| /* | |
| ** | |
| ** Copyright 2010, The Android Open Source Project | |
| ** | |
| ** Licensed under the Apache License, Version 2.0 (the "License"); | |
| ** you may not use this file except in compliance with the License. | |
| ** You may obtain a copy of the License at | |
| ** | |
| ** http://www.apache.org/licenses/LICENSE-2.0 | |
| ** | |
| ** Unless required by applicable law or agreed to in writing, software | |
| ** distributed under the License is distributed on an "AS IS" BASIS, | |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| ** See the License for the specific language governing permissions and | |
| ** limitations under the License. | |
| */ | |
| #include <errno.h> | |
| #include <fcntl.h> | |
| #include <unistd.h> | |
| #include <sys/stat.h> | |
| #include <sys/mman.h> | |
| #include <private/android_filesystem_config.h> | |
| #include "package.h" | |
| /* | |
| * WARNING WARNING WARNING WARNING | |
| * | |
| * The following code runs as root on production devices, before | |
| * the run-as command has dropped the uid/gid. Hence be very | |
| * conservative and keep in mind the following: | |
| * | |
| * - Performance does not matter here, clarity and safety of the code | |
| * does however. Documentation is a must. | |
| * | |
| * - Avoid calling C library functions with complex implementations | |
| * like malloc() and printf(). You want to depend on simple system | |
| * calls instead, which behaviour is not going to be altered in | |
| * unpredictible ways by environment variables or system properties. | |
| * | |
| * - Do not trust user input and/or the filesystem whenever possible. | |
| * | |
| */ | |
| /* The file containing the list of installed packages on the system */ | |
| #define PACKAGES_LIST_FILE "/data/system/packages.list" | |
| /* Copy 'srclen' string bytes from 'src' into buffer 'dst' of size 'dstlen' | |
| * This function always zero-terminate the destination buffer unless | |
| * 'dstlen' is 0, even in case of overflow. | |
| * Returns a pointer into the src string, leaving off where the copy | |
| * has stopped. The copy will stop when dstlen, srclen or a null | |
| * character on src has been reached. | |
| */ | |
| static const char* | |
| string_copy(char* dst, size_t dstlen, const char* src, size_t srclen) | |
| { | |
| const char* srcend = src + srclen; | |
| const char* dstend = dst + dstlen; | |
| if (dstlen == 0) | |
| return src; | |
| dstend--; /* make room for terminating zero */ | |
| while (dst < dstend && src < srcend && *src != '\0') | |
| *dst++ = *src++; | |
| *dst = '\0'; /* zero-terminate result */ | |
| return src; | |
| } | |
| /* Open 'filename' and map it into our address-space. | |
| * Returns buffer address, or NULL on error | |
| * On exit, *filesize will be set to the file's size, or 0 on error | |
| */ | |
| static void* | |
| map_file(const char* filename, size_t* filesize) | |
| { | |
| int fd, ret, old_errno; | |
| struct stat st; | |
| size_t length = 0; | |
| void* address = NULL; | |
| gid_t oldegid; | |
| *filesize = 0; | |
| /* | |
| * Temporarily switch effective GID to allow us to read | |
| * the packages file | |
| */ | |
| oldegid = getegid(); | |
| if (setegid(AID_PACKAGE_INFO) < 0) { | |
| return NULL; | |
| } | |
| /* open the file for reading */ | |
| fd = TEMP_FAILURE_RETRY(open(filename, O_RDONLY)); | |
| if (fd < 0) { | |
| return NULL; | |
| } | |
| /* restore back to our old egid */ | |
| if (setegid(oldegid) < 0) { | |
| goto EXIT; | |
| } | |
| /* get its size */ | |
| ret = TEMP_FAILURE_RETRY(fstat(fd, &st)); | |
| if (ret < 0) | |
| goto EXIT; | |
| /* Ensure that the file is owned by the system user */ | |
| if ((st.st_uid != AID_SYSTEM) || (st.st_gid != AID_PACKAGE_INFO)) { | |
| goto EXIT; | |
| } | |
| /* Ensure that the file has sane permissions */ | |
| if ((st.st_mode & S_IWOTH) != 0) { | |
| goto EXIT; | |
| } | |
| /* Ensure that the size is not ridiculously large */ | |
| length = (size_t)st.st_size; | |
| if ((off_t)length != st.st_size) { | |
| errno = ENOMEM; | |
| goto EXIT; | |
| } | |
| /* Memory-map the file now */ | |
| do { | |
| address = mmap(NULL, length, PROT_READ, MAP_PRIVATE, fd, 0); | |
| } while (address == MAP_FAILED && errno == EINTR); | |
| if (address == MAP_FAILED) { | |
| address = NULL; | |
| goto EXIT; | |
| } | |
| /* We're good, return size */ | |
| *filesize = length; | |
| EXIT: | |
| /* close the file, preserve old errno for better diagnostics */ | |
| old_errno = errno; | |
| close(fd); | |
| errno = old_errno; | |
| return address; | |
| } | |
| /* unmap the file, but preserve errno */ | |
| static void | |
| unmap_file(void* address, size_t size) | |
| { | |
| int old_errno = errno; | |
| TEMP_FAILURE_RETRY(munmap(address, size)); | |
| errno = old_errno; | |
| } | |
| /* Check that a given directory: | |
| * - exists | |
| * - is owned by a given uid/gid | |
| * - is a real directory, not a symlink | |
| * - isn't readable or writable by others | |
| * | |
| * Return 0 on success, or -1 on error. | |
| * errno is set to EINVAL in case of failed check. | |
| */ | |
| static int | |
| check_directory_ownership(const char* path, uid_t uid) | |
| { | |
| int ret; | |
| struct stat st; | |
| do { | |
| ret = lstat(path, &st); | |
| } while (ret < 0 && errno == EINTR); | |
| if (ret < 0) | |
| return -1; | |
| /* must be a real directory, not a symlink */ | |
| if (!S_ISDIR(st.st_mode)) | |
| goto BAD; | |
| /* must be owned by specific uid/gid */ | |
| if (st.st_uid != uid || st.st_gid != uid) | |
| goto BAD; | |
| /* must not be readable or writable by others */ | |
| if ((st.st_mode & (S_IROTH|S_IWOTH)) != 0) | |
| goto BAD; | |
| /* everything ok */ | |
| return 0; | |
| BAD: | |
| errno = EINVAL; | |
| return -1; | |
| } | |
| /* This function is used to check the data directory path for safety. | |
| * We check that every sub-directory is owned by the 'system' user | |
| * and exists and is not a symlink. We also check that the full directory | |
| * path is properly owned by the user ID. | |
| * | |
| * Return 0 on success, -1 on error. | |
| */ | |
| int | |
| check_data_path(const char* dataPath, uid_t uid) | |
| { | |
| int nn; | |
| /* the path should be absolute */ | |
| if (dataPath[0] != '/') { | |
| errno = EINVAL; | |
| return -1; | |
| } | |
| /* look for all sub-paths, we do that by finding | |
| * directory separators in the input path and | |
| * checking each sub-path independently | |
| */ | |
| for (nn = 1; dataPath[nn] != '\0'; nn++) | |
| { | |
| char subpath[PATH_MAX]; | |
| /* skip non-separator characters */ | |
| if (dataPath[nn] != '/') | |
| continue; | |
| /* handle trailing separator case */ | |
| if (dataPath[nn+1] == '\0') { | |
| break; | |
| } | |
| /* found a separator, check that dataPath is not too long. */ | |
| if (nn >= (int)(sizeof subpath)) { | |
| errno = EINVAL; | |
| return -1; | |
| } | |
| /* reject any '..' subpath */ | |
| if (nn >= 3 && | |
| dataPath[nn-3] == '/' && | |
| dataPath[nn-2] == '.' && | |
| dataPath[nn-1] == '.') { | |
| errno = EINVAL; | |
| return -1; | |
| } | |
| /* copy to 'subpath', then check ownership */ | |
| memcpy(subpath, dataPath, nn); | |
| subpath[nn] = '\0'; | |
| if (check_directory_ownership(subpath, AID_SYSTEM) < 0) | |
| return -1; | |
| } | |
| /* All sub-paths were checked, now verify that the full data | |
| * directory is owned by the application uid | |
| */ | |
| if (check_directory_ownership(dataPath, uid) < 0) | |
| return -1; | |
| /* all clear */ | |
| return 0; | |
| } | |
| /* Return TRUE iff a character is a space or tab */ | |
| static inline int | |
| is_space(char c) | |
| { | |
| return (c == ' ' || c == '\t'); | |
| } | |
| /* Skip any space or tab character from 'p' until 'end' is reached. | |
| * Return new position. | |
| */ | |
| static const char* | |
| skip_spaces(const char* p, const char* end) | |
| { | |
| while (p < end && is_space(*p)) | |
| p++; | |
| return p; | |
| } | |
| /* Skip any non-space and non-tab character from 'p' until 'end'. | |
| * Return new position. | |
| */ | |
| static const char* | |
| skip_non_spaces(const char* p, const char* end) | |
| { | |
| while (p < end && !is_space(*p)) | |
| p++; | |
| return p; | |
| } | |
| /* Find the first occurence of 'ch' between 'p' and 'end' | |
| * Return its position, or 'end' if none is found. | |
| */ | |
| static const char* | |
| find_first(const char* p, const char* end, char ch) | |
| { | |
| while (p < end && *p != ch) | |
| p++; | |
| return p; | |
| } | |
| /* Check that the non-space string starting at 'p' and eventually | |
| * ending at 'end' equals 'name'. Return new position (after name) | |
| * on success, or NULL on failure. | |
| * | |
| * This function fails is 'name' is NULL, empty or contains any space. | |
| */ | |
| static const char* | |
| compare_name(const char* p, const char* end, const char* name) | |
| { | |
| /* 'name' must not be NULL or empty */ | |
| if (name == NULL || name[0] == '\0' || p == end) | |
| return NULL; | |
| /* compare characters to those in 'name', excluding spaces */ | |
| while (*name) { | |
| /* note, we don't check for *p == '\0' since | |
| * it will be caught in the next conditional. | |
| */ | |
| if (p >= end || is_space(*p)) | |
| goto BAD; | |
| if (*p != *name) | |
| goto BAD; | |
| p++; | |
| name++; | |
| } | |
| /* must be followed by end of line or space */ | |
| if (p < end && !is_space(*p)) | |
| goto BAD; | |
| return p; | |
| BAD: | |
| return NULL; | |
| } | |
| /* Parse one or more whitespace characters starting from '*pp' | |
| * until 'end' is reached. Updates '*pp' on exit. | |
| * | |
| * Return 0 on success, -1 on failure. | |
| */ | |
| static int | |
| parse_spaces(const char** pp, const char* end) | |
| { | |
| const char* p = *pp; | |
| if (p >= end || !is_space(*p)) { | |
| errno = EINVAL; | |
| return -1; | |
| } | |
| p = skip_spaces(p, end); | |
| *pp = p; | |
| return 0; | |
| } | |
| /* Parse a positive decimal number starting from '*pp' until 'end' | |
| * is reached. Adjust '*pp' on exit. Return decimal value or -1 | |
| * in case of error. | |
| * | |
| * If the value is larger than INT_MAX, -1 will be returned, | |
| * and errno set to EOVERFLOW. | |
| * | |
| * If '*pp' does not start with a decimal digit, -1 is returned | |
| * and errno set to EINVAL. | |
| */ | |
| static int | |
| parse_positive_decimal(const char** pp, const char* end) | |
| { | |
| const char* p = *pp; | |
| int value = 0; | |
| int overflow = 0; | |
| if (p >= end || *p < '0' || *p > '9') { | |
| errno = EINVAL; | |
| return -1; | |
| } | |
| while (p < end) { | |
| int ch = *p; | |
| unsigned d = (unsigned)(ch - '0'); | |
| int val2; | |
| if (d >= 10U) /* d is unsigned, no lower bound check */ | |
| break; | |
| val2 = value*10 + (int)d; | |
| if (val2 < value) | |
| overflow = 1; | |
| value = val2; | |
| p++; | |
| } | |
| *pp = p; | |
| if (overflow) { | |
| errno = EOVERFLOW; | |
| value = -1; | |
| } | |
| return value; | |
| } | |
| /* Read the system's package database and extract information about | |
| * 'pkgname'. Return 0 in case of success, or -1 in case of error. | |
| * | |
| * If the package is unknown, return -1 and set errno to ENOENT | |
| * If the package database is corrupted, return -1 and set errno to EINVAL | |
| */ | |
| int | |
| get_package_info(const char* pkgName, PackageInfo *info) | |
| { | |
| char* buffer; | |
| size_t buffer_len; | |
| const char* p; | |
| const char* buffer_end; | |
| int result = -1; | |
| info->uid = 0; | |
| info->isDebuggable = 0; | |
| info->dataDir[0] = '\0'; | |
| info->seinfo[0] = '\0'; | |
| buffer = map_file(PACKAGES_LIST_FILE, &buffer_len); | |
| if (buffer == NULL) | |
| return -1; | |
| p = buffer; | |
| buffer_end = buffer + buffer_len; | |
| /* expect the following format on each line of the control file: | |
| * | |
| * <pkgName> <uid> <debugFlag> <dataDir> <seinfo> | |
| * | |
| * where: | |
| * <pkgName> is the package's name | |
| * <uid> is the application-specific user Id (decimal) | |
| * <debugFlag> is 1 if the package is debuggable, or 0 otherwise | |
| * <dataDir> is the path to the package's data directory (e.g. /data/data/com.example.foo) | |
| * <seinfo> is the seinfo label associated with the package | |
| * | |
| * The file is generated in com.android.server.PackageManagerService.Settings.writeLP() | |
| */ | |
| while (p < buffer_end) { | |
| /* find end of current line and start of next one */ | |
| const char* end = find_first(p, buffer_end, '\n'); | |
| const char* next = (end < buffer_end) ? end + 1 : buffer_end; | |
| const char* q; | |
| int uid, debugFlag; | |
| /* first field is the package name */ | |
| p = compare_name(p, end, pkgName); | |
| if (p == NULL) | |
| goto NEXT_LINE; | |
| /* skip spaces */ | |
| if (parse_spaces(&p, end) < 0) | |
| goto BAD_FORMAT; | |
| /* second field is the pid */ | |
| uid = parse_positive_decimal(&p, end); | |
| if (uid < 0) | |
| return -1; | |
| info->uid = (uid_t) uid; | |
| /* skip spaces */ | |
| if (parse_spaces(&p, end) < 0) | |
| goto BAD_FORMAT; | |
| /* third field is debug flag (0 or 1) */ | |
| debugFlag = parse_positive_decimal(&p, end); | |
| switch (debugFlag) { | |
| case 0: | |
| info->isDebuggable = 0; | |
| break; | |
| case 1: | |
| info->isDebuggable = 1; | |
| break; | |
| default: | |
| goto BAD_FORMAT; | |
| } | |
| /* skip spaces */ | |
| if (parse_spaces(&p, end) < 0) | |
| goto BAD_FORMAT; | |
| /* fourth field is data directory path and must not contain | |
| * spaces. | |
| */ | |
| q = skip_non_spaces(p, end); | |
| if (q == p) | |
| goto BAD_FORMAT; | |
| p = string_copy(info->dataDir, sizeof info->dataDir, p, q - p); | |
| /* skip spaces */ | |
| if (parse_spaces(&p, end) < 0) | |
| goto BAD_FORMAT; | |
| /* fifth field is the seinfo string */ | |
| q = skip_non_spaces(p, end); | |
| if (q == p) | |
| goto BAD_FORMAT; | |
| string_copy(info->seinfo, sizeof info->seinfo, p, q - p); | |
| /* Ignore the rest */ | |
| result = 0; | |
| goto EXIT; | |
| NEXT_LINE: | |
| p = next; | |
| } | |
| /* the package is unknown */ | |
| errno = ENOENT; | |
| result = -1; | |
| goto EXIT; | |
| BAD_FORMAT: | |
| errno = EINVAL; | |
| result = -1; | |
| EXIT: | |
| unmap_file(buffer, buffer_len); | |
| return result; | |
| } |