blob: deabdf0aad30474f5df350dd85a764f42bfa4bf6 [file] [log] [blame]
These files are required to flash the Mendel Linux OS to an attached device
using fastboot:
1. On your host computer, install the `fastboot` tool.
2. Using either the serial console or the `fastboot` tool, put the device into
fastboot mode (`sudo reboot-bootloader`).
3. Connect to the device using a USB cable, attached to the device's USB data
"OTG" port.
4. Run the `` script in this directory.
For detailed instructions, visit
If your board fails to boot, `` can be used to get your
device into fastboot mode. Please see
for more details.