| /* |
| * |
| * BlueZ - Bluetooth protocol stack for Linux |
| * |
| * Copyright (C) 2011-2017 Intel Corporation. All rights reserved. |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2.1 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| */ |
| |
| #ifdef HAVE_CONFIG_H |
| #include <config.h> |
| #endif |
| |
| #include <stdio.h> |
| #include <unistd.h> |
| #include <stdlib.h> |
| #include <assert.h> |
| #include <getopt.h> |
| |
| #include <ell/ell.h> |
| |
| #include "lib/bluetooth.h" |
| #include "src/shared/btp.h" |
| |
| #define AD_PATH "/org/bluez/advertising" |
| #define AG_PATH "/org/bluez/agent" |
| #define AD_IFACE "org.bluez.LEAdvertisement1" |
| #define AG_IFACE "org.bluez.Agent1" |
| |
| /* List of assigned numbers for advetising data and scan response */ |
| #define AD_TYPE_FLAGS 0x01 |
| #define AD_TYPE_INCOMPLETE_UUID16_SERVICE_LIST 0x02 |
| #define AD_TYPE_SHORT_NAME 0x08 |
| #define AD_TYPE_TX_POWER 0x0a |
| #define AD_TYPE_SOLICIT_UUID16_SERVICE_LIST 0x14 |
| #define AD_TYPE_SERVICE_DATA_UUID16 0x16 |
| #define AD_TYPE_APPEARANCE 0x19 |
| #define AD_TYPE_MANUFACTURER_DATA 0xff |
| |
| static void register_gap_service(void); |
| |
| static struct l_dbus *dbus; |
| |
| struct btp_adapter { |
| struct l_dbus_proxy *proxy; |
| struct l_dbus_proxy *ad_proxy; |
| uint8_t index; |
| uint32_t supported_settings; |
| uint32_t current_settings; |
| uint32_t default_settings; |
| struct l_queue *devices; |
| }; |
| |
| struct btp_device { |
| struct l_dbus_proxy *proxy; |
| uint8_t address_type; |
| bdaddr_t address; |
| }; |
| |
| static struct l_queue *adapters; |
| static char *socket_path; |
| static struct btp *btp; |
| |
| static bool gap_service_registered; |
| |
| struct ad_data { |
| uint8_t data[25]; |
| uint8_t len; |
| }; |
| |
| struct service_data { |
| char *uuid; |
| struct ad_data data; |
| }; |
| |
| struct manufacturer_data { |
| uint16_t id; |
| struct ad_data data; |
| }; |
| |
| static struct ad { |
| bool registered; |
| char *type; |
| char *local_name; |
| uint16_t local_appearance; |
| uint16_t duration; |
| uint16_t timeout; |
| struct l_queue *uuids; |
| struct l_queue *services; |
| struct l_queue *manufacturers; |
| struct l_queue *solicits; |
| bool tx_power; |
| bool name; |
| bool appearance; |
| } ad; |
| |
| static struct btp_agent { |
| bool registered; |
| struct l_dbus_proxy *proxy; |
| struct l_dbus_message *pending_req; |
| } ag; |
| |
| static char *dupuuid2str(const uint8_t *uuid, uint8_t len) |
| { |
| switch (len) { |
| case 16: |
| return l_strdup_printf("%hhx%hhx", uuid[0], uuid[1]); |
| case 128: |
| return l_strdup_printf("%hhx%hhx%hhx%hhx%hhx%hhx%hhx%hhx%hhx" |
| "%hhx%hhx%hhx%hhx%hhx%hhx%hhx", uuid[0], |
| uuid[1], uuid[2], uuid[3], uuid[4], |
| uuid[5], uuid[6], uuid[6], uuid[8], |
| uuid[7], uuid[10], uuid[11], uuid[12], |
| uuid[13], uuid[14], uuid[15]); |
| default: |
| return NULL; |
| } |
| } |
| |
| static bool match_dev_addr_type(const char *addr_type_str, uint8_t addr_type) |
| { |
| if (addr_type == BTP_GAP_ADDR_PUBLIC && strcmp(addr_type_str, "public")) |
| return false; |
| |
| if (addr_type == BTP_GAP_ADDR_RANDOM && strcmp(addr_type_str, "random")) |
| return false; |
| |
| return true; |
| } |
| |
| static struct btp_adapter *find_adapter_by_proxy(struct l_dbus_proxy *proxy) |
| { |
| const struct l_queue_entry *entry; |
| |
| for (entry = l_queue_get_entries(adapters); entry; |
| entry = entry->next) { |
| struct btp_adapter *adapter = entry->data; |
| |
| if (adapter->proxy == proxy) |
| return adapter; |
| } |
| |
| return NULL; |
| } |
| |
| static struct btp_adapter *find_adapter_by_index(uint8_t index) |
| { |
| const struct l_queue_entry *entry; |
| |
| for (entry = l_queue_get_entries(adapters); entry; |
| entry = entry->next) { |
| struct btp_adapter *adapter = entry->data; |
| |
| if (adapter->index == index) |
| return adapter; |
| } |
| |
| return NULL; |
| } |
| |
| static struct btp_adapter *find_adapter_by_path(const char *path) |
| { |
| const struct l_queue_entry *entry; |
| |
| for (entry = l_queue_get_entries(adapters); entry; |
| entry = entry->next) { |
| struct btp_adapter *adapter = entry->data; |
| |
| if (!strcmp(l_dbus_proxy_get_path(adapter->proxy), path)) |
| return adapter; |
| } |
| |
| return NULL; |
| } |
| |
| static struct btp_device *find_device_by_address(struct btp_adapter *adapter, |
| const bdaddr_t *addr, |
| uint8_t addr_type) |
| { |
| const struct l_queue_entry *entry; |
| const char *str; |
| char addr_str[18]; |
| |
| if (!ba2str(addr, addr_str)) |
| return NULL; |
| |
| for (entry = l_queue_get_entries(adapter->devices); entry; |
| entry = entry->next) { |
| struct btp_device *device = entry->data; |
| |
| l_dbus_proxy_get_property(device->proxy, "Address", "s", &str); |
| if (strcmp(str, addr_str)) |
| continue; |
| |
| l_dbus_proxy_get_property(device->proxy, "AddressType", "s", |
| &str); |
| if (match_dev_addr_type(str, addr_type)) |
| return device; |
| } |
| |
| return NULL; |
| } |
| |
| static bool match_device_paths(const void *device, const void *path) |
| { |
| const struct btp_device *dev = device; |
| |
| return !strcmp(l_dbus_proxy_get_path(dev->proxy), path); |
| } |
| |
| static struct btp_device *find_device_by_path(const char *path) |
| { |
| const struct l_queue_entry *entry; |
| struct btp_device *device; |
| |
| for (entry = l_queue_get_entries(adapters); entry; |
| entry = entry->next) { |
| struct btp_adapter *adapter = entry->data; |
| |
| device = l_queue_find(adapter->devices, match_device_paths, |
| path); |
| if (device) |
| return device; |
| } |
| |
| return NULL; |
| } |
| |
| static bool match_adapter_dev_proxy(const void *device, const void *proxy) |
| { |
| const struct btp_device *d = device; |
| |
| return d->proxy == proxy; |
| } |
| |
| static bool match_adapter_dev(const void *device_a, const void *device_b) |
| { |
| return device_a == device_b; |
| } |
| |
| static struct btp_adapter *find_adapter_by_device(struct btp_device *device) |
| { |
| const struct l_queue_entry *entry; |
| |
| for (entry = l_queue_get_entries(adapters); entry; |
| entry = entry->next) { |
| struct btp_adapter *adapter = entry->data; |
| |
| if (l_queue_find(adapter->devices, match_adapter_dev, device)) |
| return adapter; |
| } |
| |
| return NULL; |
| } |
| |
| static struct btp_device *find_device_by_proxy(struct l_dbus_proxy *proxy) |
| { |
| const struct l_queue_entry *entry; |
| struct btp_device *device; |
| |
| for (entry = l_queue_get_entries(adapters); entry; |
| entry = entry->next) { |
| struct btp_adapter *adapter = entry->data; |
| |
| device = l_queue_find(adapter->devices, match_adapter_dev_proxy, |
| proxy); |
| |
| if (device) |
| return device; |
| } |
| |
| return NULL; |
| } |
| |
| static void btp_gap_read_commands(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| uint16_t commands = 0; |
| |
| if (index != BTP_INDEX_NON_CONTROLLER) { |
| btp_send_error(btp, BTP_GAP_SERVICE, index, |
| BTP_ERROR_INVALID_INDEX); |
| return; |
| } |
| |
| commands |= (1 << BTP_OP_GAP_READ_SUPPORTED_COMMANDS); |
| commands |= (1 << BTP_OP_GAP_READ_CONTROLLER_INDEX_LIST); |
| commands |= (1 << BTP_OP_GAP_READ_COTROLLER_INFO); |
| commands |= (1 << BTP_OP_GAP_RESET); |
| commands |= (1 << BTP_OP_GAP_SET_POWERED); |
| commands |= (1 << BTP_OP_GAP_SET_CONNECTABLE); |
| commands |= (1 << BTP_OP_GAP_SET_DISCOVERABLE); |
| commands |= (1 << BTP_OP_GAP_SET_BONDABLE); |
| commands |= (1 << BTP_OP_GAP_START_ADVERTISING); |
| commands |= (1 << BTP_OP_GAP_STOP_ADVERTISING); |
| commands |= (1 << BTP_OP_GAP_START_DISCOVERY); |
| commands |= (1 << BTP_OP_GAP_STOP_DISCOVERY); |
| commands |= (1 << BTP_OP_GAP_CONNECT); |
| commands |= (1 << BTP_OP_GAP_DISCONNECT); |
| commands |= (1 << BTP_OP_GAP_SET_IO_CAPA); |
| commands |= (1 << BTP_OP_GAP_PAIR); |
| commands |= (1 << BTP_OP_GAP_UNPAIR); |
| |
| commands = L_CPU_TO_LE16(commands); |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_READ_SUPPORTED_COMMANDS, |
| BTP_INDEX_NON_CONTROLLER, sizeof(commands), &commands); |
| } |
| |
| static void btp_gap_read_controller_index(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| const struct l_queue_entry *entry; |
| struct btp_gap_read_index_rp *rp; |
| uint8_t cnt; |
| int i; |
| |
| if (index != BTP_INDEX_NON_CONTROLLER) { |
| btp_send_error(btp, BTP_GAP_SERVICE, index, |
| BTP_ERROR_INVALID_INDEX); |
| return; |
| } |
| |
| cnt = l_queue_length(adapters); |
| |
| rp = l_malloc(sizeof(*rp) + cnt); |
| |
| rp->num = cnt; |
| |
| for (i = 0, entry = l_queue_get_entries(adapters); entry; |
| i++, entry = entry->next) { |
| struct btp_adapter *adapter = entry->data; |
| |
| rp->indexes[i] = adapter->index; |
| } |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_READ_CONTROLLER_INDEX_LIST, |
| BTP_INDEX_NON_CONTROLLER, sizeof(*rp) + cnt, rp); |
| } |
| |
| static void btp_gap_read_info(uint8_t index, const void *param, uint16_t length, |
| void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| struct btp_gap_read_info_rp rp; |
| const char *str; |
| uint8_t status = BTP_ERROR_FAIL; |
| |
| if (!adapter) { |
| status = BTP_ERROR_INVALID_INDEX; |
| goto failed; |
| } |
| |
| memset(&rp, 0, sizeof(rp)); |
| |
| if (!l_dbus_proxy_get_property(adapter->proxy, "Address", "s", &str)) |
| goto failed; |
| |
| if (str2ba(str, &rp.address) < 0) |
| goto failed; |
| |
| if (!l_dbus_proxy_get_property(adapter->proxy, "Name", "s", &str)) { |
| goto failed; |
| } |
| |
| strncpy((char *) rp.name, str, sizeof(rp.name)); |
| strncpy((char *) rp.short_name, str, sizeof(rp.short_name)); |
| rp.supported_settings = L_CPU_TO_LE32(adapter->supported_settings); |
| rp.current_settings = L_CPU_TO_LE32(adapter->current_settings); |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_READ_COTROLLER_INFO, index, |
| sizeof(rp), &rp); |
| |
| return; |
| failed: |
| btp_send_error(btp, BTP_GAP_SERVICE, index, status); |
| } |
| |
| static void remove_device_setup(struct l_dbus_message *message, |
| void *user_data) |
| { |
| struct btp_device *device = user_data; |
| |
| l_dbus_message_set_arguments(message, "o", |
| l_dbus_proxy_get_path(device->proxy)); |
| } |
| |
| static void remove_device_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, |
| void *user_data) |
| { |
| struct btp_device *device = user_data; |
| struct btp_adapter *adapter = find_adapter_by_proxy(proxy); |
| |
| if (!adapter) |
| return; |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name; |
| |
| l_dbus_message_get_error(result, &name, NULL); |
| |
| l_error("Failed to remove device %s (%s)", |
| l_dbus_proxy_get_path(device->proxy), |
| name); |
| return; |
| } |
| |
| l_queue_remove(adapter->devices, device); |
| } |
| |
| static void unreg_advertising_setup(struct l_dbus_message *message, |
| void *user_data) |
| { |
| struct l_dbus_message_builder *builder; |
| |
| builder = l_dbus_message_builder_new(message); |
| l_dbus_message_builder_append_basic(builder, 'o', AD_PATH); |
| l_dbus_message_builder_finalize(builder); |
| l_dbus_message_builder_destroy(builder); |
| } |
| |
| static void ad_cleanup_service(void *service) |
| { |
| struct service_data *s = service; |
| |
| l_free(s->uuid); |
| l_free(s); |
| } |
| |
| static void ad_cleanup(void) |
| { |
| l_free(ad.local_name); |
| l_queue_destroy(ad.uuids, l_free); |
| l_queue_destroy(ad.services, ad_cleanup_service); |
| l_queue_destroy(ad.manufacturers, l_free); |
| l_queue_destroy(ad.solicits, l_free); |
| |
| memset(&ad, 0, sizeof(ad)); |
| } |
| |
| static void unreg_advertising_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, |
| void *user_data) |
| { |
| const char *path = l_dbus_proxy_get_path(proxy); |
| struct btp_adapter *adapter = find_adapter_by_path(path); |
| |
| if (!adapter) |
| return; |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name; |
| |
| l_dbus_message_get_error(result, &name, NULL); |
| |
| l_error("Failed to stop advertising %s (%s)", |
| l_dbus_proxy_get_path(proxy), name); |
| return; |
| } |
| |
| if (!l_dbus_object_remove_interface(dbus, AD_PATH, AD_IFACE)) |
| l_info("Unable to remove ad instance"); |
| if (!l_dbus_object_remove_interface(dbus, AD_PATH, |
| L_DBUS_INTERFACE_PROPERTIES)) |
| l_info("Unable to remove propety instance"); |
| if (!l_dbus_unregister_interface(dbus, AD_IFACE)) |
| l_info("Unable to unregister ad interface"); |
| |
| ad_cleanup(); |
| } |
| |
| static void unreg_agent_setup(struct l_dbus_message *message, void *user_data) |
| { |
| struct l_dbus_message_builder *builder; |
| |
| builder = l_dbus_message_builder_new(message); |
| |
| l_dbus_message_builder_append_basic(builder, 'o', AG_PATH); |
| |
| l_dbus_message_builder_finalize(builder); |
| l_dbus_message_builder_destroy(builder); |
| } |
| |
| static void reset_unreg_agent_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, |
| void *user_data) |
| { |
| if (l_dbus_message_is_error(result)) { |
| const char *name; |
| |
| l_dbus_message_get_error(result, &name, NULL); |
| |
| l_error("Failed to unregister agent %s (%s)", |
| l_dbus_proxy_get_path(proxy), name); |
| return; |
| } |
| |
| if (!l_dbus_object_remove_interface(dbus, AG_PATH, |
| L_DBUS_INTERFACE_PROPERTIES)) |
| l_info("Unable to remove propety instance"); |
| if (!l_dbus_object_remove_interface(dbus, AG_PATH, AG_IFACE)) |
| l_info("Unable to remove agent instance"); |
| if (!l_dbus_unregister_interface(dbus, AG_IFACE)) |
| l_info("Unable to unregister agent interface"); |
| |
| ag.registered = false; |
| } |
| |
| static void btp_gap_reset(uint8_t index, const void *param, uint16_t length, |
| void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| const struct l_queue_entry *entry; |
| uint8_t status; |
| bool prop; |
| |
| if (!adapter) { |
| status = BTP_ERROR_INVALID_INDEX; |
| goto failed; |
| } |
| |
| /* Adapter needs to be powered to be able to remove devices */ |
| if (!l_dbus_proxy_get_property(adapter->proxy, "Powered", "b", &prop) || |
| !prop) { |
| status = BTP_ERROR_FAIL; |
| goto failed; |
| } |
| |
| for (entry = l_queue_get_entries(adapter->devices); entry; |
| entry = entry->next) { |
| struct btp_device *device = entry->data; |
| |
| l_dbus_proxy_method_call(adapter->proxy, "RemoveDevice", |
| remove_device_setup, |
| remove_device_reply, device, |
| NULL); |
| } |
| |
| if (adapter->ad_proxy && ad.registered) |
| if (!l_dbus_proxy_method_call(adapter->ad_proxy, |
| "UnregisterAdvertisement", |
| unreg_advertising_setup, |
| unreg_advertising_reply, |
| NULL, NULL)) { |
| status = BTP_ERROR_FAIL; |
| goto failed; |
| } |
| |
| if (ag.proxy && ag.registered) |
| if (!l_dbus_proxy_method_call(ag.proxy, "UnregisterAgent", |
| unreg_agent_setup, |
| reset_unreg_agent_reply, |
| NULL, NULL)) { |
| status = BTP_ERROR_FAIL; |
| goto failed; |
| } |
| |
| adapter->current_settings = adapter->default_settings; |
| |
| /* TODO for we assume all went well */ |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_RESET, index, 0, NULL); |
| return; |
| |
| failed: |
| btp_send_error(btp, BTP_GAP_SERVICE, index, status); |
| } |
| |
| struct set_setting_data { |
| struct btp_adapter *adapter; |
| uint8_t opcode; |
| uint32_t setting; |
| bool value; |
| }; |
| |
| static void set_setting_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, void *user_data) |
| { |
| struct set_setting_data *data = user_data; |
| struct btp_adapter *adapter = data->adapter; |
| uint32_t settings; |
| |
| if (l_dbus_message_is_error(result)) { |
| btp_send_error(btp, BTP_GAP_SERVICE, data->adapter->index, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| if (data->value) |
| adapter->current_settings |= data->setting; |
| else |
| adapter->current_settings &= ~data->setting; |
| |
| settings = L_CPU_TO_LE32(adapter->current_settings); |
| |
| btp_send(btp, BTP_GAP_SERVICE, data->opcode, adapter->index, |
| sizeof(settings), &settings); |
| } |
| |
| static void btp_gap_set_powered(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| const struct btp_gap_set_powered_cp *cp = param; |
| uint8_t status = BTP_ERROR_FAIL; |
| struct set_setting_data *data; |
| |
| if (length < sizeof(*cp)) |
| goto failed; |
| |
| if (!adapter) { |
| status = BTP_ERROR_INVALID_INDEX; |
| goto failed; |
| } |
| |
| data = l_new(struct set_setting_data, 1); |
| data->adapter = adapter; |
| data->opcode = BTP_OP_GAP_SET_POWERED; |
| data->setting = BTP_GAP_SETTING_POWERED; |
| data->value = cp->powered; |
| |
| if (l_dbus_proxy_set_property(adapter->proxy, set_setting_reply, |
| data, l_free, "Powered", "b", |
| data->value)) |
| return; |
| |
| l_free(data); |
| |
| failed: |
| btp_send_error(btp, BTP_GAP_SERVICE, index, status); |
| } |
| |
| static void update_current_settings(struct btp_adapter *adapter, |
| uint32_t new_settings) |
| { |
| struct btp_new_settings_ev ev; |
| |
| adapter->current_settings = new_settings; |
| |
| ev.current_settings = L_CPU_TO_LE32(adapter->current_settings); |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_EV_GAP_NEW_SETTINGS, adapter->index, |
| sizeof(ev), &ev); |
| } |
| |
| static void btp_gap_set_connectable(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| const struct btp_gap_set_connectable_cp *cp = param; |
| uint8_t status = BTP_ERROR_FAIL; |
| uint32_t new_settings; |
| |
| if (length < sizeof(*cp)) |
| goto failed; |
| |
| if (!adapter) { |
| status = BTP_ERROR_INVALID_INDEX; |
| goto failed; |
| } |
| |
| new_settings = adapter->current_settings; |
| |
| if (cp->connectable) |
| new_settings |= BTP_GAP_SETTING_CONNECTABLE; |
| else |
| new_settings &= ~BTP_GAP_SETTING_CONNECTABLE; |
| |
| update_current_settings(adapter, new_settings); |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_SET_CONNECTABLE, index, |
| sizeof(new_settings), &new_settings); |
| |
| return; |
| |
| failed: |
| btp_send_error(btp, BTP_GAP_SERVICE, index, status); |
| } |
| |
| static void btp_gap_set_discoverable(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| const struct btp_gap_set_discoverable_cp *cp = param; |
| uint8_t status = BTP_ERROR_FAIL; |
| struct set_setting_data *data; |
| |
| if (length < sizeof(*cp)) |
| goto failed; |
| |
| if (!adapter) { |
| status = BTP_ERROR_INVALID_INDEX; |
| goto failed; |
| } |
| |
| data = l_new(struct set_setting_data, 1); |
| data->adapter = adapter; |
| data->opcode = BTP_OP_GAP_SET_DISCOVERABLE; |
| data->setting = BTP_GAP_SETTING_DISCOVERABLE; |
| data->value = cp->discoverable; |
| |
| if (l_dbus_proxy_set_property(adapter->proxy, set_setting_reply, |
| data, l_free, "Discoverable", "b", |
| data->value)) |
| return; |
| |
| l_free(data); |
| |
| failed: |
| btp_send_error(btp, BTP_GAP_SERVICE, index, status); |
| } |
| |
| static void btp_gap_set_bondable(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| const struct btp_gap_set_bondable_cp *cp = param; |
| uint8_t status = BTP_ERROR_FAIL; |
| struct set_setting_data *data; |
| |
| if (length < sizeof(*cp)) |
| goto failed; |
| |
| if (!adapter) { |
| status = BTP_ERROR_INVALID_INDEX; |
| goto failed; |
| } |
| |
| data = l_new(struct set_setting_data, 1); |
| data->adapter = adapter; |
| data->opcode = BTP_OP_GAP_SET_BONDABLE; |
| data->setting = BTP_GAP_SETTING_BONDABLE; |
| data->value = cp->bondable; |
| |
| if (l_dbus_proxy_set_property(adapter->proxy, set_setting_reply, |
| data, l_free, "Pairable", "b", |
| data->value)) |
| return; |
| |
| l_free(data); |
| |
| failed: |
| btp_send_error(btp, BTP_GAP_SERVICE, index, status); |
| } |
| |
| static void ad_init(void) |
| { |
| ad.uuids = l_queue_new(); |
| ad.services = l_queue_new(); |
| ad.manufacturers = l_queue_new(); |
| ad.solicits = l_queue_new(); |
| |
| ad.local_appearance = UINT16_MAX; |
| } |
| |
| static struct l_dbus_message *ad_release_call(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| void *user_data) |
| { |
| struct l_dbus_message *reply; |
| |
| l_dbus_unregister_object(dbus, AD_PATH); |
| l_dbus_unregister_interface(dbus, AD_IFACE); |
| |
| reply = l_dbus_message_new_method_return(message); |
| l_dbus_message_set_arguments(reply, ""); |
| |
| ad_cleanup(); |
| |
| return reply; |
| } |
| |
| static bool ad_type_getter(struct l_dbus *dbus, struct l_dbus_message *message, |
| struct l_dbus_message_builder *builder, |
| void *user_data) |
| { |
| l_dbus_message_builder_append_basic(builder, 's', ad.type); |
| |
| return true; |
| } |
| |
| static bool ad_serviceuuids_getter(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| struct l_dbus_message_builder *builder, |
| void *user_data) |
| { |
| const struct l_queue_entry *entry; |
| |
| if (l_queue_isempty(ad.uuids)) |
| return false; |
| |
| l_dbus_message_builder_enter_array(builder, "s"); |
| |
| for (entry = l_queue_get_entries(ad.uuids); entry; entry = entry->next) |
| l_dbus_message_builder_append_basic(builder, 's', entry->data); |
| |
| l_dbus_message_builder_leave_array(builder); |
| |
| return true; |
| } |
| |
| static bool ad_servicedata_getter(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| struct l_dbus_message_builder *builder, |
| void *user_data) |
| { |
| const struct l_queue_entry *entry; |
| size_t i; |
| |
| if (l_queue_isempty(ad.services)) |
| return false; |
| |
| l_dbus_message_builder_enter_array(builder, "{sv}"); |
| |
| for (entry = l_queue_get_entries(ad.services); entry; |
| entry = entry->next) { |
| struct service_data *sd = entry->data; |
| |
| l_dbus_message_builder_enter_dict(builder, "sv"); |
| l_dbus_message_builder_append_basic(builder, 's', sd->uuid); |
| l_dbus_message_builder_enter_variant(builder, "ay"); |
| l_dbus_message_builder_enter_array(builder, "y"); |
| |
| for (i = 0; i < sd->data.len; i++) |
| l_dbus_message_builder_append_basic(builder, 'y', |
| &(sd->data.data[i])); |
| |
| l_dbus_message_builder_leave_array(builder); |
| l_dbus_message_builder_leave_variant(builder); |
| l_dbus_message_builder_leave_dict(builder); |
| } |
| l_dbus_message_builder_leave_array(builder); |
| |
| return true; |
| } |
| |
| static bool ad_manufacturerdata_getter(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| struct l_dbus_message_builder *builder, |
| void *user_data) |
| { |
| const struct l_queue_entry *entry; |
| size_t i; |
| |
| if (l_queue_isempty(ad.manufacturers)) |
| return false; |
| |
| l_dbus_message_builder_enter_array(builder, "{qv}"); |
| |
| for (entry = l_queue_get_entries(ad.manufacturers); entry; |
| entry = entry->next) { |
| struct manufacturer_data *md = entry->data; |
| |
| l_dbus_message_builder_enter_dict(builder, "qv"); |
| l_dbus_message_builder_append_basic(builder, 'q', &md->id); |
| l_dbus_message_builder_enter_variant(builder, "ay"); |
| l_dbus_message_builder_enter_array(builder, "y"); |
| |
| for (i = 0; i < md->data.len; i++) |
| l_dbus_message_builder_append_basic(builder, 'y', |
| &(md->data.data[i])); |
| |
| l_dbus_message_builder_leave_array(builder); |
| l_dbus_message_builder_leave_variant(builder); |
| l_dbus_message_builder_leave_dict(builder); |
| } |
| l_dbus_message_builder_leave_array(builder); |
| |
| return true; |
| } |
| |
| static bool ad_solicituuids_getter(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| struct l_dbus_message_builder *builder, |
| void *user_data) |
| { |
| const struct l_queue_entry *entry; |
| |
| if (l_queue_isempty(ad.solicits)) |
| return false; |
| |
| l_dbus_message_builder_enter_array(builder, "s"); |
| |
| for (entry = l_queue_get_entries(ad.solicits); entry; |
| entry = entry->next) |
| l_dbus_message_builder_append_basic(builder, 's', entry->data); |
| |
| l_dbus_message_builder_leave_array(builder); |
| |
| return true; |
| } |
| |
| static bool ad_includes_getter(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| struct l_dbus_message_builder *builder, |
| void *user_data) |
| { |
| l_dbus_message_builder_enter_array(builder, "s"); |
| |
| if (!(ad.tx_power || ad.name || ad.appearance)) |
| return false; |
| |
| if (ad.tx_power) { |
| const char *str = "tx-power"; |
| |
| l_dbus_message_builder_append_basic(builder, 's', str); |
| } |
| |
| if (ad.name) { |
| const char *str = "local-name"; |
| |
| l_dbus_message_builder_append_basic(builder, 's', str); |
| } |
| |
| if (ad.appearance) { |
| const char *str = "appearance"; |
| |
| l_dbus_message_builder_append_basic(builder, 's', str); |
| } |
| |
| l_dbus_message_builder_leave_array(builder); |
| |
| return true; |
| } |
| |
| static bool ad_localname_getter(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| struct l_dbus_message_builder *builder, |
| void *user_data) |
| { |
| if (!ad.local_name) |
| return false; |
| |
| l_dbus_message_builder_append_basic(builder, 's', ad.local_name); |
| |
| return true; |
| } |
| |
| static bool ad_appearance_getter(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| struct l_dbus_message_builder *builder, |
| void *user_data) |
| { |
| if (!ad.local_appearance) |
| return false; |
| |
| l_dbus_message_builder_append_basic(builder, 'q', &ad.local_appearance); |
| |
| return true; |
| } |
| |
| static bool ad_duration_getter(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| struct l_dbus_message_builder *builder, |
| void *user_data) |
| { |
| if (!ad.duration) |
| return false; |
| |
| l_dbus_message_builder_append_basic(builder, 'q', &ad.duration); |
| |
| return true; |
| } |
| |
| static bool ad_timeout_getter(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| struct l_dbus_message_builder *builder, |
| void *user_data) |
| { |
| if (!ad.timeout) |
| return false; |
| |
| l_dbus_message_builder_append_basic(builder, 'q', &ad.timeout); |
| |
| return true; |
| } |
| |
| static void setup_ad_interface(struct l_dbus_interface *interface) |
| { |
| l_dbus_interface_method(interface, "Release", |
| L_DBUS_METHOD_FLAG_NOREPLY, |
| ad_release_call, "", ""); |
| l_dbus_interface_property(interface, "Type", 0, "s", ad_type_getter, |
| NULL); |
| l_dbus_interface_property(interface, "ServiceUUIDs", 0, "as", |
| ad_serviceuuids_getter, NULL); |
| l_dbus_interface_property(interface, "ServiceData", 0, "a{sv}", |
| ad_servicedata_getter, NULL); |
| l_dbus_interface_property(interface, "ManufacturerData", 0, |
| "a{qv}", ad_manufacturerdata_getter, |
| NULL); |
| l_dbus_interface_property(interface, "SolicitUUIDs", 0, "as", |
| ad_solicituuids_getter, NULL); |
| l_dbus_interface_property(interface, "Includes", 0, "as", |
| ad_includes_getter, NULL); |
| l_dbus_interface_property(interface, "LocalName", 0, "s", |
| ad_localname_getter, NULL); |
| l_dbus_interface_property(interface, "Appearance", 0, "q", |
| ad_appearance_getter, NULL); |
| l_dbus_interface_property(interface, "Duration", 0, "q", |
| ad_duration_getter, NULL); |
| l_dbus_interface_property(interface, "Timeout", 0, "q", |
| ad_timeout_getter, NULL); |
| } |
| |
| static void start_advertising_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, |
| void *user_data) |
| { |
| const char *path = l_dbus_proxy_get_path(proxy); |
| struct btp_adapter *adapter = find_adapter_by_path(path); |
| uint32_t new_settings; |
| |
| if (!adapter) { |
| btp_send_error(btp, BTP_GAP_SERVICE, BTP_INDEX_NON_CONTROLLER, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name, *desc; |
| |
| l_dbus_message_get_error(result, &name, &desc); |
| l_error("Failed to start advertising (%s), %s", name, desc); |
| |
| btp_send_error(btp, BTP_GAP_SERVICE, adapter->index, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| new_settings = adapter->current_settings; |
| new_settings |= BTP_GAP_SETTING_ADVERTISING; |
| update_current_settings(adapter, new_settings); |
| |
| ad.registered = true; |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_START_ADVERTISING, |
| adapter->index, sizeof(new_settings), |
| &new_settings); |
| } |
| |
| static void create_advertising_data(uint8_t adv_data_len, const uint8_t *data) |
| { |
| const uint8_t *ad_data; |
| uint8_t ad_type, ad_len; |
| uint8_t remaining_data_len = adv_data_len; |
| |
| while (remaining_data_len) { |
| ad_type = data[adv_data_len - remaining_data_len]; |
| ad_len = data[adv_data_len - remaining_data_len + 1]; |
| ad_data = &data[adv_data_len - remaining_data_len + 2]; |
| |
| switch (ad_type) { |
| case AD_TYPE_INCOMPLETE_UUID16_SERVICE_LIST: |
| { |
| char *uuid = dupuuid2str(ad_data, 16); |
| |
| l_queue_push_tail(ad.uuids, uuid); |
| |
| break; |
| } |
| case AD_TYPE_SHORT_NAME: |
| ad.local_name = malloc(ad_len + 1); |
| memcpy(ad.local_name, ad_data, ad_len); |
| ad.local_name[ad_len] = '\0'; |
| |
| break; |
| case AD_TYPE_TX_POWER: |
| ad.tx_power = true; |
| |
| /* XXX Value is ommited cause, stack fills it */ |
| |
| break; |
| case AD_TYPE_SERVICE_DATA_UUID16: |
| { |
| struct service_data *sd; |
| |
| sd = l_new(struct service_data, 1); |
| sd->uuid = dupuuid2str(ad_data, 16); |
| sd->data.len = ad_len - 2; |
| memcpy(sd->data.data, ad_data + 2, sd->data.len); |
| |
| l_queue_push_tail(ad.services, sd); |
| |
| break; |
| } |
| case AD_TYPE_APPEARANCE: |
| memcpy(&ad.local_appearance, ad_data, ad_len); |
| |
| break; |
| case AD_TYPE_MANUFACTURER_DATA: |
| { |
| struct manufacturer_data *md; |
| |
| md = l_new(struct manufacturer_data, 1); |
| /* The first 2 octets contain the Company Identifier |
| * Code followed by additional manufacturer specific |
| * data. |
| */ |
| memcpy(&md->id, ad_data, 2); |
| md->data.len = ad_len - 2; |
| memcpy(md->data.data, ad_data + 2, md->data.len); |
| |
| l_queue_push_tail(ad.manufacturers, md); |
| |
| break; |
| } |
| case AD_TYPE_SOLICIT_UUID16_SERVICE_LIST: |
| { |
| char *uuid = dupuuid2str(ad_data, 16); |
| |
| l_queue_push_tail(ad.solicits, uuid); |
| |
| break; |
| } |
| default: |
| l_info("Unsupported advertising data type"); |
| |
| break; |
| } |
| /* Advertising entity data len + advertising entity header |
| * (type, len) |
| */ |
| remaining_data_len -= ad_len + 2; |
| } |
| } |
| |
| static void create_scan_response(uint8_t scan_rsp_len, const uint8_t *data) |
| { |
| /* TODO */ |
| } |
| |
| static void start_advertising_setup(struct l_dbus_message *message, |
| void *user_data) |
| { |
| struct l_dbus_message_builder *builder; |
| |
| builder = l_dbus_message_builder_new(message); |
| l_dbus_message_builder_append_basic(builder, 'o', AD_PATH); |
| l_dbus_message_builder_enter_array(builder, "{sv}"); |
| l_dbus_message_builder_enter_dict(builder, "sv"); |
| l_dbus_message_builder_leave_dict(builder); |
| l_dbus_message_builder_leave_array(builder); |
| l_dbus_message_builder_finalize(builder); |
| l_dbus_message_builder_destroy(builder); |
| } |
| |
| static void btp_gap_start_advertising(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| const struct btp_gap_start_adv_cp *cp = param; |
| uint8_t status = BTP_ERROR_FAIL; |
| bool prop; |
| |
| if (!adapter) { |
| status = BTP_ERROR_INVALID_INDEX; |
| goto failed; |
| } |
| |
| /* Adapter needs to be powered to be able to advertise */ |
| if (!l_dbus_proxy_get_property(adapter->proxy, "Powered", "b", &prop) || |
| !prop || ad.registered) |
| goto failed; |
| |
| if (!l_dbus_register_interface(dbus, AD_IFACE, setup_ad_interface, NULL, |
| false)) { |
| l_info("Unable to register ad interface"); |
| goto failed; |
| } |
| |
| if (!l_dbus_object_add_interface(dbus, AD_PATH, AD_IFACE, NULL)) { |
| l_info("Unable to instantiate ad interface"); |
| |
| if (!l_dbus_unregister_interface(dbus, AD_IFACE)) |
| l_info("Unable to unregister ad interface"); |
| |
| goto failed; |
| } |
| |
| if (!l_dbus_object_add_interface(dbus, AD_PATH, |
| L_DBUS_INTERFACE_PROPERTIES, |
| NULL)) { |
| l_info("Unable to instantiate the properties interface"); |
| |
| if (!l_dbus_object_remove_interface(dbus, AD_PATH, AD_IFACE)) |
| l_info("Unable to remove ad instance"); |
| if (!l_dbus_unregister_interface(dbus, AD_IFACE)) |
| l_info("Unable to unregister ad interface"); |
| |
| goto failed; |
| } |
| |
| ad_init(); |
| |
| if (adapter->current_settings & BTP_GAP_SETTING_CONNECTABLE) |
| ad.type = "peripheral"; |
| else |
| ad.type = "broadcast"; |
| |
| if (cp->adv_data_len > 0) |
| create_advertising_data(cp->adv_data_len, cp->data); |
| if (cp->scan_rsp_len > 0) |
| create_scan_response(cp->scan_rsp_len, |
| cp->data + cp->scan_rsp_len); |
| |
| if (!l_dbus_proxy_method_call(adapter->ad_proxy, |
| "RegisterAdvertisement", |
| start_advertising_setup, |
| start_advertising_reply, |
| NULL, NULL)) { |
| if (!l_dbus_object_remove_interface(dbus, AD_PATH, AD_IFACE)) |
| l_info("Unable to remove ad instance"); |
| if (!l_dbus_unregister_interface(dbus, AD_IFACE)) |
| l_info("Unable to unregister ad interface"); |
| |
| goto failed; |
| } |
| |
| return; |
| |
| failed: |
| btp_send_error(btp, BTP_GAP_SERVICE, index, status); |
| } |
| |
| static void stop_advertising_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, |
| void *user_data) |
| { |
| const char *path = l_dbus_proxy_get_path(proxy); |
| struct btp_adapter *adapter = find_adapter_by_path(path); |
| uint32_t new_settings; |
| |
| if (!adapter) |
| return; |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name; |
| |
| l_dbus_message_get_error(result, &name, NULL); |
| |
| l_error("Failed to stop advertising %s (%s)", |
| l_dbus_proxy_get_path(proxy), name); |
| return; |
| } |
| |
| if (!l_dbus_object_remove_interface(dbus, AD_PATH, AD_IFACE)) |
| l_info("Unable to remove ad instance"); |
| if (!l_dbus_object_remove_interface(dbus, AD_PATH, |
| L_DBUS_INTERFACE_PROPERTIES)) |
| l_info("Unable to remove propety instance"); |
| if (!l_dbus_unregister_interface(dbus, AD_IFACE)) |
| l_info("Unable to unregister ad interface"); |
| |
| new_settings = adapter->current_settings; |
| new_settings &= ~BTP_GAP_SETTING_ADVERTISING; |
| update_current_settings(adapter, new_settings); |
| |
| ad_cleanup(); |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_STOP_ADVERTISING, |
| adapter->index, sizeof(new_settings), |
| &new_settings); |
| } |
| |
| static void btp_gap_stop_advertising(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| uint8_t status = BTP_ERROR_FAIL; |
| bool prop; |
| |
| if (!adapter) { |
| status = BTP_ERROR_INVALID_INDEX; |
| goto failed; |
| } |
| |
| if (!l_dbus_proxy_get_property(adapter->proxy, "Powered", "b", &prop) || |
| !prop || !adapter->ad_proxy || !ad.registered) |
| goto failed; |
| |
| if (!l_dbus_proxy_method_call(adapter->ad_proxy, |
| "UnregisterAdvertisement", |
| unreg_advertising_setup, |
| stop_advertising_reply, |
| NULL, NULL)) |
| goto failed; |
| |
| return; |
| |
| failed: |
| btp_send_error(btp, BTP_GAP_SERVICE, index, status); |
| } |
| |
| static void start_discovery_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, |
| void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_proxy(proxy); |
| |
| if (!adapter) { |
| btp_send_error(btp, BTP_GAP_SERVICE, BTP_INDEX_NON_CONTROLLER, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name, *desc; |
| |
| l_dbus_message_get_error(result, &name, &desc); |
| l_error("Failed to start discovery (%s), %s", name, desc); |
| |
| btp_send_error(btp, BTP_GAP_SERVICE, adapter->index, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_START_DISCOVERY, |
| adapter->index, 0, NULL); |
| } |
| |
| static void set_discovery_filter_setup(struct l_dbus_message *message, |
| void *user_data) |
| { |
| uint8_t flags = L_PTR_TO_UINT(user_data); |
| struct l_dbus_message_builder *builder; |
| |
| if (!(flags & (BTP_GAP_DISCOVERY_FLAG_LE | |
| BTP_GAP_DISCOVERY_FLAG_BREDR))) { |
| l_info("Failed to start discovery - no transport set"); |
| return; |
| } |
| |
| builder = l_dbus_message_builder_new(message); |
| |
| l_dbus_message_builder_enter_array(builder, "{sv}"); |
| l_dbus_message_builder_enter_dict(builder, "sv"); |
| |
| /* Be in observer mode or in general mode (default in Bluez) */ |
| if (flags & BTP_GAP_DISCOVERY_FLAG_OBSERVATION) { |
| l_dbus_message_builder_append_basic(builder, 's', "Transport"); |
| l_dbus_message_builder_enter_variant(builder, "s"); |
| |
| if (flags & (BTP_GAP_DISCOVERY_FLAG_LE | |
| BTP_GAP_DISCOVERY_FLAG_BREDR)) |
| l_dbus_message_builder_append_basic(builder, 's', |
| "auto"); |
| else if (flags & BTP_GAP_DISCOVERY_FLAG_LE) |
| l_dbus_message_builder_append_basic(builder, 's', "le"); |
| else if (flags & BTP_GAP_DISCOVERY_FLAG_BREDR) |
| l_dbus_message_builder_append_basic(builder, 's', |
| "bredr"); |
| |
| l_dbus_message_builder_leave_variant(builder); |
| } |
| |
| l_dbus_message_builder_leave_dict(builder); |
| l_dbus_message_builder_leave_array(builder); |
| |
| /* TODO add passive, limited discovery */ |
| l_dbus_message_builder_finalize(builder); |
| l_dbus_message_builder_destroy(builder); |
| } |
| |
| static void set_discovery_filter_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, |
| void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_proxy(proxy); |
| |
| if (!adapter) { |
| btp_send_error(btp, BTP_GAP_SERVICE, BTP_INDEX_NON_CONTROLLER, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name, *desc; |
| |
| l_dbus_message_get_error(result, &name, &desc); |
| l_error("Failed to set discovery filter (%s), %s", name, desc); |
| |
| btp_send_error(btp, BTP_GAP_SERVICE, adapter->index, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| l_dbus_proxy_method_call(adapter->proxy, "StartDiscovery", NULL, |
| start_discovery_reply, NULL, NULL); |
| } |
| |
| static void btp_gap_start_discovery(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| const struct btp_gap_start_discovery_cp *cp = param; |
| bool prop; |
| |
| if (!adapter) { |
| btp_send_error(btp, BTP_GAP_SERVICE, index, |
| BTP_ERROR_INVALID_INDEX); |
| return; |
| } |
| |
| /* Adapter needs to be powered to start discovery */ |
| if (!l_dbus_proxy_get_property(adapter->proxy, "Powered", "b", &prop) || |
| !prop) { |
| btp_send_error(btp, BTP_GAP_SERVICE, index, BTP_ERROR_FAIL); |
| return; |
| } |
| |
| l_dbus_proxy_method_call(adapter->proxy, "SetDiscoveryFilter", |
| set_discovery_filter_setup, |
| set_discovery_filter_reply, |
| L_UINT_TO_PTR(cp->flags), NULL); |
| } |
| |
| static void clear_discovery_filter_setup(struct l_dbus_message *message, |
| void *user_data) |
| { |
| struct l_dbus_message_builder *builder; |
| |
| builder = l_dbus_message_builder_new(message); |
| |
| /* Clear discovery filter setup */ |
| l_dbus_message_builder_enter_array(builder, "{sv}"); |
| l_dbus_message_builder_enter_dict(builder, "sv"); |
| l_dbus_message_builder_leave_dict(builder); |
| l_dbus_message_builder_leave_array(builder); |
| l_dbus_message_builder_finalize(builder); |
| l_dbus_message_builder_destroy(builder); |
| } |
| |
| static void clear_discovery_filter_reaply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, |
| void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_proxy(proxy); |
| |
| if (!adapter) { |
| btp_send_error(btp, BTP_GAP_SERVICE, BTP_INDEX_NON_CONTROLLER, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name, *desc; |
| |
| l_dbus_message_get_error(result, &name, &desc); |
| l_error("Failed to set discovery filter (%s), %s", name, desc); |
| |
| btp_send_error(btp, BTP_GAP_SERVICE, adapter->index, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_STOP_DISCOVERY, |
| adapter->index, 0, NULL); |
| } |
| |
| static void stop_discovery_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, |
| void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_proxy(proxy); |
| |
| if (!adapter) { |
| btp_send_error(btp, BTP_GAP_SERVICE, BTP_INDEX_NON_CONTROLLER, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name; |
| |
| l_dbus_message_get_error(result, &name, NULL); |
| l_error("Failed to stop discovery (%s)", name); |
| |
| btp_send_error(btp, BTP_GAP_SERVICE, adapter->index, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| l_dbus_proxy_method_call(adapter->proxy, "SetDiscoveryFilter", |
| clear_discovery_filter_setup, |
| clear_discovery_filter_reaply, |
| NULL, NULL); |
| } |
| |
| static void btp_gap_stop_discovery(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| bool prop; |
| |
| if (!adapter) { |
| btp_send_error(btp, BTP_GAP_SERVICE, index, |
| BTP_ERROR_INVALID_INDEX); |
| return; |
| } |
| |
| /* Adapter needs to be powered to be able to remove devices */ |
| if (!l_dbus_proxy_get_property(adapter->proxy, "Powered", "b", &prop) || |
| !prop) { |
| btp_send_error(btp, BTP_GAP_SERVICE, index, BTP_ERROR_FAIL); |
| return; |
| } |
| |
| l_dbus_proxy_method_call(adapter->proxy, "StopDiscovery", NULL, |
| stop_discovery_reply, NULL, NULL); |
| } |
| |
| static void connect_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, void *user_data) |
| { |
| uint8_t adapter_index = L_PTR_TO_UINT(user_data); |
| struct btp_adapter *adapter = find_adapter_by_index(adapter_index); |
| |
| if (!adapter) { |
| btp_send_error(btp, BTP_GAP_SERVICE, BTP_INDEX_NON_CONTROLLER, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name, *desc; |
| |
| l_dbus_message_get_error(result, &name, &desc); |
| l_error("Failed to connect (%s), %s", name, desc); |
| |
| btp_send_error(btp, BTP_GAP_SERVICE, adapter_index, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_CONNECT, adapter_index, 0, |
| NULL); |
| } |
| |
| struct connect_device_data { |
| bdaddr_t addr; |
| uint8_t addr_type; |
| }; |
| |
| static void connect_device_destroy(void *connect_device_data) |
| { |
| l_free(connect_device_data); |
| } |
| |
| static void connect_device_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, |
| void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_proxy(proxy); |
| |
| if (!adapter) { |
| btp_send_error(btp, BTP_GAP_SERVICE, BTP_INDEX_NON_CONTROLLER, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name, *desc; |
| |
| l_dbus_message_get_error(result, &name, &desc); |
| l_error("Failed to connect device (%s), %s", name, desc); |
| |
| return; |
| } |
| } |
| |
| static void connect_device_setup(struct l_dbus_message *message, |
| void *user_data) |
| { |
| struct connect_device_data *cdd = user_data; |
| struct l_dbus_message_builder *builder; |
| char str_addr[18]; |
| |
| ba2str(&cdd->addr, str_addr); |
| |
| builder = l_dbus_message_builder_new(message); |
| |
| l_dbus_message_builder_enter_array(builder, "{sv}"); |
| |
| l_dbus_message_builder_enter_dict(builder, "sv"); |
| l_dbus_message_builder_append_basic(builder, 's', "Address"); |
| l_dbus_message_builder_enter_variant(builder, "s"); |
| l_dbus_message_builder_append_basic(builder, 's', str_addr); |
| l_dbus_message_builder_leave_variant(builder); |
| l_dbus_message_builder_leave_dict(builder); |
| |
| l_dbus_message_builder_enter_dict(builder, "sv"); |
| l_dbus_message_builder_append_basic(builder, 's', "AddressType"); |
| l_dbus_message_builder_enter_variant(builder, "s"); |
| if (cdd->addr_type == BTP_GAP_ADDR_RANDOM) |
| l_dbus_message_builder_append_basic(builder, 's', "random"); |
| else |
| l_dbus_message_builder_append_basic(builder, 's', "public"); |
| l_dbus_message_builder_leave_variant(builder); |
| l_dbus_message_builder_leave_dict(builder); |
| |
| l_dbus_message_builder_leave_array(builder); |
| |
| l_dbus_message_builder_finalize(builder); |
| l_dbus_message_builder_destroy(builder); |
| } |
| |
| static void btp_gap_connect(uint8_t index, const void *param, uint16_t length, |
| void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| const struct btp_gap_connect_cp *cp = param; |
| struct btp_device *device; |
| struct connect_device_data *cdd; |
| bool prop; |
| uint8_t status = BTP_ERROR_FAIL; |
| |
| if (!adapter) { |
| status = BTP_ERROR_INVALID_INDEX; |
| goto failed; |
| } |
| |
| /* Adapter needs to be powered to be able to connect */ |
| if (!l_dbus_proxy_get_property(adapter->proxy, "Powered", "b", &prop) || |
| !prop) |
| goto failed; |
| |
| device = find_device_by_address(adapter, &cp->address, |
| cp->address_type); |
| |
| if (!device) { |
| cdd = l_new(struct connect_device_data, 1); |
| memcpy(&cdd->addr, &cp->address, sizeof(cdd->addr)); |
| cdd->addr_type = cp->address_type; |
| |
| l_dbus_proxy_method_call(adapter->proxy, "ConnectDevice", |
| connect_device_setup, |
| connect_device_reply, |
| cdd, |
| connect_device_destroy); |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_CONNECT, |
| adapter->index, 0, NULL); |
| return; |
| } |
| |
| l_dbus_proxy_method_call(device->proxy, "Connect", NULL, connect_reply, |
| L_UINT_TO_PTR(adapter->index), NULL); |
| |
| return; |
| |
| failed: |
| btp_send_error(btp, BTP_GAP_SERVICE, index, status); |
| } |
| |
| static void disconnect_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, void *user_data) |
| { |
| uint8_t adapter_index = L_PTR_TO_UINT(user_data); |
| struct btp_adapter *adapter = find_adapter_by_index(adapter_index); |
| |
| if (!adapter) { |
| btp_send_error(btp, BTP_GAP_SERVICE, BTP_INDEX_NON_CONTROLLER, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name, *desc; |
| |
| l_dbus_message_get_error(result, &name, &desc); |
| l_error("Failed to disconnect (%s), %s", name, desc); |
| |
| btp_send_error(btp, BTP_GAP_SERVICE, adapter_index, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_DISCONNECT, adapter_index, 0, |
| NULL); |
| } |
| |
| static void btp_gap_disconnect(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| const struct btp_gap_disconnect_cp *cp = param; |
| uint8_t status = BTP_ERROR_FAIL; |
| struct btp_device *device; |
| bool prop; |
| |
| if (!adapter) { |
| status = BTP_ERROR_INVALID_INDEX; |
| goto failed; |
| } |
| |
| /* Adapter needs to be powered to be able to connect */ |
| if (!l_dbus_proxy_get_property(adapter->proxy, "Powered", "b", &prop) || |
| !prop) |
| goto failed; |
| |
| device = find_device_by_address(adapter, &cp->address, |
| cp->address_type); |
| |
| if (!device) |
| goto failed; |
| |
| l_dbus_proxy_method_call(device->proxy, "Disconnect", NULL, |
| disconnect_reply, |
| L_UINT_TO_PTR(adapter->index), NULL); |
| |
| return; |
| |
| failed: |
| btp_send_error(btp, BTP_GAP_SERVICE, index, status); |
| } |
| |
| static struct l_dbus_message *ag_release_call(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| void *user_data) |
| { |
| struct l_dbus_message *reply; |
| |
| reply = l_dbus_message_new_method_return(message); |
| l_dbus_message_set_arguments(reply, ""); |
| |
| return reply; |
| } |
| |
| static struct l_dbus_message *ag_request_passkey_call(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| void *user_data) |
| { |
| struct btp_gap_passkey_req_ev ev; |
| struct btp_device *device; |
| struct btp_adapter *adapter; |
| const char *path, *str_addr, *str_addr_type; |
| |
| l_dbus_message_get_arguments(message, "o", &path); |
| |
| device = find_device_by_path(path); |
| |
| if (!l_dbus_proxy_get_property(device->proxy, "Address", "s", &str_addr) |
| || !l_dbus_proxy_get_property(device->proxy, "AddressType", "s", |
| &str_addr_type)) { |
| l_info("Cannot get device properties"); |
| |
| return NULL; |
| } |
| |
| ev.address_type = strcmp(str_addr_type, "public") ? |
| BTP_GAP_ADDR_RANDOM : |
| BTP_GAP_ADDR_PUBLIC; |
| if (!str2ba(str_addr, &ev.address)) |
| return NULL; |
| |
| adapter = find_adapter_by_device(device); |
| |
| ag.pending_req = l_dbus_message_ref(message); |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_EV_GAP_PASSKEY_REQUEST, |
| adapter->index, sizeof(ev), &ev); |
| |
| return NULL; |
| } |
| |
| static struct l_dbus_message *ag_display_passkey_call(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| void *user_data) |
| { |
| struct btp_gap_passkey_display_ev ev; |
| struct btp_device *device; |
| struct btp_adapter *adapter; |
| struct l_dbus_message *reply; |
| const char *path, *str_addr, *str_addr_type; |
| uint32_t passkey; |
| uint16_t entered; |
| |
| reply = l_dbus_message_new_method_return(message); |
| l_dbus_message_set_arguments(reply, ""); |
| |
| l_dbus_message_get_arguments(message, "ouq", &path, &passkey, &entered); |
| |
| device = find_device_by_path(path); |
| |
| if (!l_dbus_proxy_get_property(device->proxy, "Address", "s", &str_addr) |
| || !l_dbus_proxy_get_property(device->proxy, "AddressType", "s", |
| &str_addr_type)) { |
| l_info("Cannot get device properties"); |
| |
| return reply; |
| } |
| |
| ev.passkey = L_CPU_TO_LE32(passkey); |
| ev.address_type = strcmp(str_addr_type, "public") ? |
| BTP_GAP_ADDR_RANDOM : |
| BTP_GAP_ADDR_PUBLIC; |
| if (str2ba(str_addr, &ev.address) < 0) { |
| l_info("Incorrect device addres"); |
| |
| return reply; |
| } |
| |
| adapter = find_adapter_by_device(device); |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_EV_GAP_PASSKEY_DISPLAY, |
| adapter->index, sizeof(ev), &ev); |
| |
| return reply; |
| } |
| |
| static struct l_dbus_message *ag_request_confirmation_call(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| void *user_data) |
| { |
| struct btp_gap_passkey_confirm_ev ev; |
| struct btp_device *device; |
| struct btp_adapter *adapter; |
| const char *path, *str_addr, *str_addr_type; |
| uint32_t passkey; |
| |
| l_dbus_message_get_arguments(message, "ou", &path, &passkey); |
| |
| device = find_device_by_path(path); |
| |
| if (!l_dbus_proxy_get_property(device->proxy, "Address", "s", &str_addr) |
| || !l_dbus_proxy_get_property(device->proxy, "AddressType", "s", |
| &str_addr_type)) { |
| l_info("Cannot get device properties"); |
| |
| return NULL; |
| } |
| |
| ev.passkey = L_CPU_TO_LE32(passkey); |
| ev.address_type = strcmp(str_addr_type, "public") ? |
| BTP_GAP_ADDR_RANDOM : |
| BTP_GAP_ADDR_PUBLIC; |
| if (str2ba(str_addr, &ev.address) < 0) { |
| l_info("Incorrect device address"); |
| |
| return NULL; |
| } |
| |
| adapter = find_adapter_by_device(device); |
| |
| ag.pending_req = l_dbus_message_ref(message); |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_EV_GAP_PASSKEY_CONFIRM, |
| adapter->index, sizeof(ev), &ev); |
| |
| return NULL; |
| } |
| |
| static struct l_dbus_message *ag_request_authorization_call(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| void *user_data) |
| { |
| struct l_dbus_message *reply; |
| |
| reply = l_dbus_message_new_method_return(message); |
| l_dbus_message_set_arguments(reply, ""); |
| |
| return reply; |
| } |
| |
| static struct l_dbus_message *ag_authorize_service_call(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| void *user_data) |
| { |
| struct l_dbus_message *reply; |
| |
| reply = l_dbus_message_new_method_return(message); |
| l_dbus_message_set_arguments(reply, ""); |
| |
| return reply; |
| } |
| |
| static struct l_dbus_message *ag_cancel_call(struct l_dbus *dbus, |
| struct l_dbus_message *message, |
| void *user_data) |
| { |
| struct l_dbus_message *reply; |
| |
| reply = l_dbus_message_new_method_return(message); |
| l_dbus_message_set_arguments(reply, ""); |
| |
| return reply; |
| } |
| |
| static void setup_ag_interface(struct l_dbus_interface *iface) |
| { |
| l_dbus_interface_method(iface, "Release", 0, ag_release_call, "", ""); |
| l_dbus_interface_method(iface, "RequestPasskey", 0, |
| ag_request_passkey_call, "u", "o", |
| "passkey", "device"); |
| l_dbus_interface_method(iface, "DisplayPasskey", 0, |
| ag_display_passkey_call, "", "ouq", |
| "device", "passkey", "entered"); |
| l_dbus_interface_method(iface, "RequestConfirmation", 0, |
| ag_request_confirmation_call, "", "ou", |
| "device", "passkey"); |
| l_dbus_interface_method(iface, "RequestAuthorization", 0, |
| ag_request_authorization_call, "", "o", |
| "device"); |
| l_dbus_interface_method(iface, "AuthorizeService", 0, |
| ag_authorize_service_call, "", "os", |
| "device", "uuid"); |
| l_dbus_interface_method(iface, "Cancel", 0, ag_cancel_call, "", ""); |
| } |
| |
| struct set_io_capabilities_data { |
| uint8_t capa; |
| struct btp_adapter *adapter; |
| }; |
| |
| static void set_io_capabilities_setup(struct l_dbus_message *message, |
| void *user_data) |
| { |
| struct set_io_capabilities_data *sicd = user_data; |
| struct l_dbus_message_builder *builder; |
| char *capa_str; |
| |
| builder = l_dbus_message_builder_new(message); |
| |
| l_dbus_message_builder_append_basic(builder, 'o', AG_PATH); |
| |
| switch (sicd->capa) { |
| case BTP_GAP_IOCAPA_DISPLAY_ONLY: |
| capa_str = "DisplayOnly"; |
| break; |
| case BTP_GAP_IOCAPA_DISPLAY_YESNO: |
| capa_str = "DisplayYesNo"; |
| break; |
| case BTP_GAP_IOCAPA_KEYBOARD_ONLY: |
| capa_str = "KeyboardOnly"; |
| break; |
| case BTP_GAP_IOCAPA_KEYBOARD_DISPLAY: |
| capa_str = "KeyboardDisplay"; |
| break; |
| case BTP_GAP_IOCAPA_NO_INPUT_NO_OUTPUT: |
| default: |
| capa_str = "NoInputNoOutput"; |
| break; |
| } |
| |
| l_dbus_message_builder_append_basic(builder, 's', capa_str); |
| |
| l_dbus_message_builder_finalize(builder); |
| l_dbus_message_builder_destroy(builder); |
| } |
| |
| static void reg_def_req_default_agent_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, |
| void *user_data) |
| { |
| if (l_dbus_message_is_error(result)) { |
| const char *name, *desc; |
| |
| if (!l_dbus_object_remove_interface(dbus, AG_PATH, AG_IFACE)) |
| l_info("Unable to remove agent instance"); |
| if (!l_dbus_unregister_interface(dbus, AG_IFACE)) |
| l_info("Unable to unregister agent interface"); |
| |
| l_dbus_message_get_error(result, &name, &desc); |
| l_error("Failed to request default agent (%s), %s", name, desc); |
| |
| btp_send_error(btp, BTP_CORE_SERVICE, BTP_INDEX_NON_CONTROLLER, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| register_gap_service(); |
| gap_service_registered = true; |
| |
| ag.registered = true; |
| |
| btp_send(btp, BTP_CORE_SERVICE, BTP_OP_CORE_REGISTER, |
| BTP_INDEX_NON_CONTROLLER, 0, NULL); |
| } |
| |
| static void set_io_req_default_agent_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, |
| void *user_data) |
| { |
| struct btp_adapter *adapter = user_data; |
| |
| if (!adapter) { |
| btp_send_error(btp, BTP_GAP_SERVICE, BTP_INDEX_NON_CONTROLLER, |
| BTP_ERROR_FAIL); |
| goto failed; |
| } |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name, *desc; |
| |
| l_dbus_message_get_error(result, &name, &desc); |
| l_error("Failed to set io capabilities (%s), %s", name, desc); |
| |
| btp_send_error(btp, BTP_GAP_SERVICE, adapter->index, |
| BTP_ERROR_FAIL); |
| goto failed; |
| } |
| |
| ag.registered = true; |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_SET_IO_CAPA, |
| adapter->index, 0, NULL); |
| |
| return; |
| |
| failed: |
| if (!l_dbus_object_remove_interface(dbus, AG_PATH, AG_IFACE)) |
| l_info("Unable to remove agent instance"); |
| if (!l_dbus_unregister_interface(dbus, AG_IFACE)) |
| l_info("Unable to unregister agent interface"); |
| } |
| |
| static void request_default_agent_setup(struct l_dbus_message *message, |
| void *user_data) |
| { |
| struct l_dbus_message_builder *builder; |
| |
| builder = l_dbus_message_builder_new(message); |
| |
| l_dbus_message_builder_append_basic(builder, 'o', AG_PATH); |
| |
| l_dbus_message_builder_finalize(builder); |
| l_dbus_message_builder_destroy(builder); |
| } |
| |
| static void set_io_capabilities_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, |
| void *user_data) |
| { |
| struct set_io_capabilities_data *sicd = user_data; |
| |
| if (!sicd->adapter) { |
| btp_send_error(btp, BTP_GAP_SERVICE, BTP_INDEX_NON_CONTROLLER, |
| BTP_ERROR_FAIL); |
| goto failed; |
| } |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name, *desc; |
| |
| l_dbus_message_get_error(result, &name, &desc); |
| l_error("Failed to set io capabilities (%s), %s", name, desc); |
| |
| btp_send_error(btp, BTP_GAP_SERVICE, sicd->adapter->index, |
| BTP_ERROR_FAIL); |
| goto failed; |
| } |
| |
| if (l_dbus_proxy_method_call(ag.proxy, "RequestDefaultAgent", |
| request_default_agent_setup, |
| set_io_req_default_agent_reply, |
| sicd->adapter, NULL)) |
| return; |
| |
| failed: |
| if (!l_dbus_object_remove_interface(dbus, AG_PATH, AG_IFACE)) |
| l_info("Unable to remove agent instance"); |
| if (!l_dbus_unregister_interface(dbus, AG_IFACE)) |
| l_info("Unable to unregister agent interface"); |
| } |
| |
| static void register_default_agent_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, |
| void *user_data) |
| { |
| const char *name, *desc; |
| |
| if (l_dbus_message_is_error(result)) { |
| if (!l_dbus_object_remove_interface(dbus, AG_PATH, AG_IFACE)) |
| l_info("Unable to remove agent instance"); |
| if (!l_dbus_unregister_interface(dbus, AG_IFACE)) |
| l_info("Unable to unregister agent interface"); |
| |
| l_dbus_message_get_error(result, &name, &desc); |
| l_error("Failed to register default agent (%s), %s", name, |
| desc); |
| return; |
| } |
| |
| if (!l_dbus_proxy_method_call(ag.proxy, "RequestDefaultAgent", |
| request_default_agent_setup, |
| reg_def_req_default_agent_reply, |
| NULL, NULL)) { |
| if (!l_dbus_object_remove_interface(dbus, AG_PATH, AG_IFACE)) |
| l_info("Unable to remove agent instance"); |
| if (!l_dbus_unregister_interface(dbus, AG_IFACE)) |
| l_info("Unable to unregister agent interface"); |
| } |
| } |
| |
| static void set_io_capabilities_destroy(void *user_data) |
| { |
| l_free(user_data); |
| } |
| |
| static bool register_default_agent(struct btp_adapter *adapter, uint8_t capa, |
| l_dbus_client_proxy_result_func_t set_io_cb) |
| { |
| struct set_io_capabilities_data *data; |
| |
| if (!l_dbus_register_interface(dbus, AG_IFACE, setup_ag_interface, NULL, |
| false)) { |
| l_info("Unable to register agent interface"); |
| return false; |
| } |
| |
| if (!l_dbus_object_add_interface(dbus, AG_PATH, AG_IFACE, NULL)) { |
| l_info("Unable to instantiate agent interface"); |
| |
| if (!l_dbus_unregister_interface(dbus, AG_IFACE)) |
| l_info("Unable to unregister agent interface"); |
| |
| return false; |
| } |
| |
| if (!l_dbus_object_add_interface(dbus, AG_PATH, |
| L_DBUS_INTERFACE_PROPERTIES, |
| NULL)) { |
| l_info("Unable to instantiate the ag properties interface"); |
| |
| if (!l_dbus_object_remove_interface(dbus, AG_PATH, AG_IFACE)) |
| l_info("Unable to remove agent instance"); |
| if (!l_dbus_unregister_interface(dbus, AG_IFACE)) |
| l_info("Unable to unregister agent interface"); |
| |
| return false; |
| } |
| |
| data = l_new(struct set_io_capabilities_data, 1); |
| data->adapter = adapter; |
| data->capa = capa; |
| |
| if (!l_dbus_proxy_method_call(ag.proxy, "RegisterAgent", |
| set_io_capabilities_setup, set_io_cb, |
| data, set_io_capabilities_destroy)) { |
| if (!l_dbus_object_remove_interface(dbus, AG_PATH, AG_IFACE)) |
| l_info("Unable to remove agent instance"); |
| if (!l_dbus_unregister_interface(dbus, AG_IFACE)) |
| l_info("Unable to unregister agent interface"); |
| |
| return false; |
| } |
| |
| return true; |
| } |
| |
| struct rereg_unreg_agent_data { |
| struct btp_adapter *adapter; |
| l_dbus_client_proxy_result_func_t cb; |
| uint8_t capa; |
| }; |
| |
| static void rereg_unreg_agent_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, |
| void *user_data) |
| { |
| struct rereg_unreg_agent_data *ruad = user_data; |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name; |
| |
| l_dbus_message_get_error(result, &name, NULL); |
| |
| l_error("Failed to unregister agent %s (%s)", |
| l_dbus_proxy_get_path(proxy), name); |
| return; |
| } |
| |
| if (!l_dbus_object_remove_interface(dbus, AG_PATH, |
| L_DBUS_INTERFACE_PROPERTIES)) |
| l_info("Unable to remove propety instance"); |
| if (!l_dbus_object_remove_interface(dbus, AG_PATH, AG_IFACE)) |
| l_info("Unable to remove agent instance"); |
| if (!l_dbus_unregister_interface(dbus, AG_IFACE)) |
| l_info("Unable to unregister agent interface"); |
| |
| ag.registered = false; |
| |
| if (!register_default_agent(ruad->adapter, ruad->capa, ruad->cb)) |
| btp_send_error(btp, BTP_GAP_SERVICE, ruad->adapter->index, |
| BTP_ERROR_FAIL); |
| } |
| |
| static void rereg_unreg_agent_destroy(void *rereg_unreg_agent_data) |
| { |
| l_free(rereg_unreg_agent_data); |
| } |
| |
| static void btp_gap_set_io_capabilities(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| const struct btp_gap_set_io_capa_cp *cp = param; |
| uint8_t status = BTP_ERROR_FAIL; |
| struct rereg_unreg_agent_data *data; |
| bool prop; |
| |
| switch (cp->capa) { |
| case BTP_GAP_IOCAPA_DISPLAY_ONLY: |
| case BTP_GAP_IOCAPA_DISPLAY_YESNO: |
| case BTP_GAP_IOCAPA_KEYBOARD_ONLY: |
| case BTP_GAP_IOCAPA_NO_INPUT_NO_OUTPUT: |
| case BTP_GAP_IOCAPA_KEYBOARD_DISPLAY: |
| break; |
| default: |
| l_error("Wrong iocapa given!"); |
| |
| goto failed; |
| } |
| |
| if (!adapter) { |
| status = BTP_ERROR_INVALID_INDEX; |
| goto failed; |
| } |
| |
| /* Adapter needs to be powered to be able to set io cap */ |
| if (!l_dbus_proxy_get_property(adapter->proxy, "Powered", "b", &prop) || |
| !prop) |
| goto failed; |
| |
| if (ag.registered) { |
| data = l_new(struct rereg_unreg_agent_data, 1); |
| data->adapter = adapter; |
| data->capa = cp->capa; |
| data->cb = set_io_capabilities_reply; |
| |
| if (!l_dbus_proxy_method_call(ag.proxy, "UnregisterAgent", |
| unreg_agent_setup, |
| rereg_unreg_agent_reply, data, |
| rereg_unreg_agent_destroy)) |
| goto failed; |
| |
| return; |
| } |
| |
| if (!register_default_agent(adapter, cp->capa, |
| set_io_capabilities_reply)) |
| goto failed; |
| |
| return; |
| |
| failed: |
| btp_send_error(btp, BTP_GAP_SERVICE, index, status); |
| } |
| |
| static void pair_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, void *user_data) |
| { |
| uint8_t adapter_index = L_PTR_TO_UINT(user_data); |
| struct btp_adapter *adapter = find_adapter_by_index(adapter_index); |
| |
| if (!adapter) |
| return; |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name, *desc; |
| |
| l_dbus_message_get_error(result, &name, &desc); |
| l_error("Failed to pair (%s), %s", name, desc); |
| |
| return; |
| } |
| } |
| |
| static void btp_gap_pair(uint8_t index, const void *param, uint16_t length, |
| void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| const struct btp_gap_pair_cp *cp = param; |
| uint8_t status = BTP_ERROR_FAIL; |
| struct btp_device *device; |
| bool prop; |
| |
| if (!adapter) { |
| status = BTP_ERROR_INVALID_INDEX; |
| goto failed; |
| } |
| |
| /* Adapter needs to be powered to be able to pair */ |
| if (!l_dbus_proxy_get_property(adapter->proxy, "Powered", "b", &prop) || |
| !prop) |
| goto failed; |
| |
| device = find_device_by_address(adapter, &cp->address, |
| cp->address_type); |
| |
| if (!device) |
| goto failed; |
| |
| /* This command is asynchronous, send reply immediatelly to not block |
| * pairing process eg. passkey request. |
| */ |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_PAIR, adapter->index, 0, |
| NULL); |
| |
| l_dbus_proxy_method_call(device->proxy, "Pair", NULL, pair_reply, |
| L_UINT_TO_PTR(adapter->index), NULL); |
| |
| return; |
| |
| failed: |
| btp_send_error(btp, BTP_GAP_SERVICE, index, status); |
| } |
| |
| static void unpair_reply(struct l_dbus_proxy *proxy, |
| struct l_dbus_message *result, void *user_data) |
| { |
| struct btp_device *device = user_data; |
| struct btp_adapter *adapter = find_adapter_by_device(device); |
| |
| if (!adapter) { |
| btp_send_error(btp, BTP_GAP_SERVICE, BTP_INDEX_NON_CONTROLLER, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name, *desc; |
| |
| l_dbus_message_get_error(result, &name, &desc); |
| l_error("Failed to unpair (%s), %s", name, desc); |
| |
| btp_send_error(btp, BTP_GAP_SERVICE, adapter->index, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_UNPAIR, adapter->index, 0, |
| NULL); |
| } |
| |
| static void unpair_setup(struct l_dbus_message *message, void *user_data) |
| { |
| struct btp_device *device = user_data; |
| const char *path = l_dbus_proxy_get_path(device->proxy); |
| struct l_dbus_message_builder *builder; |
| |
| builder = l_dbus_message_builder_new(message); |
| |
| l_dbus_message_builder_append_basic(builder, 'o', path); |
| |
| l_dbus_message_builder_finalize(builder); |
| l_dbus_message_builder_destroy(builder); |
| } |
| |
| static void btp_gap_unpair(uint8_t index, const void *param, uint16_t length, |
| void *user_data) |
| { |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| const struct btp_gap_pair_cp *cp = param; |
| uint8_t status = BTP_ERROR_FAIL; |
| struct btp_device *device; |
| bool prop; |
| |
| if (!adapter) { |
| status = BTP_ERROR_INVALID_INDEX; |
| goto failed; |
| } |
| |
| /* Adapter needs to be powered to be able to unpair */ |
| if (!l_dbus_proxy_get_property(adapter->proxy, "Powered", "b", &prop) || |
| !prop) |
| goto failed; |
| |
| device = find_device_by_address(adapter, &cp->address, |
| cp->address_type); |
| |
| if (!device) |
| goto failed; |
| |
| /* There is no direct unpair method, removing device will clear pairing |
| * information. |
| */ |
| l_dbus_proxy_method_call(adapter->proxy, "RemoveDevice", unpair_setup, |
| unpair_reply, device, NULL); |
| |
| return; |
| |
| failed: |
| btp_send_error(btp, BTP_GAP_SERVICE, index, status); |
| } |
| |
| static void passkey_entry_rsp_reply(struct l_dbus_message *result, |
| void *user_data) |
| { |
| struct btp_adapter *adapter = user_data; |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name, *desc; |
| |
| l_dbus_message_get_error(result, &name, &desc); |
| l_error("Failed to reply with passkey (%s), %s", name, desc); |
| |
| btp_send_error(btp, BTP_GAP_SERVICE, adapter->index, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| l_dbus_message_unref(ag.pending_req); |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_PASSKEY_ENTRY_RSP, |
| adapter->index, 0, NULL); |
| } |
| |
| static void btp_gap_passkey_entry_rsp(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| const struct btp_gap_passkey_entry_rsp_cp *cp = param; |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| struct l_dbus_message_builder *builder; |
| uint8_t status = BTP_ERROR_FAIL; |
| uint32_t passkey = L_CPU_TO_LE32(cp->passkey); |
| bool prop; |
| |
| if (!adapter) { |
| status = BTP_ERROR_INVALID_INDEX; |
| goto failed; |
| } |
| |
| /* Adapter needs to be powered to be able to response with passkey */ |
| if (!l_dbus_proxy_get_property(adapter->proxy, "Powered", "b", &prop) || |
| !prop || !ag.pending_req) |
| goto failed; |
| |
| builder = l_dbus_message_builder_new(ag.pending_req); |
| l_dbus_message_builder_append_basic(builder, 'u', &passkey); |
| l_dbus_message_builder_finalize(builder); |
| l_dbus_message_builder_destroy(builder); |
| |
| l_dbus_send_with_reply(dbus, ag.pending_req, passkey_entry_rsp_reply, |
| adapter, NULL); |
| |
| return; |
| |
| failed: |
| btp_send_error(btp, BTP_GAP_SERVICE, index, status); |
| } |
| |
| static void passkey_confirm_rsp_reply(struct l_dbus_message *result, |
| void *user_data) |
| { |
| struct btp_adapter *adapter = user_data; |
| |
| if (l_dbus_message_is_error(result)) { |
| const char *name, *desc; |
| |
| l_dbus_message_get_error(result, &name, &desc); |
| l_error("Failed to confirm passkey (%s), %s", name, desc); |
| |
| btp_send_error(btp, BTP_GAP_SERVICE, adapter->index, |
| BTP_ERROR_FAIL); |
| return; |
| } |
| |
| l_dbus_message_unref(ag.pending_req); |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_OP_GAP_PASSKEY_CONFIRM_RSP, |
| adapter->index, 0, NULL); |
| } |
| |
| static void btp_gap_confirm_entry_rsp(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| const struct btp_gap_passkey_confirm_rsp_cp *cp = param; |
| struct btp_adapter *adapter = find_adapter_by_index(index); |
| struct l_dbus_message *reply; |
| uint8_t status = BTP_ERROR_FAIL; |
| bool prop; |
| |
| if (!adapter) { |
| status = BTP_ERROR_INVALID_INDEX; |
| goto failed; |
| } |
| |
| /* Adapter needs to be powered to be able to confirm passkey */ |
| if (!l_dbus_proxy_get_property(adapter->proxy, "Powered", "b", &prop) || |
| !prop || !ag.pending_req) |
| goto failed; |
| |
| if (cp->match) { |
| reply = l_dbus_message_new_method_return(ag.pending_req); |
| l_dbus_message_set_arguments(reply, ""); |
| } else { |
| reply = l_dbus_message_new_error(ag.pending_req, |
| "org.bluez.Error.Rejected", |
| "Passkey missmatch"); |
| } |
| |
| l_dbus_send_with_reply(dbus, ag.pending_req, passkey_confirm_rsp_reply, |
| adapter, NULL); |
| |
| return; |
| |
| failed: |
| btp_send_error(btp, BTP_GAP_SERVICE, index, status); |
| } |
| |
| static void btp_gap_device_found_ev(struct l_dbus_proxy *proxy) |
| { |
| struct btp_device *device = find_device_by_proxy(proxy); |
| struct btp_adapter *adapter = find_adapter_by_device(device); |
| struct btp_device_found_ev ev; |
| struct btp_gap_device_connected_ev ev_conn; |
| const char *str, *addr_str; |
| int16_t rssi; |
| uint8_t address_type; |
| bool connected; |
| |
| if (!l_dbus_proxy_get_property(proxy, "Address", "s", &addr_str) || |
| str2ba(addr_str, &ev.address) < 0) |
| return; |
| |
| if (!l_dbus_proxy_get_property(proxy, "AddressType", "s", &str)) |
| return; |
| |
| address_type = strcmp(str, "public") ? BTP_GAP_ADDR_RANDOM : |
| BTP_GAP_ADDR_PUBLIC; |
| ev.address_type = address_type; |
| |
| if (!l_dbus_proxy_get_property(proxy, "RSSI", "n", &rssi)) |
| ev.rssi = 0x81; |
| else |
| ev.rssi = rssi; |
| |
| /* TODO Temporary set all flags */ |
| ev.flags = (BTP_EV_GAP_DEVICE_FOUND_FLAG_RSSI | |
| BTP_EV_GAP_DEVICE_FOUND_FLAG_AD | |
| BTP_EV_GAP_DEVICE_FOUND_FLAG_SR); |
| |
| /* TODO Add eir to device found event */ |
| ev.eir_len = 0; |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_EV_GAP_DEVICE_FOUND, adapter->index, |
| sizeof(ev) + ev.eir_len, &ev); |
| |
| if (l_dbus_proxy_get_property(proxy, "Connected", "b", &connected) && |
| connected) { |
| ev_conn.address_type = address_type; |
| str2ba(addr_str, &ev_conn.address); |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_EV_GAP_DEVICE_CONNECTED, |
| adapter->index, sizeof(ev_conn), &ev_conn); |
| } |
| } |
| |
| static void btp_gap_device_connection_ev(struct l_dbus_proxy *proxy, |
| bool connected) |
| { |
| struct btp_adapter *adapter; |
| struct btp_device *device; |
| const char *str_addr, *str_addr_type; |
| uint8_t address_type; |
| |
| device = find_device_by_proxy(proxy); |
| adapter = find_adapter_by_device(device); |
| |
| if (!device || !adapter) |
| return; |
| |
| if (!l_dbus_proxy_get_property(proxy, "Address", "s", &str_addr)) |
| return; |
| |
| if (!l_dbus_proxy_get_property(proxy, "AddressType", "s", |
| &str_addr_type)) |
| return; |
| |
| address_type = strcmp(str_addr_type, "public") ? BTP_GAP_ADDR_RANDOM : |
| BTP_GAP_ADDR_PUBLIC; |
| |
| if (connected) { |
| struct btp_gap_device_connected_ev ev; |
| |
| str2ba(str_addr, &ev.address); |
| ev.address_type = address_type; |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_EV_GAP_DEVICE_CONNECTED, |
| adapter->index, sizeof(ev), &ev); |
| } else { |
| struct btp_gap_device_disconnected_ev ev; |
| |
| str2ba(str_addr, &ev.address); |
| ev.address_type = address_type; |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_EV_GAP_DEVICE_DISCONNECTED, |
| adapter->index, sizeof(ev), &ev); |
| } |
| } |
| |
| static void btp_identity_resolved_ev(struct l_dbus_proxy *proxy) |
| { |
| struct btp_device *dev = find_device_by_proxy(proxy); |
| struct btp_adapter *adapter = find_adapter_by_device(dev); |
| struct btp_gap_identity_resolved_ev ev; |
| char *str_addr, *str_addr_type; |
| uint8_t identity_address_type; |
| |
| if (!l_dbus_proxy_get_property(proxy, "Address", "s", &str_addr)) |
| return; |
| |
| if (!l_dbus_proxy_get_property(proxy, "AddressType", "s", |
| &str_addr_type)) |
| return; |
| |
| identity_address_type = strcmp(str_addr_type, "public") ? |
| BTP_GAP_ADDR_RANDOM : BTP_GAP_ADDR_PUBLIC; |
| |
| str2ba(str_addr, &ev.identity_address); |
| ev.identity_address_type = identity_address_type; |
| |
| memcpy(&ev.address, &dev->address, sizeof(ev.address)); |
| ev.address_type = dev->address_type; |
| |
| btp_send(btp, BTP_GAP_SERVICE, BTP_EV_GAP_IDENTITY_RESOLVED, |
| adapter->index, sizeof(ev), &ev); |
| } |
| |
| static void register_gap_service(void) |
| { |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_READ_SUPPORTED_COMMANDS, |
| btp_gap_read_commands, NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, |
| BTP_OP_GAP_READ_CONTROLLER_INDEX_LIST, |
| btp_gap_read_controller_index, NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_READ_COTROLLER_INFO, |
| btp_gap_read_info, NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_RESET, |
| btp_gap_reset, NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_SET_POWERED, |
| btp_gap_set_powered, NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_SET_CONNECTABLE, |
| btp_gap_set_connectable, NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_SET_DISCOVERABLE, |
| btp_gap_set_discoverable, NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_SET_BONDABLE, |
| btp_gap_set_bondable, NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_START_ADVERTISING, |
| btp_gap_start_advertising, NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_STOP_ADVERTISING, |
| btp_gap_stop_advertising, NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_START_DISCOVERY, |
| btp_gap_start_discovery, NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_STOP_DISCOVERY, |
| btp_gap_stop_discovery, NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_CONNECT, btp_gap_connect, |
| NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_DISCONNECT, |
| btp_gap_disconnect, NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_SET_IO_CAPA, |
| btp_gap_set_io_capabilities, NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_PAIR, btp_gap_pair, NULL, |
| NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_UNPAIR, btp_gap_unpair, |
| NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_PASSKEY_ENTRY_RSP, |
| btp_gap_passkey_entry_rsp, NULL, NULL); |
| |
| btp_register(btp, BTP_GAP_SERVICE, BTP_OP_GAP_PASSKEY_CONFIRM_RSP, |
| btp_gap_confirm_entry_rsp, NULL, NULL); |
| } |
| |
| static void btp_core_read_commands(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| uint8_t commands = 0; |
| |
| if (index != BTP_INDEX_NON_CONTROLLER) { |
| btp_send_error(btp, BTP_CORE_SERVICE, index, |
| BTP_ERROR_INVALID_INDEX); |
| return; |
| } |
| |
| commands |= (1 << BTP_OP_CORE_READ_SUPPORTED_COMMANDS); |
| commands |= (1 << BTP_OP_CORE_READ_SUPPORTED_SERVICES); |
| commands |= (1 << BTP_OP_CORE_REGISTER); |
| commands |= (1 << BTP_OP_CORE_UNREGISTER); |
| |
| btp_send(btp, BTP_CORE_SERVICE, BTP_OP_CORE_READ_SUPPORTED_COMMANDS, |
| BTP_INDEX_NON_CONTROLLER, sizeof(commands), &commands); |
| } |
| |
| static void btp_core_read_services(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| uint8_t services = 0; |
| |
| if (index != BTP_INDEX_NON_CONTROLLER) { |
| btp_send_error(btp, BTP_CORE_SERVICE, index, |
| BTP_ERROR_INVALID_INDEX); |
| return; |
| } |
| |
| services |= (1 << BTP_CORE_SERVICE); |
| services |= (1 << BTP_GAP_SERVICE); |
| |
| btp_send(btp, BTP_CORE_SERVICE, BTP_OP_CORE_READ_SUPPORTED_SERVICES, |
| BTP_INDEX_NON_CONTROLLER, sizeof(services), &services); |
| } |
| |
| static void btp_core_register(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| const struct btp_core_register_cp *cp = param; |
| |
| if (length < sizeof(*cp)) |
| goto failed; |
| |
| if (index != BTP_INDEX_NON_CONTROLLER) { |
| btp_send_error(btp, BTP_CORE_SERVICE, index, |
| BTP_ERROR_INVALID_INDEX); |
| return; |
| } |
| |
| switch (cp->service_id) { |
| case BTP_GAP_SERVICE: |
| if (gap_service_registered) |
| goto failed; |
| |
| if (!register_default_agent(NULL, |
| BTP_GAP_IOCAPA_NO_INPUT_NO_OUTPUT, |
| register_default_agent_reply)) |
| goto failed; |
| |
| return; |
| case BTP_GATT_SERVICE: |
| case BTP_L2CAP_SERVICE: |
| case BTP_MESH_NODE_SERVICE: |
| case BTP_CORE_SERVICE: |
| default: |
| goto failed; |
| } |
| |
| btp_send(btp, BTP_CORE_SERVICE, BTP_OP_CORE_REGISTER, |
| BTP_INDEX_NON_CONTROLLER, 0, NULL); |
| return; |
| |
| failed: |
| btp_send_error(btp, BTP_CORE_SERVICE, index, BTP_ERROR_FAIL); |
| } |
| |
| static void btp_core_unregister(uint8_t index, const void *param, |
| uint16_t length, void *user_data) |
| { |
| const struct btp_core_unregister_cp *cp = param; |
| |
| if (length < sizeof(*cp)) |
| goto failed; |
| |
| if (index != BTP_INDEX_NON_CONTROLLER) { |
| btp_send_error(btp, BTP_CORE_SERVICE, index, |
| BTP_ERROR_INVALID_INDEX); |
| return; |
| } |
| |
| switch (cp->service_id) { |
| case BTP_GAP_SERVICE: |
| if (!gap_service_registered) |
| goto failed; |
| |
| btp_unregister_service(btp, BTP_GAP_SERVICE); |
| gap_service_registered = false; |
| break; |
| case BTP_GATT_SERVICE: |
| case BTP_L2CAP_SERVICE: |
| case BTP_MESH_NODE_SERVICE: |
| case BTP_CORE_SERVICE: |
| default: |
| goto failed; |
| } |
| |
| btp_send(btp, BTP_CORE_SERVICE, BTP_OP_CORE_UNREGISTER, |
| BTP_INDEX_NON_CONTROLLER, 0, NULL); |
| return; |
| |
| failed: |
| btp_send_error(btp, BTP_CORE_SERVICE, index, BTP_ERROR_FAIL); |
| } |
| |
| static void register_core_service(void) |
| { |
| btp_register(btp, BTP_CORE_SERVICE, |
| BTP_OP_CORE_READ_SUPPORTED_COMMANDS, |
| btp_core_read_commands, NULL, NULL); |
| |
| btp_register(btp, BTP_CORE_SERVICE, |
| BTP_OP_CORE_READ_SUPPORTED_SERVICES, |
| btp_core_read_services, NULL, NULL); |
| |
| btp_register(btp, BTP_CORE_SERVICE, BTP_OP_CORE_REGISTER, |
| btp_core_register, NULL, NULL); |
| |
| btp_register(btp, BTP_CORE_SERVICE, BTP_OP_CORE_UNREGISTER, |
| btp_core_unregister, NULL, NULL); |
| } |
| |
| static void signal_handler(struct l_signal *signal, uint32_t signo, |
| void *user_data) |
| { |
| switch (signo) { |
| case SIGINT: |
| case SIGTERM: |
| l_info("Terminating"); |
| l_main_quit(); |
| break; |
| } |
| } |
| |
| static void btp_device_free(struct btp_device *device) |
| { |
| l_free(device); |
| } |
| |
| static void btp_adapter_free(struct btp_adapter *adapter) |
| { |
| l_queue_destroy(adapter->devices, |
| (l_queue_destroy_func_t)btp_device_free); |
| l_free(adapter); |
| } |
| |
| static void extract_settings(struct l_dbus_proxy *proxy, uint32_t *current, |
| uint32_t *supported) |
| { |
| bool prop; |
| |
| *supported = 0; |
| *current = 0; |
| |
| /* TODO not all info is available via D-Bus API */ |
| *supported |= BTP_GAP_SETTING_POWERED; |
| *supported |= BTP_GAP_SETTING_CONNECTABLE; |
| *supported |= BTP_GAP_SETTING_DISCOVERABLE; |
| *supported |= BTP_GAP_SETTING_BONDABLE; |
| *supported |= BTP_GAP_SETTING_SSP; |
| *supported |= BTP_GAP_SETTING_BREDR; |
| *supported |= BTP_GAP_SETTING_LE; |
| *supported |= BTP_GAP_SETTING_ADVERTISING; |
| *supported |= BTP_GAP_SETTING_SC; |
| *supported |= BTP_GAP_SETTING_PRIVACY; |
| /* *supported |= BTP_GAP_SETTING_STATIC_ADDRESS; */ |
| |
| /* TODO not all info is availbe via D-Bus API so some are assumed to be |
| * enabled by bluetoothd or simply hardcoded until API is extended |
| */ |
| *current |= BTP_GAP_SETTING_CONNECTABLE; |
| *current |= BTP_GAP_SETTING_SSP; |
| *current |= BTP_GAP_SETTING_BREDR; |
| *current |= BTP_GAP_SETTING_LE; |
| *current |= BTP_GAP_SETTING_PRIVACY; |
| *current |= BTP_GAP_SETTING_SC; |
| /* *supported |= BTP_GAP_SETTING_STATIC_ADDRESS; */ |
| |
| if (l_dbus_proxy_get_property(proxy, "Powered", "b", &prop) && prop) |
| *current |= BTP_GAP_SETTING_POWERED; |
| |
| if (l_dbus_proxy_get_property(proxy, "Discoverable", "b", &prop) && |
| prop) |
| *current |= BTP_GAP_SETTING_DISCOVERABLE; |
| |
| if (l_dbus_proxy_get_property(proxy, "Pairable", "b", &prop) && prop) |
| *current |= BTP_GAP_SETTING_BONDABLE; |
| } |
| |
| static void proxy_added(struct l_dbus_proxy *proxy, void *user_data) |
| { |
| const char *interface = l_dbus_proxy_get_interface(proxy); |
| const char *path = l_dbus_proxy_get_path(proxy); |
| |
| l_info("Proxy added: %s (%s)", interface, path); |
| |
| if (!strcmp(interface, "org.bluez.Adapter1")) { |
| struct btp_adapter *adapter; |
| |
| adapter = l_new(struct btp_adapter, 1); |
| adapter->proxy = proxy; |
| adapter->index = l_queue_length(adapters); |
| adapter->devices = l_queue_new(); |
| |
| extract_settings(proxy, &adapter->current_settings, |
| &adapter->supported_settings); |
| |
| adapter->default_settings = adapter->current_settings; |
| |
| l_queue_push_tail(adapters, adapter); |
| return; |
| } |
| |
| if (!strcmp(interface, "org.bluez.Device1")) { |
| struct btp_adapter *adapter; |
| struct btp_device *device; |
| char *str, *str_addr, *str_addr_type; |
| |
| if (!l_dbus_proxy_get_property(proxy, "Adapter", "o", &str)) |
| return; |
| |
| adapter = find_adapter_by_path(str); |
| if (!adapter) |
| return; |
| |
| device = l_new(struct btp_device, 1); |
| device->proxy = proxy; |
| |
| l_queue_push_tail(adapter->devices, device); |
| |
| btp_gap_device_found_ev(proxy); |
| |
| if (!l_dbus_proxy_get_property(proxy, "Address", "s", |
| &str_addr)) |
| return; |
| |
| if (!l_dbus_proxy_get_property(proxy, "AddressType", "s", |
| &str_addr_type)) |
| return; |
| |
| device->address_type = strcmp(str_addr_type, "public") ? |
| BTP_GAP_ADDR_RANDOM : |
| BTP_GAP_ADDR_PUBLIC; |
| if (!str2ba(str_addr, &device->address)) |
| return; |
| |
| return; |
| } |
| |
| if (!strcmp(interface, "org.bluez.LEAdvertisingManager1")) { |
| struct btp_adapter *adapter; |
| |
| adapter = find_adapter_by_path(path); |
| if (!adapter) |
| return; |
| |
| adapter->ad_proxy = proxy; |
| |
| return; |
| } |
| |
| if (!strcmp(interface, "org.bluez.AgentManager1")) { |
| ag.proxy = proxy; |
| |
| return; |
| } |
| } |
| |
| static bool device_match_by_proxy(const void *a, const void *b) |
| { |
| const struct btp_device *device = a; |
| const struct l_dbus_proxy *proxy = b; |
| |
| return device->proxy == proxy; |
| } |
| |
| static void proxy_removed(struct l_dbus_proxy *proxy, void *user_data) |
| { |
| const char *interface = l_dbus_proxy_get_interface(proxy); |
| const char *path = l_dbus_proxy_get_path(proxy); |
| |
| l_info("Proxy removed: %s (%s)", interface, path); |
| |
| if (!strcmp(interface, "org.bluez.Adapter1")) { |
| l_info("Adapter removed, terminating."); |
| l_main_quit(); |
| return; |
| } |
| |
| if (!strcmp(interface, "org.bluez.Device1")) { |
| struct btp_adapter *adapter; |
| char *str; |
| |
| if (!l_dbus_proxy_get_property(proxy, "Adapter", "o", &str)) |
| return; |
| |
| adapter = find_adapter_by_path(str); |
| if (!adapter) |
| return; |
| |
| l_queue_remove_if(adapter->devices, device_match_by_proxy, |
| proxy); |
| |
| return; |
| } |
| } |
| |
| static void property_changed(struct l_dbus_proxy *proxy, const char *name, |
| struct l_dbus_message *msg, void *user_data) |
| { |
| const char *interface = l_dbus_proxy_get_interface(proxy); |
| const char *path = l_dbus_proxy_get_path(proxy); |
| |
| l_info("property_changed %s %s %s", name, path, interface); |
| |
| if (!strcmp(interface, "org.bluez.Adapter1")) { |
| struct btp_adapter *adapter = find_adapter_by_proxy(proxy); |
| uint32_t new_settings; |
| |
| if (!adapter) |
| return; |
| |
| new_settings = adapter->current_settings; |
| |
| if (!strcmp(name, "Powered")) { |
| bool prop; |
| |
| if (!l_dbus_message_get_arguments(msg, "b", &prop)) |
| return; |
| |
| if (prop) |
| new_settings |= BTP_GAP_SETTING_POWERED; |
| else |
| new_settings &= ~BTP_GAP_SETTING_POWERED; |
| } else if (!strcmp(name, "Discoverable")) { |
| bool prop; |
| |
| if (!l_dbus_message_get_arguments(msg, "b", &prop)) |
| return; |
| |
| if (prop) |
| new_settings |= BTP_GAP_SETTING_DISCOVERABLE; |
| else |
| new_settings &= ~BTP_GAP_SETTING_DISCOVERABLE; |
| } |
| |
| if (!strcmp(name, "Pairable")) { |
| bool prop; |
| |
| if (!l_dbus_message_get_arguments(msg, "b", &prop)) |
| return; |
| |
| if (prop) |
| new_settings |= BTP_GAP_SETTING_BONDABLE; |
| else |
| new_settings &= ~BTP_GAP_SETTING_BONDABLE; |
| } |
| |
| if (new_settings != adapter->current_settings) |
| update_current_settings(adapter, new_settings); |
| |
| return; |
| } else if (!strcmp(interface, "org.bluez.Device1")) { |
| if (!strcmp(name, "RSSI")) { |
| int16_t rssi; |
| |
| if (!l_dbus_message_get_arguments(msg, "n", &rssi)) |
| return; |
| |
| btp_gap_device_found_ev(proxy); |
| } else if (!strcmp(name, "Connected")) { |
| bool prop; |
| |
| if (!l_dbus_message_get_arguments(msg, "b", &prop)) |
| return; |
| |
| btp_gap_device_connection_ev(proxy, prop); |
| } else if (!strcmp(name, "AddressType")) { |
| /* Addres property change came first along with address |
| * type. |
| */ |
| btp_identity_resolved_ev(proxy); |
| } |
| } |
| } |
| |
| static void client_connected(struct l_dbus *dbus, void *user_data) |
| { |
| l_info("D-Bus client connected"); |
| } |
| |
| static void client_disconnected(struct l_dbus *dbus, void *user_data) |
| { |
| l_info("D-Bus client disconnected, terminated"); |
| l_main_quit(); |
| } |
| |
| static void btp_disconnect_handler(struct btp *btp, void *user_data) |
| { |
| l_info("btp disconnected"); |
| l_main_quit(); |
| } |
| |
| static void client_ready(struct l_dbus_client *client, void *user_data) |
| { |
| l_info("D-Bus client ready, connecting BTP"); |
| |
| btp = btp_new(socket_path); |
| if (!btp) { |
| l_error("Failed to connect BTP, terminating"); |
| l_main_quit(); |
| return; |
| } |
| |
| btp_set_disconnect_handler(btp, btp_disconnect_handler, NULL, NULL); |
| |
| register_core_service(); |
| |
| btp_send(btp, BTP_CORE_SERVICE, BTP_EV_CORE_READY, |
| BTP_INDEX_NON_CONTROLLER, 0, NULL); |
| } |
| |
| static void ready_callback(void *user_data) |
| { |
| if (!l_dbus_object_manager_enable(dbus)) |
| l_info("Unable to register the ObjectManager"); |
| } |
| |
| static void usage(void) |
| { |
| l_info("btpclient - Bluetooth tester"); |
| l_info("Usage:"); |
| l_info("\tbtpclient [options]"); |
| l_info("options:\n" |
| "\t-s, --socket <socket> Socket to use for BTP\n" |
| "\t-q, --quiet Don't emit any logs\n" |
| "\t-v, --version Show version\n" |
| "\t-h, --help Show help options"); |
| } |
| |
| static const struct option options[] = { |
| { "socket", 1, 0, 's' }, |
| { "quiet", 0, 0, 'q' }, |
| { "version", 0, 0, 'v' }, |
| { "help", 0, 0, 'h' }, |
| { 0, 0, 0, 0 } |
| }; |
| |
| int main(int argc, char *argv[]) |
| { |
| struct l_dbus_client *client; |
| struct l_signal *signal; |
| sigset_t mask; |
| int opt; |
| |
| l_log_set_stderr(); |
| |
| while ((opt = getopt_long(argc, argv, "+hs:vq", options, NULL)) != -1) { |
| switch (opt) { |
| case 's': |
| socket_path = l_strdup(optarg); |
| break; |
| case 'q': |
| l_log_set_null(); |
| break; |
| case 'd': |
| break; |
| case 'v': |
| l_info("%s", VERSION); |
| return EXIT_SUCCESS; |
| case 'h': |
| default: |
| usage(); |
| return EXIT_SUCCESS; |
| } |
| } |
| |
| if (!socket_path) { |
| l_info("Socket option is required"); |
| l_info("Type --help for usage"); |
| return EXIT_FAILURE; |
| } |
| |
| if (!l_main_init()) |
| return EXIT_FAILURE; |
| |
| |
| adapters = l_queue_new(); |
| |
| sigemptyset(&mask); |
| sigaddset(&mask, SIGINT); |
| sigaddset(&mask, SIGTERM); |
| signal = l_signal_create(&mask, signal_handler, NULL, NULL); |
| |
| dbus = l_dbus_new_default(L_DBUS_SYSTEM_BUS); |
| l_dbus_set_ready_handler(dbus, ready_callback, NULL, NULL); |
| client = l_dbus_client_new(dbus, "org.bluez", "/org/bluez"); |
| |
| l_dbus_client_set_connect_handler(client, client_connected, NULL, NULL); |
| l_dbus_client_set_disconnect_handler(client, client_disconnected, NULL, |
| NULL); |
| |
| l_dbus_client_set_proxy_handlers(client, proxy_added, proxy_removed, |
| property_changed, NULL, NULL); |
| |
| l_dbus_client_set_ready_handler(client, client_ready, NULL, NULL); |
| |
| l_main_run(); |
| |
| l_dbus_client_destroy(client); |
| l_dbus_destroy(dbus); |
| l_signal_remove(signal); |
| btp_cleanup(btp); |
| |
| l_queue_destroy(adapters, (l_queue_destroy_func_t)btp_adapter_free); |
| |
| l_free(socket_path); |
| |
| l_main_exit(); |
| |
| return EXIT_SUCCESS; |
| } |