| .TH HCIATTACH 8 "Jan 22 2002" BlueZ "Linux System Administration" |
| .SH NAME |
| hciattach \- attach serial devices via UART HCI to BlueZ stack |
| .SH SYNOPSIS |
| .B hciattach |
| [ -n ] [ -p ] [ -t timeout ] < |
| .I tty |
| > < |
| .I type |
| | |
| .I id |
| > [ |
| .I speed |
| ] [ |
| .I flow |
| ] |
| .SH DESCRIPTION |
| .LP |
| Hciattach is used to attach a serial UART to the Bluetooth stack as HCI |
| transport interface. |
| .SH OPTIONS |
| .TP |
| .BI -n |
| Don't detach from controlling terminal. |
| .TP |
| .BI -p |
| Print the PID when detaching. |
| .TP |
| .BI -t timeout |
| Specify an initialization timeout. (Default is 5 seconds.) |
| .TP |
| .I <tty> |
| This specifies the serial device to attach. A leading |
| .B /dev |
| can be omitted. Examples: |
| .B /dev/ttyS1 |
| .B ttyS2 |
| .TP |
| .I <type | id> |
| The |
| .B type |
| or |
| .B id |
| of the Bluetooth device that is to be attached, i.e. vendor or other device |
| specific identifier. Currently supported types are |
| .RS |
| .TP |
| .B type |
| .B description |
| .TP |
| any |
| Unspecified HCI_UART interface, no vendor specific options |
| .TP |
| ericsson |
| Ericsson based modules |
| .TP |
| digi |
| Digianswer based cards |
| .TP |
| xircom |
| Xircom PCMCIA cards: Credit Card Adapter and Real Port Adapter |
| .TP |
| csr |
| CSR Casira serial adapter or BrainBoxes serial dongle (BL642) |
| .TP |
| bboxes |
| BrainBoxes PCMCIA card (BL620) |
| .TP |
| swave |
| Silicon Wave kits |
| .TP |
| bcsp |
| Serial adapters using CSR chips with BCSP serial protocol |
| .RE |
| |
| Supported IDs are (manufacturer id, product id) |
| .RS |
| .TP |
| 0x0105, 0x080a |
| Xircom PCMCIA cards: Credit Card Adapter and Real Port Adapter |
| .TP |
| 0x0160, 0x0002 |
| BrainBoxes PCMCIA card (BL620) |
| .RE |
| |
| .TP |
| .I <speed> |
| The |
| .B speed |
| specifies the UART speed to use. Baudrates higher than 115.200bps require |
| vendor specific initializations that are not implemented for all types of |
| devices. In general the following speeds are supported: |
| |
| .B 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 |
| |
| Supported vendor devices are automatically initialised to their respective |
| best settings. |
| .TP |
| .I <flow> |
| If the keyword |
| .B flow |
| is appended to the list of options then hardware flow control is forced on |
| the serial link ( |
| .B CRTSCTS |
| ). All above mentioned device types have |
| .B flow |
| set by default. To force no flow control use |
| .B noflow |
| instead. |
| |
| .SH AUTHORS |
| Written by Maxim Krasnyansky <maxk@qualcomm.com> |
| .PP |
| Manual page by Nils Faerber <nils@kernelconcepts.de> |
