blob: d00d57959460e827c175465681d4fb80bb6a9ae5 [file] [log] [blame] [edit]
/*
* Copyright 2012, Samsung Telecommunications of America
* Copyright (C) 2014 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* Written by William Roberts <w.roberts@sta.samsung.com>
*
*/
#include <errno.h>
#include <string.h>
#include <unistd.h>
#define LOG_TAG "libaudit"
#include <log/log.h>
#include "libaudit.h"
/**
* Waits for an ack from the kernel
* @param fd
* The netlink socket fd
* @param seq
* The current sequence number were acking on
* @return
* This function returns 0 on success, else -errno.
*/
static int get_ack(int fd, int16_t seq)
{
int rc;
struct audit_message rep;
/* Sanity check, this is an internal interface this shouldn't happen */
if (fd < 0) {
return -EINVAL;
}
rc = audit_get_reply(fd, &rep, GET_REPLY_BLOCKING, MSG_PEEK);
if (rc < 0) {
return rc;
}
if (rep.nlh.nlmsg_type == NLMSG_ERROR) {
audit_get_reply(fd, &rep, GET_REPLY_BLOCKING, 0);
rc = ((struct nlmsgerr *)rep.data)->error;
if (rc) {
return -rc;
}
}
if ((int16_t)rep.nlh.nlmsg_seq != seq) {
SLOGW("Expected sequence number between user space and kernel space is out of skew, "
"expected %u got %u", seq, rep.nlh.nlmsg_seq);
}
return 0;
}
/**
*
* @param fd
* The netlink socket fd
* @param type
* The type of netlink message
* @param data
* The data to send
* @param size
* The length of the data in bytes
* @return
* This function returns a positive sequence number on success, else -errno.
*/
static int audit_send(int fd, int type, const void *data, size_t size)
{
int rc;
static int16_t sequence = 0;
struct audit_message req;
struct sockaddr_nl addr;
memset(&req, 0, sizeof(req));
memset(&addr, 0, sizeof(addr));
/* We always send netlink messaged */
addr.nl_family = AF_NETLINK;
/* Set up the netlink headers */
req.nlh.nlmsg_type = type;
req.nlh.nlmsg_len = NLMSG_SPACE(size);
req.nlh.nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK;
/*
* Check for a valid fd, even though sendto would catch this, its easier
* to always blindly increment the sequence number
*/
if (fd < 0) {
return -EBADF;
}
/* Ensure the message is not too big */
if (NLMSG_SPACE(size) > MAX_AUDIT_MESSAGE_LENGTH) {
SLOGE("netlink message is too large");
return -EINVAL;
}
/* Only memcpy in the data if it was specified */
if (size && data) {
memcpy(NLMSG_DATA(&req.nlh), data, size);
}
/*
* Only increment the sequence number on a guarantee
* you will send it to the kernel.
*
* Also, the sequence is defined as a u32 in the kernel
* struct. Using an int here might not work on 32/64 bit splits. A
* signed 64 bit value can overflow a u32..but a u32
* might not fit in the response, so we need to use s32.
* Which is still kind of hackish since int could be 16 bits
* in size. The only safe type to use here is a signed 16
* bit value.
*/
req.nlh.nlmsg_seq = ++sequence;
/* While failing and its due to interrupts */
rc = TEMP_FAILURE_RETRY(sendto(fd, &req, req.nlh.nlmsg_len, 0,
(struct sockaddr*) &addr, sizeof(addr)));
/* Not all the bytes were sent */
if (rc < 0) {
rc = -errno;
SLOGE("Error sending data over the netlink socket: %s", strerror(-errno));
goto out;
} else if ((uint32_t) rc != req.nlh.nlmsg_len) {
rc = -EPROTO;
goto out;
}
/* We sent all the bytes, get the ack */
rc = get_ack(fd, sequence);
/* If the ack failed, return the error, else return the sequence number */
rc = (rc == 0) ? (int) sequence : rc;
out:
/* Don't let sequence roll to negative */
if (sequence < 0) {
SLOGW("Auditd to Kernel sequence number has rolled over");
sequence = 0;
}
return rc;
}
int audit_setup(int fd, uint32_t pid)
{
int rc;
struct audit_message rep;
struct audit_status status;
memset(&status, 0, sizeof(status));
/*
* In order to set the auditd PID we send an audit message over the netlink
* socket with the pid field of the status struct set to our current pid,
* and the the mask set to AUDIT_STATUS_PID
*/
status.pid = pid;
status.mask = AUDIT_STATUS_PID | AUDIT_STATUS_RATE_LIMIT;
status.rate_limit = 20; // audit entries per second
/* Let the kernel know this pid will be registering for audit events */
rc = audit_send(fd, AUDIT_SET, &status, sizeof(status));
if (rc < 0) {
SLOGE("Could net set pid for audit events, error: %s", strerror(-rc));
return rc;
}
/*
* In a request where we need to wait for a response, wait for the message
* and discard it. This message confirms and sync's us with the kernel.
* This daemon is now registered as the audit logger.
*
* TODO
* If the daemon dies and restarts the message didn't come back,
* so I went to non-blocking and it seemed to fix the bug.
* Need to investigate further.
*/
audit_get_reply(fd, &rep, GET_REPLY_NONBLOCKING, 0);
return 0;
}
int audit_open()
{
return socket(PF_NETLINK, SOCK_RAW | SOCK_CLOEXEC, NETLINK_AUDIT);
}
int audit_get_reply(int fd, struct audit_message *rep, reply_t block, int peek)
{
ssize_t len;
int flags;
int rc = 0;
struct sockaddr_nl nladdr;
socklen_t nladdrlen = sizeof(nladdr);
if (fd < 0) {
return -EBADF;
}
/* Set up the flags for recv from */
flags = (block == GET_REPLY_NONBLOCKING) ? MSG_DONTWAIT : 0;
flags |= peek;
/*
* Get the data from the netlink socket but on error we need to be carefull,
* the interface shows that EINTR can never be returned, other errors,
* however, can be returned.
*/
len = TEMP_FAILURE_RETRY(recvfrom(fd, rep, sizeof(*rep), flags,
(struct sockaddr*) &nladdr, &nladdrlen));
/*
* EAGAIN should be re-tried until success or another error manifests.
*/
if (len < 0) {
rc = -errno;
if (block == GET_REPLY_NONBLOCKING && rc == -EAGAIN) {
/* If request is non blocking and errno is EAGAIN, just return 0 */
return 0;
}
SLOGE("Error receiving from netlink socket, error: %s", strerror(-rc));
return rc;
}
if (nladdrlen != sizeof(nladdr)) {
SLOGE("Protocol fault, error: %s", strerror(EPROTO));
return -EPROTO;
}
/* Make sure the netlink message was not spoof'd */
if (nladdr.nl_pid) {
SLOGE("Invalid netlink pid received, expected 0 got: %d", nladdr.nl_pid);
return -EINVAL;
}
/* Check if the reply from the kernel was ok */
if (!NLMSG_OK(&rep->nlh, (size_t)len)) {
rc = (len == sizeof(*rep)) ? -EFBIG : -EBADE;
SLOGE("Bad kernel response %s", strerror(-rc));
}
return rc;
}
void audit_close(int fd)
{
int rc = close(fd);
if (rc < 0) {
SLOGE("Attempting to close invalid fd %d, error: %s", fd, strerror(errno));
}
return;
}