| /* |
| * |
| * BlueZ - Bluetooth protocol stack for Linux |
| * |
| * Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com> |
| * Copyright (C) 2002-2010 Marcel Holtmann <marcel@holtmann.org> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| */ |
| |
| #ifdef HAVE_CONFIG_H |
| #include <config.h> |
| #endif |
| |
| #include <stdio.h> |
| #include <errno.h> |
| #include <ctype.h> |
| #include <unistd.h> |
| #include <stdlib.h> |
| #include <getopt.h> |
| #include <syslog.h> |
| #include <signal.h> |
| #include <sys/time.h> |
| #include <sys/socket.h> |
| |
| #include "lib/bluetooth.h" |
| #include "lib/sco.h" |
| |
| #include "src/shared/util.h" |
| |
| /* Test modes */ |
| enum { |
| SEND, |
| RECV, |
| RECONNECT, |
| MULTY, |
| DUMP, |
| CONNECT |
| }; |
| |
| static unsigned char *buf; |
| |
| /* Default data size */ |
| static long data_size = 672; |
| |
| static bdaddr_t bdaddr; |
| |
| static int defer_setup = 0; |
| static int voice = 0; |
| |
| static float tv2fl(struct timeval tv) |
| { |
| return (float)tv.tv_sec + (float)(tv.tv_usec/1000000.0); |
| } |
| |
| static int do_connect(char *svr) |
| { |
| struct sockaddr_sco addr; |
| struct sco_conninfo conn; |
| socklen_t optlen; |
| int sk; |
| |
| /* Create socket */ |
| sk = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_SCO); |
| if (sk < 0) { |
| syslog(LOG_ERR, "Can't create socket: %s (%d)", |
| strerror(errno), errno); |
| return -1; |
| } |
| |
| /* Bind to local address */ |
| memset(&addr, 0, sizeof(addr)); |
| addr.sco_family = AF_BLUETOOTH; |
| bacpy(&addr.sco_bdaddr, &bdaddr); |
| |
| if (bind(sk, (struct sockaddr *) &addr, sizeof(addr)) < 0) { |
| syslog(LOG_ERR, "Can't bind socket: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| if (voice) { |
| struct bt_voice opts; |
| |
| /* SCO voice setting */ |
| memset(&opts, 0, sizeof(opts)); |
| opts.setting = voice; |
| if (setsockopt(sk, SOL_BLUETOOTH, BT_VOICE, &opts, sizeof(opts)) < 0) { |
| syslog(LOG_ERR, |
| "Can't set voice socket option: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| } |
| |
| /* Connect to remote device */ |
| memset(&addr, 0, sizeof(addr)); |
| addr.sco_family = AF_BLUETOOTH; |
| str2ba(svr, &addr.sco_bdaddr); |
| |
| if (connect(sk, (struct sockaddr *) &addr, sizeof(addr)) < 0) { |
| syslog(LOG_ERR, "Can't connect: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| /* Get connection information */ |
| memset(&conn, 0, sizeof(conn)); |
| optlen = sizeof(conn); |
| |
| if (getsockopt(sk, SOL_SCO, SCO_CONNINFO, &conn, &optlen) < 0) { |
| syslog(LOG_ERR, "Can't get SCO connection information: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| syslog(LOG_INFO, "Connected [handle %d, class 0x%02x%02x%02x]", |
| conn.hci_handle, |
| conn.dev_class[2], conn.dev_class[1], conn.dev_class[0]); |
| |
| return sk; |
| |
| error: |
| close(sk); |
| return -1; |
| } |
| |
| static void do_listen(void (*handler)(int sk)) |
| { |
| struct sockaddr_sco addr; |
| struct sco_conninfo conn; |
| socklen_t optlen; |
| int sk, nsk; |
| char ba[18]; |
| |
| /* Create socket */ |
| sk = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_SCO); |
| if (sk < 0) { |
| syslog(LOG_ERR, "Can't create socket: %s (%d)", |
| strerror(errno), errno); |
| exit(1); |
| } |
| |
| /* Bind to local address */ |
| memset(&addr, 0, sizeof(addr)); |
| addr.sco_family = AF_BLUETOOTH; |
| bacpy(&addr.sco_bdaddr, &bdaddr); |
| |
| if (bind(sk, (struct sockaddr *) &addr, sizeof(addr)) < 0) { |
| syslog(LOG_ERR, "Can't bind socket: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| /* Enable deferred setup */ |
| if (defer_setup && setsockopt(sk, SOL_BLUETOOTH, BT_DEFER_SETUP, |
| &defer_setup, sizeof(defer_setup)) < 0) { |
| syslog(LOG_ERR, "Can't enable deferred setup : %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| /* Listen for connections */ |
| if (listen(sk, 10)) { |
| syslog(LOG_ERR,"Can not listen on the socket: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| |
| syslog(LOG_INFO,"Waiting for connection ..."); |
| |
| while (1) { |
| memset(&addr, 0, sizeof(addr)); |
| optlen = sizeof(addr); |
| |
| nsk = accept(sk, (struct sockaddr *) &addr, &optlen); |
| if (nsk < 0) { |
| syslog(LOG_ERR,"Accept failed: %s (%d)", |
| strerror(errno), errno); |
| goto error; |
| } |
| if (fork()) { |
| /* Parent */ |
| close(nsk); |
| continue; |
| } |
| /* Child */ |
| close(sk); |
| |
| /* Get connection information */ |
| memset(&conn, 0, sizeof(conn)); |
| optlen = sizeof(conn); |
| |
| if (getsockopt(nsk, SOL_SCO, SCO_CONNINFO, &conn, &optlen) < 0) { |
| syslog(LOG_ERR, "Can't get SCO connection information: %s (%d)", |
| strerror(errno), errno); |
| if (!defer_setup) { |
| close(nsk); |
| exit(1); |
| } |
| } |
| |
| ba2str(&addr.sco_bdaddr, ba); |
| syslog(LOG_INFO, "Connect from %s [handle %d, class 0x%02x%02x%02x]", |
| ba, conn.hci_handle, |
| conn.dev_class[2], conn.dev_class[1], conn.dev_class[0]); |
| |
| /* Handle deferred setup */ |
| if (defer_setup) { |
| syslog(LOG_INFO, "Waiting for %d seconds", |
| abs(defer_setup) - 1); |
| sleep(abs(defer_setup) - 1); |
| |
| if (defer_setup < 0) { |
| close(nsk); |
| exit(1); |
| } |
| } |
| |
| handler(nsk); |
| |
| syslog(LOG_INFO, "Disconnect"); |
| exit(0); |
| } |
| |
| error: |
| close(sk); |
| exit(1); |
| } |
| |
| static void dump_mode(int sk) |
| { |
| struct bt_voice opts; |
| int len; |
| |
| /* SCO voice setting */ |
| memset(&opts, 0, sizeof(opts)); |
| opts.setting = voice; |
| if (setsockopt(sk, SOL_BLUETOOTH, BT_VOICE, &opts, sizeof(opts)) < 0) |
| syslog(LOG_ERR, "Can't set socket options: %s (%d)", |
| strerror(errno), errno); |
| |
| if (defer_setup) { |
| len = read(sk, buf, data_size); |
| if (len < 0) |
| syslog(LOG_ERR, "Initial read error: %s (%d)", |
| strerror(errno), errno); |
| else |
| syslog(LOG_INFO, "Initial bytes %d", len); |
| } |
| |
| syslog(LOG_INFO,"Receiving ..."); |
| while ((len = read(sk, buf, data_size)) > 0) |
| syslog(LOG_INFO, "Received %d bytes", len); |
| } |
| |
| static void recv_mode(int sk) |
| { |
| struct timeval tv_beg,tv_end,tv_diff; |
| struct bt_voice opts; |
| long total; |
| int len; |
| |
| /* SCO voice setting */ |
| memset(&opts, 0, sizeof(opts)); |
| opts.setting = voice; |
| if (setsockopt(sk, SOL_BLUETOOTH, BT_VOICE, &opts, sizeof(opts)) < 0) |
| syslog(LOG_ERR, "Can't set socket options: %s (%d)", |
| strerror(errno), errno); |
| |
| if (defer_setup) { |
| len = read(sk, buf, data_size); |
| if (len < 0) |
| syslog(LOG_ERR, "Initial read error: %s (%d)", |
| strerror(errno), errno); |
| else |
| syslog(LOG_INFO, "Initial bytes %d", len); |
| } |
| |
| syslog(LOG_INFO, "Receiving ..."); |
| |
| while (1) { |
| gettimeofday(&tv_beg, NULL); |
| total = 0; |
| while (total < data_size) { |
| int r; |
| if ((r = recv(sk, buf, data_size, 0)) <= 0) { |
| if (r < 0) |
| syslog(LOG_ERR, "Read failed: %s (%d)", |
| strerror(errno), errno); |
| if (errno != ENOTCONN) |
| return; |
| r = 0; |
| } |
| total += r; |
| } |
| gettimeofday(&tv_end, NULL); |
| |
| timersub(&tv_end, &tv_beg, &tv_diff); |
| |
| syslog(LOG_INFO,"%ld bytes in %.2fm speed %.2f kb", total, |
| tv2fl(tv_diff) / 60.0, |
| (float)( total / tv2fl(tv_diff) ) / 1024.0 ); |
| } |
| } |
| |
| static void send_mode(char *svr) |
| { |
| struct sco_options so; |
| socklen_t len; |
| uint32_t seq; |
| int i, sk; |
| |
| if ((sk = do_connect(svr)) < 0) { |
| syslog(LOG_ERR, "Can't connect to the server: %s (%d)", |
| strerror(errno), errno); |
| exit(1); |
| } |
| |
| len = sizeof(so); |
| if (getsockopt(sk, SOL_SCO, SCO_OPTIONS, &so, &len) < 0) { |
| syslog(LOG_ERR, "Can't get SCO options: %s (%d)", |
| strerror(errno), errno); |
| exit(1); |
| } |
| |
| syslog(LOG_INFO,"Sending ..."); |
| |
| for (i = 6; i < so.mtu; i++) |
| buf[i] = 0x7f; |
| |
| seq = 0; |
| while (1) { |
| put_le32(seq, buf); |
| put_le16(data_size, buf + 4); |
| |
| seq++; |
| |
| if (send(sk, buf, so.mtu, 0) <= 0) { |
| syslog(LOG_ERR, "Send failed: %s (%d)", |
| strerror(errno), errno); |
| exit(1); |
| } |
| |
| usleep(1); |
| } |
| } |
| |
| static void reconnect_mode(char *svr) |
| { |
| while (1) { |
| int sk; |
| |
| if ((sk = do_connect(svr)) < 0) { |
| syslog(LOG_ERR, "Can't connect to the server: %s (%d)", |
| strerror(errno), errno); |
| exit(1); |
| } |
| |
| close(sk); |
| |
| sleep(5); |
| } |
| } |
| |
| static void multy_connect_mode(char *svr) |
| { |
| while (1) { |
| int i, sk; |
| |
| for (i = 0; i < 10; i++){ |
| if (fork()) |
| continue; |
| |
| /* Child */ |
| sk = do_connect(svr); |
| if (sk < 0) { |
| syslog(LOG_ERR, "Can't connect to the server: %s (%d)", |
| strerror(errno), errno); |
| } |
| close(sk); |
| exit(0); |
| } |
| |
| sleep(19); |
| } |
| } |
| |
| static void usage(void) |
| { |
| printf("scotest - SCO testing\n" |
| "Usage:\n"); |
| printf("\tscotest <mode> [options] [bd_addr]\n"); |
| printf("Modes:\n" |
| "\t-d dump (server)\n" |
| "\t-c reconnect (client)\n" |
| "\t-m multiple connects (client)\n" |
| "\t-r receive (server)\n" |
| "\t-s connect and send (client)\n" |
| "\t-n connect and be silent (client)\n" |
| "Options:\n" |
| "\t[-b bytes]\n" |
| "\t[-W seconds] enable deferred setup\n" |
| "\t[-V voice] select SCO voice setting (0x0060 cvsd, 0x0003 transparent)\n"); |
| } |
| |
| int main(int argc ,char *argv[]) |
| { |
| struct sigaction sa; |
| int opt, sk, mode = RECV; |
| |
| while ((opt = getopt(argc, argv, "rdscmnb:W:V:")) != EOF) { |
| switch(opt) { |
| case 'r': |
| mode = RECV; |
| break; |
| |
| case 's': |
| mode = SEND; |
| break; |
| |
| case 'd': |
| mode = DUMP; |
| break; |
| |
| case 'c': |
| mode = RECONNECT; |
| break; |
| |
| case 'm': |
| mode = MULTY; |
| break; |
| |
| case 'n': |
| mode = CONNECT; |
| break; |
| |
| case 'b': |
| data_size = atoi(optarg); |
| break; |
| |
| case 'W': |
| defer_setup = atoi(optarg); |
| break; |
| |
| case 'V': |
| voice = strtol(optarg, NULL, 0); |
| break; |
| |
| default: |
| usage(); |
| exit(1); |
| } |
| } |
| |
| if (!(argc - optind) && (mode != RECV && mode != DUMP)) { |
| usage(); |
| exit(1); |
| } |
| |
| if (!(buf = malloc(data_size))) { |
| perror("Can't allocate data buffer"); |
| exit(1); |
| } |
| |
| memset(&sa, 0, sizeof(sa)); |
| sa.sa_handler = SIG_IGN; |
| sa.sa_flags = SA_NOCLDSTOP; |
| sigaction(SIGCHLD, &sa, NULL); |
| |
| openlog("scotest", LOG_PERROR | LOG_PID, LOG_LOCAL0); |
| |
| switch( mode ){ |
| case RECV: |
| do_listen(recv_mode); |
| break; |
| |
| case DUMP: |
| do_listen(dump_mode); |
| break; |
| |
| case SEND: |
| send_mode(argv[optind]); |
| break; |
| |
| case RECONNECT: |
| reconnect_mode(argv[optind]); |
| break; |
| |
| case MULTY: |
| multy_connect_mode(argv[optind]); |
| break; |
| |
| case CONNECT: |
| sk = do_connect(argv[optind]); |
| if (sk < 0) |
| exit(1); |
| dump_mode(sk); |
| break; |
| } |
| |
| syslog(LOG_INFO, "Exit"); |
| |
| closelog(); |
| |
| return 0; |
| } |