| /* | |
| * Copyright (C) 2007 The Android Open Source Project | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); | |
| * you may not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| #define TRACE_TAG TRACE_ADB | |
| #include "sysdeps.h" | |
| #include "adb.h" | |
| #include <ctype.h> | |
| #include <errno.h> | |
| #include <stdarg.h> | |
| #include <stddef.h> | |
| #include <stdint.h> | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <sys/time.h> | |
| #include <time.h> | |
| #include <string> | |
| #include <base/stringprintf.h> | |
| #include <base/strings.h> | |
| #include "adb_auth.h" | |
| #include "adb_io.h" | |
| #include "adb_listeners.h" | |
| #include "transport.h" | |
| #define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0])) | |
| #if !ADB_HOST | |
| #include <cutils/properties.h> | |
| #include <sys/capability.h> | |
| #include <sys/mount.h> | |
| #endif | |
| #if ADB_TRACE | |
| ADB_MUTEX_DEFINE( D_lock ); | |
| #endif | |
| int HOST = 0; | |
| #if !ADB_HOST | |
| const char *adb_device_banner = "device"; | |
| #endif | |
| void fatal(const char *fmt, ...) | |
| { | |
| va_list ap; | |
| va_start(ap, fmt); | |
| fprintf(stderr, "error: "); | |
| vfprintf(stderr, fmt, ap); | |
| fprintf(stderr, "\n"); | |
| va_end(ap); | |
| exit(-1); | |
| } | |
| void fatal_errno(const char *fmt, ...) | |
| { | |
| va_list ap; | |
| va_start(ap, fmt); | |
| fprintf(stderr, "error: %s: ", strerror(errno)); | |
| vfprintf(stderr, fmt, ap); | |
| fprintf(stderr, "\n"); | |
| va_end(ap); | |
| exit(-1); | |
| } | |
| #if !ADB_HOST | |
| void start_device_log(void) { | |
| struct tm now; | |
| time_t t; | |
| tzset(); | |
| time(&t); | |
| localtime_r(&t, &now); | |
| char timestamp[PATH_MAX]; | |
| strftime(timestamp, sizeof(timestamp), "%Y-%m-%d-%H-%M-%S", &now); | |
| char path[PATH_MAX]; | |
| snprintf(path, sizeof(path), "/data/adb/adb-%s-%d", timestamp, getpid()); | |
| int fd = unix_open(path, O_WRONLY | O_CREAT | O_TRUNC | O_CLOEXEC, 0640); | |
| if (fd == -1) { | |
| return; | |
| } | |
| // redirect stdout and stderr to the log file | |
| dup2(fd, STDOUT_FILENO); | |
| dup2(fd, STDERR_FILENO); | |
| fprintf(stderr, "--- adb starting (pid %d) ---\n", getpid()); | |
| adb_close(fd); | |
| } | |
| #endif | |
| int adb_trace_mask; | |
| std::string get_trace_setting_from_env() { | |
| const char* setting = getenv("ADB_TRACE"); | |
| if (setting == nullptr) { | |
| setting = ""; | |
| } | |
| return std::string(setting); | |
| } | |
| #if !ADB_HOST | |
| std::string get_trace_setting_from_prop() { | |
| char buf[PROPERTY_VALUE_MAX]; | |
| property_get("persist.adb.trace_mask", buf, ""); | |
| return std::string(buf); | |
| } | |
| #endif | |
| std::string get_trace_setting() { | |
| #if ADB_HOST | |
| return get_trace_setting_from_env(); | |
| #else | |
| return get_trace_setting_from_prop(); | |
| #endif | |
| } | |
| // Split the comma/space/colum/semi-column separated list of tags from the trace | |
| // setting and build the trace mask from it. note that '1' and 'all' are special | |
| // cases to enable all tracing. | |
| // | |
| // adb's trace setting comes from the ADB_TRACE environment variable, whereas | |
| // adbd's comes from the system property persist.adb.trace_mask. | |
| void adb_trace_init() { | |
| const std::string trace_setting = get_trace_setting(); | |
| static const struct { | |
| const char* tag; | |
| int flag; | |
| } tags[] = { | |
| { "1", 0 }, | |
| { "all", 0 }, | |
| { "adb", TRACE_ADB }, | |
| { "sockets", TRACE_SOCKETS }, | |
| { "packets", TRACE_PACKETS }, | |
| { "rwx", TRACE_RWX }, | |
| { "usb", TRACE_USB }, | |
| { "sync", TRACE_SYNC }, | |
| { "sysdeps", TRACE_SYSDEPS }, | |
| { "transport", TRACE_TRANSPORT }, | |
| { "jdwp", TRACE_JDWP }, | |
| { "services", TRACE_SERVICES }, | |
| { "auth", TRACE_AUTH }, | |
| { NULL, 0 } | |
| }; | |
| if (trace_setting.empty()) { | |
| return; | |
| } | |
| // Use a comma/colon/semi-colon/space separated list | |
| const char* p = trace_setting.c_str(); | |
| while (*p) { | |
| int len, tagn; | |
| const char* q = strpbrk(p, " ,:;"); | |
| if (q == NULL) { | |
| q = p + strlen(p); | |
| } | |
| len = q - p; | |
| for (tagn = 0; tags[tagn].tag != NULL; tagn++) { | |
| int taglen = strlen(tags[tagn].tag); | |
| if (len == taglen && !memcmp(tags[tagn].tag, p, len)) { | |
| int flag = tags[tagn].flag; | |
| if (flag == 0) { | |
| adb_trace_mask = ~0; | |
| return; | |
| } | |
| adb_trace_mask |= (1 << flag); | |
| break; | |
| } | |
| } | |
| p = q; | |
| if (*p) | |
| p++; | |
| } | |
| #if !ADB_HOST | |
| start_device_log(); | |
| #endif | |
| } | |
| apacket* get_apacket(void) | |
| { | |
| apacket* p = reinterpret_cast<apacket*>(malloc(sizeof(apacket))); | |
| if (p == nullptr) { | |
| fatal("failed to allocate an apacket"); | |
| } | |
| memset(p, 0, sizeof(apacket) - MAX_PAYLOAD); | |
| return p; | |
| } | |
| void put_apacket(apacket *p) | |
| { | |
| free(p); | |
| } | |
| void handle_online(atransport *t) | |
| { | |
| D("adb: online\n"); | |
| t->online = 1; | |
| } | |
| void handle_offline(atransport *t) | |
| { | |
| D("adb: offline\n"); | |
| //Close the associated usb | |
| t->online = 0; | |
| run_transport_disconnects(t); | |
| } | |
| #if DEBUG_PACKETS | |
| #define DUMPMAX 32 | |
| void print_packet(const char *label, apacket *p) | |
| { | |
| char *tag; | |
| char *x; | |
| unsigned count; | |
| switch(p->msg.command){ | |
| case A_SYNC: tag = "SYNC"; break; | |
| case A_CNXN: tag = "CNXN" ; break; | |
| case A_OPEN: tag = "OPEN"; break; | |
| case A_OKAY: tag = "OKAY"; break; | |
| case A_CLSE: tag = "CLSE"; break; | |
| case A_WRTE: tag = "WRTE"; break; | |
| case A_AUTH: tag = "AUTH"; break; | |
| default: tag = "????"; break; | |
| } | |
| fprintf(stderr, "%s: %s %08x %08x %04x \"", | |
| label, tag, p->msg.arg0, p->msg.arg1, p->msg.data_length); | |
| count = p->msg.data_length; | |
| x = (char*) p->data; | |
| if(count > DUMPMAX) { | |
| count = DUMPMAX; | |
| tag = "\n"; | |
| } else { | |
| tag = "\"\n"; | |
| } | |
| while(count-- > 0){ | |
| if((*x >= ' ') && (*x < 127)) { | |
| fputc(*x, stderr); | |
| } else { | |
| fputc('.', stderr); | |
| } | |
| x++; | |
| } | |
| fputs(tag, stderr); | |
| } | |
| #endif | |
| static void send_ready(unsigned local, unsigned remote, atransport *t) | |
| { | |
| D("Calling send_ready \n"); | |
| apacket *p = get_apacket(); | |
| p->msg.command = A_OKAY; | |
| p->msg.arg0 = local; | |
| p->msg.arg1 = remote; | |
| send_packet(p, t); | |
| } | |
| static void send_close(unsigned local, unsigned remote, atransport *t) | |
| { | |
| D("Calling send_close \n"); | |
| apacket *p = get_apacket(); | |
| p->msg.command = A_CLSE; | |
| p->msg.arg0 = local; | |
| p->msg.arg1 = remote; | |
| send_packet(p, t); | |
| } | |
| static size_t fill_connect_data(char *buf, size_t bufsize) | |
| { | |
| #if ADB_HOST | |
| return snprintf(buf, bufsize, "host::") + 1; | |
| #else | |
| static const char *cnxn_props[] = { | |
| "ro.product.name", | |
| "ro.product.model", | |
| "ro.product.device", | |
| }; | |
| static const int num_cnxn_props = ARRAY_SIZE(cnxn_props); | |
| int i; | |
| size_t remaining = bufsize; | |
| size_t len; | |
| len = snprintf(buf, remaining, "%s::", adb_device_banner); | |
| remaining -= len; | |
| buf += len; | |
| for (i = 0; i < num_cnxn_props; i++) { | |
| char value[PROPERTY_VALUE_MAX]; | |
| property_get(cnxn_props[i], value, ""); | |
| len = snprintf(buf, remaining, "%s=%s;", cnxn_props[i], value); | |
| remaining -= len; | |
| buf += len; | |
| } | |
| return bufsize - remaining + 1; | |
| #endif | |
| } | |
| #if !ADB_HOST | |
| static void send_msg_with_header(int fd, const char* msg, size_t msglen) { | |
| char header[5]; | |
| if (msglen > 0xffff) | |
| msglen = 0xffff; | |
| snprintf(header, sizeof(header), "%04x", (unsigned)msglen); | |
| WriteFdExactly(fd, header, 4); | |
| WriteFdExactly(fd, msg, msglen); | |
| } | |
| #endif | |
| #if ADB_HOST | |
| static void send_msg_with_okay(int fd, const char* msg, size_t msglen) { | |
| char header[9]; | |
| if (msglen > 0xffff) | |
| msglen = 0xffff; | |
| snprintf(header, sizeof(header), "OKAY%04x", (unsigned)msglen); | |
| WriteFdExactly(fd, header, 8); | |
| WriteFdExactly(fd, msg, msglen); | |
| } | |
| #endif // ADB_HOST | |
| void send_connect(atransport *t) | |
| { | |
| D("Calling send_connect \n"); | |
| apacket *cp = get_apacket(); | |
| cp->msg.command = A_CNXN; | |
| cp->msg.arg0 = A_VERSION; | |
| cp->msg.arg1 = MAX_PAYLOAD; | |
| cp->msg.data_length = fill_connect_data((char *)cp->data, | |
| sizeof(cp->data)); | |
| send_packet(cp, t); | |
| } | |
| #if ADB_HOST | |
| static const char* connection_state_name(atransport *t) | |
| { | |
| if (t == NULL) { | |
| return "unknown"; | |
| } | |
| switch(t->connection_state) { | |
| case CS_BOOTLOADER: | |
| return "bootloader"; | |
| case CS_DEVICE: | |
| return "device"; | |
| case CS_RECOVERY: | |
| return "recovery"; | |
| case CS_SIDELOAD: | |
| return "sideload"; | |
| case CS_OFFLINE: | |
| return "offline"; | |
| case CS_UNAUTHORIZED: | |
| return "unauthorized"; | |
| default: | |
| return "unknown"; | |
| } | |
| } | |
| #endif // ADB_HOST | |
| // qual_overwrite is used to overwrite a qualifier string. dst is a | |
| // pointer to a char pointer. It is assumed that if *dst is non-NULL, it | |
| // was malloc'ed and needs to freed. *dst will be set to a dup of src. | |
| // TODO: switch to std::string for these atransport fields instead. | |
| static void qual_overwrite(char** dst, const std::string& src) { | |
| free(*dst); | |
| *dst = strdup(src.c_str()); | |
| } | |
| void parse_banner(const char* banner, atransport* t) { | |
| D("parse_banner: %s\n", banner); | |
| // The format is something like: | |
| // "device::ro.product.name=x;ro.product.model=y;ro.product.device=z;". | |
| std::vector<std::string> pieces = android::base::Split(banner, ":"); | |
| if (pieces.size() > 2) { | |
| const std::string& props = pieces[2]; | |
| for (auto& prop : android::base::Split(props, ";")) { | |
| // The list of properties was traditionally ;-terminated rather than ;-separated. | |
| if (prop.empty()) continue; | |
| std::vector<std::string> key_value = android::base::Split(prop, "="); | |
| if (key_value.size() != 2) continue; | |
| const std::string& key = key_value[0]; | |
| const std::string& value = key_value[1]; | |
| if (key == "ro.product.name") { | |
| qual_overwrite(&t->product, value); | |
| } else if (key == "ro.product.model") { | |
| qual_overwrite(&t->model, value); | |
| } else if (key == "ro.product.device") { | |
| qual_overwrite(&t->device, value); | |
| } | |
| } | |
| } | |
| const std::string& type = pieces[0]; | |
| if (type == "bootloader") { | |
| D("setting connection_state to CS_BOOTLOADER\n"); | |
| t->connection_state = CS_BOOTLOADER; | |
| update_transports(); | |
| } else if (type == "device") { | |
| D("setting connection_state to CS_DEVICE\n"); | |
| t->connection_state = CS_DEVICE; | |
| update_transports(); | |
| } else if (type == "recovery") { | |
| D("setting connection_state to CS_RECOVERY\n"); | |
| t->connection_state = CS_RECOVERY; | |
| update_transports(); | |
| } else if (type == "sideload") { | |
| D("setting connection_state to CS_SIDELOAD\n"); | |
| t->connection_state = CS_SIDELOAD; | |
| update_transports(); | |
| } | |
| t->connection_state = CS_HOST; | |
| } | |
| void handle_packet(apacket *p, atransport *t) | |
| { | |
| asocket *s; | |
| D("handle_packet() %c%c%c%c\n", ((char*) (&(p->msg.command)))[0], | |
| ((char*) (&(p->msg.command)))[1], | |
| ((char*) (&(p->msg.command)))[2], | |
| ((char*) (&(p->msg.command)))[3]); | |
| print_packet("recv", p); | |
| switch(p->msg.command){ | |
| case A_SYNC: | |
| if(p->msg.arg0){ | |
| send_packet(p, t); | |
| if(HOST) send_connect(t); | |
| } else { | |
| t->connection_state = CS_OFFLINE; | |
| handle_offline(t); | |
| send_packet(p, t); | |
| } | |
| return; | |
| case A_CNXN: /* CONNECT(version, maxdata, "system-id-string") */ | |
| /* XXX verify version, etc */ | |
| if(t->connection_state != CS_OFFLINE) { | |
| t->connection_state = CS_OFFLINE; | |
| handle_offline(t); | |
| } | |
| parse_banner(reinterpret_cast<const char*>(p->data), t); | |
| if (HOST || !auth_enabled) { | |
| handle_online(t); | |
| if(!HOST) send_connect(t); | |
| } else { | |
| send_auth_request(t); | |
| } | |
| break; | |
| case A_AUTH: | |
| if (p->msg.arg0 == ADB_AUTH_TOKEN) { | |
| t->connection_state = CS_UNAUTHORIZED; | |
| t->key = adb_auth_nextkey(t->key); | |
| if (t->key) { | |
| send_auth_response(p->data, p->msg.data_length, t); | |
| } else { | |
| /* No more private keys to try, send the public key */ | |
| send_auth_publickey(t); | |
| } | |
| } else if (p->msg.arg0 == ADB_AUTH_SIGNATURE) { | |
| if (adb_auth_verify(t->token, p->data, p->msg.data_length)) { | |
| adb_auth_verified(t); | |
| t->failed_auth_attempts = 0; | |
| } else { | |
| if (t->failed_auth_attempts++ > 10) | |
| adb_sleep_ms(1000); | |
| send_auth_request(t); | |
| } | |
| } else if (p->msg.arg0 == ADB_AUTH_RSAPUBLICKEY) { | |
| adb_auth_confirm_key(p->data, p->msg.data_length, t); | |
| } | |
| break; | |
| case A_OPEN: /* OPEN(local-id, 0, "destination") */ | |
| if (t->online && p->msg.arg0 != 0 && p->msg.arg1 == 0) { | |
| char *name = (char*) p->data; | |
| name[p->msg.data_length > 0 ? p->msg.data_length - 1 : 0] = 0; | |
| s = create_local_service_socket(name); | |
| if(s == 0) { | |
| send_close(0, p->msg.arg0, t); | |
| } else { | |
| s->peer = create_remote_socket(p->msg.arg0, t); | |
| s->peer->peer = s; | |
| send_ready(s->id, s->peer->id, t); | |
| s->ready(s); | |
| } | |
| } | |
| break; | |
| case A_OKAY: /* READY(local-id, remote-id, "") */ | |
| if (t->online && p->msg.arg0 != 0 && p->msg.arg1 != 0) { | |
| if((s = find_local_socket(p->msg.arg1, 0))) { | |
| if(s->peer == 0) { | |
| /* On first READY message, create the connection. */ | |
| s->peer = create_remote_socket(p->msg.arg0, t); | |
| s->peer->peer = s; | |
| s->ready(s); | |
| } else if (s->peer->id == p->msg.arg0) { | |
| /* Other READY messages must use the same local-id */ | |
| s->ready(s); | |
| } else { | |
| D("Invalid A_OKAY(%d,%d), expected A_OKAY(%d,%d) on transport %s\n", | |
| p->msg.arg0, p->msg.arg1, s->peer->id, p->msg.arg1, t->serial); | |
| } | |
| } | |
| } | |
| break; | |
| case A_CLSE: /* CLOSE(local-id, remote-id, "") or CLOSE(0, remote-id, "") */ | |
| if (t->online && p->msg.arg1 != 0) { | |
| if((s = find_local_socket(p->msg.arg1, p->msg.arg0))) { | |
| /* According to protocol.txt, p->msg.arg0 might be 0 to indicate | |
| * a failed OPEN only. However, due to a bug in previous ADB | |
| * versions, CLOSE(0, remote-id, "") was also used for normal | |
| * CLOSE() operations. | |
| * | |
| * This is bad because it means a compromised adbd could | |
| * send packets to close connections between the host and | |
| * other devices. To avoid this, only allow this if the local | |
| * socket has a peer on the same transport. | |
| */ | |
| if (p->msg.arg0 == 0 && s->peer && s->peer->transport != t) { | |
| D("Invalid A_CLSE(0, %u) from transport %s, expected transport %s\n", | |
| p->msg.arg1, t->serial, s->peer->transport->serial); | |
| } else { | |
| s->close(s); | |
| } | |
| } | |
| } | |
| break; | |
| case A_WRTE: /* WRITE(local-id, remote-id, <data>) */ | |
| if (t->online && p->msg.arg0 != 0 && p->msg.arg1 != 0) { | |
| if((s = find_local_socket(p->msg.arg1, p->msg.arg0))) { | |
| unsigned rid = p->msg.arg0; | |
| p->len = p->msg.data_length; | |
| if(s->enqueue(s, p) == 0) { | |
| D("Enqueue the socket\n"); | |
| send_ready(s->id, rid, t); | |
| } | |
| return; | |
| } | |
| } | |
| break; | |
| default: | |
| printf("handle_packet: what is %08x?!\n", p->msg.command); | |
| } | |
| put_apacket(p); | |
| } | |
| #if ADB_HOST | |
| int launch_server(int server_port) | |
| { | |
| #if defined(_WIN32) | |
| /* we need to start the server in the background */ | |
| /* we create a PIPE that will be used to wait for the server's "OK" */ | |
| /* message since the pipe handles must be inheritable, we use a */ | |
| /* security attribute */ | |
| HANDLE pipe_read, pipe_write; | |
| HANDLE stdout_handle, stderr_handle; | |
| SECURITY_ATTRIBUTES sa; | |
| STARTUPINFO startup; | |
| PROCESS_INFORMATION pinfo; | |
| char program_path[ MAX_PATH ]; | |
| int ret; | |
| sa.nLength = sizeof(sa); | |
| sa.lpSecurityDescriptor = NULL; | |
| sa.bInheritHandle = TRUE; | |
| /* create pipe, and ensure its read handle isn't inheritable */ | |
| ret = CreatePipe( &pipe_read, &pipe_write, &sa, 0 ); | |
| if (!ret) { | |
| fprintf(stderr, "CreatePipe() failure, error %ld\n", GetLastError() ); | |
| return -1; | |
| } | |
| SetHandleInformation( pipe_read, HANDLE_FLAG_INHERIT, 0 ); | |
| /* Some programs want to launch an adb command and collect its output by | |
| * calling CreateProcess with inheritable stdout/stderr handles, then | |
| * using read() to get its output. When this happens, the stdout/stderr | |
| * handles passed to the adb client process will also be inheritable. | |
| * When starting the adb server here, care must be taken to reset them | |
| * to non-inheritable. | |
| * Otherwise, something bad happens: even if the adb command completes, | |
| * the calling process is stuck while read()-ing from the stdout/stderr | |
| * descriptors, because they're connected to corresponding handles in the | |
| * adb server process (even if the latter never uses/writes to them). | |
| */ | |
| stdout_handle = GetStdHandle( STD_OUTPUT_HANDLE ); | |
| stderr_handle = GetStdHandle( STD_ERROR_HANDLE ); | |
| if (stdout_handle != INVALID_HANDLE_VALUE) { | |
| SetHandleInformation( stdout_handle, HANDLE_FLAG_INHERIT, 0 ); | |
| } | |
| if (stderr_handle != INVALID_HANDLE_VALUE) { | |
| SetHandleInformation( stderr_handle, HANDLE_FLAG_INHERIT, 0 ); | |
| } | |
| ZeroMemory( &startup, sizeof(startup) ); | |
| startup.cb = sizeof(startup); | |
| startup.hStdInput = GetStdHandle( STD_INPUT_HANDLE ); | |
| startup.hStdOutput = pipe_write; | |
| startup.hStdError = GetStdHandle( STD_ERROR_HANDLE ); | |
| startup.dwFlags = STARTF_USESTDHANDLES; | |
| ZeroMemory( &pinfo, sizeof(pinfo) ); | |
| /* get path of current program */ | |
| GetModuleFileName( NULL, program_path, sizeof(program_path) ); | |
| char args[64]; | |
| snprintf(args, sizeof(args), "adb -P %d fork-server server", server_port); | |
| ret = CreateProcess( | |
| program_path, /* program path */ | |
| args, | |
| /* the fork-server argument will set the | |
| debug = 2 in the child */ | |
| NULL, /* process handle is not inheritable */ | |
| NULL, /* thread handle is not inheritable */ | |
| TRUE, /* yes, inherit some handles */ | |
| DETACHED_PROCESS, /* the new process doesn't have a console */ | |
| NULL, /* use parent's environment block */ | |
| NULL, /* use parent's starting directory */ | |
| &startup, /* startup info, i.e. std handles */ | |
| &pinfo ); | |
| CloseHandle( pipe_write ); | |
| if (!ret) { | |
| fprintf(stderr, "CreateProcess failure, error %ld\n", GetLastError() ); | |
| CloseHandle( pipe_read ); | |
| return -1; | |
| } | |
| CloseHandle( pinfo.hProcess ); | |
| CloseHandle( pinfo.hThread ); | |
| /* wait for the "OK\n" message */ | |
| { | |
| char temp[3]; | |
| DWORD count; | |
| ret = ReadFile( pipe_read, temp, 3, &count, NULL ); | |
| CloseHandle( pipe_read ); | |
| if ( !ret ) { | |
| fprintf(stderr, "could not read ok from ADB Server, error = %ld\n", GetLastError() ); | |
| return -1; | |
| } | |
| if (count != 3 || temp[0] != 'O' || temp[1] != 'K' || temp[2] != '\n') { | |
| fprintf(stderr, "ADB server didn't ACK\n" ); | |
| return -1; | |
| } | |
| } | |
| #else /* !defined(_WIN32) */ | |
| char path[PATH_MAX]; | |
| int fd[2]; | |
| // set up a pipe so the child can tell us when it is ready. | |
| // fd[0] will be parent's end, and fd[1] will get mapped to stderr in the child. | |
| if (pipe(fd)) { | |
| fprintf(stderr, "pipe failed in launch_server, errno: %d\n", errno); | |
| return -1; | |
| } | |
| get_my_path(path, PATH_MAX); | |
| pid_t pid = fork(); | |
| if(pid < 0) return -1; | |
| if (pid == 0) { | |
| // child side of the fork | |
| // redirect stderr to the pipe | |
| // we use stderr instead of stdout due to stdout's buffering behavior. | |
| adb_close(fd[0]); | |
| dup2(fd[1], STDERR_FILENO); | |
| adb_close(fd[1]); | |
| char str_port[30]; | |
| snprintf(str_port, sizeof(str_port), "%d", server_port); | |
| // child process | |
| int result = execl(path, "adb", "-P", str_port, "fork-server", "server", NULL); | |
| // this should not return | |
| fprintf(stderr, "OOPS! execl returned %d, errno: %d\n", result, errno); | |
| } else { | |
| // parent side of the fork | |
| char temp[3]; | |
| temp[0] = 'A'; temp[1] = 'B'; temp[2] = 'C'; | |
| // wait for the "OK\n" message | |
| adb_close(fd[1]); | |
| int ret = adb_read(fd[0], temp, 3); | |
| int saved_errno = errno; | |
| adb_close(fd[0]); | |
| if (ret < 0) { | |
| fprintf(stderr, "could not read ok from ADB Server, errno = %d\n", saved_errno); | |
| return -1; | |
| } | |
| if (ret != 3 || temp[0] != 'O' || temp[1] != 'K' || temp[2] != '\n') { | |
| fprintf(stderr, "ADB server didn't ACK\n" ); | |
| return -1; | |
| } | |
| setsid(); | |
| } | |
| #endif /* !defined(_WIN32) */ | |
| return 0; | |
| } | |
| #endif /* ADB_HOST */ | |
| // Try to handle a network forwarding request. | |
| // This returns 1 on success, 0 on failure, and -1 to indicate this is not | |
| // a forwarding-related request. | |
| int handle_forward_request(const char* service, transport_type ttype, char* serial, int reply_fd) | |
| { | |
| if (!strcmp(service, "list-forward")) { | |
| // Create the list of forward redirections. | |
| int buffer_size = format_listeners(NULL, 0); | |
| // Add one byte for the trailing zero. | |
| char* buffer = reinterpret_cast<char*>(malloc(buffer_size + 1)); | |
| if (buffer == nullptr) { | |
| sendfailmsg(reply_fd, "not enough memory"); | |
| return 1; | |
| } | |
| (void) format_listeners(buffer, buffer_size + 1); | |
| #if ADB_HOST | |
| send_msg_with_okay(reply_fd, buffer, buffer_size); | |
| #else | |
| send_msg_with_header(reply_fd, buffer, buffer_size); | |
| #endif | |
| free(buffer); | |
| return 1; | |
| } | |
| if (!strcmp(service, "killforward-all")) { | |
| remove_all_listeners(); | |
| #if ADB_HOST | |
| /* On the host: 1st OKAY is connect, 2nd OKAY is status */ | |
| adb_write(reply_fd, "OKAY", 4); | |
| #endif | |
| adb_write(reply_fd, "OKAY", 4); | |
| return 1; | |
| } | |
| if (!strncmp(service, "forward:",8) || | |
| !strncmp(service, "killforward:",12)) { | |
| char *local, *remote; | |
| atransport *transport; | |
| int createForward = strncmp(service, "kill", 4); | |
| int no_rebind = 0; | |
| local = strchr(service, ':') + 1; | |
| // Handle forward:norebind:<local>... here | |
| if (createForward && !strncmp(local, "norebind:", 9)) { | |
| no_rebind = 1; | |
| local = strchr(local, ':') + 1; | |
| } | |
| remote = strchr(local,';'); | |
| if (createForward) { | |
| // Check forward: parameter format: '<local>;<remote>' | |
| if(remote == 0) { | |
| sendfailmsg(reply_fd, "malformed forward spec"); | |
| return 1; | |
| } | |
| *remote++ = 0; | |
| if((local[0] == 0) || (remote[0] == 0) || (remote[0] == '*')) { | |
| sendfailmsg(reply_fd, "malformed forward spec"); | |
| return 1; | |
| } | |
| } else { | |
| // Check killforward: parameter format: '<local>' | |
| if (local[0] == 0) { | |
| sendfailmsg(reply_fd, "malformed forward spec"); | |
| return 1; | |
| } | |
| } | |
| std::string error_msg; | |
| transport = acquire_one_transport(CS_ANY, ttype, serial, &error_msg); | |
| if (!transport) { | |
| sendfailmsg(reply_fd, error_msg.c_str()); | |
| return 1; | |
| } | |
| install_status_t r; | |
| if (createForward) { | |
| r = install_listener(local, remote, transport, no_rebind); | |
| } else { | |
| r = remove_listener(local, transport); | |
| } | |
| if (r == INSTALL_STATUS_OK) { | |
| #if ADB_HOST | |
| /* On the host: 1st OKAY is connect, 2nd OKAY is status */ | |
| WriteFdExactly(reply_fd, "OKAY", 4); | |
| #endif | |
| WriteFdExactly(reply_fd, "OKAY", 4); | |
| return 1; | |
| } | |
| std::string message; | |
| switch (r) { | |
| case INSTALL_STATUS_OK: message = " "; break; | |
| case INSTALL_STATUS_INTERNAL_ERROR: message = "internal error"; break; | |
| case INSTALL_STATUS_CANNOT_BIND: | |
| message = android::base::StringPrintf("cannot bind to socket: %s", strerror(errno)); | |
| break; | |
| case INSTALL_STATUS_CANNOT_REBIND: | |
| message = android::base::StringPrintf("cannot rebind existing socket: %s", strerror(errno)); | |
| break; | |
| case INSTALL_STATUS_LISTENER_NOT_FOUND: message = "listener not found"; break; | |
| } | |
| sendfailmsg(reply_fd, message.c_str()); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| int handle_host_request(char *service, transport_type ttype, char* serial, int reply_fd, asocket *s) | |
| { | |
| if(!strcmp(service, "kill")) { | |
| fprintf(stderr,"adb server killed by remote request\n"); | |
| fflush(stdout); | |
| adb_write(reply_fd, "OKAY", 4); | |
| usb_cleanup(); | |
| exit(0); | |
| } | |
| #if ADB_HOST | |
| atransport *transport = NULL; | |
| // "transport:" is used for switching transport with a specified serial number | |
| // "transport-usb:" is used for switching transport to the only USB transport | |
| // "transport-local:" is used for switching transport to the only local transport | |
| // "transport-any:" is used for switching transport to the only transport | |
| if (!strncmp(service, "transport", strlen("transport"))) { | |
| transport_type type = kTransportAny; | |
| if (!strncmp(service, "transport-usb", strlen("transport-usb"))) { | |
| type = kTransportUsb; | |
| } else if (!strncmp(service, "transport-local", strlen("transport-local"))) { | |
| type = kTransportLocal; | |
| } else if (!strncmp(service, "transport-any", strlen("transport-any"))) { | |
| type = kTransportAny; | |
| } else if (!strncmp(service, "transport:", strlen("transport:"))) { | |
| service += strlen("transport:"); | |
| serial = service; | |
| } | |
| std::string error_msg = "unknown failure"; | |
| transport = acquire_one_transport(CS_ANY, type, serial, &error_msg); | |
| if (transport) { | |
| s->transport = transport; | |
| adb_write(reply_fd, "OKAY", 4); | |
| } else { | |
| sendfailmsg(reply_fd, error_msg.c_str()); | |
| } | |
| return 1; | |
| } | |
| // return a list of all connected devices | |
| if (!strncmp(service, "devices", 7)) { | |
| char buffer[4096]; | |
| int use_long = !strcmp(service+7, "-l"); | |
| if (use_long || service[7] == 0) { | |
| memset(buffer, 0, sizeof(buffer)); | |
| D("Getting device list \n"); | |
| list_transports(buffer, sizeof(buffer), use_long); | |
| D("Wrote device list \n"); | |
| send_msg_with_okay(reply_fd, buffer, strlen(buffer)); | |
| return 0; | |
| } | |
| } | |
| // remove TCP transport | |
| if (!strncmp(service, "disconnect:", 11)) { | |
| char buffer[4096]; | |
| memset(buffer, 0, sizeof(buffer)); | |
| char* serial = service + 11; | |
| if (serial[0] == 0) { | |
| // disconnect from all TCP devices | |
| unregister_all_tcp_transports(); | |
| } else { | |
| char hostbuf[100]; | |
| // assume port 5555 if no port is specified | |
| if (!strchr(serial, ':')) { | |
| snprintf(hostbuf, sizeof(hostbuf) - 1, "%s:5555", serial); | |
| serial = hostbuf; | |
| } | |
| atransport *t = find_transport(serial); | |
| if (t) { | |
| unregister_transport(t); | |
| } else { | |
| snprintf(buffer, sizeof(buffer), "No such device %s", serial); | |
| } | |
| } | |
| send_msg_with_okay(reply_fd, buffer, strlen(buffer)); | |
| return 0; | |
| } | |
| // returns our value for ADB_SERVER_VERSION | |
| if (!strcmp(service, "version")) { | |
| char version[12]; | |
| snprintf(version, sizeof version, "%04x", ADB_SERVER_VERSION); | |
| send_msg_with_okay(reply_fd, version, strlen(version)); | |
| return 0; | |
| } | |
| if(!strncmp(service,"get-serialno",strlen("get-serialno"))) { | |
| const char *out = "unknown"; | |
| transport = acquire_one_transport(CS_ANY, ttype, serial, NULL); | |
| if (transport && transport->serial) { | |
| out = transport->serial; | |
| } | |
| send_msg_with_okay(reply_fd, out, strlen(out)); | |
| return 0; | |
| } | |
| if(!strncmp(service,"get-devpath",strlen("get-devpath"))) { | |
| const char *out = "unknown"; | |
| transport = acquire_one_transport(CS_ANY, ttype, serial, NULL); | |
| if (transport && transport->devpath) { | |
| out = transport->devpath; | |
| } | |
| send_msg_with_okay(reply_fd, out, strlen(out)); | |
| return 0; | |
| } | |
| // indicates a new emulator instance has started | |
| if (!strncmp(service,"emulator:",9)) { | |
| int port = atoi(service+9); | |
| local_connect(port); | |
| /* we don't even need to send a reply */ | |
| return 0; | |
| } | |
| if(!strncmp(service,"get-state",strlen("get-state"))) { | |
| transport = acquire_one_transport(CS_ANY, ttype, serial, NULL); | |
| const char *state = connection_state_name(transport); | |
| send_msg_with_okay(reply_fd, state, strlen(state)); | |
| return 0; | |
| } | |
| #endif // ADB_HOST | |
| int ret = handle_forward_request(service, ttype, serial, reply_fd); | |
| if (ret >= 0) | |
| return ret - 1; | |
| return -1; | |
| } |