| BlueZ D-Bus Device API description |
| ********************************** |
| |
| Copyright (C) 2004-2010 Marcel Holtmann <marcel@holtmann.org> |
| Copyright (C) 2005-2006 Johan Hedberg <johan.hedberg@nokia.com> |
| Copyright (C) 2005-2006 Claudio Takahasi <claudio.takahasi@indt.org.br> |
| Copyright (C) 2006-2007 Luiz von Dentz <luiz.dentz@indt.org.br> |
| |
| |
| Device hierarchy |
| ================ |
| |
| Service org.bluez |
| Interface org.bluez.Device |
| Object path [variable prefix]/{hci0,hci1,...}/dev_XX_XX_XX_XX_XX_XX |
| |
| Methods dict GetProperties() |
| |
| Returns all properties for the device. See the |
| properties section for available properties. |
| |
| Possible Errors: org.bluez.Error.DoesNotExist |
| org.bluez.Error.InvalidArguments |
| |
| void SetProperty(string name, variant value) |
| |
| Changes the value of the specified property. Only |
| properties that are listed a read-write are changeable. |
| On success this will emit a PropertyChanged signal. |
| |
| Possible Errors: org.bluez.Error.DoesNotExist |
| org.bluez.Error.InvalidArguments |
| |
| dict DiscoverServices(string pattern) |
| |
| This method starts the service discovery to retrieve |
| remote service records. The pattern parameter can |
| be used to specify specific UUIDs. And empty string |
| will look for the public browse group. |
| |
| The return value is a dictionary with the record |
| handles as keys and the service record in XML format |
| as values. The key is uint32 and the value a string |
| for this dictionary. |
| |
| Possible errors: org.bluez.Error.NotReady |
| org.bluez.Error.Failed |
| org.bluez.Error.InProgress |
| |
| void CancelDiscovery() |
| |
| This method will cancel any previous DiscoverServices |
| transaction. |
| |
| Possible errors: org.bluez.Error.NotReady |
| org.bluez.Error.Failed |
| org.bluez.Error.NotAuthorized |
| |
| void Disconnect() |
| |
| This method disconnects a specific remote device by |
| terminating the low-level ACL connection. The use of |
| this method should be restricted to administrator |
| use. |
| |
| A DisconnectRequested signal will be sent and the |
| actual disconnection will only happen 2 seconds later. |
| This enables upper-level applications to terminate |
| their connections gracefully before the ACL connection |
| is terminated. |
| |
| Possible errors: org.bluez.Error.NotConnected |
| |
| array{object} ListNodes() |
| |
| Returns list of device node object paths. |
| |
| Possible errors: org.bluez.Error.InvalidArguments |
| org.bluez.Error.Failed |
| org.bluez.Error.OutOfMemory |
| |
| object CreateNode(string uuid) |
| |
| Creates a persistent device node binding with a |
| remote device. The actual support for the specified |
| UUID depends if the device driver has support for |
| persistent binding. At the moment only RFCOMM TTY |
| nodes are supported. |
| |
| Possible errors: org.bluez.Error.InvalidArguments |
| org.bluez.Error.NotSupported |
| |
| void RemoveNode(object node) |
| |
| Removes a persistent device node binding. |
| |
| Possible errors: org.bluez.Error.InvalidArguments |
| org.bluez.Error.DoesNotExist |
| |
| Signals PropertyChanged(string name, variant value) |
| |
| This signal indicates a changed value of the given |
| property. |
| |
| DisconnectRequested() |
| |
| This signal will be sent when a low level |
| disconnection to a remote device has been requested. |
| The actual disconnection will happen 2 seconds later. |
| |
| NodeCreated(object node) |
| |
| Parameter is object path of created device node. |
| |
| NodeRemoved(object node) |
| |
| Parameter is object path of removed device node. |
| |
| Properties string Address [readonly] |
| |
| The Bluetooth device address of the remote device. |
| |
| string Name [readonly] |
| |
| The Bluetooth remote name. This value can not be |
| changed. Use the Alias property instead. |
| |
| string Icon [readonly] |
| |
| Proposed icon name according to the freedesktop.org |
| icon naming specification. |
| |
| uint32 Class [readonly] |
| |
| The Bluetooth class of device of the remote device. |
| |
| array{string} UUIDs [readonly] |
| |
| List of 128-bit UUIDs that represents the available |
| remote services. |
| |
| boolean Paired [readonly] |
| |
| Indicates if the remote device is paired. |
| |
| boolean Connected [readonly] |
| |
| Indicates if the remote device is currently connected. |
| A PropertyChanged signal indicate changes to this |
| status. |
| |
| boolean Trusted [readwrite] |
| |
| Indicates if the remote is seen as trusted. This |
| setting can be changed by the application. |
| |
| boolean Blocked [readwrite] |
| |
| If set to true any incoming connections from the |
| device will be immediately rejected. Any device |
| drivers will also be removed and no new ones will |
| be probed as long as the device is blocked. |
| |
| string Alias [readwrite] |
| |
| The name alias for the remote device. The alias can |
| be used to have a different friendly name for the |
| remote device. |
| |
| In case no alias is set, it will return the remote |
| device name. Setting an empty string as alias will |
| convert it back to the remote device name. |
| |
| When reseting the alias with an empty string, the |
| emitted PropertyChanged signal will show the remote |
| name again. |
| |
| array{object} Nodes [readonly] |
| |
| List of device node object paths. |
| |
| object Adapter [readonly] |
| |
| The object path of the adpater the device belongs to. |
| |
| boolean LegacyPairing [readonly] |
| |
| Set to true if the device only supports the pre-2.1 |
| pairing mechanism. This property is useful in the |
| Adapter.DeviceFound signal to anticipate whether |
| legacy or simple pairing will occur. |
| |
| Note that this property can exhibit false-positives |
| in the case of Bluetooth 2.1 (or newer) devices that |
| have disabled Extended Inquiry Response support. |