| /* | |
| * Copyright (C) 2007 The Android Open Source Project | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); | |
| * you may not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| #include "property_service.h" | |
| #include <ctype.h> | |
| #include <dirent.h> | |
| #include <errno.h> | |
| #include <fcntl.h> | |
| #include <inttypes.h> | |
| #include <limits.h> | |
| #include <netinet/in.h> | |
| #include <stdarg.h> | |
| #include <stddef.h> | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <sys/mman.h> | |
| #include <sys/poll.h> | |
| #include <sys/select.h> | |
| #include <sys/types.h> | |
| #include <sys/un.h> | |
| #include <unistd.h> | |
| #define _REALLY_INCLUDE_SYS__SYSTEM_PROPERTIES_H_ | |
| #include <sys/_system_properties.h> | |
| #include <memory> | |
| #include <queue> | |
| #include <vector> | |
| #include <android-base/chrono_utils.h> | |
| #include <android-base/file.h> | |
| #include <android-base/logging.h> | |
| #include <android-base/properties.h> | |
| #include <android-base/strings.h> | |
| #include <bootimg.h> | |
| #include <fs_mgr.h> | |
| #include <selinux/android.h> | |
| #include <selinux/label.h> | |
| #include <selinux/selinux.h> | |
| #include "init.h" | |
| #include "util.h" | |
| using android::base::Timer; | |
| #define PERSISTENT_PROPERTY_DIR "/data/property" | |
| #define RECOVERY_MOUNT_POINT "/recovery" | |
| namespace android { | |
| namespace init { | |
| static int persistent_properties_loaded = 0; | |
| static int property_set_fd = -1; | |
| void property_init() { | |
| if (__system_property_area_init()) { | |
| LOG(ERROR) << "Failed to initialize property area"; | |
| exit(1); | |
| } | |
| } | |
| static bool check_mac_perms(const std::string& name, char* sctx, struct ucred* cr) { | |
| if (!sctx) { | |
| return false; | |
| } | |
| if (!sehandle_prop) { | |
| return false; | |
| } | |
| char* tctx = nullptr; | |
| if (selabel_lookup(sehandle_prop, &tctx, name.c_str(), 1) != 0) { | |
| return false; | |
| } | |
| property_audit_data audit_data; | |
| audit_data.name = name.c_str(); | |
| audit_data.cr = cr; | |
| bool has_access = (selinux_check_access(sctx, tctx, "property_service", "set", &audit_data) == 0); | |
| freecon(tctx); | |
| return has_access; | |
| } | |
| static int check_control_mac_perms(const char *name, char *sctx, struct ucred *cr) | |
| { | |
| /* | |
| * Create a name prefix out of ctl.<service name> | |
| * The new prefix allows the use of the existing | |
| * property service backend labeling while avoiding | |
| * mislabels based on true property prefixes. | |
| */ | |
| char ctl_name[PROP_VALUE_MAX+4]; | |
| int ret = snprintf(ctl_name, sizeof(ctl_name), "ctl.%s", name); | |
| if (ret < 0 || (size_t) ret >= sizeof(ctl_name)) | |
| return 0; | |
| return check_mac_perms(ctl_name, sctx, cr); | |
| } | |
| static void write_persistent_property(const char *name, const char *value) | |
| { | |
| char tempPath[PATH_MAX]; | |
| char path[PATH_MAX]; | |
| int fd; | |
| snprintf(tempPath, sizeof(tempPath), "%s/.temp.XXXXXX", PERSISTENT_PROPERTY_DIR); | |
| fd = mkstemp(tempPath); | |
| if (fd < 0) { | |
| PLOG(ERROR) << "Unable to write persistent property to temp file " << tempPath; | |
| return; | |
| } | |
| write(fd, value, strlen(value)); | |
| fsync(fd); | |
| close(fd); | |
| snprintf(path, sizeof(path), "%s/%s", PERSISTENT_PROPERTY_DIR, name); | |
| if (rename(tempPath, path)) { | |
| PLOG(ERROR) << "Unable to rename persistent property file " << tempPath << " to " << path; | |
| unlink(tempPath); | |
| } | |
| } | |
| bool is_legal_property_name(const std::string& name) { | |
| size_t namelen = name.size(); | |
| if (namelen < 1) return false; | |
| if (name[0] == '.') return false; | |
| if (name[namelen - 1] == '.') return false; | |
| /* Only allow alphanumeric, plus '.', '-', '@', ':', or '_' */ | |
| /* Don't allow ".." to appear in a property name */ | |
| for (size_t i = 0; i < namelen; i++) { | |
| if (name[i] == '.') { | |
| // i=0 is guaranteed to never have a dot. See above. | |
| if (name[i-1] == '.') return false; | |
| continue; | |
| } | |
| if (name[i] == '_' || name[i] == '-' || name[i] == '@' || name[i] == ':') continue; | |
| if (name[i] >= 'a' && name[i] <= 'z') continue; | |
| if (name[i] >= 'A' && name[i] <= 'Z') continue; | |
| if (name[i] >= '0' && name[i] <= '9') continue; | |
| return false; | |
| } | |
| return true; | |
| } | |
| static uint32_t PropertySetImpl(const std::string& name, const std::string& value) { | |
| size_t valuelen = value.size(); | |
| if (!is_legal_property_name(name)) { | |
| LOG(ERROR) << "property_set(\"" << name << "\", \"" << value << "\") failed: bad name"; | |
| return PROP_ERROR_INVALID_NAME; | |
| } | |
| if (valuelen >= PROP_VALUE_MAX) { | |
| LOG(ERROR) << "property_set(\"" << name << "\", \"" << value << "\") failed: " | |
| << "value too long"; | |
| return PROP_ERROR_INVALID_VALUE; | |
| } | |
| prop_info* pi = (prop_info*) __system_property_find(name.c_str()); | |
| if (pi != nullptr) { | |
| // ro.* properties are actually "write-once". | |
| if (android::base::StartsWith(name, "ro.")) { | |
| LOG(ERROR) << "property_set(\"" << name << "\", \"" << value << "\") failed: " | |
| << "property already set"; | |
| return PROP_ERROR_READ_ONLY_PROPERTY; | |
| } | |
| __system_property_update(pi, value.c_str(), valuelen); | |
| } else { | |
| int rc = __system_property_add(name.c_str(), name.size(), value.c_str(), valuelen); | |
| if (rc < 0) { | |
| LOG(ERROR) << "property_set(\"" << name << "\", \"" << value << "\") failed: " | |
| << "__system_property_add failed"; | |
| return PROP_ERROR_SET_FAILED; | |
| } | |
| } | |
| // Don't write properties to disk until after we have read all default | |
| // properties to prevent them from being overwritten by default values. | |
| if (persistent_properties_loaded && android::base::StartsWith(name, "persist.")) { | |
| write_persistent_property(name.c_str(), value.c_str()); | |
| } | |
| property_changed(name, value); | |
| return PROP_SUCCESS; | |
| } | |
| typedef int (*PropertyAsyncFunc)(const std::string&, const std::string&); | |
| struct PropertyChildInfo { | |
| pid_t pid; | |
| PropertyAsyncFunc func; | |
| std::string name; | |
| std::string value; | |
| }; | |
| static std::queue<PropertyChildInfo> property_children; | |
| static void PropertyChildLaunch() { | |
| auto& info = property_children.front(); | |
| pid_t pid = fork(); | |
| if (pid < 0) { | |
| LOG(ERROR) << "Failed to fork for property_set_async"; | |
| while (!property_children.empty()) { | |
| property_children.pop(); | |
| } | |
| return; | |
| } | |
| if (pid != 0) { | |
| info.pid = pid; | |
| } else { | |
| if (info.func(info.name, info.value) != 0) { | |
| LOG(ERROR) << "property_set_async(\"" << info.name << "\", \"" << info.value | |
| << "\") failed"; | |
| } | |
| exit(0); | |
| } | |
| } | |
| bool PropertyChildReap(pid_t pid) { | |
| if (property_children.empty()) { | |
| return false; | |
| } | |
| auto& info = property_children.front(); | |
| if (info.pid != pid) { | |
| return false; | |
| } | |
| if (PropertySetImpl(info.name, info.value) != PROP_SUCCESS) { | |
| LOG(ERROR) << "Failed to set async property " << info.name; | |
| } | |
| property_children.pop(); | |
| if (!property_children.empty()) { | |
| PropertyChildLaunch(); | |
| } | |
| return true; | |
| } | |
| static uint32_t PropertySetAsync(const std::string& name, const std::string& value, | |
| PropertyAsyncFunc func) { | |
| if (value.empty()) { | |
| return PropertySetImpl(name, value); | |
| } | |
| PropertyChildInfo info; | |
| info.func = func; | |
| info.name = name; | |
| info.value = value; | |
| property_children.push(info); | |
| if (property_children.size() == 1) { | |
| PropertyChildLaunch(); | |
| } | |
| return PROP_SUCCESS; | |
| } | |
| static int RestoreconRecursiveAsync(const std::string& name, const std::string& value) { | |
| return selinux_android_restorecon(value.c_str(), SELINUX_ANDROID_RESTORECON_RECURSE); | |
| } | |
| uint32_t property_set(const std::string& name, const std::string& value) { | |
| if (name == "selinux.restorecon_recursive") { | |
| return PropertySetAsync(name, value, RestoreconRecursiveAsync); | |
| } | |
| return PropertySetImpl(name, value); | |
| } | |
| class SocketConnection { | |
| public: | |
| SocketConnection(int socket, const struct ucred& cred) | |
| : socket_(socket), cred_(cred) {} | |
| ~SocketConnection() { | |
| close(socket_); | |
| } | |
| bool RecvUint32(uint32_t* value, uint32_t* timeout_ms) { | |
| return RecvFully(value, sizeof(*value), timeout_ms); | |
| } | |
| bool RecvChars(char* chars, size_t size, uint32_t* timeout_ms) { | |
| return RecvFully(chars, size, timeout_ms); | |
| } | |
| bool RecvString(std::string* value, uint32_t* timeout_ms) { | |
| uint32_t len = 0; | |
| if (!RecvUint32(&len, timeout_ms)) { | |
| return false; | |
| } | |
| if (len == 0) { | |
| *value = ""; | |
| return true; | |
| } | |
| // http://b/35166374: don't allow init to make arbitrarily large allocations. | |
| if (len > 0xffff) { | |
| LOG(ERROR) << "sys_prop: RecvString asked to read huge string: " << len; | |
| errno = ENOMEM; | |
| return false; | |
| } | |
| std::vector<char> chars(len); | |
| if (!RecvChars(&chars[0], len, timeout_ms)) { | |
| return false; | |
| } | |
| *value = std::string(&chars[0], len); | |
| return true; | |
| } | |
| bool SendUint32(uint32_t value) { | |
| int result = TEMP_FAILURE_RETRY(send(socket_, &value, sizeof(value), 0)); | |
| return result == sizeof(value); | |
| } | |
| int socket() { | |
| return socket_; | |
| } | |
| const struct ucred& cred() { | |
| return cred_; | |
| } | |
| private: | |
| bool PollIn(uint32_t* timeout_ms) { | |
| struct pollfd ufds[1]; | |
| ufds[0].fd = socket_; | |
| ufds[0].events = POLLIN; | |
| ufds[0].revents = 0; | |
| while (*timeout_ms > 0) { | |
| Timer timer; | |
| int nr = poll(ufds, 1, *timeout_ms); | |
| uint64_t millis = timer.duration().count(); | |
| *timeout_ms = (millis > *timeout_ms) ? 0 : *timeout_ms - millis; | |
| if (nr > 0) { | |
| return true; | |
| } | |
| if (nr == 0) { | |
| // Timeout | |
| break; | |
| } | |
| if (nr < 0 && errno != EINTR) { | |
| PLOG(ERROR) << "sys_prop: error waiting for uid " << cred_.uid << " to send property message"; | |
| return false; | |
| } else { // errno == EINTR | |
| // Timer rounds milliseconds down in case of EINTR we want it to be rounded up | |
| // to avoid slowing init down by causing EINTR with under millisecond timeout. | |
| if (*timeout_ms > 0) { | |
| --(*timeout_ms); | |
| } | |
| } | |
| } | |
| LOG(ERROR) << "sys_prop: timeout waiting for uid " << cred_.uid << " to send property message."; | |
| return false; | |
| } | |
| bool RecvFully(void* data_ptr, size_t size, uint32_t* timeout_ms) { | |
| size_t bytes_left = size; | |
| char* data = static_cast<char*>(data_ptr); | |
| while (*timeout_ms > 0 && bytes_left > 0) { | |
| if (!PollIn(timeout_ms)) { | |
| return false; | |
| } | |
| int result = TEMP_FAILURE_RETRY(recv(socket_, data, bytes_left, MSG_DONTWAIT)); | |
| if (result <= 0) { | |
| return false; | |
| } | |
| bytes_left -= result; | |
| data += result; | |
| } | |
| return bytes_left == 0; | |
| } | |
| int socket_; | |
| struct ucred cred_; | |
| DISALLOW_IMPLICIT_CONSTRUCTORS(SocketConnection); | |
| }; | |
| static void handle_property_set(SocketConnection& socket, | |
| const std::string& name, | |
| const std::string& value, | |
| bool legacy_protocol) { | |
| const char* cmd_name = legacy_protocol ? "PROP_MSG_SETPROP" : "PROP_MSG_SETPROP2"; | |
| if (!is_legal_property_name(name)) { | |
| LOG(ERROR) << "sys_prop(" << cmd_name << "): illegal property name \"" << name << "\""; | |
| socket.SendUint32(PROP_ERROR_INVALID_NAME); | |
| return; | |
| } | |
| struct ucred cr = socket.cred(); | |
| char* source_ctx = nullptr; | |
| getpeercon(socket.socket(), &source_ctx); | |
| if (android::base::StartsWith(name, "ctl.")) { | |
| if (check_control_mac_perms(value.c_str(), source_ctx, &cr)) { | |
| handle_control_message(name.c_str() + 4, value.c_str()); | |
| if (!legacy_protocol) { | |
| socket.SendUint32(PROP_SUCCESS); | |
| } | |
| } else { | |
| LOG(ERROR) << "sys_prop(" << cmd_name << "): Unable to " << (name.c_str() + 4) | |
| << " service ctl [" << value << "]" | |
| << " uid:" << cr.uid | |
| << " gid:" << cr.gid | |
| << " pid:" << cr.pid; | |
| if (!legacy_protocol) { | |
| socket.SendUint32(PROP_ERROR_HANDLE_CONTROL_MESSAGE); | |
| } | |
| } | |
| } else { | |
| if (check_mac_perms(name, source_ctx, &cr)) { | |
| uint32_t result = property_set(name, value); | |
| if (!legacy_protocol) { | |
| socket.SendUint32(result); | |
| } | |
| } else { | |
| LOG(ERROR) << "sys_prop(" << cmd_name << "): permission denied uid:" << cr.uid << " name:" << name; | |
| if (!legacy_protocol) { | |
| socket.SendUint32(PROP_ERROR_PERMISSION_DENIED); | |
| } | |
| } | |
| } | |
| freecon(source_ctx); | |
| } | |
| static void handle_property_set_fd() { | |
| static constexpr uint32_t kDefaultSocketTimeout = 2000; /* ms */ | |
| int s = accept4(property_set_fd, nullptr, nullptr, SOCK_CLOEXEC); | |
| if (s == -1) { | |
| return; | |
| } | |
| struct ucred cr; | |
| socklen_t cr_size = sizeof(cr); | |
| if (getsockopt(s, SOL_SOCKET, SO_PEERCRED, &cr, &cr_size) < 0) { | |
| close(s); | |
| PLOG(ERROR) << "sys_prop: unable to get SO_PEERCRED"; | |
| return; | |
| } | |
| SocketConnection socket(s, cr); | |
| uint32_t timeout_ms = kDefaultSocketTimeout; | |
| uint32_t cmd = 0; | |
| if (!socket.RecvUint32(&cmd, &timeout_ms)) { | |
| PLOG(ERROR) << "sys_prop: error while reading command from the socket"; | |
| socket.SendUint32(PROP_ERROR_READ_CMD); | |
| return; | |
| } | |
| switch (cmd) { | |
| case PROP_MSG_SETPROP: { | |
| char prop_name[PROP_NAME_MAX]; | |
| char prop_value[PROP_VALUE_MAX]; | |
| if (!socket.RecvChars(prop_name, PROP_NAME_MAX, &timeout_ms) || | |
| !socket.RecvChars(prop_value, PROP_VALUE_MAX, &timeout_ms)) { | |
| PLOG(ERROR) << "sys_prop(PROP_MSG_SETPROP): error while reading name/value from the socket"; | |
| return; | |
| } | |
| prop_name[PROP_NAME_MAX-1] = 0; | |
| prop_value[PROP_VALUE_MAX-1] = 0; | |
| handle_property_set(socket, prop_value, prop_value, true); | |
| break; | |
| } | |
| case PROP_MSG_SETPROP2: { | |
| std::string name; | |
| std::string value; | |
| if (!socket.RecvString(&name, &timeout_ms) || | |
| !socket.RecvString(&value, &timeout_ms)) { | |
| PLOG(ERROR) << "sys_prop(PROP_MSG_SETPROP2): error while reading name/value from the socket"; | |
| socket.SendUint32(PROP_ERROR_READ_DATA); | |
| return; | |
| } | |
| handle_property_set(socket, name, value, false); | |
| break; | |
| } | |
| default: | |
| LOG(ERROR) << "sys_prop: invalid command " << cmd; | |
| socket.SendUint32(PROP_ERROR_INVALID_CMD); | |
| break; | |
| } | |
| } | |
| static bool load_properties_from_file(const char *, const char *); | |
| /* | |
| * Filter is used to decide which properties to load: NULL loads all keys, | |
| * "ro.foo.*" is a prefix match, and "ro.foo.bar" is an exact match. | |
| */ | |
| static void load_properties(char *data, const char *filter) | |
| { | |
| char *key, *value, *eol, *sol, *tmp, *fn; | |
| size_t flen = 0; | |
| if (filter) { | |
| flen = strlen(filter); | |
| } | |
| sol = data; | |
| while ((eol = strchr(sol, '\n'))) { | |
| key = sol; | |
| *eol++ = 0; | |
| sol = eol; | |
| while (isspace(*key)) key++; | |
| if (*key == '#') continue; | |
| tmp = eol - 2; | |
| while ((tmp > key) && isspace(*tmp)) *tmp-- = 0; | |
| if (!strncmp(key, "import ", 7) && flen == 0) { | |
| fn = key + 7; | |
| while (isspace(*fn)) fn++; | |
| key = strchr(fn, ' '); | |
| if (key) { | |
| *key++ = 0; | |
| while (isspace(*key)) key++; | |
| } | |
| load_properties_from_file(fn, key); | |
| } else { | |
| value = strchr(key, '='); | |
| if (!value) continue; | |
| *value++ = 0; | |
| tmp = value - 2; | |
| while ((tmp > key) && isspace(*tmp)) *tmp-- = 0; | |
| while (isspace(*value)) value++; | |
| if (flen > 0) { | |
| if (filter[flen - 1] == '*') { | |
| if (strncmp(key, filter, flen - 1)) continue; | |
| } else { | |
| if (strcmp(key, filter)) continue; | |
| } | |
| } | |
| property_set(key, value); | |
| } | |
| } | |
| } | |
| // Filter is used to decide which properties to load: NULL loads all keys, | |
| // "ro.foo.*" is a prefix match, and "ro.foo.bar" is an exact match. | |
| static bool load_properties_from_file(const char* filename, const char* filter) { | |
| Timer t; | |
| std::string data; | |
| std::string err; | |
| if (!ReadFile(filename, &data, &err)) { | |
| PLOG(WARNING) << "Couldn't load property file: " << err; | |
| return false; | |
| } | |
| data.push_back('\n'); | |
| load_properties(&data[0], filter); | |
| LOG(VERBOSE) << "(Loading properties from " << filename << " took " << t << ".)"; | |
| return true; | |
| } | |
| static void load_persistent_properties() { | |
| persistent_properties_loaded = 1; | |
| std::unique_ptr<DIR, int(*)(DIR*)> dir(opendir(PERSISTENT_PROPERTY_DIR), closedir); | |
| if (!dir) { | |
| PLOG(ERROR) << "Unable to open persistent property directory \"" | |
| << PERSISTENT_PROPERTY_DIR << "\""; | |
| return; | |
| } | |
| struct dirent* entry; | |
| while ((entry = readdir(dir.get())) != NULL) { | |
| if (strncmp("persist.", entry->d_name, strlen("persist."))) { | |
| continue; | |
| } | |
| if (entry->d_type != DT_REG) { | |
| continue; | |
| } | |
| // Open the file and read the property value. | |
| int fd = openat(dirfd(dir.get()), entry->d_name, O_RDONLY | O_NOFOLLOW); | |
| if (fd == -1) { | |
| PLOG(ERROR) << "Unable to open persistent property file \"" << entry->d_name << "\""; | |
| continue; | |
| } | |
| struct stat sb; | |
| if (fstat(fd, &sb) == -1) { | |
| PLOG(ERROR) << "fstat on property file \"" << entry->d_name << "\" failed"; | |
| close(fd); | |
| continue; | |
| } | |
| // File must not be accessible to others, be owned by root/root, and | |
| // not be a hard link to any other file. | |
| if (((sb.st_mode & (S_IRWXG | S_IRWXO)) != 0) || sb.st_uid != 0 || sb.st_gid != 0 || sb.st_nlink != 1) { | |
| PLOG(ERROR) << "skipping insecure property file " << entry->d_name | |
| << " (uid=" << sb.st_uid << " gid=" << sb.st_gid | |
| << " nlink=" << sb.st_nlink << " mode=" << std::oct << sb.st_mode << ")"; | |
| close(fd); | |
| continue; | |
| } | |
| char value[PROP_VALUE_MAX]; | |
| int length = read(fd, value, sizeof(value) - 1); | |
| if (length >= 0) { | |
| value[length] = 0; | |
| property_set(entry->d_name, value); | |
| } else { | |
| PLOG(ERROR) << "Unable to read persistent property file " << entry->d_name; | |
| } | |
| close(fd); | |
| } | |
| } | |
| // persist.sys.usb.config values can't be combined on build-time when property | |
| // files are split into each partition. | |
| // So we need to apply the same rule of build/make/tools/post_process_props.py | |
| // on runtime. | |
| static void update_sys_usb_config() { | |
| bool is_debuggable = android::base::GetBoolProperty("ro.debuggable", false); | |
| std::string config = android::base::GetProperty("persist.sys.usb.config", ""); | |
| if (config.empty()) { | |
| property_set("persist.sys.usb.config", is_debuggable ? "adb" : "none"); | |
| } else if (is_debuggable && config.find("adb") == std::string::npos && | |
| config.length() + 4 < PROP_VALUE_MAX) { | |
| config.append(",adb"); | |
| property_set("persist.sys.usb.config", config); | |
| } | |
| } | |
| void property_load_boot_defaults() { | |
| if (!load_properties_from_file("/system/etc/prop.default", NULL)) { | |
| // Try recovery path | |
| if (!load_properties_from_file("/prop.default", NULL)) { | |
| // Try legacy path | |
| load_properties_from_file("/default.prop", NULL); | |
| } | |
| } | |
| load_properties_from_file("/odm/default.prop", NULL); | |
| load_properties_from_file("/vendor/default.prop", NULL); | |
| update_sys_usb_config(); | |
| } | |
| static void load_override_properties() { | |
| if (ALLOW_LOCAL_PROP_OVERRIDE) { | |
| load_properties_from_file("/data/local.prop", NULL); | |
| } | |
| } | |
| /* When booting an encrypted system, /data is not mounted when the | |
| * property service is started, so any properties stored there are | |
| * not loaded. Vold triggers init to load these properties once it | |
| * has mounted /data. | |
| */ | |
| void load_persist_props(void) { | |
| load_override_properties(); | |
| /* Read persistent properties after all default values have been loaded. */ | |
| load_persistent_properties(); | |
| property_set("ro.persistent_properties.ready", "true"); | |
| } | |
| void load_recovery_id_prop() { | |
| std::unique_ptr<fstab, decltype(&fs_mgr_free_fstab)> fstab(fs_mgr_read_fstab_default(), | |
| fs_mgr_free_fstab); | |
| if (!fstab) { | |
| PLOG(ERROR) << "unable to read default fstab"; | |
| return; | |
| } | |
| fstab_rec* rec = fs_mgr_get_entry_for_mount_point(fstab.get(), RECOVERY_MOUNT_POINT); | |
| if (rec == NULL) { | |
| LOG(ERROR) << "/recovery not specified in fstab"; | |
| return; | |
| } | |
| int fd = open(rec->blk_device, O_RDONLY); | |
| if (fd == -1) { | |
| PLOG(ERROR) << "error opening block device " << rec->blk_device; | |
| return; | |
| } | |
| boot_img_hdr hdr; | |
| if (android::base::ReadFully(fd, &hdr, sizeof(hdr))) { | |
| std::string hex = bytes_to_hex(reinterpret_cast<uint8_t*>(hdr.id), sizeof(hdr.id)); | |
| property_set("ro.recovery_id", hex); | |
| } else { | |
| PLOG(ERROR) << "error reading /recovery"; | |
| } | |
| close(fd); | |
| } | |
| void load_system_props() { | |
| load_properties_from_file("/system/build.prop", NULL); | |
| load_properties_from_file("/odm/build.prop", NULL); | |
| load_properties_from_file("/vendor/build.prop", NULL); | |
| load_properties_from_file("/factory/factory.prop", "ro.*"); | |
| load_recovery_id_prop(); | |
| } | |
| void start_property_service() { | |
| property_set("ro.property_service.version", "2"); | |
| property_set_fd = CreateSocket(PROP_SERVICE_NAME, SOCK_STREAM | SOCK_CLOEXEC | SOCK_NONBLOCK, | |
| false, 0666, 0, 0, nullptr, sehandle); | |
| if (property_set_fd == -1) { | |
| PLOG(ERROR) << "start_property_service socket creation failed"; | |
| exit(1); | |
| } | |
| listen(property_set_fd, 8); | |
| register_epoll_handler(property_set_fd, handle_property_set_fd); | |
| } | |
| } // namespace init | |
| } // namespace android |