| ver 2.8: |
| Use LIBS and LDADD instead of LDFLAGS. |
| Use HIDP subclass field for HID boot protocol. |
| Set olen before calling getsockopt() in pand. |
| Restore signals for dev-up script. |
| Add PID file support for pand. |
| Add size parameter to expand_name() in hcid. |
| Add support for audio source and audio sink SDP records. |
| Add support for HID virtual cable unplug. |
| Add support for AmbiCom BT2000C card. |
| |
| Note: |
| This version needs at least bluez-libs-2.8 |
| |
| ver 2.7: |
| Add support for getting the AFH channel map. |
| Add support for AFH mode. |
| Add support for inquiry mode. |
| Add Bluetooth backend for CUPS. |
| Add the hid2hci utility. |
| Add the hidd utility. |
| Add the pand utility. |
| Add the dund utility. |
| More endian bug fixes. |
| Give udev some time to create the RFCOMM device nodes. |
| Release the TTY if no device node is found. |
| New startup script for the Bluetooth subsystem. |
| Update to the autoconf stuff. |
| |
| Note: |
| This version needs at least bluez-libs-2.7 |
| |
| ver 2.6: |
| Change default prefix to /usr. |
| Add manpages for hcid and hcid.conf. |
| Add the sdpd server daemon. |
| Add the sdptool utility. |
| Add the ciptool utility. |
| |
| Note: |
| This version needs at least bluez-libs-2.6 |
| |
| ver 2.5: |
| hcitool changes: |
| Support for requesting authentication. |
| Support for setting connection encryption. |
| Fix some endian problems. |
| hciconfig changes: |
| Show revision information for Broadcom devices. |
| Replace unprintable characters in device name. |
| hcid changes: |
| Add D-Bus support for PIN request. |
| Report an error on PIN helper failure. |
| Fix some 64-bit problems. |
| Update bluepin script for GTK2. |
| |
| ver 2.4: |
| hcitool changes: |
| Increase number of inquiry responses. |
| Support for transmit power level. |
| Minor updates. |
| hciconfig changes: |
| Display all 8 bytes of the features. |
| Add support for reading and writing of IAC. |
| Correct decoding class of device. |
| Use Ericsson revision command for ST Microelectronics devices. |
| Display AVM firmware version with 'revision' command. |
| New code for CSR specific revision information. |
| hciattach changes: |
| Support for ST Microelectronics specific initialization. |
| Support for 3Com card version 3.0. |
| Support for TDK, IBM and Socket cards. |
| Support for initial baud rate. |
| Update man pages. |
| Fixes for some memory leaks. |
| |
| ver 2.3: |
| hciconfig changes: |
| CSR firmware version is now displayed by 'revision' command. |
| Voice command is working properly on big endian machines. |
| hciattach changes: |
| Added support for Texas Bluetooth modules. |
| Added support for high UART baud rates on Ericsson modules. |
| BCSP initialization fixes. |
| Support for role switch command (hcitool). |
| RFCOMM config file parser fixes. |
| Update man pages. |
| Removed GLib dependency. |
| |
| ver 2.2: |
| Support for voice settings (hciconfig). |
| Minor hcitool fixes. |
| Improved configure script. |
| Added Headset testing tool. |
| Updated man pages. |
| RPM package. |
| |
| ver 2.1: |
| Improved BCSP initialization (hciattach). |
| Support for displaying link quality (hcitool). |
| Support for changing link supervision timeout (hcitool). |
| New RFCOMM TTY configuration tool (rfcomm). |
| Minor fixes and updates. |
| |
| ver 2.0: |
| BCSP initialization (hciattach). |
| Minor hciconfig fixes. |
| |
| ver 2.0-pr13: |
| Support for multiple pairing modes. |
| Link key database handling fixes. |
| |
| ver 2.0-pre12: |
| Removed max link key limit. Keys never expire. |
| Link key database is always updated. Reread PIN on SIGHUP (hcid). |
| Bluetooth script starts SDPd, if installed. |
| Other minor fixes. |
| |
| ver 2.0-pre11: |
| Improved link key management and more verbose logging (hcid). |
| Fixed scan command (hcitool). |
| |
| ver 2.0-pre10: |
| Support for reading RSSI, remote name and changing |
| connection type (hcitool). |
| Device initialization fixes (hcid). |
| Other minor fixes and improvements. |
| Build environment cleanup and fixes. |
| |
| ver 2.0-pre9: |
| Improved bluepin. Working X authentication. |
| Improved hcitool. New flexible cmd syntax, additional commands. |
| Human readable display of the device features. |
| |
| ver 2.0-pre8: |
| Additional hciconfig commands. Support for ACL and SCO MTU ioctls. |
| Support for Inventel and COM1 UART based devices. |
| Minor hcitool fixes. |
| Improved l2test. New L2CAP test modes. |
| Minor cleanup. |
| |
| ver 2.0-pre7: |
| Bluetooth utilities is now a separate package. |
| New build environment uses automake. |
| Moved all config files and security data to /etc/bluetooth. |
| Various cleanups. |
| |
| Note: |
| Please move your /etc/hcid.conf to /etc/bluetooth |
| |
| ver 2.0-pre6: |
| Improved hcitool. |
| l2test minor output fixes. |
| hciattach opt to display list of supported devices. |
| |
| ver 2.0-pre2: |
| Additional HCI library functions. |
| Improved CSR baud rate initialization. |
| PCMCIA scripts fixes and enhancements. |
| Documentation update. |
| |
| ver 2.0-pre1: |
| New UART initialization utility. |
| Hot plugging support for UART based PCMCIA devices. |
| SCO testing utility. |
| New authentication utility (bluepin). |
| Minor fixes and improvements. |