| /* system/debuggerd/debuggerd.c | |
| ** | |
| ** Copyright 2006, The Android Open Source Project | |
| ** | |
| ** Licensed under the Apache License, Version 2.0 (the "License"); | |
| ** you may not use this file except in compliance with the License. | |
| ** You may obtain a copy of the License at | |
| ** | |
| ** http://www.apache.org/licenses/LICENSE-2.0 | |
| ** | |
| ** Unless required by applicable law or agreed to in writing, software | |
| ** distributed under the License is distributed on an "AS IS" BASIS, | |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| ** See the License for the specific language governing permissions and | |
| ** limitations under the License. | |
| */ | |
| #include <stdio.h> | |
| #include <errno.h> | |
| #include <signal.h> | |
| #include <pthread.h> | |
| #include <stdarg.h> | |
| #include <fcntl.h> | |
| #include <sys/types.h> | |
| #include <dirent.h> | |
| #include <sys/ptrace.h> | |
| #include <sys/wait.h> | |
| #include <sys/exec_elf.h> | |
| #include <sys/stat.h> | |
| #include <cutils/sockets.h> | |
| #include <cutils/logd.h> | |
| #include <cutils/logger.h> | |
| #include <cutils/properties.h> | |
| #include <linux/input.h> | |
| #include <private/android_filesystem_config.h> | |
| #include "debuggerd.h" | |
| #include "utility.h" | |
| #define ANDROID_LOG_INFO 4 | |
| void _LOG(int tfd, bool in_tombstone_only, const char *fmt, ...) | |
| __attribute__ ((format(printf, 3, 4))); | |
| /* Log information onto the tombstone */ | |
| void _LOG(int tfd, bool in_tombstone_only, const char *fmt, ...) | |
| { | |
| char buf[512]; | |
| va_list ap; | |
| va_start(ap, fmt); | |
| if (tfd >= 0) { | |
| int len; | |
| vsnprintf(buf, sizeof(buf), fmt, ap); | |
| len = strlen(buf); | |
| if(tfd >= 0) write(tfd, buf, len); | |
| } | |
| if (!in_tombstone_only) | |
| __android_log_vprint(ANDROID_LOG_INFO, "DEBUG", fmt, ap); | |
| va_end(ap); | |
| } | |
| // 6f000000-6f01e000 rwxp 00000000 00:0c 16389419 /system/lib/libcomposer.so | |
| // 012345678901234567890123456789012345678901234567890123456789 | |
| // 0 1 2 3 4 5 | |
| mapinfo *parse_maps_line(char *line) | |
| { | |
| mapinfo *mi; | |
| int len = strlen(line); | |
| if (len < 1) return 0; /* not expected */ | |
| line[--len] = 0; | |
| if (len < 50) { | |
| mi = malloc(sizeof(mapinfo) + 1); | |
| } else { | |
| mi = malloc(sizeof(mapinfo) + (len - 47)); | |
| } | |
| if (mi == 0) return 0; | |
| mi->isExecutable = (line[20] == 'x'); | |
| mi->start = strtoul(line, 0, 16); | |
| mi->end = strtoul(line + 9, 0, 16); | |
| /* To be filled in parse_elf_info if the mapped section starts with | |
| * elf_header | |
| */ | |
| mi->exidx_start = mi->exidx_end = 0; | |
| mi->symbols = 0; | |
| mi->next = 0; | |
| if (len < 50) { | |
| mi->name[0] = '\0'; | |
| } else { | |
| strcpy(mi->name, line + 49); | |
| } | |
| return mi; | |
| } | |
| void dump_build_info(int tfd) | |
| { | |
| char fingerprint[PROPERTY_VALUE_MAX]; | |
| property_get("ro.build.fingerprint", fingerprint, "unknown"); | |
| _LOG(tfd, false, "Build fingerprint: '%s'\n", fingerprint); | |
| } | |
| const char *get_signame(int sig) | |
| { | |
| switch(sig) { | |
| case SIGILL: return "SIGILL"; | |
| case SIGABRT: return "SIGABRT"; | |
| case SIGBUS: return "SIGBUS"; | |
| case SIGFPE: return "SIGFPE"; | |
| case SIGSEGV: return "SIGSEGV"; | |
| case SIGSTKFLT: return "SIGSTKFLT"; | |
| default: return "?"; | |
| } | |
| } | |
| const char *get_sigcode(int signo, int code) | |
| { | |
| switch (signo) { | |
| case SIGILL: | |
| switch (code) { | |
| case ILL_ILLOPC: return "ILL_ILLOPC"; | |
| case ILL_ILLOPN: return "ILL_ILLOPN"; | |
| case ILL_ILLADR: return "ILL_ILLADR"; | |
| case ILL_ILLTRP: return "ILL_ILLTRP"; | |
| case ILL_PRVOPC: return "ILL_PRVOPC"; | |
| case ILL_PRVREG: return "ILL_PRVREG"; | |
| case ILL_COPROC: return "ILL_COPROC"; | |
| case ILL_BADSTK: return "ILL_BADSTK"; | |
| } | |
| break; | |
| case SIGBUS: | |
| switch (code) { | |
| case BUS_ADRALN: return "BUS_ADRALN"; | |
| case BUS_ADRERR: return "BUS_ADRERR"; | |
| case BUS_OBJERR: return "BUS_OBJERR"; | |
| } | |
| break; | |
| case SIGFPE: | |
| switch (code) { | |
| case FPE_INTDIV: return "FPE_INTDIV"; | |
| case FPE_INTOVF: return "FPE_INTOVF"; | |
| case FPE_FLTDIV: return "FPE_FLTDIV"; | |
| case FPE_FLTOVF: return "FPE_FLTOVF"; | |
| case FPE_FLTUND: return "FPE_FLTUND"; | |
| case FPE_FLTRES: return "FPE_FLTRES"; | |
| case FPE_FLTINV: return "FPE_FLTINV"; | |
| case FPE_FLTSUB: return "FPE_FLTSUB"; | |
| } | |
| break; | |
| case SIGSEGV: | |
| switch (code) { | |
| case SEGV_MAPERR: return "SEGV_MAPERR"; | |
| case SEGV_ACCERR: return "SEGV_ACCERR"; | |
| } | |
| break; | |
| } | |
| return "?"; | |
| } | |
| void dump_fault_addr(int tfd, int pid, int sig) | |
| { | |
| siginfo_t si; | |
| memset(&si, 0, sizeof(si)); | |
| if(ptrace(PTRACE_GETSIGINFO, pid, 0, &si)){ | |
| _LOG(tfd, false, "cannot get siginfo: %s\n", strerror(errno)); | |
| } else if (signal_has_address(sig)) { | |
| _LOG(tfd, false, "signal %d (%s), code %d (%s), fault addr %08x\n", | |
| sig, get_signame(sig), | |
| si.si_code, get_sigcode(sig, si.si_code), | |
| (uintptr_t) si.si_addr); | |
| } else { | |
| _LOG(tfd, false, "signal %d (%s), code %d (%s), fault addr --------\n", | |
| sig, get_signame(sig), si.si_code, get_sigcode(sig, si.si_code)); | |
| } | |
| } | |
| void dump_crash_banner(int tfd, unsigned pid, unsigned tid, int sig) | |
| { | |
| char data[1024]; | |
| char *x = 0; | |
| FILE *fp; | |
| sprintf(data, "/proc/%d/cmdline", pid); | |
| fp = fopen(data, "r"); | |
| if(fp) { | |
| x = fgets(data, 1024, fp); | |
| fclose(fp); | |
| } | |
| _LOG(tfd, false, | |
| "*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***\n"); | |
| dump_build_info(tfd); | |
| _LOG(tfd, false, "pid: %d, tid: %d >>> %s <<<\n", | |
| pid, tid, x ? x : "UNKNOWN"); | |
| if(sig) dump_fault_addr(tfd, tid, sig); | |
| } | |
| static void parse_elf_info(mapinfo *milist, pid_t pid) | |
| { | |
| mapinfo *mi; | |
| for (mi = milist; mi != NULL; mi = mi->next) { | |
| if (!mi->isExecutable) | |
| continue; | |
| Elf32_Ehdr ehdr; | |
| memset(&ehdr, 0, sizeof(Elf32_Ehdr)); | |
| /* Read in sizeof(Elf32_Ehdr) worth of data from the beginning of | |
| * mapped section. | |
| */ | |
| get_remote_struct(pid, (void *) (mi->start), &ehdr, | |
| sizeof(Elf32_Ehdr)); | |
| /* Check if it has the matching magic words */ | |
| if (IS_ELF(ehdr)) { | |
| Elf32_Phdr phdr; | |
| Elf32_Phdr *ptr; | |
| int i; | |
| ptr = (Elf32_Phdr *) (mi->start + ehdr.e_phoff); | |
| for (i = 0; i < ehdr.e_phnum; i++) { | |
| /* Parse the program header */ | |
| get_remote_struct(pid, (char *) (ptr+i), &phdr, | |
| sizeof(Elf32_Phdr)); | |
| #ifdef __arm__ | |
| /* Found a EXIDX segment? */ | |
| if (phdr.p_type == PT_ARM_EXIDX) { | |
| mi->exidx_start = mi->start + phdr.p_offset; | |
| mi->exidx_end = mi->exidx_start + phdr.p_filesz; | |
| break; | |
| } | |
| #endif | |
| } | |
| /* Try to load symbols from this file */ | |
| mi->symbols = symbol_table_create(mi->name); | |
| } | |
| } | |
| } | |
| void dump_crash_report(int tfd, unsigned pid, unsigned tid, bool at_fault) | |
| { | |
| char data[1024]; | |
| FILE *fp; | |
| mapinfo *milist = 0; | |
| unsigned int sp_list[STACK_CONTENT_DEPTH]; | |
| int stack_depth; | |
| #ifdef __arm__ | |
| int frame0_pc_sane = 1; | |
| #endif | |
| if (!at_fault) { | |
| _LOG(tfd, true, | |
| "--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---\n"); | |
| _LOG(tfd, true, "pid: %d, tid: %d\n", pid, tid); | |
| } | |
| dump_registers(tfd, tid, at_fault); | |
| /* Clear stack pointer records */ | |
| memset(sp_list, 0, sizeof(sp_list)); | |
| sprintf(data, "/proc/%d/maps", pid); | |
| fp = fopen(data, "r"); | |
| if(fp) { | |
| while(fgets(data, 1024, fp)) { | |
| mapinfo *mi = parse_maps_line(data); | |
| if(mi) { | |
| mi->next = milist; | |
| milist = mi; | |
| } | |
| } | |
| fclose(fp); | |
| } | |
| parse_elf_info(milist, tid); | |
| #if __arm__ | |
| /* If stack unwinder fails, use the default solution to dump the stack | |
| * content. | |
| */ | |
| stack_depth = unwind_backtrace_with_ptrace(tfd, tid, milist, sp_list, | |
| &frame0_pc_sane, at_fault); | |
| /* The stack unwinder should at least unwind two levels of stack. If less | |
| * level is seen we make sure at lease pc and lr are dumped. | |
| */ | |
| if (stack_depth < 2) { | |
| dump_pc_and_lr(tfd, tid, milist, stack_depth, at_fault); | |
| } | |
| dump_stack_and_code(tfd, tid, milist, stack_depth, sp_list, at_fault); | |
| #elif __i386__ | |
| /* If stack unwinder fails, use the default solution to dump the stack | |
| * content. | |
| */ | |
| stack_depth = unwind_backtrace_with_ptrace_x86(tfd, tid, milist,at_fault); | |
| #else | |
| #error "Unsupported architecture" | |
| #endif | |
| while(milist) { | |
| mapinfo *next = milist->next; | |
| symbol_table_free(milist->symbols); | |
| free(milist); | |
| milist = next; | |
| } | |
| } | |
| #define MAX_TOMBSTONES 10 | |
| #define typecheck(x,y) { \ | |
| typeof(x) __dummy1; \ | |
| typeof(y) __dummy2; \ | |
| (void)(&__dummy1 == &__dummy2); } | |
| #define TOMBSTONE_DIR "/data/tombstones" | |
| /* | |
| * find_and_open_tombstone - find an available tombstone slot, if any, of the | |
| * form tombstone_XX where XX is 00 to MAX_TOMBSTONES-1, inclusive. If no | |
| * file is available, we reuse the least-recently-modified file. | |
| */ | |
| static int find_and_open_tombstone(void) | |
| { | |
| unsigned long mtime = ULONG_MAX; | |
| struct stat sb; | |
| char path[128]; | |
| int fd, i, oldest = 0; | |
| /* | |
| * XXX: Our stat.st_mtime isn't time_t. If it changes, as it probably ought | |
| * to, our logic breaks. This check will generate a warning if that happens. | |
| */ | |
| typecheck(mtime, sb.st_mtime); | |
| /* | |
| * In a single wolf-like pass, find an available slot and, in case none | |
| * exist, find and record the least-recently-modified file. | |
| */ | |
| for (i = 0; i < MAX_TOMBSTONES; i++) { | |
| snprintf(path, sizeof(path), TOMBSTONE_DIR"/tombstone_%02d", i); | |
| if (!stat(path, &sb)) { | |
| if (sb.st_mtime < mtime) { | |
| oldest = i; | |
| mtime = sb.st_mtime; | |
| } | |
| continue; | |
| } | |
| if (errno != ENOENT) | |
| continue; | |
| fd = open(path, O_CREAT | O_EXCL | O_WRONLY, 0600); | |
| if (fd < 0) | |
| continue; /* raced ? */ | |
| fchown(fd, AID_SYSTEM, AID_SYSTEM); | |
| return fd; | |
| } | |
| /* we didn't find an available file, so we clobber the oldest one */ | |
| snprintf(path, sizeof(path), TOMBSTONE_DIR"/tombstone_%02d", oldest); | |
| fd = open(path, O_CREAT | O_TRUNC | O_WRONLY, 0600); | |
| fchown(fd, AID_SYSTEM, AID_SYSTEM); | |
| return fd; | |
| } | |
| /* Return true if some thread is not detached cleanly */ | |
| static bool dump_sibling_thread_report(int tfd, unsigned pid, unsigned tid) | |
| { | |
| char task_path[1024]; | |
| sprintf(task_path, "/proc/%d/task", pid); | |
| DIR *d; | |
| struct dirent *de; | |
| int need_cleanup = 0; | |
| d = opendir(task_path); | |
| /* Bail early if cannot open the task directory */ | |
| if (d == NULL) { | |
| XLOG("Cannot open /proc/%d/task\n", pid); | |
| return false; | |
| } | |
| while ((de = readdir(d)) != NULL) { | |
| unsigned new_tid; | |
| /* Ignore "." and ".." */ | |
| if (!strcmp(de->d_name, ".") || !strcmp(de->d_name, "..")) | |
| continue; | |
| new_tid = atoi(de->d_name); | |
| /* The main thread at fault has been handled individually */ | |
| if (new_tid == tid) | |
| continue; | |
| /* Skip this thread if cannot ptrace it */ | |
| if (ptrace(PTRACE_ATTACH, new_tid, 0, 0) < 0) | |
| continue; | |
| dump_crash_report(tfd, pid, new_tid, false); | |
| if (ptrace(PTRACE_DETACH, new_tid, 0, 0) != 0) { | |
| XLOG("detach of tid %d failed: %s\n", new_tid, strerror(errno)); | |
| need_cleanup = 1; | |
| } | |
| } | |
| closedir(d); | |
| return need_cleanup != 0; | |
| } | |
| /* | |
| * Reads the contents of the specified log device, filters out the entries | |
| * that don't match the specified pid, and writes them to the tombstone file. | |
| * | |
| * If "tailOnly" is set, we only print the last few lines. | |
| */ | |
| static void dump_log_file(int tfd, unsigned pid, const char* filename, | |
| bool tailOnly) | |
| { | |
| bool first = true; | |
| /* circular buffer, for "tailOnly" mode */ | |
| const int kShortLogMaxLines = 5; | |
| const int kShortLogLineLen = 256; | |
| char shortLog[kShortLogMaxLines][kShortLogLineLen]; | |
| int shortLogCount = 0; | |
| int shortLogNext = 0; | |
| int logfd = open(filename, O_RDONLY | O_NONBLOCK); | |
| if (logfd < 0) { | |
| XLOG("Unable to open %s: %s\n", filename, strerror(errno)); | |
| return; | |
| } | |
| union { | |
| unsigned char buf[LOGGER_ENTRY_MAX_LEN + 1]; | |
| struct logger_entry entry; | |
| } log_entry; | |
| while (true) { | |
| ssize_t actual = read(logfd, log_entry.buf, LOGGER_ENTRY_MAX_LEN); | |
| if (actual < 0) { | |
| if (errno == EINTR) { | |
| /* interrupted by signal, retry */ | |
| continue; | |
| } else if (errno == EAGAIN) { | |
| /* non-blocking EOF; we're done */ | |
| break; | |
| } else { | |
| _LOG(tfd, true, "Error while reading log: %s\n", | |
| strerror(errno)); | |
| break; | |
| } | |
| } else if (actual == 0) { | |
| _LOG(tfd, true, "Got zero bytes while reading log: %s\n", | |
| strerror(errno)); | |
| break; | |
| } | |
| /* | |
| * NOTE: if you XLOG something here, this will spin forever, | |
| * because you will be writing as fast as you're reading. Any | |
| * high-frequency debug diagnostics should just be written to | |
| * the tombstone file. | |
| */ | |
| struct logger_entry* entry = &log_entry.entry; | |
| if (entry->pid != (int32_t) pid) { | |
| /* wrong pid, ignore */ | |
| continue; | |
| } | |
| if (first) { | |
| _LOG(tfd, true, "--------- %slog %s\n", | |
| tailOnly ? "tail end of " : "", filename); | |
| first = false; | |
| } | |
| /* | |
| * Msg format is: <priority:1><tag:N>\0<message:N>\0 | |
| * | |
| * We want to display it in the same format as "logcat -v threadtime" | |
| * (although in this case the pid is redundant). | |
| * | |
| * TODO: scan for line breaks ('\n') and display each text line | |
| * on a separate line, prefixed with the header, like logcat does. | |
| */ | |
| static const char* kPrioChars = "!.VDIWEFS"; | |
| unsigned char prio = entry->msg[0]; | |
| char* tag = entry->msg + 1; | |
| char* msg = tag + strlen(tag) + 1; | |
| /* consume any trailing newlines */ | |
| char* eatnl = msg + strlen(msg) - 1; | |
| while (eatnl >= msg && *eatnl == '\n') { | |
| *eatnl-- = '\0'; | |
| } | |
| char prioChar = (prio < strlen(kPrioChars) ? kPrioChars[prio] : '?'); | |
| char timeBuf[32]; | |
| time_t sec = (time_t) entry->sec; | |
| struct tm tmBuf; | |
| struct tm* ptm; | |
| ptm = localtime_r(&sec, &tmBuf); | |
| strftime(timeBuf, sizeof(timeBuf), "%m-%d %H:%M:%S", ptm); | |
| if (tailOnly) { | |
| snprintf(shortLog[shortLogNext], kShortLogLineLen, | |
| "%s.%03d %5d %5d %c %-8s: %s", | |
| timeBuf, entry->nsec / 1000000, entry->pid, entry->tid, | |
| prioChar, tag, msg); | |
| shortLogNext = (shortLogNext + 1) % kShortLogMaxLines; | |
| shortLogCount++; | |
| } else { | |
| _LOG(tfd, true, "%s.%03d %5d %5d %c %-8s: %s\n", | |
| timeBuf, entry->nsec / 1000000, entry->pid, entry->tid, | |
| prioChar, tag, msg); | |
| } | |
| } | |
| if (tailOnly) { | |
| int i; | |
| /* | |
| * If we filled the buffer, we want to start at "next", which has | |
| * the oldest entry. If we didn't, we want to start at zero. | |
| */ | |
| if (shortLogCount < kShortLogMaxLines) { | |
| shortLogNext = 0; | |
| } else { | |
| shortLogCount = kShortLogMaxLines; /* cap at window size */ | |
| } | |
| for (i = 0; i < shortLogCount; i++) { | |
| _LOG(tfd, true, "%s\n", shortLog[shortLogNext]); | |
| shortLogNext = (shortLogNext + 1) % kShortLogMaxLines; | |
| } | |
| } | |
| close(logfd); | |
| } | |
| /* | |
| * Dumps the logs generated by the specified pid to the tombstone, from both | |
| * "system" and "main" log devices. Ideally we'd interleave the output. | |
| */ | |
| static void dump_logs(int tfd, unsigned pid, bool tailOnly) | |
| { | |
| dump_log_file(tfd, pid, "/dev/log/system", tailOnly); | |
| dump_log_file(tfd, pid, "/dev/log/main", tailOnly); | |
| } | |
| /* Return true if some thread is not detached cleanly */ | |
| static bool engrave_tombstone(unsigned pid, unsigned tid, int debug_uid, | |
| int signal) | |
| { | |
| int fd; | |
| bool need_cleanup = false; | |
| /* don't copy log messages to tombstone unless this is a dev device */ | |
| char value[PROPERTY_VALUE_MAX]; | |
| property_get("ro.debuggable", value, "0"); | |
| bool wantLogs = (value[0] == '1'); | |
| mkdir(TOMBSTONE_DIR, 0755); | |
| chown(TOMBSTONE_DIR, AID_SYSTEM, AID_SYSTEM); | |
| fd = find_and_open_tombstone(); | |
| if (fd < 0) | |
| return need_cleanup; | |
| dump_crash_banner(fd, pid, tid, signal); | |
| dump_crash_report(fd, pid, tid, true); | |
| if (wantLogs) { | |
| dump_logs(fd, pid, true); | |
| } | |
| /* | |
| * If the user has requested to attach gdb, don't collect the per-thread | |
| * information as it increases the chance to lose track of the process. | |
| */ | |
| if ((signed)pid > debug_uid) { | |
| need_cleanup = dump_sibling_thread_report(fd, pid, tid); | |
| } | |
| if (wantLogs) { | |
| dump_logs(fd, pid, false); | |
| } | |
| close(fd); | |
| return need_cleanup; | |
| } | |
| static int | |
| write_string(const char* file, const char* string) | |
| { | |
| int len; | |
| int fd; | |
| ssize_t amt; | |
| fd = open(file, O_RDWR); | |
| len = strlen(string); | |
| if (fd < 0) | |
| return -errno; | |
| amt = write(fd, string, len); | |
| close(fd); | |
| return amt >= 0 ? 0 : -errno; | |
| } | |
| static | |
| void init_debug_led(void) | |
| { | |
| // trout leds | |
| write_string("/sys/class/leds/red/brightness", "0"); | |
| write_string("/sys/class/leds/green/brightness", "0"); | |
| write_string("/sys/class/leds/blue/brightness", "0"); | |
| write_string("/sys/class/leds/red/device/blink", "0"); | |
| // sardine leds | |
| write_string("/sys/class/leds/left/cadence", "0,0"); | |
| } | |
| static | |
| void enable_debug_led(void) | |
| { | |
| // trout leds | |
| write_string("/sys/class/leds/red/brightness", "255"); | |
| // sardine leds | |
| write_string("/sys/class/leds/left/cadence", "1,0"); | |
| } | |
| static | |
| void disable_debug_led(void) | |
| { | |
| // trout leds | |
| write_string("/sys/class/leds/red/brightness", "0"); | |
| // sardine leds | |
| write_string("/sys/class/leds/left/cadence", "0,0"); | |
| } | |
| extern int init_getevent(); | |
| extern void uninit_getevent(); | |
| extern int get_event(struct input_event* event, int timeout); | |
| static void wait_for_user_action(unsigned tid, struct ucred* cr) | |
| { | |
| (void)tid; | |
| /* First log a helpful message */ | |
| LOG( "********************************************************\n" | |
| "* Process %d has been suspended while crashing. To\n" | |
| "* attach gdbserver for a gdb connection on port 5039:\n" | |
| "*\n" | |
| "* adb shell gdbserver :5039 --attach %d &\n" | |
| "*\n" | |
| "* Press HOME key to let the process continue crashing.\n" | |
| "********************************************************\n", | |
| cr->pid, cr->pid); | |
| /* wait for HOME key (TODO: something useful for devices w/o HOME key) */ | |
| if (init_getevent() == 0) { | |
| int ms = 1200 / 10; | |
| int dit = 1; | |
| int dah = 3*dit; | |
| int _ = -dit; | |
| int ___ = 3*_; | |
| int _______ = 7*_; | |
| const signed char codes[] = { | |
| dit,_,dit,_,dit,___,dah,_,dah,_,dah,___,dit,_,dit,_,dit,_______ | |
| }; | |
| size_t s = 0; | |
| struct input_event e; | |
| int home = 0; | |
| init_debug_led(); | |
| enable_debug_led(); | |
| do { | |
| int timeout = abs((int)(codes[s])) * ms; | |
| int res = get_event(&e, timeout); | |
| if (res == 0) { | |
| if (e.type==EV_KEY && e.code==KEY_HOME && e.value==0) | |
| home = 1; | |
| } else if (res == 1) { | |
| if (++s >= sizeof(codes)/sizeof(*codes)) | |
| s = 0; | |
| if (codes[s] > 0) { | |
| enable_debug_led(); | |
| } else { | |
| disable_debug_led(); | |
| } | |
| } | |
| } while (!home); | |
| uninit_getevent(); | |
| } | |
| /* don't forget to turn debug led off */ | |
| disable_debug_led(); | |
| /* close filedescriptor */ | |
| LOG("debuggerd resuming process %d", cr->pid); | |
| } | |
| static void handle_crashing_process(int fd) | |
| { | |
| char buf[64]; | |
| struct stat s; | |
| unsigned tid; | |
| struct ucred cr; | |
| int n, len, status; | |
| int tid_attach_status = -1; | |
| unsigned retry = 30; | |
| bool need_cleanup = false; | |
| char value[PROPERTY_VALUE_MAX]; | |
| property_get("debug.db.uid", value, "-1"); | |
| int debug_uid = atoi(value); | |
| XLOG("handle_crashing_process(%d)\n", fd); | |
| len = sizeof(cr); | |
| n = getsockopt(fd, SOL_SOCKET, SO_PEERCRED, &cr, &len); | |
| if(n != 0) { | |
| LOG("cannot get credentials\n"); | |
| goto done; | |
| } | |
| XLOG("reading tid\n"); | |
| fcntl(fd, F_SETFL, O_NONBLOCK); | |
| while((n = read(fd, &tid, sizeof(unsigned))) != sizeof(unsigned)) { | |
| if(errno == EINTR) continue; | |
| if(errno == EWOULDBLOCK) { | |
| if(retry-- > 0) { | |
| usleep(100 * 1000); | |
| continue; | |
| } | |
| LOG("timed out reading tid\n"); | |
| goto done; | |
| } | |
| LOG("read failure? %s\n", strerror(errno)); | |
| goto done; | |
| } | |
| snprintf(buf, sizeof buf, "/proc/%d/task/%d", cr.pid, tid); | |
| if(stat(buf, &s)) { | |
| LOG("tid %d does not exist in pid %d. ignoring debug request\n", | |
| tid, cr.pid); | |
| close(fd); | |
| return; | |
| } | |
| XLOG("BOOM: pid=%d uid=%d gid=%d tid=%d\n", cr.pid, cr.uid, cr.gid, tid); | |
| /* Note that at this point, the target thread's signal handler | |
| * is blocked in a read() call. This gives us the time to PTRACE_ATTACH | |
| * to it before it has a chance to really fault. | |
| * | |
| * The PTRACE_ATTACH sends a SIGSTOP to the target process, but it | |
| * won't necessarily have stopped by the time ptrace() returns. (We | |
| * currently assume it does.) We write to the file descriptor to | |
| * ensure that it can run as soon as we call PTRACE_CONT below. | |
| * See details in bionic/libc/linker/debugger.c, in function | |
| * debugger_signal_handler(). | |
| */ | |
| tid_attach_status = ptrace(PTRACE_ATTACH, tid, 0, 0); | |
| int ptrace_error = errno; | |
| if (TEMP_FAILURE_RETRY(write(fd, &tid, 1)) != 1) { | |
| XLOG("failed responding to client: %s\n", | |
| strerror(errno)); | |
| goto done; | |
| } | |
| if(tid_attach_status < 0) { | |
| LOG("ptrace attach failed: %s\n", strerror(ptrace_error)); | |
| goto done; | |
| } | |
| close(fd); | |
| fd = -1; | |
| const int sleep_time_usec = 200000; /* 0.2 seconds */ | |
| const int max_total_sleep_usec = 3000000; /* 3 seconds */ | |
| int loop_limit = max_total_sleep_usec / sleep_time_usec; | |
| for(;;) { | |
| if (loop_limit-- == 0) { | |
| LOG("timed out waiting for pid=%d tid=%d uid=%d to die\n", | |
| cr.pid, tid, cr.uid); | |
| goto done; | |
| } | |
| n = waitpid(tid, &status, __WALL | WNOHANG); | |
| if (n == 0) { | |
| /* not ready yet */ | |
| XLOG("not ready yet\n"); | |
| usleep(sleep_time_usec); | |
| continue; | |
| } | |
| if(n < 0) { | |
| if(errno == EAGAIN) continue; | |
| LOG("waitpid failed: %s\n", strerror(errno)); | |
| goto done; | |
| } | |
| XLOG("waitpid: n=%d status=%08x\n", n, status); | |
| if(WIFSTOPPED(status)){ | |
| n = WSTOPSIG(status); | |
| switch(n) { | |
| case SIGSTOP: | |
| XLOG("stopped -- continuing\n"); | |
| n = ptrace(PTRACE_CONT, tid, 0, 0); | |
| if(n) { | |
| LOG("ptrace failed: %s\n", strerror(errno)); | |
| goto done; | |
| } | |
| continue; | |
| case SIGILL: | |
| case SIGABRT: | |
| case SIGBUS: | |
| case SIGFPE: | |
| case SIGSEGV: | |
| case SIGSTKFLT: { | |
| XLOG("stopped -- fatal signal\n"); | |
| need_cleanup = engrave_tombstone(cr.pid, tid, debug_uid, n); | |
| kill(tid, SIGSTOP); | |
| goto done; | |
| } | |
| default: | |
| XLOG("stopped -- unexpected signal\n"); | |
| goto done; | |
| } | |
| } else { | |
| XLOG("unexpected waitpid response\n"); | |
| goto done; | |
| } | |
| } | |
| done: | |
| XLOG("detaching\n"); | |
| /* stop the process so we can debug */ | |
| kill(cr.pid, SIGSTOP); | |
| /* | |
| * If a thread has been attached by ptrace, make sure it is detached | |
| * successfully otherwise we will get a zombie. | |
| */ | |
| if (tid_attach_status == 0) { | |
| int detach_status; | |
| /* detach so we can attach gdbserver */ | |
| detach_status = ptrace(PTRACE_DETACH, tid, 0, 0); | |
| need_cleanup |= (detach_status != 0); | |
| } | |
| /* | |
| * if debug.db.uid is set, its value indicates if we should wait | |
| * for user action for the crashing process. | |
| * in this case, we log a message and turn the debug LED on | |
| * waiting for a gdb connection (for instance) | |
| */ | |
| if ((signed)cr.uid <= debug_uid) { | |
| wait_for_user_action(tid, &cr); | |
| } | |
| /* | |
| * Resume stopped process (so it can crash in peace). If we didn't | |
| * successfully detach, we're still the parent, and the actual parent | |
| * won't receive a death notification via wait(2). At this point | |
| * there's not much we can do about that. | |
| */ | |
| kill(cr.pid, SIGCONT); | |
| if (need_cleanup) { | |
| LOG("debuggerd committing suicide to free the zombie!\n"); | |
| kill(getpid(), SIGKILL); | |
| } | |
| if(fd != -1) close(fd); | |
| } | |
| int main() | |
| { | |
| int s; | |
| struct sigaction act; | |
| int logsocket = -1; | |
| /* | |
| * debuggerd crashes can't be reported to debuggerd. Reset all of the | |
| * crash handlers. | |
| */ | |
| signal(SIGILL, SIG_DFL); | |
| signal(SIGABRT, SIG_DFL); | |
| signal(SIGBUS, SIG_DFL); | |
| signal(SIGFPE, SIG_DFL); | |
| signal(SIGSEGV, SIG_DFL); | |
| signal(SIGSTKFLT, SIG_DFL); | |
| signal(SIGPIPE, SIG_DFL); | |
| logsocket = socket_local_client("logd", | |
| ANDROID_SOCKET_NAMESPACE_ABSTRACT, SOCK_DGRAM); | |
| if(logsocket < 0) { | |
| logsocket = -1; | |
| } else { | |
| fcntl(logsocket, F_SETFD, FD_CLOEXEC); | |
| } | |
| act.sa_handler = SIG_DFL; | |
| sigemptyset(&act.sa_mask); | |
| sigaddset(&act.sa_mask,SIGCHLD); | |
| act.sa_flags = SA_NOCLDWAIT; | |
| sigaction(SIGCHLD, &act, 0); | |
| s = socket_local_server("android:debuggerd", | |
| ANDROID_SOCKET_NAMESPACE_ABSTRACT, SOCK_STREAM); | |
| if(s < 0) return -1; | |
| fcntl(s, F_SETFD, FD_CLOEXEC); | |
| LOG("debuggerd: " __DATE__ " " __TIME__ "\n"); | |
| for(;;) { | |
| struct sockaddr addr; | |
| socklen_t alen; | |
| int fd; | |
| alen = sizeof(addr); | |
| XLOG("waiting for connection\n"); | |
| fd = accept(s, &addr, &alen); | |
| if(fd < 0) { | |
| XLOG("accept failed: %s\n", strerror(errno)); | |
| continue; | |
| } | |
| fcntl(fd, F_SETFD, FD_CLOEXEC); | |
| handle_crashing_process(fd); | |
| } | |
| return 0; | |
| } |