| [General] |
| |
| # Default adapter name |
| # Defaults to 'BlueZ X.YZ' |
| #Name = BlueZ |
| |
| # Default device class. Only the major and minor device class bits are |
| # considered. Defaults to '0x000000'. |
| #Class = 0x000100 |
| |
| # How long to stay in discoverable mode before going back to non-discoverable |
| # The value is in seconds. Default is 180, i.e. 3 minutes. |
| # 0 = disable timer, i.e. stay discoverable forever |
| #DiscoverableTimeout = 0 |
| |
| # How long to stay in pairable mode before going back to non-discoverable |
| # The value is in seconds. Default is 0. |
| # 0 = disable timer, i.e. stay pairable forever |
| #PairableTimeout = 0 |
| |
| # Use vendor id source (assigner), vendor, product and version information for |
| # DID profile support. The values are separated by ":" and assigner, VID, PID |
| # and version. |
| # Possible vendor id source values: bluetooth, usb (defaults to usb) |
| #DeviceID = bluetooth:1234:5678:abcd |
| |
| # Do reverse service discovery for previously unknown devices that connect to |
| # us. This option is really only needed for qualification since the BITE tester |
| # doesn't like us doing reverse SDP for some test cases (though there could in |
| # theory be other useful purposes for this too). Defaults to 'true'. |
| #ReverseServiceDiscovery = true |
| |
| # Enable name resolving after inquiry. Set it to 'false' if you don't need |
| # remote devices name and want shorter discovery cycle. Defaults to 'true'. |
| #NameResolving = true |
| |
| # Enable runtime persistency of debug link keys. Default is false which |
| # makes debug link keys valid only for the duration of the connection |
| # that they were created for. |
| #DebugKeys = false |
| |
| # Restricts all controllers to the specified transport. Default value |
| # is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW). |
| # Possible values: "dual", "bredr", "le" |
| #ControllerMode = dual |
| |
| # Enables Multi Profile Specification support. This allows to specify if |
| # system supports only Multiple Profiles Single Device (MPSD) configuration |
| # or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple |
| # Devices (MPMD) configurations. |
| # Possible values: "off", "single", "multiple" |
| #MultiProfile = off |
| |
| # Permanently enables the Fast Connectable setting for adapters that |
| # support it. When enabled other devices can connect faster to us, |
| # however the tradeoff is increased power consumptions. This feature |
| # will fully work only on kernel version 4.1 and newer. Defaults to |
| # 'false'. |
| #FastConnectable = false |
| |
| # Default privacy setting. |
| # Enables use of private address. |
| # Possible values: "off", "device", "network" |
| # "network" option not supported currently |
| # Defaults to "off" |
| # Privacy = off |
| |
| [GATT] |
| # GATT attribute cache. |
| # Possible values: |
| # always: Always cache attributes even for devices not paired, this is |
| # recommended as it is best for interoperability, with more consistent |
| # reconnection times and enables proper tracking of notifications for all |
| # devices. |
| # yes: Only cache attributes of paired devices. |
| # no: Never cache attributes |
| # Default: always |
| #Cache = always |
| |
| # Minimum required Encryption Key Size for accessing secured characteristics. |
| # Possible values: 0 and 7-16. 0 means don't care. |
| # Defaults to 0 |
| # MinEncKeySize = 0 |
| |
| [Policy] |
| # |
| # The ReconnectUUIDs defines the set of remote services that should try |
| # to be reconnected to in case of a link loss (link supervision |
| # timeout). The policy plugin should contain a sane set of values by |
| # default, but this list can be overridden here. By setting the list to |
| # empty the reconnection feature gets disabled. |
| #ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb,0000111f-0000-1000-8000-00805f9b34fb,0000110a-0000-1000-8000-00805f9b34fb |
| |
| # ReconnectAttempts define the number of attempts to reconnect after a link |
| # lost. Setting the value to 0 disables reconnecting feature. |
| #ReconnectAttempts=7 |
| |
| # ReconnectIntervals define the set of intervals in seconds to use in between |
| # attempts. |
| # If the number of attempts defined in ReconnectAttempts is bigger than the |
| # set of intervals the last interval is repeated until the last attempt. |
| #ReconnectIntervals=1,2,4,8,16,32,64 |
| |
| # AutoEnable defines option to enable all controllers when they are found. |
| # This includes adapters present on start as well as adapters that are plugged |
| # in later on. Defaults to 'false'. |
| #AutoEnable=false |