| /* | |
| * Copyright (C) 2007 The Android Open Source Project | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); | |
| * you may not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| #define TRACE_TAG USB | |
| #include "sysdeps.h" | |
| #include <dirent.h> | |
| #include <errno.h> | |
| #include <linux/usb/ch9.h> | |
| #include <linux/usb/functionfs.h> | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <sys/ioctl.h> | |
| #include <sys/mman.h> | |
| #include <sys/types.h> | |
| #include <unistd.h> | |
| #include <algorithm> | |
| #include <atomic> | |
| #include <chrono> | |
| #include <condition_variable> | |
| #include <mutex> | |
| #include <thread> | |
| #include <android-base/logging.h> | |
| #include <android-base/properties.h> | |
| #include "adb.h" | |
| #include "daemon/usb.h" | |
| #include "transport.h" | |
| using namespace std::chrono_literals; | |
| #define MAX_PACKET_SIZE_FS 64 | |
| #define MAX_PACKET_SIZE_HS 512 | |
| #define MAX_PACKET_SIZE_SS 1024 | |
| #define USB_FFS_BULK_SIZE 16384 | |
| // Number of buffers needed to fit MAX_PAYLOAD, with an extra for ZLPs. | |
| #define USB_FFS_NUM_BUFS ((MAX_PAYLOAD / USB_FFS_BULK_SIZE) + 1) | |
| #define cpu_to_le16(x) htole16(x) | |
| #define cpu_to_le32(x) htole32(x) | |
| static int dummy_fd = -1; | |
| struct func_desc { | |
| struct usb_interface_descriptor intf; | |
| struct usb_endpoint_descriptor_no_audio source; | |
| struct usb_endpoint_descriptor_no_audio sink; | |
| } __attribute__((packed)); | |
| struct ss_func_desc { | |
| struct usb_interface_descriptor intf; | |
| struct usb_endpoint_descriptor_no_audio source; | |
| struct usb_ss_ep_comp_descriptor source_comp; | |
| struct usb_endpoint_descriptor_no_audio sink; | |
| struct usb_ss_ep_comp_descriptor sink_comp; | |
| } __attribute__((packed)); | |
| struct desc_v1 { | |
| struct usb_functionfs_descs_head_v1 { | |
| __le32 magic; | |
| __le32 length; | |
| __le32 fs_count; | |
| __le32 hs_count; | |
| } __attribute__((packed)) header; | |
| struct func_desc fs_descs, hs_descs; | |
| } __attribute__((packed)); | |
| struct desc_v2 { | |
| struct usb_functionfs_descs_head_v2 header; | |
| // The rest of the structure depends on the flags in the header. | |
| __le32 fs_count; | |
| __le32 hs_count; | |
| __le32 ss_count; | |
| __le32 os_count; | |
| struct func_desc fs_descs, hs_descs; | |
| struct ss_func_desc ss_descs; | |
| struct usb_os_desc_header os_header; | |
| struct usb_ext_compat_desc os_desc; | |
| } __attribute__((packed)); | |
| static struct func_desc fs_descriptors = { | |
| .intf = { | |
| .bLength = sizeof(fs_descriptors.intf), | |
| .bDescriptorType = USB_DT_INTERFACE, | |
| .bInterfaceNumber = 0, | |
| .bNumEndpoints = 2, | |
| .bInterfaceClass = ADB_CLASS, | |
| .bInterfaceSubClass = ADB_SUBCLASS, | |
| .bInterfaceProtocol = ADB_PROTOCOL, | |
| .iInterface = 1, /* first string from the provided table */ | |
| }, | |
| .source = { | |
| .bLength = sizeof(fs_descriptors.source), | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bEndpointAddress = 1 | USB_DIR_OUT, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = MAX_PACKET_SIZE_FS, | |
| }, | |
| .sink = { | |
| .bLength = sizeof(fs_descriptors.sink), | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bEndpointAddress = 2 | USB_DIR_IN, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = MAX_PACKET_SIZE_FS, | |
| }, | |
| }; | |
| static struct func_desc hs_descriptors = { | |
| .intf = { | |
| .bLength = sizeof(hs_descriptors.intf), | |
| .bDescriptorType = USB_DT_INTERFACE, | |
| .bInterfaceNumber = 0, | |
| .bNumEndpoints = 2, | |
| .bInterfaceClass = ADB_CLASS, | |
| .bInterfaceSubClass = ADB_SUBCLASS, | |
| .bInterfaceProtocol = ADB_PROTOCOL, | |
| .iInterface = 1, /* first string from the provided table */ | |
| }, | |
| .source = { | |
| .bLength = sizeof(hs_descriptors.source), | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bEndpointAddress = 1 | USB_DIR_OUT, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = MAX_PACKET_SIZE_HS, | |
| }, | |
| .sink = { | |
| .bLength = sizeof(hs_descriptors.sink), | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bEndpointAddress = 2 | USB_DIR_IN, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = MAX_PACKET_SIZE_HS, | |
| }, | |
| }; | |
| static struct ss_func_desc ss_descriptors = { | |
| .intf = { | |
| .bLength = sizeof(ss_descriptors.intf), | |
| .bDescriptorType = USB_DT_INTERFACE, | |
| .bInterfaceNumber = 0, | |
| .bNumEndpoints = 2, | |
| .bInterfaceClass = ADB_CLASS, | |
| .bInterfaceSubClass = ADB_SUBCLASS, | |
| .bInterfaceProtocol = ADB_PROTOCOL, | |
| .iInterface = 1, /* first string from the provided table */ | |
| }, | |
| .source = { | |
| .bLength = sizeof(ss_descriptors.source), | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bEndpointAddress = 1 | USB_DIR_OUT, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = MAX_PACKET_SIZE_SS, | |
| }, | |
| .source_comp = { | |
| .bLength = sizeof(ss_descriptors.source_comp), | |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, | |
| .bMaxBurst = 4, | |
| }, | |
| .sink = { | |
| .bLength = sizeof(ss_descriptors.sink), | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bEndpointAddress = 2 | USB_DIR_IN, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = MAX_PACKET_SIZE_SS, | |
| }, | |
| .sink_comp = { | |
| .bLength = sizeof(ss_descriptors.sink_comp), | |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, | |
| .bMaxBurst = 4, | |
| }, | |
| }; | |
| struct usb_ext_compat_desc os_desc_compat = { | |
| .bFirstInterfaceNumber = 0, | |
| .Reserved1 = cpu_to_le32(1), | |
| .CompatibleID = {0}, | |
| .SubCompatibleID = {0}, | |
| .Reserved2 = {0}, | |
| }; | |
| static struct usb_os_desc_header os_desc_header = { | |
| .interface = cpu_to_le32(1), | |
| .dwLength = cpu_to_le32(sizeof(os_desc_header) + sizeof(os_desc_compat)), | |
| .bcdVersion = cpu_to_le32(1), | |
| .wIndex = cpu_to_le32(4), | |
| .bCount = cpu_to_le32(1), | |
| .Reserved = cpu_to_le32(0), | |
| }; | |
| #define STR_INTERFACE_ "ADB Interface" | |
| static const struct { | |
| struct usb_functionfs_strings_head header; | |
| struct { | |
| __le16 code; | |
| const char str1[sizeof(STR_INTERFACE_)]; | |
| } __attribute__((packed)) lang0; | |
| } __attribute__((packed)) strings = { | |
| .header = { | |
| .magic = cpu_to_le32(FUNCTIONFS_STRINGS_MAGIC), | |
| .length = cpu_to_le32(sizeof(strings)), | |
| .str_count = cpu_to_le32(1), | |
| .lang_count = cpu_to_le32(1), | |
| }, | |
| .lang0 = { | |
| cpu_to_le16(0x0409), /* en-us */ | |
| STR_INTERFACE_, | |
| }, | |
| }; | |
| static void aio_block_init(aio_block* aiob) { | |
| aiob->iocb.resize(USB_FFS_NUM_BUFS); | |
| aiob->iocbs.resize(USB_FFS_NUM_BUFS); | |
| aiob->events.resize(USB_FFS_NUM_BUFS); | |
| aiob->num_submitted = 0; | |
| for (unsigned i = 0; i < USB_FFS_NUM_BUFS; i++) { | |
| aiob->iocbs[i] = &aiob->iocb[i]; | |
| } | |
| } | |
| static int getMaxPacketSize(int ffs_fd) { | |
| usb_endpoint_descriptor desc; | |
| if (ioctl(ffs_fd, FUNCTIONFS_ENDPOINT_DESC, reinterpret_cast<unsigned long>(&desc))) { | |
| D("[ could not get endpoint descriptor! (%d) ]", errno); | |
| return MAX_PACKET_SIZE_HS; | |
| } else { | |
| return desc.wMaxPacketSize; | |
| } | |
| } | |
| bool init_functionfs(struct usb_handle* h) { | |
| LOG(INFO) << "initializing functionfs"; | |
| ssize_t ret; | |
| struct desc_v1 v1_descriptor; | |
| struct desc_v2 v2_descriptor; | |
| v2_descriptor.header.magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC_V2); | |
| v2_descriptor.header.length = cpu_to_le32(sizeof(v2_descriptor)); | |
| v2_descriptor.header.flags = FUNCTIONFS_HAS_FS_DESC | FUNCTIONFS_HAS_HS_DESC | | |
| FUNCTIONFS_HAS_SS_DESC | FUNCTIONFS_HAS_MS_OS_DESC; | |
| v2_descriptor.fs_count = 3; | |
| v2_descriptor.hs_count = 3; | |
| v2_descriptor.ss_count = 5; | |
| v2_descriptor.os_count = 1; | |
| v2_descriptor.fs_descs = fs_descriptors; | |
| v2_descriptor.hs_descs = hs_descriptors; | |
| v2_descriptor.ss_descs = ss_descriptors; | |
| v2_descriptor.os_header = os_desc_header; | |
| v2_descriptor.os_desc = os_desc_compat; | |
| if (h->control < 0) { // might have already done this before | |
| LOG(INFO) << "opening control endpoint " << USB_FFS_ADB_EP0; | |
| h->control = adb_open(USB_FFS_ADB_EP0, O_RDWR); | |
| if (h->control < 0) { | |
| PLOG(ERROR) << "cannot open control endpoint " << USB_FFS_ADB_EP0; | |
| goto err; | |
| } | |
| ret = adb_write(h->control, &v2_descriptor, sizeof(v2_descriptor)); | |
| if (ret < 0) { | |
| v1_descriptor.header.magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC); | |
| v1_descriptor.header.length = cpu_to_le32(sizeof(v1_descriptor)); | |
| v1_descriptor.header.fs_count = 3; | |
| v1_descriptor.header.hs_count = 3; | |
| v1_descriptor.fs_descs = fs_descriptors; | |
| v1_descriptor.hs_descs = hs_descriptors; | |
| D("[ %s: Switching to V1_descriptor format errno=%d ]", USB_FFS_ADB_EP0, errno); | |
| ret = adb_write(h->control, &v1_descriptor, sizeof(v1_descriptor)); | |
| if (ret < 0) { | |
| D("[ %s: write descriptors failed: errno=%d ]", USB_FFS_ADB_EP0, errno); | |
| goto err; | |
| } | |
| } | |
| ret = adb_write(h->control, &strings, sizeof(strings)); | |
| if (ret < 0) { | |
| D("[ %s: writing strings failed: errno=%d]", USB_FFS_ADB_EP0, errno); | |
| goto err; | |
| } | |
| //Signal only when writing the descriptors to ffs | |
| android::base::SetProperty("sys.usb.ffs.ready", "1"); | |
| } | |
| h->bulk_out = adb_open(USB_FFS_ADB_OUT, O_RDWR); | |
| if (h->bulk_out < 0) { | |
| PLOG(ERROR) << "cannot open bulk-out endpoint " << USB_FFS_ADB_OUT; | |
| goto err; | |
| } | |
| h->bulk_in = adb_open(USB_FFS_ADB_IN, O_RDWR); | |
| if (h->bulk_in < 0) { | |
| PLOG(ERROR) << "cannot open bulk-in endpoint " << USB_FFS_ADB_IN; | |
| goto err; | |
| } | |
| if (io_setup(USB_FFS_NUM_BUFS, &h->read_aiob.ctx) || | |
| io_setup(USB_FFS_NUM_BUFS, &h->write_aiob.ctx)) { | |
| D("[ aio: got error on io_setup (%d) ]", errno); | |
| } | |
| h->read_aiob.fd = h->bulk_out; | |
| h->write_aiob.fd = h->bulk_in; | |
| return true; | |
| err: | |
| if (h->bulk_in > 0) { | |
| adb_close(h->bulk_in); | |
| h->bulk_in = -1; | |
| } | |
| if (h->bulk_out > 0) { | |
| adb_close(h->bulk_out); | |
| h->bulk_out = -1; | |
| } | |
| if (h->control > 0) { | |
| adb_close(h->control); | |
| h->control = -1; | |
| } | |
| return false; | |
| } | |
| static void usb_ffs_open_thread(void* x) { | |
| struct usb_handle* usb = (struct usb_handle*)x; | |
| adb_thread_setname("usb ffs open"); | |
| while (true) { | |
| // wait until the USB device needs opening | |
| std::unique_lock<std::mutex> lock(usb->lock); | |
| while (!usb->open_new_connection) { | |
| usb->notify.wait(lock); | |
| } | |
| usb->open_new_connection = false; | |
| lock.unlock(); | |
| while (true) { | |
| if (init_functionfs(usb)) { | |
| LOG(INFO) << "functionfs successfully initialized"; | |
| break; | |
| } | |
| std::this_thread::sleep_for(1s); | |
| } | |
| LOG(INFO) << "registering usb transport"; | |
| register_usb_transport(usb, 0, 0, 1); | |
| } | |
| // never gets here | |
| abort(); | |
| } | |
| static int usb_ffs_write(usb_handle* h, const void* data, int len) { | |
| D("about to write (fd=%d, len=%d)", h->bulk_in, len); | |
| const char* buf = static_cast<const char*>(data); | |
| while (len > 0) { | |
| int write_len = std::min(USB_FFS_BULK_SIZE, len); | |
| int n = adb_write(h->bulk_in, buf, write_len); | |
| if (n < 0) { | |
| D("ERROR: fd = %d, n = %d: %s", h->bulk_in, n, strerror(errno)); | |
| return -1; | |
| } | |
| buf += n; | |
| len -= n; | |
| } | |
| D("[ done fd=%d ]", h->bulk_in); | |
| return 0; | |
| } | |
| static int usb_ffs_read(usb_handle* h, void* data, int len) { | |
| D("about to read (fd=%d, len=%d)", h->bulk_out, len); | |
| char* buf = static_cast<char*>(data); | |
| while (len > 0) { | |
| int read_len = std::min(USB_FFS_BULK_SIZE, len); | |
| int n = adb_read(h->bulk_out, buf, read_len); | |
| if (n < 0) { | |
| D("ERROR: fd = %d, n = %d: %s", h->bulk_out, n, strerror(errno)); | |
| return -1; | |
| } | |
| buf += n; | |
| len -= n; | |
| } | |
| D("[ done fd=%d ]", h->bulk_out); | |
| return 0; | |
| } | |
| static int usb_ffs_do_aio(usb_handle* h, const void* data, int len, bool read) { | |
| aio_block* aiob = read ? &h->read_aiob : &h->write_aiob; | |
| bool zero_packet = false; | |
| int num_bufs = len / USB_FFS_BULK_SIZE + (len % USB_FFS_BULK_SIZE == 0 ? 0 : 1); | |
| const char* cur_data = reinterpret_cast<const char*>(data); | |
| int packet_size = getMaxPacketSize(aiob->fd); | |
| if (posix_madvise(const_cast<void*>(data), len, POSIX_MADV_SEQUENTIAL | POSIX_MADV_WILLNEED) < | |
| 0) { | |
| D("[ Failed to madvise: %d ]", errno); | |
| } | |
| for (int i = 0; i < num_bufs; i++) { | |
| int buf_len = std::min(len, USB_FFS_BULK_SIZE); | |
| io_prep(&aiob->iocb[i], aiob->fd, cur_data, buf_len, 0, read); | |
| len -= buf_len; | |
| cur_data += buf_len; | |
| if (len == 0 && buf_len % packet_size == 0 && read) { | |
| // adb does not expect the device to send a zero packet after data transfer, | |
| // but the host *does* send a zero packet for the device to read. | |
| zero_packet = true; | |
| } | |
| } | |
| if (zero_packet) { | |
| io_prep(&aiob->iocb[num_bufs], aiob->fd, reinterpret_cast<const void*>(cur_data), | |
| packet_size, 0, read); | |
| num_bufs += 1; | |
| } | |
| while (true) { | |
| if (TEMP_FAILURE_RETRY(io_submit(aiob->ctx, num_bufs, aiob->iocbs.data())) < num_bufs) { | |
| PLOG(ERROR) << "aio: got error submitting " << (read ? "read" : "write"); | |
| return -1; | |
| } | |
| if (TEMP_FAILURE_RETRY(io_getevents(aiob->ctx, num_bufs, num_bufs, aiob->events.data(), | |
| nullptr)) < num_bufs) { | |
| PLOG(ERROR) << "aio: got error waiting " << (read ? "read" : "write"); | |
| return -1; | |
| } | |
| if (num_bufs == 1 && aiob->events[0].res == -EINTR) { | |
| continue; | |
| } | |
| for (int i = 0; i < num_bufs; i++) { | |
| if (aiob->events[i].res < 0) { | |
| errno = -aiob->events[i].res; | |
| PLOG(ERROR) << "aio: got error event on " << (read ? "read" : "write") | |
| << " total bufs " << num_bufs; | |
| return -1; | |
| } | |
| } | |
| return 0; | |
| } | |
| } | |
| static int usb_ffs_aio_read(usb_handle* h, void* data, int len) { | |
| return usb_ffs_do_aio(h, data, len, true); | |
| } | |
| static int usb_ffs_aio_write(usb_handle* h, const void* data, int len) { | |
| return usb_ffs_do_aio(h, data, len, false); | |
| } | |
| static void usb_ffs_kick(usb_handle* h) { | |
| int err; | |
| err = ioctl(h->bulk_in, FUNCTIONFS_CLEAR_HALT); | |
| if (err < 0) { | |
| D("[ kick: source (fd=%d) clear halt failed (%d) ]", h->bulk_in, errno); | |
| } | |
| err = ioctl(h->bulk_out, FUNCTIONFS_CLEAR_HALT); | |
| if (err < 0) { | |
| D("[ kick: sink (fd=%d) clear halt failed (%d) ]", h->bulk_out, errno); | |
| } | |
| // don't close ep0 here, since we may not need to reinitialize it with | |
| // the same descriptors again. if however ep1/ep2 fail to re-open in | |
| // init_functionfs, only then would we close and open ep0 again. | |
| // Ditto the comment in usb_adb_kick. | |
| h->kicked = true; | |
| TEMP_FAILURE_RETRY(dup2(dummy_fd, h->bulk_out)); | |
| TEMP_FAILURE_RETRY(dup2(dummy_fd, h->bulk_in)); | |
| } | |
| static void usb_ffs_close(usb_handle* h) { | |
| LOG(INFO) << "closing functionfs transport"; | |
| h->kicked = false; | |
| adb_close(h->bulk_out); | |
| adb_close(h->bulk_in); | |
| io_destroy(h->read_aiob.ctx); | |
| io_destroy(h->write_aiob.ctx); | |
| // Notify usb_adb_open_thread to open a new connection. | |
| h->lock.lock(); | |
| h->open_new_connection = true; | |
| h->lock.unlock(); | |
| h->notify.notify_one(); | |
| } | |
| static void usb_ffs_init() { | |
| D("[ usb_init - using FunctionFS ]"); | |
| usb_handle* h = new usb_handle(); | |
| if (android::base::GetBoolProperty("sys.usb.ffs.aio_compat", false)) { | |
| // Devices on older kernels (< 3.18) will not have aio support for ffs | |
| // unless backported. Fall back on the non-aio functions instead. | |
| h->write = usb_ffs_write; | |
| h->read = usb_ffs_read; | |
| } else { | |
| h->write = usb_ffs_aio_write; | |
| h->read = usb_ffs_aio_read; | |
| aio_block_init(&h->read_aiob); | |
| aio_block_init(&h->write_aiob); | |
| } | |
| h->kick = usb_ffs_kick; | |
| h->close = usb_ffs_close; | |
| D("[ usb_init - starting thread ]"); | |
| std::thread(usb_ffs_open_thread, h).detach(); | |
| } | |
| void usb_init() { | |
| dummy_fd = adb_open("/dev/null", O_WRONLY); | |
| CHECK_NE(dummy_fd, -1); | |
| usb_ffs_init(); | |
| } | |
| int usb_write(usb_handle* h, const void* data, int len) { | |
| return h->write(h, data, len); | |
| } | |
| int usb_read(usb_handle* h, void* data, int len) { | |
| return h->read(h, data, len); | |
| } | |
| int usb_close(usb_handle* h) { | |
| h->close(h); | |
| return 0; | |
| } | |
| void usb_kick(usb_handle* h) { | |
| h->kick(h); | |
| } |