| /* vi: set sw=4 ts=4: */ |
| /* |
| * Progress bar code. |
| */ |
| /* Original copyright notice which applies to the CONFIG_FEATURE_WGET_STATUSBAR stuff, |
| * much of which was blatantly stolen from openssh. |
| */ |
| /*- |
| * Copyright (c) 1992, 1993 |
| * The Regents of the University of California. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * 3. BSD Advertising Clause omitted per the July 22, 1999 licensing change |
| * ftp://ftp.cs.berkeley.edu/pub/4bsd/README.Impt.License.Change |
| * |
| * 4. Neither the name of the University nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ''AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| */ |
| #include "libbb.h" |
| #include "unicode.h" |
| |
| enum { |
| /* Seconds when xfer considered "stalled" */ |
| STALLTIME = 5 |
| }; |
| |
| void FAST_FUNC bb_progress_init(bb_progress_t *p, const char *curfile) |
| { |
| #if ENABLE_UNICODE_SUPPORT |
| init_unicode(); |
| p->curfile = unicode_conv_to_printable_fixedwidth(/*NULL,*/ curfile, 20); |
| #else |
| p->curfile = curfile; |
| #endif |
| p->start_sec = monotonic_sec(); |
| p->last_update_sec = p->start_sec; |
| p->last_change_sec = p->start_sec; |
| p->last_size = 0; |
| #if 0 |
| p->last_eta = INT_MAX; |
| #endif |
| } |
| |
| /* File already had beg_size bytes. |
| * Then we started downloading. |
| * We downloaded "transferred" bytes so far. |
| * Download is expected to stop when total size (beg_size + transferred) |
| * will be "totalsize" bytes. |
| * If totalsize == 0, then it is unknown. |
| */ |
| int FAST_FUNC bb_progress_update(bb_progress_t *p, |
| uoff_t beg_size, |
| uoff_t transferred, |
| uoff_t totalsize) |
| { |
| char numbuf5[6]; /* 5 + 1 for NUL */ |
| unsigned since_last_update, elapsed; |
| int notty; |
| |
| //transferred = 1234; /* use for stall detection testing */ |
| //totalsize = 0; /* use for unknown size download testing */ |
| |
| elapsed = monotonic_sec(); |
| since_last_update = elapsed - p->last_update_sec; |
| p->last_update_sec = elapsed; |
| |
| if (totalsize != 0 && transferred >= totalsize - beg_size) { |
| /* Last call. Do not skip this update */ |
| transferred = totalsize - beg_size; /* sanitize just in case */ |
| } |
| else if (since_last_update == 0) { |
| /* |
| * Do not update on every call |
| * (we can be called on every network read!) |
| */ |
| return -1; |
| } |
| |
| /* Before we lose real, unscaled sizes, produce human-readable size string */ |
| smart_ulltoa5(beg_size + transferred, numbuf5, " kMGTPEZY")[0] = '\0'; |
| |
| /* |
| * Scale sizes down if they are close to overflowing. |
| * This allows calculations like (100 * transferred / totalsize) |
| * without risking overflow: we guarantee 10 highest bits to be 0. |
| * Introduced error is less than 1 / 2^12 ~= 0.025% |
| */ |
| while (totalsize >= (1 << 20)) { |
| totalsize >>= 8; |
| beg_size >>= 8; |
| transferred >>= 8; |
| } |
| /* If they were huge, now they are scaled down to [1048575,4096] range. |
| * (N * totalsize) won't overflow 32 bits for N up to 4096. |
| */ |
| #if ULONG_MAX == 0xffffffff |
| /* 32-bit CPU, uoff_t arithmetic is complex on it, cast variables to narrower types */ |
| # define totalsize ((unsigned)totalsize) |
| # define beg_size ((unsigned)beg_size) |
| # define transferred ((unsigned)transferred) |
| #endif |
| |
| notty = !isatty(STDERR_FILENO); |
| |
| if (ENABLE_UNICODE_SUPPORT) |
| fprintf(stderr, "\r%s " + notty, p->curfile); |
| else |
| fprintf(stderr, "\r%-20.20s " + notty, p->curfile); |
| |
| if (totalsize != 0) { |
| int barlength; |
| unsigned beg_and_transferred; /* does not need uoff_t, see scaling code */ |
| unsigned ratio; |
| |
| beg_and_transferred = beg_size + transferred; |
| ratio = 100 * beg_and_transferred / totalsize; |
| /* can't overflow ^^^^^^^^^^^^^^^ */ |
| fprintf(stderr, "%3u%% ", ratio); |
| |
| barlength = get_terminal_width(2) - 48; |
| /* |
| * Must reject barlength <= 0 (terminal too narrow). While at it, |
| * also reject: 1-char bar (useless), 2-char bar (ridiculous). |
| */ |
| if (barlength > 2) { |
| if (barlength > 999) |
| barlength = 999; |
| { |
| /* god bless gcc for variable arrays :) */ |
| char buf[barlength + 1]; |
| unsigned stars = (unsigned)barlength * beg_and_transferred / totalsize; |
| /* can't overflow ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */ |
| memset(buf, ' ', barlength); |
| buf[barlength] = '\0'; |
| memset(buf, '*', stars); |
| fprintf(stderr, "|%s| ", buf); |
| } |
| } |
| } |
| |
| fputs(numbuf5, stderr); /* "NNNNk" */ |
| |
| since_last_update = elapsed - p->last_change_sec; |
| if ((unsigned)transferred != p->last_size) { |
| p->last_change_sec = elapsed; |
| p->last_size = (unsigned)transferred; |
| if (since_last_update >= STALLTIME) { |
| /* We "cut out" these seconds from elapsed time |
| * by adjusting start time */ |
| p->start_sec += since_last_update; |
| } |
| since_last_update = 0; /* we are un-stalled now */ |
| } |
| |
| elapsed -= p->start_sec; /* now it's "elapsed since start" */ |
| |
| if (since_last_update >= STALLTIME) { |
| fprintf(stderr, " - stalled -"); |
| } else if (!totalsize || !transferred || (int)elapsed < 0) { |
| fprintf(stderr, " --:--:-- ETA"); |
| } else { |
| unsigned eta, secs, hours; |
| unsigned bytes; |
| |
| bytes = totalsize - beg_size; |
| |
| /* Estimated remaining time = |
| * estimated_sec_to_dl_bytes - elapsed_sec = |
| * bytes / average_bytes_sec_so_far - elapsed = |
| * bytes / (transferred/elapsed) - elapsed = |
| * bytes * elapsed / transferred - elapsed |
| */ |
| eta = (unsigned long)bytes * elapsed / transferred - elapsed; |
| /* if 32bit, can overflow ^^^^^^^^^^, but this would only show bad ETA */ |
| if (eta >= 1000*60*60) |
| eta = 1000*60*60 - 1; |
| #if 0 |
| /* To prevent annoying "back-and-forth" estimation jitter, |
| * if new ETA is larger than the last just by a few seconds, |
| * disregard it, and show last one. The end result is that |
| * ETA usually only decreases, unless download slows down a lot. |
| */ |
| if ((unsigned)(eta - p->last_eta) < 10) |
| eta = p->last_eta; |
| p->last_eta = eta; |
| #endif |
| secs = eta % 3600; |
| hours = eta / 3600; |
| fprintf(stderr, "%3u:%02u:%02u ETA", hours, secs / 60, secs % 60); |
| } |
| if (notty) |
| fputc('\n', stderr); |
| return notty; |
| } |