| /* $NetBSD: main.c,v 1.48 2003/09/14 12:09:29 jmmv Exp $ */ | |
| /*- | |
| * Copyright (c) 1991, 1993 | |
| * The Regents of the University of California. All rights reserved. | |
| * | |
| * This code is derived from software contributed to Berkeley by | |
| * Kenneth Almquist. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * 3. Neither the name of the University nor the names of its contributors | |
| * may be used to endorse or promote products derived from this software | |
| * without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND | |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE | |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | |
| * SUCH DAMAGE. | |
| */ | |
| #include <sys/cdefs.h> | |
| #ifndef lint | |
| __COPYRIGHT("@(#) Copyright (c) 1991, 1993\n\ | |
| The Regents of the University of California. All rights reserved.\n"); | |
| #endif /* not lint */ | |
| #ifndef lint | |
| #if 0 | |
| static char sccsid[] = "@(#)main.c 8.7 (Berkeley) 7/19/95"; | |
| #else | |
| __RCSID("$NetBSD: main.c,v 1.48 2003/09/14 12:09:29 jmmv Exp $"); | |
| #endif | |
| #endif /* not lint */ | |
| #include <errno.h> | |
| #include <stdio.h> | |
| #include <signal.h> | |
| #include <sys/stat.h> | |
| #include <unistd.h> | |
| #include <fcntl.h> | |
| #include "shell.h" | |
| #include "main.h" | |
| #include "options.h" | |
| #include "output.h" | |
| #include "parser.h" | |
| #include "nodes.h" | |
| #include "expand.h" | |
| #include "eval.h" | |
| #include "jobs.h" | |
| #include "input.h" | |
| #include "trap.h" | |
| #include "var.h" | |
| #include "show.h" | |
| #include "memalloc.h" | |
| #include "error.h" | |
| #include "init.h" | |
| #include "mystring.h" | |
| #include "exec.h" | |
| #include "cd.h" | |
| #define PROFILE 0 | |
| int rootpid; | |
| int rootshell; | |
| STATIC union node *curcmd; | |
| STATIC union node *prevcmd; | |
| #if PROFILE | |
| short profile_buf[16384]; | |
| extern int etext(); | |
| #endif | |
| STATIC void read_profile(const char *); | |
| STATIC char *find_dot_file(char *); | |
| int main(int, char **); | |
| /* | |
| * Main routine. We initialize things, parse the arguments, execute | |
| * profiles if we're a login shell, and then call cmdloop to execute | |
| * commands. The setjmp call sets up the location to jump to when an | |
| * exception occurs. When an exception occurs the variable "state" | |
| * is used to figure out how far we had gotten. | |
| */ | |
| int | |
| main(int argc, char **argv) | |
| { | |
| struct jmploc jmploc; | |
| struct stackmark smark; | |
| volatile int state; | |
| char *shinit; | |
| #if PROFILE | |
| monitor(4, etext, profile_buf, sizeof profile_buf, 50); | |
| #endif | |
| state = 0; | |
| if (setjmp(jmploc.loc)) { | |
| /* | |
| * When a shell procedure is executed, we raise the | |
| * exception EXSHELLPROC to clean up before executing | |
| * the shell procedure. | |
| */ | |
| switch (exception) { | |
| case EXSHELLPROC: | |
| rootpid = getpid(); | |
| rootshell = 1; | |
| minusc = NULL; | |
| state = 3; | |
| break; | |
| case EXEXEC: | |
| exitstatus = exerrno; | |
| break; | |
| case EXERROR: | |
| exitstatus = 2; | |
| break; | |
| default: | |
| break; | |
| } | |
| if (exception != EXSHELLPROC) { | |
| if (state == 0 || iflag == 0 || ! rootshell) | |
| exitshell(exitstatus); | |
| } | |
| reset(); | |
| if (exception == EXINT | |
| #if ATTY | |
| && (! attyset() || equal(termval(), "emacs")) | |
| #endif | |
| ) { | |
| out2c('\n'); | |
| flushout(&errout); | |
| } | |
| popstackmark(&smark); | |
| FORCEINTON; /* enable interrupts */ | |
| if (state == 1) | |
| goto state1; | |
| else if (state == 2) | |
| goto state2; | |
| else if (state == 3) | |
| goto state3; | |
| else | |
| goto state4; | |
| } | |
| handler = &jmploc; | |
| #ifdef DEBUG | |
| #if DEBUG == 2 | |
| debug = 1; | |
| #endif | |
| opentrace(); | |
| trputs("Shell args: "); trargs(argv); | |
| #endif | |
| rootpid = getpid(); | |
| rootshell = 1; | |
| init(); | |
| setstackmark(&smark); | |
| procargs(argc, argv); | |
| if (argv[0] && argv[0][0] == '-') { | |
| state = 1; | |
| read_profile("/etc/profile"); | |
| state1: | |
| state = 2; | |
| read_profile(".profile"); | |
| } | |
| state2: | |
| state = 3; | |
| if (getuid() == geteuid() && getgid() == getegid()) { | |
| if ((shinit = lookupvar("ENV")) != NULL && *shinit != '\0') { | |
| state = 3; | |
| read_profile(shinit); | |
| } | |
| } | |
| state3: | |
| state = 4; | |
| if (sflag == 0 || minusc) { | |
| static int sigs[] = { | |
| SIGINT, SIGQUIT, SIGHUP, | |
| #ifdef SIGTSTP | |
| SIGTSTP, | |
| #endif | |
| SIGPIPE | |
| }; | |
| #define SIGSSIZE (sizeof(sigs)/sizeof(sigs[0])) | |
| int i; | |
| for (i = 0; i < SIGSSIZE; i++) | |
| setsignal(sigs[i], 0); | |
| } | |
| if (minusc) | |
| evalstring(minusc, 0); | |
| if (sflag || minusc == NULL) { | |
| state4: /* XXX ??? - why isn't this before the "if" statement */ | |
| cmdloop(1); | |
| } | |
| #if PROFILE | |
| monitor(0); | |
| #endif | |
| exitshell(exitstatus); | |
| /* NOTREACHED */ | |
| } | |
| /* | |
| * Read and execute commands. "Top" is nonzero for the top level command | |
| * loop; it turns on prompting if the shell is interactive. | |
| */ | |
| void | |
| cmdloop(int top) | |
| { | |
| union node *n; | |
| struct stackmark smark; | |
| int inter; | |
| int numeof = 0; | |
| TRACE(("cmdloop(%d) called\n", top)); | |
| setstackmark(&smark); | |
| for (;;) { | |
| if (pendingsigs) | |
| dotrap(); | |
| inter = 0; | |
| if (iflag && top) { | |
| inter = 1; | |
| showjobs(out2, SHOW_CHANGED); | |
| flushout(&errout); | |
| } | |
| n = parsecmd(inter); | |
| /* showtree(n); DEBUG */ | |
| if (n == NEOF) { | |
| if (!top || numeof >= 50) | |
| break; | |
| if (!stoppedjobs()) { | |
| if (!Iflag) | |
| break; | |
| out2str("\nUse \"exit\" to leave shell.\n"); | |
| } | |
| numeof++; | |
| } else if (n != NULL && nflag == 0) { | |
| job_warning = (job_warning == 2) ? 1 : 0; | |
| numeof = 0; | |
| evaltree(n, 0); | |
| } | |
| popstackmark(&smark); | |
| setstackmark(&smark); | |
| if (evalskip == SKIPFILE) { | |
| evalskip = 0; | |
| break; | |
| } | |
| } | |
| popstackmark(&smark); | |
| } | |
| /* | |
| * Read /etc/profile or .profile. Return on error. | |
| */ | |
| STATIC void | |
| read_profile(const char *name) | |
| { | |
| int fd; | |
| int xflag_set = 0; | |
| int vflag_set = 0; | |
| INTOFF; | |
| if ((fd = open(name, O_RDONLY)) >= 0) | |
| setinputfd(fd, 1); | |
| INTON; | |
| if (fd < 0) | |
| return; | |
| /* -q turns off -x and -v just when executing init files */ | |
| if (qflag) { | |
| if (xflag) | |
| xflag = 0, xflag_set = 1; | |
| if (vflag) | |
| vflag = 0, vflag_set = 1; | |
| } | |
| cmdloop(0); | |
| if (qflag) { | |
| if (xflag_set) | |
| xflag = 1; | |
| if (vflag_set) | |
| vflag = 1; | |
| } | |
| popfile(); | |
| } | |
| /* | |
| * Read a file containing shell functions. | |
| */ | |
| void | |
| readcmdfile(char *name) | |
| { | |
| int fd; | |
| INTOFF; | |
| if ((fd = open(name, O_RDONLY)) >= 0) | |
| setinputfd(fd, 1); | |
| else | |
| error("Can't open %s", name); | |
| INTON; | |
| cmdloop(0); | |
| popfile(); | |
| } | |
| /* | |
| * Take commands from a file. To be compatible we should do a path | |
| * search for the file, which is necessary to find sub-commands. | |
| */ | |
| STATIC char * | |
| find_dot_file(char *basename) | |
| { | |
| char *fullname; | |
| const char *path = pathval(); | |
| struct stat statb; | |
| /* don't try this for absolute or relative paths */ | |
| if (strchr(basename, '/')) | |
| return basename; | |
| while ((fullname = padvance(&path, basename)) != NULL) { | |
| if ((stat(fullname, &statb) == 0) && S_ISREG(statb.st_mode)) { | |
| /* | |
| * Don't bother freeing here, since it will | |
| * be freed by the caller. | |
| */ | |
| return fullname; | |
| } | |
| stunalloc(fullname); | |
| } | |
| /* not found in the PATH */ | |
| error("%s: not found", basename); | |
| /* NOTREACHED */ | |
| } | |
| int | |
| dotcmd(int argc, char **argv) | |
| { | |
| exitstatus = 0; | |
| if (argc >= 2) { /* That's what SVR2 does */ | |
| char *fullname; | |
| struct stackmark smark; | |
| setstackmark(&smark); | |
| fullname = find_dot_file(argv[1]); | |
| setinputfile(fullname, 1); | |
| commandname = fullname; | |
| cmdloop(0); | |
| popfile(); | |
| popstackmark(&smark); | |
| } | |
| return exitstatus; | |
| } | |
| int | |
| exitcmd(int argc, char **argv) | |
| { | |
| if (stoppedjobs()) | |
| return 0; | |
| if (argc > 1) | |
| exitstatus = number(argv[1]); | |
| exitshell(exitstatus); | |
| /* NOTREACHED */ | |
| } |