| /* |
| * |
| * BlueZ - Bluetooth protocol stack for Linux |
| * |
| * Copyright (C) 2004-2010 Marcel Holtmann <marcel@holtmann.org> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| */ |
| |
| #ifdef HAVE_CONFIG_H |
| #include <config.h> |
| #endif |
| |
| #include <stdio.h> |
| #include <errno.h> |
| #include <string.h> |
| |
| #include <usb.h> |
| |
| #include "csr.h" |
| |
| #ifdef NEED_USB_GET_BUSSES |
| static inline struct usb_bus *usb_get_busses(void) |
| { |
| return usb_busses; |
| } |
| #endif |
| |
| #ifdef NEED_USB_INTERRUPT_READ |
| static inline int usb_interrupt_read(usb_dev_handle *dev, int ep, char *bytes, int size, int timeout) |
| { |
| return usb_bulk_read(dev, ep, bytes, size, timeout); |
| } |
| #endif |
| |
| #ifndef USB_DIR_OUT |
| #define USB_DIR_OUT 0x00 |
| #endif |
| |
| static uint16_t seqnum = 0x0000; |
| |
| static struct usb_dev_handle *udev = NULL; |
| |
| int csr_open_usb(char *device) |
| { |
| struct usb_bus *bus; |
| struct usb_device *dev; |
| |
| usb_init(); |
| |
| usb_find_busses(); |
| usb_find_devices(); |
| |
| for (bus = usb_get_busses(); bus; bus = bus->next) { |
| for (dev = bus->devices; dev; dev = dev->next) { |
| if (dev->descriptor.bDeviceClass == USB_CLASS_HUB) |
| continue; |
| |
| if (dev->descriptor.idVendor != 0x0a12 || |
| dev->descriptor.idProduct != 0x0001) |
| continue; |
| |
| goto found; |
| } |
| } |
| |
| fprintf(stderr, "Device not available\n"); |
| |
| return -1; |
| |
| found: |
| udev = usb_open(dev); |
| if (!udev) { |
| fprintf(stderr, "Can't open device: %s (%d)\n", |
| strerror(errno), errno); |
| return -1; |
| } |
| |
| if (usb_claim_interface(udev, 0) < 0) { |
| fprintf(stderr, "Can't claim interface: %s (%d)\n", |
| strerror(errno), errno); |
| usb_close(udev); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int do_command(uint16_t command, uint16_t seqnum, uint16_t varid, uint8_t *value, uint16_t length) |
| { |
| unsigned char cp[254], rp[254]; |
| uint8_t cmd[10]; |
| uint16_t size; |
| int len, offset = 0; |
| |
| size = (length < 8) ? 9 : ((length + 1) / 2) + 5; |
| |
| cmd[0] = command & 0xff; |
| cmd[1] = command >> 8; |
| cmd[2] = size & 0xff; |
| cmd[3] = size >> 8; |
| cmd[4] = seqnum & 0xff; |
| cmd[5] = seqnum >> 8; |
| cmd[6] = varid & 0xff; |
| cmd[7] = varid >> 8; |
| cmd[8] = 0x00; |
| cmd[9] = 0x00; |
| |
| memset(cp, 0, sizeof(cp)); |
| cp[0] = 0x00; |
| cp[1] = 0xfc; |
| cp[2] = (size * 2) + 1; |
| cp[3] = 0xc2; |
| memcpy(cp + 4, cmd, sizeof(cmd)); |
| memcpy(cp + 14, value, length); |
| |
| usb_interrupt_read(udev, 0x81, (void *) rp, sizeof(rp), 2); |
| |
| if (usb_control_msg(udev, USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_DEVICE, |
| 0, 0, 0, (void *) cp, (size * 2) + 4, 1000) < 0) |
| return -1; |
| |
| switch (varid) { |
| case CSR_VARID_COLD_RESET: |
| case CSR_VARID_WARM_RESET: |
| case CSR_VARID_COLD_HALT: |
| case CSR_VARID_WARM_HALT: |
| return 0; |
| } |
| |
| do { |
| len = usb_interrupt_read(udev, 0x81, |
| (void *) (rp + offset), sizeof(rp) - offset, 10); |
| offset += len; |
| } while (len > 0); |
| |
| if (rp[0] != 0xff || rp[2] != 0xc2) { |
| errno = EIO; |
| return -1; |
| } |
| |
| if ((rp[11] + (rp[12] << 8)) != 0) { |
| errno = ENXIO; |
| return -1; |
| } |
| |
| memcpy(value, rp + 13, length); |
| |
| return 0; |
| } |
| |
| int csr_read_usb(uint16_t varid, uint8_t *value, uint16_t length) |
| { |
| return do_command(0x0000, seqnum++, varid, value, length); |
| } |
| |
| int csr_write_usb(uint16_t varid, uint8_t *value, uint16_t length) |
| { |
| return do_command(0x0002, seqnum++, varid, value, length); |
| } |
| |
| void csr_close_usb(void) |
| { |
| usb_release_interface(udev, 0); |
| usb_close(udev); |
| } |