src/main.conf - bluez-imx - Git at Google

 [General]

 # Default adapter name
 # Defaults to 'BlueZ X.YZ'
 #Name = BlueZ

 # Default device class. Only the major and minor device class bits are
 # considered. Defaults to '0x000000'.
 #Class = 0x000100

 # How long to stay in discoverable mode before going back to non-discoverable
 # The value is in seconds. Default is 180, i.e. 3 minutes.
 # 0 = disable timer, i.e. stay discoverable forever
 #DiscoverableTimeout = 0

 # How long to stay in pairable mode before going back to non-discoverable
 # The value is in seconds. Default is 0.
 # 0 = disable timer, i.e. stay pairable forever
 #PairableTimeout = 0

 # Use vendor id source (assigner), vendor, product and version information for
 # DID profile support. The values are separated by ":" and assigner, VID, PID
 # and version.
 # Possible vendor id source values: bluetooth, usb (defaults to usb)
 #DeviceID = bluetooth:1234:5678:abcd

 # Do reverse service discovery for previously unknown devices that connect to
 # us. This option is really only needed for qualification since the BITE tester
 # doesn't like us doing reverse SDP for some test cases (though there could in
 # theory be other useful purposes for this too). Defaults to 'true'.
 #ReverseServiceDiscovery = true

 # Enable name resolving after inquiry. Set it to 'false' if you don't need
 # remote devices name and want shorter discovery cycle. Defaults to 'true'.
 #NameResolving = true

 # Enable runtime persistency of debug link keys. Default is false which
 # makes debug link keys valid only for the duration of the connection
 # that they were created for.
 #DebugKeys = false

 # Restricts all controllers to the specified transport. Default value
 # is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW).
 # Possible values: "dual", "bredr", "le"
 #ControllerMode = dual

 # Enables Multi Profile Specification support. This allows to specify if
 # system supports only Multiple Profiles Single Device (MPSD) configuration
 # or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple
 # Devices (MPMD) configurations.
 # Possible values: "off", "single", "multiple"
 #MultiProfile = off

 # Permanently enables the Fast Connectable setting for adapters that
 # support it. When enabled other devices can connect faster to us,
 # however the tradeoff is increased power consumptions. This feature
 # will fully work only on kernel version 4.1 and newer. Defaults to
 # 'false'.
 #FastConnectable = false

 # Default privacy setting.
 # Enables use of private address.
 # Possible values: "off", "device", "network"
 # "network" option not supported currently
 # Defaults to "off"
 # Privacy = off

 [GATT]
 # GATT attribute cache.
 # Possible values:
 # always: Always cache attributes even for devices not paired, this is
 # recommended as it is best for interoperability, with more consistent
 # reconnection times and enables proper tracking of notifications for all
 # devices.
 # yes: Only cache attributes of paired devices.
 # no: Never cache attributes
 # Default: always
 #Cache = always

 [Policy]
 #
 # The ReconnectUUIDs defines the set of remote services that should try
 # to be reconnected to in case of a link loss (link supervision
 # timeout). The policy plugin should contain a sane set of values by
 # default, but this list can be overridden here. By setting the list to
 # empty the reconnection feature gets disabled.
 #ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb,0000111f-0000-1000-8000-00805f9b34fb,0000110a-0000-1000-8000-00805f9b34fb

 # ReconnectAttempts define the number of attempts to reconnect after a link
 # lost. Setting the value to 0 disables reconnecting feature.
 #ReconnectAttempts=7

 # ReconnectIntervals define the set of intervals in seconds to use in between
 # attempts.
 # If the number of attempts defined in ReconnectAttempts is bigger than the
 # set of intervals the last interval is repeated until the last attempt.
 #ReconnectIntervals=1,2,4,8,16,32,64

 # AutoEnable defines option to enable all controllers when they are found.
 # This includes adapters present on start as well as adapters that are plugged
 # in later on. Defaults to 'false'.
 #AutoEnable=false
	[General]

	# Default adapter name
	# Defaults to 'BlueZ X.YZ'
	#Name = BlueZ

	# Default device class. Only the major and minor device class bits are
	# considered. Defaults to '0x000000'.
	#Class = 0x000100

	# How long to stay in discoverable mode before going back to non-discoverable
	# The value is in seconds. Default is 180, i.e. 3 minutes.
	# 0 = disable timer, i.e. stay discoverable forever
	#DiscoverableTimeout = 0

	# How long to stay in pairable mode before going back to non-discoverable
	# The value is in seconds. Default is 0.
	# 0 = disable timer, i.e. stay pairable forever
	#PairableTimeout = 0

	# Use vendor id source (assigner), vendor, product and version information for
	# DID profile support. The values are separated by ":" and assigner, VID, PID
	# and version.
	# Possible vendor id source values: bluetooth, usb (defaults to usb)
	#DeviceID = bluetooth:1234:5678:abcd

	# Do reverse service discovery for previously unknown devices that connect to
	# us. This option is really only needed for qualification since the BITE tester
	# doesn't like us doing reverse SDP for some test cases (though there could in
	# theory be other useful purposes for this too). Defaults to 'true'.
	#ReverseServiceDiscovery = true

	# Enable name resolving after inquiry. Set it to 'false' if you don't need
	# remote devices name and want shorter discovery cycle. Defaults to 'true'.
	#NameResolving = true

	# Enable runtime persistency of debug link keys. Default is false which
	# makes debug link keys valid only for the duration of the connection
	# that they were created for.
	#DebugKeys = false

	# Restricts all controllers to the specified transport. Default value
	# is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW).
	# Possible values: "dual", "bredr", "le"
	#ControllerMode = dual

	# Enables Multi Profile Specification support. This allows to specify if
	# system supports only Multiple Profiles Single Device (MPSD) configuration
	# or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple
	# Devices (MPMD) configurations.
	# Possible values: "off", "single", "multiple"
	#MultiProfile = off

	# Permanently enables the Fast Connectable setting for adapters that
	# support it. When enabled other devices can connect faster to us,
	# however the tradeoff is increased power consumptions. This feature
	# will fully work only on kernel version 4.1 and newer. Defaults to
	# 'false'.
	#FastConnectable = false

	# Default privacy setting.
	# Enables use of private address.
	# Possible values: "off", "device", "network"
	# "network" option not supported currently
	# Defaults to "off"
	# Privacy = off

	[GATT]
	# GATT attribute cache.
	# Possible values:
	# always: Always cache attributes even for devices not paired, this is
	# recommended as it is best for interoperability, with more consistent
	# reconnection times and enables proper tracking of notifications for all
	# devices.
	# yes: Only cache attributes of paired devices.
	# no: Never cache attributes
	# Default: always
	#Cache = always

	[Policy]
	#
	# The ReconnectUUIDs defines the set of remote services that should try
	# to be reconnected to in case of a link loss (link supervision
	# timeout). The policy plugin should contain a sane set of values by
	# default, but this list can be overridden here. By setting the list to
	# empty the reconnection feature gets disabled.
	#ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb,0000111f-0000-1000-8000-00805f9b34fb,0000110a-0000-1000-8000-00805f9b34fb

	# ReconnectAttempts define the number of attempts to reconnect after a link
	# lost. Setting the value to 0 disables reconnecting feature.
	#ReconnectAttempts=7

	# ReconnectIntervals define the set of intervals in seconds to use in between
	# attempts.
	# If the number of attempts defined in ReconnectAttempts is bigger than the
	# set of intervals the last interval is repeated until the last attempt.
	#ReconnectIntervals=1,2,4,8,16,32,64

	# AutoEnable defines option to enable all controllers when they are found.
	# This includes adapters present on start as well as adapters that are plugged
	# in later on. Defaults to 'false'.
	#AutoEnable=false