNT) |
| # define CRPRNT Control('r') |
| #endif |
| #if defined(VWERASE) && !defined(CWERASE) |
| # define CWERASE Control('w') |
| #endif |
| #if defined(VLNEXT) && !defined(CLNEXT) |
| # define CLNEXT Control('v') |
| #endif |
| #if defined(VDISCARD) && !defined(VFLUSHO) |
| # define VFLUSHO VDISCARD |
| #endif |
| #if defined(VFLUSH) && !defined(VFLUSHO) /* Ultrix 4.2 */ |
| # define VFLUSHO VFLUSH |
| #endif |
| #if defined(CTLECH) && !defined(ECHOCTL) /* Ultrix 4.3 */ |
| # define ECHOCTL CTLECH |
| #endif |
| #if defined(TCTLECH) && !defined(ECHOCTL) /* Ultrix 4.2 */ |
| # define ECHOCTL TCTLECH |
| #endif |
| #if defined(CRTKIL) && !defined(ECHOKE) /* Ultrix 4.2 and 4.3 */ |
| # define ECHOKE CRTKIL |
| #endif |
| #if defined(VFLUSHO) && !defined(CFLUSHO) |
| # define CFLUSHO Control('o') |
| #endif |
| #if defined(VSTATUS) && !defined(CSTATUS) |
| # define CSTATUS Control('t') |
| #endif |
| |
| /* Which speeds to set */ |
| enum speed_setting { |
| input_speed, output_speed, both_speeds |
| }; |
| |
| /* Which member(s) of 'struct termios' a mode uses */ |
| enum { |
| /* Do NOT change the order or values, as mode_type_flag() |
| * depends on them */ |
| control, input, output, local, combination |
| }; |
| |
| static const char evenp [] = "evenp"; |
| static const char raw [] = "raw"; |
| static const char stty_min [] = "min"; |
| static const char stty_time [] = "time"; |
| static const char stty_swtch[] = "swtch"; |
| static const char stty_eol [] = "eol"; |
| static const char stty_eof [] = "eof"; |
| static const char parity [] = "parity"; |
| static const char stty_oddp [] = "oddp"; |
| static const char stty_nl [] = "nl"; |
| static const char stty_ek [] = "ek"; |
| static const char stty_sane [] = "sane"; |
| static const char cbreak [] = "cbreak"; |
| static const char stty_pass8[] = "pass8"; |
| static const char litout [] = "litout"; |
| static const char cooked [] = "cooked"; |
| static const char decctlq [] = "decctlq"; |
| static const char stty_tabs [] = "tabs"; |
| static const char stty_lcase[] = "lcase"; |
| static const char stty_LCASE[] = "LCASE"; |
| static const char stty_crt [] = "crt"; |
| static const char stty_dec [] = "dec"; |
| |
| /* Flags for 'struct mode_info' */ |
| #define SANE_SET 1 /* Set in 'sane' mode */ |
| #define SANE_UNSET 2 /* Unset in 'sane' mode */ |
| #define REV 4 /* Can be turned off by prepending '-' */ |
| #define OMIT 8 /* Don't display value */ |
| |
| /* Each mode */ |
| struct mode_info { |
| const char * const name; /* Name given on command line */ |
| const unsigned char type; /* Which structure element to change */ |
| const unsigned char flags; /* Setting and display options */ |
| /* were using short here, but ppc32 was unhappy: */ |
| const tcflag_t mask; /* Other bits to turn off for this mode */ |
| const tcflag_t bits; /* Bits to set for this mode */ |
| }; |
| |
| /* We can optimize it further by using name[8] instead of char *name */ |
| /* but beware of "if (info->name == evenp)" checks! */ |
| /* Need to replace them with "if (info == &mode_info[EVENP_INDX])" */ |
| |
| #define MI_ENTRY(N,T,F,B,M) { N, T, F, M, B } |
| |
| static const struct mode_info mode_info[] = { |
| MI_ENTRY("parenb", control, REV, PARENB, 0 ), |
| MI_ENTRY("parodd", control, REV, PARODD, 0 ), |
| MI_ENTRY("cs5", control, 0, CS5, CSIZE), |
| MI_ENTRY("cs6", control, 0, CS6, CSIZE), |
| MI_ENTRY("cs7", control, 0, CS7, CSIZE), |
| MI_ENTRY("cs8", control, 0, CS8, CSIZE), |
| MI_ENTRY("hupcl", control, REV, HUPCL, 0 ), |
| MI_ENTRY("hup", control, REV | OMIT, HUPCL, 0 ), |
| MI_ENTRY("cstopb", control, REV, CSTOPB, 0 ), |
| MI_ENTRY("cread", control, SANE_SET | REV, CREAD, 0 ), |
| MI_ENTRY("clocal", control, REV, CLOCAL, 0 ), |
| #ifdef CRTSCTS |
| MI_ENTRY("crtscts", control, REV, CRTSCTS, 0 ), |
| #endif |
| MI_ENTRY("ignbrk", input, SANE_UNSET | REV, IGNBRK, 0 ), |
| MI_ENTRY("brkint", input, SANE_SET | REV, BRKINT, 0 ), |
| MI_ENTRY("ignpar", input, REV, IGNPAR, 0 ), |
| MI_ENTRY("parmrk", input, REV, PARMRK, 0 ), |
| MI_ENTRY("inpck", input, REV, INPCK, 0 ), |
| MI_ENTRY("istrip", input, REV, ISTRIP, 0 ), |
| MI_ENTRY("inlcr", input, SANE_UNSET | REV, INLCR, 0 ), |
| MI_ENTRY("igncr", input, SANE_UNSET | REV, IGNCR, 0 ), |
| MI_ENTRY("icrnl", input, SANE_SET | REV, ICRNL, 0 ), |
| MI_ENTRY("ixon", input, REV, IXON, 0 ), |
| MI_ENTRY("ixoff", input, SANE_UNSET | REV, IXOFF, 0 ), |
| MI_ENTRY("tandem", input, REV | OMIT, IXOFF, 0 ), |
| #ifdef IUCLC |
| MI_ENTRY("iuclc", input, SANE_UNSET | REV, IUCLC, 0 ), |
| #endif |
| #ifdef IXANY |
| MI_ENTRY("ixany", input, SANE_UNSET | REV, IXANY, 0 ), |
| #endif |
| #ifdef IMAXBEL |
| MI_ENTRY("imaxbel", input, SANE_SET | REV, IMAXBEL, 0 ), |
| #endif |
| MI_ENTRY("opost", output, SANE_SET | REV, OPOST, 0 ), |
| #ifdef OLCUC |
| MI_ENTRY("olcuc", output, SANE_UNSET | REV, OLCUC, 0 ), |
| #endif |
| #ifdef OCRNL |
| MI_ENTRY("ocrnl", output, SANE_UNSET | REV, OCRNL, 0 ), |
| #endif |
| #ifdef ONLCR |
| MI_ENTRY("onlcr", output, SANE_SET | REV, ONLCR, 0 ), |
| #endif |
| #ifdef ONOCR |
| MI_ENTRY("onocr", output, SANE_UNSET | REV, ONOCR, 0 ), |
| #endif |
| #ifdef ONLRET |
| MI_ENTRY("onlret", output, SANE_UNSET | REV, ONLRET, 0 ), |
| #endif |
| #ifdef OFILL |
| MI_ENTRY("ofill", output, SANE_UNSET | REV, OFILL, 0 ), |
| #endif |
| #ifdef OFDEL |
| MI_ENTRY("ofdel", output, SANE_UNSET | REV, OFDEL, 0 ), |
| #endif |
| #ifdef NLDLY |
| MI_ENTRY("nl1", output, SANE_UNSET, NL1, NLDLY), |
| MI_ENTRY("nl0", output, SANE_SET, NL0, NLDLY), |
| #endif |
| #ifdef CRDLY |
| MI_ENTRY("cr3", output, SANE_UNSET, CR3, CRDLY), |
| MI_ENTRY("cr2", output, SANE_UNSET, CR2, CRDLY), |
| MI_ENTRY("cr1", output, SANE_UNSET, CR1, CRDLY), |
| MI_ENTRY("cr0", output, SANE_SET, CR0, CRDLY), |
| #endif |
| |
| #ifdef TABDLY |
| MI_ENTRY("tab3", output, SANE_UNSET, TAB3, TABDLY), |
| MI_ENTRY("tab2", output, SANE_UNSET, TAB2, TABDLY), |
| MI_ENTRY("tab1", output, SANE_UNSET, TAB1, TABDLY), |
| MI_ENTRY("tab0", output, SANE_SET, TAB0, TABDLY), |
| #else |
| # ifdef OXTABS |
| MI_ENTRY("tab3", output, SANE_UNSET, OXTABS, 0 ), |
| # endif |
| #endif |
| |
| #ifdef BSDLY |
| MI_ENTRY("bs1", output, SANE_UNSET, BS1, BSDLY), |
| MI_ENTRY("bs0", output, SANE_SET, BS0, BSDLY), |
| #endif |
| #ifdef VTDLY |
| MI_ENTRY("vt1", output, SANE_UNSET, VT1, VTDLY), |
| MI_ENTRY("vt0", output, SANE_SET, VT0, VTDLY), |
| #endif |
| #ifdef FFDLY |
| MI_ENTRY("ff1", output, SANE_UNSET, FF1, FFDLY), |
| MI_ENTRY("ff0", output, SANE_SET, FF0, FFDLY), |
| #endif |
| MI_ENTRY("isig", local, SANE_SET | REV, ISIG, 0 ), |
| MI_ENTRY("icanon", local, SANE_SET | REV, ICANON, 0 ), |
| #ifdef IEXTEN |
| MI_ENTRY("iexten", local, SANE_SET | REV, IEXTEN, 0 ), |
| #endif |
| MI_ENTRY("echo", local, SANE_SET | REV, ECHO, 0 ), |
| MI_ENTRY("echoe", local, SANE_SET | REV, ECHOE, 0 ), |
| MI_ENTRY("crterase", local, REV | OMIT, ECHOE, 0 ), |
| MI_ENTRY("echok", local, SANE_SET | REV, ECHOK, 0 ), |
| MI_ENTRY("echonl", local, SANE_UNSET | REV, ECHONL, 0 ), |
| MI_ENTRY("noflsh", local, SANE_UNSET | REV, NOFLSH, 0 ), |
| #ifdef XCASE |
| MI_ENTRY("xcase", local, SANE_UNSET | REV, XCASE, 0 ), |
| #endif |
| #ifdef TOSTOP |
| MI_ENTRY("tostop", local, SANE_UNSET | REV, TOSTOP, 0 ), |
| #endif |
| #ifdef ECHOPRT |
| MI_ENTRY("echoprt", local, SANE_UNSET | REV, ECHOPRT, 0 ), |
| MI_ENTRY("prterase", local, REV | OMIT, ECHOPRT, 0 ), |
| #endif |
| #ifdef ECHOCTL |
| MI_ENTRY("echoctl", local, SANE_SET | REV, ECHOCTL, 0 ), |
| MI_ENTRY("ctlecho", local, REV | OMIT, ECHOCTL, 0 ), |
| #endif |
| #ifdef ECHOKE |
| MI_ENTRY("echoke", local, SANE_SET | REV, ECHOKE, 0 ), |
| MI_ENTRY("crtkill", local, REV | OMIT, ECHOKE, 0 ), |
| #endif |
| MI_ENTRY(evenp, combination, REV | OMIT, 0, 0 ), |
| MI_ENTRY(parity, combination, REV | OMIT, 0, 0 ), |
| MI_ENTRY(stty_oddp, combination, REV | OMIT, 0, 0 ), |
| MI_ENTRY(stty_nl, combination, REV | OMIT, 0, 0 ), |
| MI_ENTRY(stty_ek, combination, OMIT, 0, 0 ), |
| MI_ENTRY(stty_sane, combination, OMIT, 0, 0 ), |
| MI_ENTRY(cooked, combination, REV | OMIT, 0, 0 ), |
| MI_ENTRY(raw, combination, REV | OMIT, 0, 0 ), |
| MI_ENTRY(stty_pass8, combination, REV | OMIT, 0, 0 ), |
| MI_ENTRY(litout, combination, REV | OMIT, 0, 0 ), |
| MI_ENTRY(cbreak, combination, REV | OMIT, 0, 0 ), |
| #ifdef IXANY |
| MI_ENTRY(decctlq, combination, REV | OMIT, 0, 0 ), |
| #endif |
| #if defined(TABDLY) || defined(OXTABS) |
| MI_ENTRY(stty_tabs, combination, REV | OMIT, 0, 0 ), |
| #endif |
| #if defined(XCASE) && defined(IUCLC) && defined(OLCUC) |
| MI_ENTRY(stty_lcase, combination, REV | OMIT, 0, 0 ), |
| MI_ENTRY(stty_LCASE, combination, REV | OMIT, 0, 0 ), |
| #endif |
| MI_ENTRY(stty_crt, combination, OMIT, 0, 0 ), |
| MI_ENTRY(stty_dec, combination, OMIT, 0, 0 ), |
| }; |
| |
| enum { |
| NUM_mode_info = (sizeof(mode_info) / sizeof(mode_info[0])) |
| }; |
| |
| /* Control character settings */ |
| struct control_info { |
| const char * const name; /* Name given on command line */ |
| const unsigned char saneval; /* Value to set for 'stty sane' */ |
| const unsigned char offset; /* Offset in c_cc */ |
| }; |
| |
| /* Control characters */ |
| |
| static const struct control_info control_info[] = { |
| {"intr", CINTR, VINTR}, |
| {"quit", CQUIT, VQUIT}, |
| {"erase", CERASE, VERASE}, |
| {"kill", CKILL, VKILL}, |
| {stty_eof, CEOF, VEOF}, |
| {stty_eol, CEOL, VEOL}, |
| #ifdef VEOL2 |
| {"eol2", CEOL2, VEOL2}, |
| #endif |
| #ifdef VSWTCH |
| {stty_swtch, CSWTCH, VSWTCH}, |
| #endif |
| {"start", CSTART, VSTART}, |
| {"stop", CSTOP, VSTOP}, |
| {"susp", CSUSP, VSUSP}, |
| #ifdef VDSUSP |
| {"dsusp", CDSUSP, VDSUSP}, |
| #endif |
| #ifdef VREPRINT |
| {"rprnt", CRPRNT, VREPRINT}, |
| #endif |
| #ifdef VWERASE |
| {"werase", CWERASE, VWERASE}, |
| #endif |
| #ifdef VLNEXT |
| {"lnext", CLNEXT, VLNEXT}, |
| #endif |
| #ifdef VFLUSHO |
| {"flush", CFLUSHO, VFLUSHO}, |
| #endif |
| #ifdef VSTATUS |
| {"status", CSTATUS, VSTATUS}, |
| #endif |
| /* These must be last because of the display routines */ |
| {stty_min, 1, VMIN}, |
| {stty_time, 0, VTIME}, |
| }; |
| |
| enum { |
| NUM_control_info = (sizeof(control_info) / sizeof(control_info[0])) |
| }; |
| |
| /* The width of the screen, for output wrapping */ |
| static unsigned max_col = 80; /* default */ |
| /* Current position, to know when to wrap */ |
| static unsigned current_col; |
| static const char *device_name = bb_msg_standard_input; |
| |
| /* Return a string that is the printable representation of character CH */ |
| /* Adapted from 'cat' by Torbjorn Granlund */ |
| static const char *visible(unsigned int ch) |
| { |
| static char buf[10]; |
| char *bpout = buf; |
| |
| if (ch == _POSIX_VDISABLE) |
| return "<undef>"; |
| |
| if (ch >= 128) { |
| ch -= 128; |
| *bpout++ = 'M'; |
| *bpout++ = '-'; |
| } |
| |
| if (ch < 32) { |
| *bpout++ = '^'; |
| *bpout++ = ch + 64; |
| } else if (ch < 127) { |
| *bpout++ = ch; |
| } else { |
| *bpout++ = '^'; |
| *bpout++ = '?'; |
| } |
| |
| *bpout = '\0'; |
| return buf; |
| } |
| |
| static tcflag_t *mode_type_flag(unsigned type, const struct termios *mode) |
| { |
| static const unsigned char tcflag_offsets[] = { |
| offsetof(struct termios, c_cflag), /* control */ |
| offsetof(struct termios, c_iflag), /* input */ |
| offsetof(struct termios, c_oflag), /* output */ |
| offsetof(struct termios, c_lflag), /* local */ |
| }; |
| |
| if (type <= local) { |
| return (tcflag_t*) (((char*)mode) + tcflag_offsets[type]); |
| } |
| return NULL; |
| } |
| |
| static void set_speed_or_die(enum speed_setting type, const char * const arg, |
| struct termios * const mode) |
| { |
| speed_t baud; |
| |
| baud = tty_value_to_baud(xatou(arg)); |
| |
| if (type != output_speed) { /* either input or both */ |
| cfsetispeed(mode, baud); |
| } |
| if (type != input_speed) { /* either output or both */ |
| cfsetospeed(mode, baud); |
| } |
| } |
| |
| static ATTRIBUTE_NORETURN void perror_on_device_and_die(const char *fmt) |
| { |
| bb_perror_msg_and_die(fmt, device_name); |
| } |
| |
| static void perror_on_device(const char *fmt) |
| { |
| bb_perror_msg(fmt, device_name); |
| } |
| |
| /* Print format string MESSAGE and optional args. |
| Wrap to next line first if it won't fit. |
| Print a space first unless MESSAGE will start a new line */ |
| static void wrapf(const char *message, ...) |
| { |
| char buf[128]; |
| va_list args; |
| int buflen; |
| |
| va_start(args, message); |
| buflen = vsnprintf(buf, sizeof(buf), message, args); |
| va_end(args); |
| /* We seem to be called only with suitable lengths, but check if |
| somebody failed to adhere to this assumption just to be sure. */ |
| if (!buflen || buflen >= sizeof(buf)) return; |
| |
| if (current_col > 0) { |
| current_col++; |
| if (buf[0] != '\n') { |
| if (current_col + buflen >= max_col) { |
| putchar('\n'); |
| current_col = 0; |
| } else |
| putchar(' '); |
| } |
| } |
| fputs(buf, stdout); |
| current_col += buflen; |
| if (buf[buflen-1] == '\n') |
| current_col = 0; |
| } |
| |
| static void set_window_size(const int rows, const int cols) |
| { |
| struct winsize win = { 0, 0, 0, 0}; |
| |
| if (ioctl(STDIN_FILENO, TIOCGWINSZ, &win)) { |
| if (errno != EINVAL) { |
| goto bail; |
| } |
| memset(&win, 0, sizeof(win)); |
| } |
| |
| if (rows >= 0) |
| win.ws_row = rows; |
| if (cols >= 0) |
| win.ws_col = cols; |
| |
| if (ioctl(STDIN_FILENO, TIOCSWINSZ, (char *) &win)) |
| bail: |
| perror_on_device("%s"); |
| } |
| |
| static void display_window_size(const int fancy) |
| { |
| const char *fmt_str = "%s\0%s: no size information for this device"; |
| unsigned width, height; |
| |
| if (get_terminal_width_height(STDIN_FILENO, &width, &height)) { |
| if ((errno != EINVAL) || ((fmt_str += 2), !fancy)) { |
| perror_on_device(fmt_str); |
| } |
| } else { |
| wrapf(fancy ? "rows %d; columns %d;" : "%d %d\n", |
| height, width); |
| } |
| } |
| |
| static const struct suffix_mult stty_suffixes[] = { |
| {"b", 512 }, |
| {"k", 1024}, |
| {"B", 1024}, |
| {NULL, 0 } |
| }; |
| |
| static const struct mode_info *find_mode(const char *name) |
| { |
| int i; |
| for (i = 0; i < NUM_mode_info; ++i) |
| if (!strcmp(name, mode_info[i].name)) |
| return &mode_info[i]; |
| return 0; |
| } |
| |
| static const struct control_info *find_control(const char *name) |
| { |
| int i; |
| for (i = 0; i < NUM_control_info; ++i) |
| if (!strcmp(name, control_info[i].name)) |
| return &control_info[i]; |
| return 0; |
| } |
| |
| enum { |
| param_need_arg = 0x80, |
| param_line = 1 | 0x80, |
| param_rows = 2 | 0x80, |
| param_cols = 3 | 0x80, |
| param_size = 4, |
| param_speed = 5, |
| param_ispeed = 6 | 0x80, |
| param_ospeed = 7 | 0x80, |
| }; |
| |
| static int find_param(const char * const name) |
| { |
| const char * const params[] = { |
| "line", |
| "rows", |
| "cols", |
| "columns", |
| "size", |
| "speed", |
| "ispeed", |
| "ospeed", |
| NULL |
| }; |
| int i = index_in_str_array(params, name); |
| if (i < 0) |
| return 0; |
| if (!(i == 4 || i == 5)) |
| i |= 0x80; |
| |
| return i; |
| } |
| |
| static int recover_mode(const char *arg, struct termios *mode) |
| { |
| int i, n; |
| unsigned int chr; |
| unsigned long iflag, oflag, cflag, lflag; |
| |
| /* Scan into temporaries since it is too much trouble to figure out |
| the right format for 'tcflag_t' */ |
| if (sscanf(arg, "%lx:%lx:%lx:%lx%n", |
| &iflag, &oflag, &cflag, &lflag, &n) != 4) |
| return 0; |
| mode->c_iflag = iflag; |
| mode->c_oflag = oflag; |
| mode->c_cflag = cflag; |
| mode->c_lflag = lflag; |
| arg += n; |
| for (i = 0; i < NCCS; ++i) { |
| if (sscanf(arg, ":%x%n", &chr, &n) != 1) |
| return 0; |
| mode->c_cc[i] = chr; |
| arg += n; |
| } |
| |
| /* Fail if there are too many fields */ |
| if (*arg != '\0') |
| return 0; |
| |
| return 1; |
| } |
| |
| static void display_recoverable(const struct termios *mode, |
| const int ATTRIBUTE_UNUSED dummy) |
| { |
| int i; |
| printf("%lx:%lx:%lx:%lx", |
| (unsigned long) mode->c_iflag, (unsigned long) mode->c_oflag, |
| (unsigned long) mode->c_cflag, (unsigned long) mode->c_lflag); |
| for (i = 0; i < NCCS; ++i) |
| printf(":%x", (unsigned int) mode->c_cc[i]); |
| putchar('\n'); |
| } |
| |
| static void display_speed(const struct termios *mode, int fancy) |
| { |
| //01234567 8 9 |
| const char *fmt_str = "%lu %lu\n\0ispeed %lu baud; ospeed %lu baud;"; |
| unsigned long ispeed, ospeed; |
| |
| ospeed = ispeed = cfgetispeed(mode); |
| if (ispeed == 0 || ispeed == (ospeed = cfgetospeed(mode))) { |
| ispeed = ospeed; /* in case ispeed was 0 */ |
| //0123 4 5 6 7 8 9 |
| fmt_str = "%lu\n\0\0\0\0\0speed %lu baud;"; |
| } |
| if (fancy) fmt_str += 9; |
| wrapf(fmt_str, tty_baud_to_value(ispeed), tty_baud_to_value(ospeed)); |
| } |
| |
| static void do_display(const struct termios *mode, const int all) |
| { |
| int i; |
| tcflag_t *bitsp; |
| unsigned long mask; |
| int prev_type = control; |
| |
| display_speed(mode, 1); |
| if (all) |
| display_window_size(1); |
| #ifdef HAVE_C_LINE |
| wrapf("line = %d;\n", mode->c_line); |
| #else |
| wrapf("\n"); |
| #endif |
| |
| for (i = 0; control_info[i].name != stty_min; ++i) { |
| /* If swtch is the same as susp, don't print both */ |
| #if VSWTCH == VSUSP |
| if (control_info[i].name == stty_swtch) |
| continue; |
| #endif |
| /* If eof uses the same slot as min, only print whichever applies */ |
| #if VEOF == VMIN |
| if ((mode->c_lflag & ICANON) == 0 |
| && (control_info[i].name == stty_eof |
| || control_info[i].name == stty_eol)) continue; |
| #endif |
| wrapf("%s = %s;", control_info[i].name, |
| visible(mode->c_cc[control_info[i].offset])); |
| } |
| #if VEOF == VMIN |
| if ((mode->c_lflag & ICANON) == 0) |
| #endif |
| wrapf("min = %d; time = %d;", mode->c_cc[VMIN], mode->c_cc[VTIME]); |
| if (current_col) wrapf("\n"); |
| |
| for (i = 0; i < NUM_mode_info; ++i) { |
| if (mode_info[i].flags & OMIT) |
| continue; |
| if (mode_info[i].type != prev_type) { |
| /* wrapf("\n"); */ |
| if (current_col) wrapf("\n"); |
| prev_type = mode_info[i].type; |
| } |
| |
| bitsp = mode_type_flag(mode_info[i].type, mode); |
| mask = mode_info[i].mask ? mode_info[i].mask : mode_info[i].bits; |
| if ((*bitsp & mask) == mode_info[i].bits) { |
| if (all || (mode_info[i].flags & SANE_UNSET)) |
| wrapf("%s", mode_info[i].name); |
| } else { |
| if ((all && mode_info[i].flags & REV) || |
| (!all && |
| (mode_info[i].flags & (SANE_SET | REV)) == (SANE_SET | REV))) |
| wrapf("-%s", mode_info[i].name); |
| } |
| } |
| if (current_col) wrapf("\n"); |
| } |
| |
| static void sane_mode(struct termios *mode) |
| { |
| int i; |
| tcflag_t *bitsp; |
| |
| for (i = 0; i < NUM_control_info; ++i) { |
| #if VMIN == VEOF |
| if (control_info[i].name == stty_min) |
| break; |
| #endif |
| mode->c_cc[control_info[i].offset] = control_info[i].saneval; |
| } |
| |
| for (i = 0; i < NUM_mode_info; ++i) { |
| if (mode_info[i].flags & SANE_SET) { |
| bitsp = mode_type_flag(mode_info[i].type, mode); |
| *bitsp = (*bitsp & ~((unsigned long)mode_info[i].mask)) |
| | mode_info[i].bits; |
| } else if (mode_info[i].flags & SANE_UNSET) { |
| bitsp = mode_type_flag(mode_info[i].type, mode); |
| *bitsp = *bitsp & ~((unsigned long)mode_info[i].mask) |
| & ~mode_info[i].bits; |
| } |
| } |
| } |
| |
| /* Save set_mode from #ifdef forest plague */ |
| #ifndef ONLCR |
| #define ONLCR 0 |
| #endif |
| #ifndef OCRNL |
| #define OCRNL 0 |
| #endif |
| #ifndef ONLRET |
| #define ONLRET 0 |
| #endif |
| #ifndef XCASE |
| #define XCASE 0 |
| #endif |
| #ifndef IXANY |
| #define IXANY 0 |
| #endif |
| #ifndef TABDLY |
| #define TABDLY 0 |
| #endif |
| #ifndef OXTABS |
| #define OXTABS 0 |
| #endif |
| #ifndef IUCLC |
| #define IUCLC 0 |
| #endif |
| #ifndef OLCUC |
| #define OLCUC 0 |
| #endif |
| #ifndef ECHOCTL |
| #define ECHOCTL 0 |
| #endif |
| #ifndef ECHOKE |
| #define ECHOKE 0 |
| #endif |
| |
| static void set_mode(const struct mode_info *info, int reversed, |
| struct termios *mode) |
| { |
| tcflag_t *bitsp; |
| |
| bitsp = mode_type_flag(info->type, mode); |
| |
| if (bitsp) { |
| if (reversed) |
| *bitsp = *bitsp & ~info->mask & ~info->bits; |
| else |
| *bitsp = (*bitsp & ~info->mask) | info->bits; |
| return; |
| } |
| |
| /* Combination mode */ |
| if (info->name == evenp || info->name == parity) { |
| if (reversed) |
| mode->c_cflag = (mode->c_cflag & ~PARENB & ~CSIZE) | CS8; |
| else |
| mode->c_cflag = (mode->c_cflag & ~PARODD & ~CSIZE) | PARENB | CS7; |
| } else if (info->name == stty_oddp) { |
| if (reversed) |
| mode->c_cflag = (mode->c_cflag & ~PARENB & ~CSIZE) | CS8; |
| else |
| mode->c_cflag = (mode->c_cflag & ~CSIZE) | CS7 | PARODD | PARENB; |
| } else if (info->name == stty_nl) { |
| if (reversed) { |
| mode->c_iflag = (mode->c_iflag | ICRNL) & ~INLCR & ~IGNCR; |
| mode->c_oflag = (mode->c_oflag | ONLCR) & ~OCRNL & ~ONLRET; |
| } else { |
| mode->c_iflag = mode->c_iflag & ~ICRNL; |
| if (ONLCR) mode->c_oflag = mode->c_oflag & ~ONLCR; |
| } |
| } else if (info->name == stty_ek) { |
| mode->c_cc[VERASE] = CERASE; |
| mode->c_cc[VKILL] = CKILL; |
| } else if (info->name == stty_sane) { |
| sane_mode(mode); |
| } |
| else if (info->name == cbreak) { |
| if (reversed) |
| mode->c_lflag |= ICANON; |
| else |
| mode->c_lflag &= ~ICANON; |
| } else if (info->name == stty_pass8) { |
| if (reversed) { |
| mode->c_cflag = (mode->c_cflag & ~CSIZE) | CS7 | PARENB; |
| mode->c_iflag |= ISTRIP; |
| } else { |
| mode->c_cflag = (mode->c_cflag & ~PARENB & ~CSIZE) | CS8; |
| mode->c_iflag &= ~ISTRIP; |
| } |
| } else if (info->name == litout) { |
| if (reversed) { |
| mode->c_cflag = (mode->c_cflag & ~CSIZE) | CS7 | PARENB; |
| mode->c_iflag |= ISTRIP; |
| mode->c_oflag |= OPOST; |
| } else { |
| mode->c_cflag = (mode->c_cflag & ~PARENB & ~CSIZE) | CS8; |
| mode->c_iflag &= ~ISTRIP; |
| mode->c_oflag &= ~OPOST; |
| } |
| } else if (info->name == raw || info->name == cooked) { |
| if ((info->name[0] == 'r' && reversed) |
| || (info->name[0] == 'c' && !reversed)) { |
| /* Cooked mode */ |
| mode->c_iflag |= BRKINT | IGNPAR | ISTRIP | ICRNL | IXON; |
| mode->c_oflag |= OPOST; |
| mode->c_lflag |= ISIG | ICANON; |
| #if VMIN == VEOF |
| mode->c_cc[VEOF] = CEOF; |
| #endif |
| #if VTIME == VEOL |
| mode->c_cc[VEOL] = CEOL; |
| #endif |
| } else { |
| /* Raw mode */ |
| mode->c_iflag = 0; |
| mode->c_oflag &= ~OPOST; |
| mode->c_lflag &= ~(ISIG | ICANON | XCASE); |
| mode->c_cc[VMIN] = 1; |
| mode->c_cc[VTIME] = 0; |
| } |
| } |
| else if (IXANY && info->name == decctlq) { |
| if (reversed) |
| mode->c_iflag |= IXANY; |
| else |
| mode->c_iflag &= ~IXANY; |
| } |
| else if (TABDLY && info->name == stty_tabs) { |
| if (reversed) |
| mode->c_oflag = (mode->c_oflag & ~TABDLY) | TAB3; |
| else |
| mode->c_oflag = (mode->c_oflag & ~TABDLY) | TAB0; |
| } |
| else if (OXTABS && info->name == stty_tabs) { |
| if (reversed) |
| mode->c_oflag |= OXTABS; |
| else |
| mode->c_oflag &= ~OXTABS; |
| } |
| else if (XCASE && IUCLC && OLCUC |
| && (info->name == stty_lcase || info->name == stty_LCASE)) { |
| if (reversed) { |
| mode->c_lflag &= ~XCASE; |
| mode->c_iflag &= ~IUCLC; |
| mode->c_oflag &= ~OLCUC; |
| } else { |
| mode->c_lflag |= XCASE; |
| mode->c_iflag |= IUCLC; |
| mode->c_oflag |= OLCUC; |
| } |
| } |
| else if (info->name == stty_crt) { |
| mode->c_lflag |= ECHOE | ECHOCTL | ECHOKE; |
| } |
| else if (info->name == stty_dec) { |
| mode->c_cc[VINTR] = 3; /* ^C */ |
| mode->c_cc[VERASE] = 127; /* DEL */ |
| mode->c_cc[VKILL] = 21; /* ^U */ |
| mode->c_lflag |= ECHOE | ECHOCTL | ECHOKE; |
| if (IXANY) mode->c_iflag &= ~IXANY; |
| } |
| } |
| |
| static void set_control_char_or_die(const struct control_info *info, |
| const char *arg, struct termios *mode) |
| { |
| unsigned char value; |
| |
| if (info->name == stty_min || info->name == stty_time) |
| value = xatoul_range_sfx(arg, 0, 0xff, stty_suffixes); |
| else if (arg[0] == '\0' || arg[1] == '\0') |
| value = arg[0]; |
| else if (!strcmp(arg, "^-") || !strcmp(arg, "undef")) |
| value = _POSIX_VDISABLE; |
| else if (arg[0] == '^') { /* Ignore any trailing junk (^Cjunk) */ |
| value = arg[1] & 0x1f; /* Non-letters get weird results */ |
| if (arg[1] == '?') |
| value = 127; |
| } else |
| value = xatoul_range_sfx(arg, 0, 0xff, stty_suffixes); |
| mode->c_cc[info->offset] = value; |
| } |
| |
| #define STTY_require_set_attr (1<<0) |
| #define STTY_speed_was_set (1<<1) |
| #define STTY_verbose_output (1<<2) |
| #define STTY_recoverable_output (1<<3) |
| #define STTY_noargs (1<<4) |
| int stty_main(int argc, char **argv); |
| int stty_main(int argc, char **argv) |
| { |
| struct termios mode; |
| void (*output_func)(const struct termios *, const int); |
| const char *file_name = NULL; |
| int display_all = 0; |
| int stty_state; |
| int k; |
| |
| stty_state = STTY_noargs; |
| output_func = do_display; |
| |
| /* First pass: only parse/verify command line params */ |
| k = 0; |
| while (argv[++k]) { |
| const struct mode_info *mp; |
| const struct control_info *cp; |
| const char *arg = argv[k]; |
| const char *argnext = argv[k+1]; |
| int param; |
| |
| if (arg[0] == '-') { |
| int i; |
| mp = find_mode(arg+1); |
| if (mp) { |
| if (!(mp->flags & REV)) |
| goto invalid_argument; |
| stty_state &= ~STTY_noargs; |
| continue; |
| } |
| /* It is an option - parse it */ |
| i = 0; |
| while (arg[++i]) { |
| switch (arg[i]) { |
| case 'a': |
| stty_state |= STTY_verbose_output; |
| output_func = do_display; |
| display_all = 1; |
| break; |
| case 'g': |
| stty_state |= STTY_recoverable_output; |
| output_func = display_recoverable; |
| break; |
| case 'F': |
| if (file_name) |
| bb_error_msg_and_die("only one device may be specified"); |
| file_name = &arg[i+1]; /* "-Fdevice" ? */ |
| if (!file_name[0]) { /* nope, "-F device" */ |
| int p = k+1; /* argv[p] is argnext */ |
| file_name = argnext; |
| if (!file_name) |
| bb_error_msg_and_die(bb_msg_requires_arg, "-F"); |
| /* remove -F param from arg[vc] */ |
| --argc; |
| while (argv[p]) { argv[p] = argv[p+1]; ++p; } |
| } |
| goto end_option; |
| default: |
| goto invalid_argument; |
| } |
| } |
| end_option: |
| continue; |
| } |
| |
| mp = find_mode(arg); |
| if (mp) { |
| stty_state &= ~STTY_noargs; |
| continue; |
| } |
| |
| cp = find_control(arg); |
| if (cp) { |
| if (!argnext) |
| bb_error_msg_and_die(bb_msg_requires_arg, arg); |
| /* called for the side effect of xfunc death only */ |
| set_control_char_or_die(cp, argnext, &mode); |
| stty_state &= ~STTY_noargs; |
| ++k; |
| continue; |
| } |
| |
| param = find_param(arg); |
| if (param & param_need_arg) { |
| if (!argnext) |
| bb_error_msg_and_die(bb_msg_requires_arg, arg); |
| ++k; |
| } |
| |
| switch (param) { |
| #ifdef HAVE_C_LINE |
| case param_line: |
| # ifndef TIOCGWINSZ |
| xatoul_range_sfx(argnext, 1, INT_MAX, stty_suffixes); |
| break; |
| # endif /* else fall-through */ |
| #endif |
| #ifdef TIOCGWINSZ |
| case param_rows: |
| case param_cols: |
| xatoul_range_sfx(argnext, 1, INT_MAX, stty_suffixes); |
| break; |
| case param_size: |
| #endif |
| case param_speed: |
| break; |
| case param_ispeed: |
| /* called for the side effect of xfunc death only */ |
| set_speed_or_die(input_speed, argnext, &mode); |
| break; |
| case param_ospeed: |
| /* called for the side effect of xfunc death only */ |
| set_speed_or_die(output_speed, argnext, &mode); |
| break; |
| default: |
| if (recover_mode(arg, &mode) == 1) break; |
| if (tty_value_to_baud(xatou(arg)) != (speed_t) -1) break; |
| invalid_argument: |
| bb_error_msg_and_die("invalid argument '%s'", arg); |
| } |
| stty_state &= ~STTY_noargs; |
| } |
| |
| /* Specifying both -a and -g is an error */ |
| if ((stty_state & (STTY_verbose_output | STTY_recoverable_output)) == |
| (STTY_verbose_output | STTY_recoverable_output)) |
| bb_error_msg_and_die("verbose and stty-readable output styles are mutually exclusive"); |
| /* Specifying -a or -g with non-options is an error */ |
| if (!(stty_state & STTY_noargs) && |
| (stty_state & (STTY_verbose_output | STTY_recoverable_output))) |
| bb_error_msg_and_die("modes may not be set when specifying an output style"); |
| |
| /* Now it is safe to start doing things */ |
| if (file_name) { |
| int fd, fdflags; |
| device_name = file_name; |
| fd = xopen(device_name, O_RDONLY | O_NONBLOCK); |
| if (fd != STDIN_FILENO) { |
| dup2(fd, STDIN_FILENO); |
| close(fd); |
| } |
| fdflags = fcntl(STDIN_FILENO, F_GETFL); |
| if (fdflags < 0 || |
| fcntl(STDIN_FILENO, F_SETFL, fdflags & ~O_NONBLOCK) < 0) |
| perror_on_device_and_die("%s: cannot reset non-blocking mode"); |
| } |
| |
| /* Initialize to all zeroes so there is no risk memcmp will report a |
| spurious difference in an uninitialized portion of the structure */ |
| memset(&mode, 0, sizeof(mode)); |
| if (tcgetattr(STDIN_FILENO, &mode)) |
| perror_on_device_and_die("%s"); |
| |
| if (stty_state & (STTY_verbose_output | STTY_recoverable_output | STTY_noargs)) { |
| get_terminal_width_height(STDOUT_FILENO, &max_col, NULL); |
| output_func(&mode, display_all); |
| return EXIT_SUCCESS; |
| } |
| |
| /* Second pass: perform actions */ |
| k = 0; |
| while (argv[++k]) { |
| const struct mode_info *mp; |
| const struct control_info *cp; |
| const char *arg = argv[k]; |
| const char *argnext = argv[k+1]; |
| int param; |
| |
| if (arg[0] == '-') { |
| mp = find_mode(arg+1); |
| if (mp) { |
| set_mode(mp, 1 /* reversed */, &mode); |
| stty_state |= STTY_require_set_attr; |
| } |
| /* It is an option - already parsed. Skip it */ |
| continue; |
| } |
| |
| mp = find_mode(arg); |
| if (mp) { |
| set_mode(mp, 0 /* non-reversed */, &mode); |
| stty_state |= STTY_require_set_attr; |
| continue; |
| } |
| |
| cp = find_control(arg); |
| if (cp) { |
| ++k; |
| set_control_char_or_die(cp, argnext, &mode); |
| stty_state |= STTY_require_set_attr; |
| continue; |
| } |
| |
| param = find_param(arg); |
| if (param & param_need_arg) { |
| ++k; |
| } |
| |
| switch (param) { |
| #ifdef HAVE_C_LINE |
| case param_line: |
| mode.c_line = xatoul_sfx(argnext, stty_suffixes); |
| stty_state |= STTY_require_set_attr; |
| break; |
| #endif |
| #ifdef TIOCGWINSZ |
| case param_cols: |
| set_window_size(-1, xatoul_sfx(argnext, stty_suffixes)); |
| break; |
| case param_size: |
| display_window_size(0); |
| break; |
| case param_rows: |
| set_window_size(xatoul_sfx(argnext, stty_suffixes), -1); |
| break; |
| #endif |
| case param_speed: |
| display_speed(&mode, 0); |
| break; |
| case param_ispeed: |
| set_speed_or_die(input_speed, argnext, &mode); |
| stty_state |= (STTY_require_set_attr | STTY_speed_was_set); |
| break; |
| case param_ospeed: |
| set_speed_or_die(output_speed, argnext, &mode); |
| stty_state |= (STTY_require_set_attr | STTY_speed_was_set); |
| break; |
| default: |
| if (recover_mode(arg, &mode) == 1) |
| stty_state |= STTY_require_set_attr; |
| else /* true: if (tty_value_to_baud(xatou(arg)) != (speed_t) -1) */{ |
| set_speed_or_die(both_speeds, arg, &mode); |
| stty_state |= (STTY_require_set_attr | STTY_speed_was_set); |
| } /* else - impossible (caught in the first pass): |
| bb_error_msg_and_die("invalid argument '%s'", arg); */ |
| } |
| } |
| |
| if (stty_state & STTY_require_set_attr) { |
| struct termios new_mode; |
| |
| if (tcsetattr(STDIN_FILENO, TCSADRAIN, &mode)) |
| perror_on_device_and_die("%s"); |
| |
| /* POSIX (according to Zlotnick's book) tcsetattr returns zero if |
| it performs *any* of the requested operations. This means it |
| can report 'success' when it has actually failed to perform |
| some proper subset of the requested operations. To detect |
| this partial failure, get the current terminal attributes and |
| compare them to the requested ones */ |
| |
| /* Initialize to all zeroes so there is no risk memcmp will report a |
| spurious difference in an uninitialized portion of the structure */ |
| memset(&new_mode, 0, sizeof(new_mode)); |
| if (tcgetattr(STDIN_FILENO, &new_mode)) |
| perror_on_device_and_die("%s"); |
| |
| if (memcmp(&mode, &new_mode, sizeof(mode)) != 0) { |
| #ifdef CIBAUD |
| /* SunOS 4.1.3 (at least) has the problem that after this sequence, |
| tcgetattr (&m1); tcsetattr (&m1); tcgetattr (&m2); |
| sometimes (m1 != m2). The only difference is in the four bits |
| of the c_cflag field corresponding to the baud rate. To save |
| Sun users a little confusion, don't report an error if this |
| happens. But suppress the error only if we haven't tried to |
| set the baud rate explicitly -- otherwise we'd never give an |
| error for a true failure to set the baud rate */ |
| |
| new_mode.c_cflag &= (~CIBAUD); |
| if ((stty_state & STTY_speed_was_set) |
| || memcmp(&mode, &new_mode, sizeof(mode)) != 0) |
| #endif |
| perror_on_device_and_die("%s: cannot perform all requested operations"); |
| } |
| } |
| |
| return EXIT_SUCCESS; |
| } |