| /* |
| * |
| * BlueZ - Bluetooth protocol stack for Linux |
| * |
| * Copyright (C) 2010 Nokia Corporation |
| * Copyright (C) 2010 Marcel Holtmann <marcel@holtmann.org> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| */ |
| |
| #ifdef HAVE_CONFIG_H |
| #include <config.h> |
| #endif |
| |
| #include <errno.h> |
| #include <stdlib.h> |
| #include <unistd.h> |
| |
| #include <glib.h> |
| |
| #include "lib/bluetooth.h" |
| #include "lib/hci.h" |
| #include "lib/hci_lib.h" |
| #include "lib/sdp.h" |
| #include "lib/uuid.h" |
| |
| #include "src/shared/util.h" |
| #include "att.h" |
| #include "btio/btio.h" |
| #include "gattrib.h" |
| #include "gatt.h" |
| #include "gatttool.h" |
| |
| static char *opt_src = NULL; |
| static char *opt_dst = NULL; |
| static char *opt_dst_type = NULL; |
| static char *opt_value = NULL; |
| static char *opt_sec_level = NULL; |
| static bt_uuid_t *opt_uuid = NULL; |
| static int opt_start = 0x0001; |
| static int opt_end = 0xffff; |
| static int opt_handle = -1; |
| static int opt_mtu = 0; |
| static int opt_psm = 0; |
| static gboolean opt_primary = FALSE; |
| static gboolean opt_characteristics = FALSE; |
| static gboolean opt_char_read = FALSE; |
| static gboolean opt_listen = FALSE; |
| static gboolean opt_char_desc = FALSE; |
| static gboolean opt_char_write = FALSE; |
| static gboolean opt_char_write_req = FALSE; |
| static gboolean opt_interactive = FALSE; |
| static GMainLoop *event_loop; |
| static gboolean got_error = FALSE; |
| static GSourceFunc operation; |
| |
| struct characteristic_data { |
| GAttrib *attrib; |
| uint16_t start; |
| uint16_t end; |
| }; |
| |
| static void events_handler(const uint8_t *pdu, uint16_t len, gpointer user_data) |
| { |
| GAttrib *attrib = user_data; |
| uint8_t *opdu; |
| uint16_t handle, i, olen = 0; |
| size_t plen; |
| |
| handle = get_le16(&pdu[1]); |
| |
| switch (pdu[0]) { |
| case ATT_OP_HANDLE_NOTIFY: |
| g_print("Notification handle = 0x%04x value: ", handle); |
| break; |
| case ATT_OP_HANDLE_IND: |
| g_print("Indication handle = 0x%04x value: ", handle); |
| break; |
| default: |
| g_print("Invalid opcode\n"); |
| return; |
| } |
| |
| for (i = 3; i < len; i++) |
| g_print("%02x ", pdu[i]); |
| |
| g_print("\n"); |
| |
| if (pdu[0] == ATT_OP_HANDLE_NOTIFY) |
| return; |
| |
| opdu = g_attrib_get_buffer(attrib, &plen); |
| olen = enc_confirmation(opdu, plen); |
| |
| if (olen > 0) |
| g_attrib_send(attrib, 0, opdu, olen, NULL, NULL, NULL); |
| } |
| |
| static gboolean listen_start(gpointer user_data) |
| { |
| GAttrib *attrib = user_data; |
| |
| g_attrib_register(attrib, ATT_OP_HANDLE_NOTIFY, GATTRIB_ALL_HANDLES, |
| events_handler, attrib, NULL); |
| g_attrib_register(attrib, ATT_OP_HANDLE_IND, GATTRIB_ALL_HANDLES, |
| events_handler, attrib, NULL); |
| |
| return FALSE; |
| } |
| |
| static void connect_cb(GIOChannel *io, GError *err, gpointer user_data) |
| { |
| GAttrib *attrib; |
| uint16_t mtu; |
| uint16_t cid; |
| GError *gerr = NULL; |
| |
| if (err) { |
| g_printerr("%s\n", err->message); |
| got_error = TRUE; |
| g_main_loop_quit(event_loop); |
| } |
| |
| bt_io_get(io, &gerr, BT_IO_OPT_IMTU, &mtu, |
| BT_IO_OPT_CID, &cid, BT_IO_OPT_INVALID); |
| |
| if (gerr) { |
| g_printerr("Can't detect MTU, using default: %s", |
| gerr->message); |
| g_error_free(gerr); |
| mtu = ATT_DEFAULT_LE_MTU; |
| } |
| |
| if (cid == ATT_CID) |
| mtu = ATT_DEFAULT_LE_MTU; |
| |
| attrib = g_attrib_new(io, mtu, false); |
| |
| if (opt_listen) |
| g_idle_add(listen_start, attrib); |
| |
| operation(attrib); |
| } |
| |
| static void primary_all_cb(uint8_t status, GSList *services, void *user_data) |
| { |
| GSList *l; |
| |
| if (status) { |
| g_printerr("Discover all primary services failed: %s\n", |
| att_ecode2str(status)); |
| goto done; |
| } |
| |
| for (l = services; l; l = l->next) { |
| struct gatt_primary *prim = l->data; |
| g_print("attr handle = 0x%04x, end grp handle = 0x%04x " |
| "uuid: %s\n", prim->range.start, prim->range.end, prim->uuid); |
| } |
| |
| done: |
| g_main_loop_quit(event_loop); |
| } |
| |
| static void primary_by_uuid_cb(uint8_t status, GSList *ranges, void *user_data) |
| { |
| GSList *l; |
| |
| if (status != 0) { |
| g_printerr("Discover primary services by UUID failed: %s\n", |
| att_ecode2str(status)); |
| goto done; |
| } |
| |
| for (l = ranges; l; l = l->next) { |
| struct att_range *range = l->data; |
| g_print("Starting handle: %04x Ending handle: %04x\n", |
| range->start, range->end); |
| } |
| |
| done: |
| g_main_loop_quit(event_loop); |
| } |
| |
| static gboolean primary(gpointer user_data) |
| { |
| GAttrib *attrib = user_data; |
| |
| if (opt_uuid) |
| gatt_discover_primary(attrib, opt_uuid, primary_by_uuid_cb, |
| NULL); |
| else |
| gatt_discover_primary(attrib, NULL, primary_all_cb, NULL); |
| |
| return FALSE; |
| } |
| |
| static void char_discovered_cb(uint8_t status, GSList *characteristics, |
| void *user_data) |
| { |
| GSList *l; |
| |
| if (status) { |
| g_printerr("Discover all characteristics failed: %s\n", |
| att_ecode2str(status)); |
| goto done; |
| } |
| |
| for (l = characteristics; l; l = l->next) { |
| struct gatt_char *chars = l->data; |
| |
| g_print("handle = 0x%04x, char properties = 0x%02x, char value " |
| "handle = 0x%04x, uuid = %s\n", chars->handle, |
| chars->properties, chars->value_handle, chars->uuid); |
| } |
| |
| done: |
| g_main_loop_quit(event_loop); |
| } |
| |
| static gboolean characteristics(gpointer user_data) |
| { |
| GAttrib *attrib = user_data; |
| |
| gatt_discover_char(attrib, opt_start, opt_end, opt_uuid, |
| char_discovered_cb, NULL); |
| |
| return FALSE; |
| } |
| |
| static void char_read_cb(guint8 status, const guint8 *pdu, guint16 plen, |
| gpointer user_data) |
| { |
| uint8_t value[plen]; |
| ssize_t vlen; |
| int i; |
| |
| if (status != 0) { |
| g_printerr("Characteristic value/descriptor read failed: %s\n", |
| att_ecode2str(status)); |
| goto done; |
| } |
| |
| vlen = dec_read_resp(pdu, plen, value, sizeof(value)); |
| if (vlen < 0) { |
| g_printerr("Protocol error\n"); |
| goto done; |
| } |
| g_print("Characteristic value/descriptor: "); |
| for (i = 0; i < vlen; i++) |
| g_print("%02x ", value[i]); |
| g_print("\n"); |
| |
| done: |
| if (!opt_listen) |
| g_main_loop_quit(event_loop); |
| } |
| |
| static void char_read_by_uuid_cb(guint8 status, const guint8 *pdu, |
| guint16 plen, gpointer user_data) |
| { |
| struct att_data_list *list; |
| int i; |
| |
| if (status != 0) { |
| g_printerr("Read characteristics by UUID failed: %s\n", |
| att_ecode2str(status)); |
| goto done; |
| } |
| |
| list = dec_read_by_type_resp(pdu, plen); |
| if (list == NULL) |
| goto done; |
| |
| for (i = 0; i < list->num; i++) { |
| uint8_t *value = list->data[i]; |
| int j; |
| |
| g_print("handle: 0x%04x \t value: ", get_le16(value)); |
| value += 2; |
| for (j = 0; j < list->len - 2; j++, value++) |
| g_print("%02x ", *value); |
| g_print("\n"); |
| } |
| |
| att_data_list_free(list); |
| |
| done: |
| g_main_loop_quit(event_loop); |
| } |
| |
| static gboolean characteristics_read(gpointer user_data) |
| { |
| GAttrib *attrib = user_data; |
| |
| if (opt_uuid != NULL) { |
| |
| gatt_read_char_by_uuid(attrib, opt_start, opt_end, opt_uuid, |
| char_read_by_uuid_cb, NULL); |
| |
| return FALSE; |
| } |
| |
| if (opt_handle <= 0) { |
| g_printerr("A valid handle is required\n"); |
| g_main_loop_quit(event_loop); |
| return FALSE; |
| } |
| |
| gatt_read_char(attrib, opt_handle, char_read_cb, attrib); |
| |
| return FALSE; |
| } |
| |
| static void mainloop_quit(gpointer user_data) |
| { |
| uint8_t *value = user_data; |
| |
| g_free(value); |
| g_main_loop_quit(event_loop); |
| } |
| |
| static gboolean characteristics_write(gpointer user_data) |
| { |
| GAttrib *attrib = user_data; |
| uint8_t *value; |
| size_t len; |
| |
| if (opt_handle <= 0) { |
| g_printerr("A valid handle is required\n"); |
| goto error; |
| } |
| |
| if (opt_value == NULL || opt_value[0] == '\0') { |
| g_printerr("A value is required\n"); |
| goto error; |
| } |
| |
| len = gatt_attr_data_from_string(opt_value, &value); |
| if (len == 0) { |
| g_printerr("Invalid value\n"); |
| goto error; |
| } |
| |
| gatt_write_cmd(attrib, opt_handle, value, len, mainloop_quit, value); |
| |
| g_free(value); |
| return FALSE; |
| |
| error: |
| g_main_loop_quit(event_loop); |
| return FALSE; |
| } |
| |
| static void char_write_req_cb(guint8 status, const guint8 *pdu, guint16 plen, |
| gpointer user_data) |
| { |
| if (status != 0) { |
| g_printerr("Characteristic Write Request failed: " |
| "%s\n", att_ecode2str(status)); |
| goto done; |
| } |
| |
| if (!dec_write_resp(pdu, plen) && !dec_exec_write_resp(pdu, plen)) { |
| g_printerr("Protocol error\n"); |
| goto done; |
| } |
| |
| g_print("Characteristic value was written successfully\n"); |
| |
| done: |
| if (!opt_listen) |
| g_main_loop_quit(event_loop); |
| } |
| |
| static gboolean characteristics_write_req(gpointer user_data) |
| { |
| GAttrib *attrib = user_data; |
| uint8_t *value; |
| size_t len; |
| |
| if (opt_handle <= 0) { |
| g_printerr("A valid handle is required\n"); |
| goto error; |
| } |
| |
| if (opt_value == NULL || opt_value[0] == '\0') { |
| g_printerr("A value is required\n"); |
| goto error; |
| } |
| |
| len = gatt_attr_data_from_string(opt_value, &value); |
| if (len == 0) { |
| g_printerr("Invalid value\n"); |
| goto error; |
| } |
| |
| gatt_write_char(attrib, opt_handle, value, len, char_write_req_cb, |
| NULL); |
| |
| g_free(value); |
| return FALSE; |
| |
| error: |
| g_main_loop_quit(event_loop); |
| return FALSE; |
| } |
| |
| static void char_desc_cb(uint8_t status, GSList *descriptors, void *user_data) |
| { |
| GSList *l; |
| |
| if (status) { |
| g_printerr("Discover descriptors failed: %s\n", |
| att_ecode2str(status)); |
| return; |
| } |
| |
| for (l = descriptors; l; l = l->next) { |
| struct gatt_desc *desc = l->data; |
| |
| g_print("handle = 0x%04x, uuid = %s\n", desc->handle, |
| desc->uuid); |
| } |
| |
| if (!opt_listen) |
| g_main_loop_quit(event_loop); |
| } |
| |
| static gboolean characteristics_desc(gpointer user_data) |
| { |
| GAttrib *attrib = user_data; |
| |
| gatt_discover_desc(attrib, opt_start, opt_end, NULL, char_desc_cb, |
| NULL); |
| |
| return FALSE; |
| } |
| |
| static gboolean parse_uuid(const char *key, const char *value, |
| gpointer user_data, GError **error) |
| { |
| if (!value) |
| return FALSE; |
| |
| opt_uuid = g_try_malloc(sizeof(bt_uuid_t)); |
| if (opt_uuid == NULL) |
| return FALSE; |
| |
| if (bt_string_to_uuid(opt_uuid, value) < 0) |
| return FALSE; |
| |
| return TRUE; |
| } |
| |
| static GOptionEntry primary_char_options[] = { |
| { "start", 's' , 0, G_OPTION_ARG_INT, &opt_start, |
| "Starting handle(optional)", "0x0001" }, |
| { "end", 'e' , 0, G_OPTION_ARG_INT, &opt_end, |
| "Ending handle(optional)", "0xffff" }, |
| { "uuid", 'u', G_OPTION_FLAG_OPTIONAL_ARG, G_OPTION_ARG_CALLBACK, |
| parse_uuid, "UUID16 or UUID128(optional)", "0x1801"}, |
| { NULL }, |
| }; |
| |
| static GOptionEntry char_rw_options[] = { |
| { "handle", 'a' , 0, G_OPTION_ARG_INT, &opt_handle, |
| "Read/Write characteristic by handle(required)", "0x0001" }, |
| { "value", 'n' , 0, G_OPTION_ARG_STRING, &opt_value, |
| "Write characteristic value (required for write operation)", |
| "0x0001" }, |
| {NULL}, |
| }; |
| |
| static GOptionEntry gatt_options[] = { |
| { "primary", 0, 0, G_OPTION_ARG_NONE, &opt_primary, |
| "Primary Service Discovery", NULL }, |
| { "characteristics", 0, 0, G_OPTION_ARG_NONE, &opt_characteristics, |
| "Characteristics Discovery", NULL }, |
| { "char-read", 0, 0, G_OPTION_ARG_NONE, &opt_char_read, |
| "Characteristics Value/Descriptor Read", NULL }, |
| { "char-write", 0, 0, G_OPTION_ARG_NONE, &opt_char_write, |
| "Characteristics Value Write Without Response (Write Command)", |
| NULL }, |
| { "char-write-req", 0, 0, G_OPTION_ARG_NONE, &opt_char_write_req, |
| "Characteristics Value Write (Write Request)", NULL }, |
| { "char-desc", 0, 0, G_OPTION_ARG_NONE, &opt_char_desc, |
| "Characteristics Descriptor Discovery", NULL }, |
| { "listen", 0, 0, G_OPTION_ARG_NONE, &opt_listen, |
| "Listen for notifications and indications", NULL }, |
| { "interactive", 'I', G_OPTION_FLAG_IN_MAIN, G_OPTION_ARG_NONE, |
| &opt_interactive, "Use interactive mode", NULL }, |
| { NULL }, |
| }; |
| |
| static GOptionEntry options[] = { |
| { "adapter", 'i', 0, G_OPTION_ARG_STRING, &opt_src, |
| "Specify local adapter interface", "hciX" }, |
| { "device", 'b', 0, G_OPTION_ARG_STRING, &opt_dst, |
| "Specify remote Bluetooth address", "MAC" }, |
| { "addr-type", 't', 0, G_OPTION_ARG_STRING, &opt_dst_type, |
| "Set LE address type. Default: public", "[public | random]"}, |
| { "mtu", 'm', 0, G_OPTION_ARG_INT, &opt_mtu, |
| "Specify the MTU size", "MTU" }, |
| { "psm", 'p', 0, G_OPTION_ARG_INT, &opt_psm, |
| "Specify the PSM for GATT/ATT over BR/EDR", "PSM" }, |
| { "sec-level", 'l', 0, G_OPTION_ARG_STRING, &opt_sec_level, |
| "Set security level. Default: low", "[low | medium | high]"}, |
| { NULL }, |
| }; |
| |
| int main(int argc, char *argv[]) |
| { |
| GOptionContext *context; |
| GOptionGroup *gatt_group, *params_group, *char_rw_group; |
| GError *gerr = NULL; |
| GIOChannel *chan; |
| |
| opt_dst_type = g_strdup("public"); |
| opt_sec_level = g_strdup("low"); |
| |
| context = g_option_context_new(NULL); |
| g_option_context_add_main_entries(context, options, NULL); |
| |
| /* GATT commands */ |
| gatt_group = g_option_group_new("gatt", "GATT commands", |
| "Show all GATT commands", NULL, NULL); |
| g_option_context_add_group(context, gatt_group); |
| g_option_group_add_entries(gatt_group, gatt_options); |
| |
| /* Primary Services and Characteristics arguments */ |
| params_group = g_option_group_new("params", |
| "Primary Services/Characteristics arguments", |
| "Show all Primary Services/Characteristics arguments", |
| NULL, NULL); |
| g_option_context_add_group(context, params_group); |
| g_option_group_add_entries(params_group, primary_char_options); |
| |
| /* Characteristics value/descriptor read/write arguments */ |
| char_rw_group = g_option_group_new("char-read-write", |
| "Characteristics Value/Descriptor Read/Write arguments", |
| "Show all Characteristics Value/Descriptor Read/Write " |
| "arguments", |
| NULL, NULL); |
| g_option_context_add_group(context, char_rw_group); |
| g_option_group_add_entries(char_rw_group, char_rw_options); |
| |
| if (!g_option_context_parse(context, &argc, &argv, &gerr)) { |
| g_printerr("%s\n", gerr->message); |
| g_clear_error(&gerr); |
| } |
| |
| if (opt_interactive) { |
| interactive(opt_src, opt_dst, opt_dst_type, opt_psm); |
| goto done; |
| } |
| |
| if (opt_primary) |
| operation = primary; |
| else if (opt_characteristics) |
| operation = characteristics; |
| else if (opt_char_read) |
| operation = characteristics_read; |
| else if (opt_char_write) |
| operation = characteristics_write; |
| else if (opt_char_write_req) |
| operation = characteristics_write_req; |
| else if (opt_char_desc) |
| operation = characteristics_desc; |
| else { |
| char *help = g_option_context_get_help(context, TRUE, NULL); |
| g_print("%s\n", help); |
| g_free(help); |
| got_error = TRUE; |
| goto done; |
| } |
| |
| if (opt_dst == NULL) { |
| g_print("Remote Bluetooth address required\n"); |
| got_error = TRUE; |
| goto done; |
| } |
| |
| chan = gatt_connect(opt_src, opt_dst, opt_dst_type, opt_sec_level, |
| opt_psm, opt_mtu, connect_cb, &gerr); |
| if (chan == NULL) { |
| g_printerr("%s\n", gerr->message); |
| g_clear_error(&gerr); |
| got_error = TRUE; |
| goto done; |
| } |
| |
| event_loop = g_main_loop_new(NULL, FALSE); |
| |
| g_main_loop_run(event_loop); |
| |
| g_main_loop_unref(event_loop); |
| |
| done: |
| g_option_context_free(context); |
| g_free(opt_src); |
| g_free(opt_dst); |
| g_free(opt_uuid); |
| g_free(opt_sec_level); |
| |
| if (got_error) |
| exit(EXIT_FAILURE); |
| else |
| exit(EXIT_SUCCESS); |
| } |