crash_reporter/crash_sender - android-core - Git at Google

 #!/system/bin/sh

 # Copyright (C) 2010 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.

 set -e

 # Default product ID in crash report (used if GOOGLE_CRASH_* is undefined).
 BRILLO_PRODUCT=Brillo

 # Base directory that contains any crash reporter state files.
 CRASH_STATE_DIR="/data/misc/crash_reporter"

 # File containing crash_reporter's anonymized guid.
 GUID_FILE="${CRASH_STATE_DIR}/guid"

 # Crash sender lock in case the sender is already running.
 CRASH_SENDER_LOCK="${CRASH_STATE_DIR}/lock/crash_sender"

 # Path to file that indicates a crash test is currently running.
 CRASH_TEST_IN_PROGRESS_FILE="${CRASH_STATE_DIR}/tmp/crash-test-in-progress"

 # Set this to 1 in the environment to allow uploading crash reports
 # for unofficial versions.
 FORCE_OFFICIAL=${FORCE_OFFICIAL:-0}

 # Path to hardware class description.
 HWCLASS_PATH="/sys/devices/platform/chromeos_acpi/HWID"

 # Path to file that indicates this is a developer image.
 LEAVE_CORE_FILE="${CRASH_STATE_DIR}/.leave_core"

 # Path to list_proxies.
 LIST_PROXIES="list_proxies"

 # Maximum crashes to send per day.
 MAX_CRASH_RATE=${MAX_CRASH_RATE:-32}

 # File whose existence mocks crash sending.  If empty we pretend the
 # crash sending was successful, otherwise unsuccessful.
 MOCK_CRASH_SENDING="${CRASH_STATE_DIR}/tmp/mock-crash-sending"

 # Set this to 1 in the environment to pretend to have booted in developer
 # mode.  This is used by autotests.
 MOCK_DEVELOPER_MODE=${MOCK_DEVELOPER_MODE:-0}

 # Ignore PAUSE_CRASH_SENDING file if set.
 OVERRIDE_PAUSE_SENDING=${OVERRIDE_PAUSE_SENDING:-0}

 # File whose existence causes crash sending to be delayed (for testing).
 # Must be stateful to enable testing kernel crashes.
 PAUSE_CRASH_SENDING="${CRASH_STATE_DIR}/lock/crash_sender_paused"

 # Path to a directory of restricted certificates which includes
 # a certificate for the crash server.
 RESTRICTED_CERTIFICATES_PATH="/system/etc/security/cacerts"
 RESTRICTED_CERTIFICATES_PATH_GOOGLE="/system/etc/security/cacerts_google"

 # File whose existence implies we're running and not to start again.
 RUN_FILE="${CRASH_STATE_DIR}/run/crash_sender.pid"

 # Maximum time to sleep between sends.
 SECONDS_SEND_SPREAD=${SECONDS_SEND_SPREAD:-600}

 # Set this to 1 to allow uploading of device coredumps.
 DEVCOREDUMP_UPLOAD_FLAG_FILE="${CRASH_STATE_DIR}/device_coredump_upload_allowed"

 # The weave configuration file.
 WEAVE_CONF_FILE="/etc/weaved/weaved.conf"

 # The os-release.d folder.
 OSRELEASED_FOLDER="/etc/os-release.d"

 # The syslog tag for all logging we emit.
 TAG="$(basename $0)[$$]"

 # Directory to store timestamp files indicating the uploads in the past 24
 # hours.
 TIMESTAMPS_DIR="${CRASH_STATE_DIR}/crash_sender"

 # Temp directory for this process.
 TMP_DIR=""

 # Crash report log file.
 CRASH_LOG="${CRASH_STATE_DIR}/log/uploads.log"

 lecho() {
   log -t "${TAG}" "$@"
 }

 lwarn() {
   lecho -psyslog.warn "$@"
 }

 # Returns true if mock is enabled.
 is_mock() {
   [ -f "${MOCK_CRASH_SENDING}" ] && return 0
   return 1
 }

 is_mock_successful() {
   local mock_in=$(cat "${MOCK_CRASH_SENDING}")
   [ "${mock_in}" = "" ] && return 0  # empty file means success
   return 1
 }

 cleanup() {
   if [ -n "${TMP_DIR}" ]; then
     rm -rf "${TMP_DIR}"
   fi
   rm -f "${RUN_FILE}"
   if [ -n "${CRASH_SENDER_LOCK}" ]; then
     rm -rf "${CRASH_SENDER_LOCK}"
   fi
   crash_done
 }

 crash_done() {
   if is_mock; then
     # For testing purposes, emit a message to log so that we
     # know when the test has received all the messages from this run.
     lecho "crash_sender done."
   fi
 }

 is_official_image() {
   [ ${FORCE_OFFICIAL} -ne 0 ] && return 0
   if [ "$(getprop ro.secure)" = "1" ]; then
     return 0
   else
     return 1
   fi
 }

 # Returns 0 if the a crash test is currently running.  NOTE: Mirrors
 # crash_collector.cc:CrashCollector::IsCrashTestInProgress().
 is_crash_test_in_progress() {
   [ -f "${CRASH_TEST_IN_PROGRESS_FILE}" ] && return 0
   return 1
 }

 # Returns 0 if we should consider ourselves to be running on a developer
 # image.  NOTE: Mirrors crash_collector.cc:CrashCollector::IsDeveloperImage().
 is_developer_image() {
   # If we're testing crash reporter itself, we don't want to special-case
   # for developer images.
   is_crash_test_in_progress && return 1
   [ -f "${LEAVE_CORE_FILE}" ] && return 0
   return 1
 }

 # Returns 0 if we should consider ourselves to be running on a test image.
 is_test_image() {
   # If we're testing crash reporter itself, we don't want to special-case
   # for test images.
   is_crash_test_in_progress && return 1
   case $(get_channel) in
   test*) return 0;;
   esac
   return 1
 }

 # Returns 0 if the machine booted up in developer mode.
 is_developer_mode() {
   [ ${MOCK_DEVELOPER_MODE} -ne 0 ] && return 0
   # If we're testing crash reporter itself, we don't want to special-case
   # for developer mode.
   is_crash_test_in_progress && return 1
   if [ "$(getprop ro.debuggable)" = "1" ]; then
     return 0
   else
     return 1
   fi
 }

 # Returns the path of the certificates directory to be used when sending
 # reports to the crash server.
 # If crash_reporter.full_certs=1, return the full certificates path.
 # Otherwise return the Google-specific certificates path.
 get_certificates_path() {
   if [ "$(getprop crash_reporter.full_certs)" = "1" ]; then
     echo "${RESTRICTED_CERTIFICATES_PATH}"
   else
     echo "${RESTRICTED_CERTIFICATES_PATH_GOOGLE}"
   fi
 }

 # Return 0 if the uploading of device coredumps is allowed.
 is_device_coredump_upload_allowed() {
   [ -f "${DEVCOREDUMP_UPLOAD_FLAG_FILE}" ] && return 0
   return 1
 }

 # Generate a uniform random number in 0..max-1.
 # POSIX arithmetic expansion requires support of at least signed long integers.
 # On 32-bit systems, that may mean 32-bit signed integers, in which case the
 # 32-bit random number read from /dev/urandom may be interpreted as negative
 # when used inside an arithmetic expansion (since the high bit might be set).
 # mksh at least is known to behave this way.
 # For this case, simply take the absolute value, which will still give a
 # roughly uniform random distribution for the modulo (as we are merely ignoring
 # the high/sign bit).
 # See corresponding Arithmetic Expansion and Arithmetic Expression sections:
 # POSIX: http://pubs.opengroup.org/onlinepubs/009695399/utilities/xcu_chap02.html#tag_02_06_04
 # mksh: http://linux.die.net/man/1/mksh
 generate_uniform_random() {
   local max=$1
   local random="$(od -An -N4 -tu /dev/urandom)"
   echo $(((random < 0 ? -random : random) % max))
 }

 # Check if sending a crash now does not exceed the maximum 24hr rate and
 # commit to doing so, if not.
 check_rate() {
   mkdir -p ${TIMESTAMPS_DIR}
   # Only consider minidumps written in the past 24 hours by removing all older.
   find "${TIMESTAMPS_DIR}" -mindepth 1 -mtime +1 \
       -exec rm -- '{}' ';'
   local sends_in_24hrs=$(echo "${TIMESTAMPS_DIR}"/* | wc -w)
   lecho "Current send rate: ${sends_in_24hrs}sends/24hrs"
   if [ ${sends_in_24hrs} -ge ${MAX_CRASH_RATE} ]; then
     lecho "Cannot send more crashes:"
     lecho "  current ${sends_in_24hrs}send/24hrs >= " \
           "max ${MAX_CRASH_RATE}send/24hrs"
     return 1
   fi
   mktemp "${TIMESTAMPS_DIR}"/XXXXXX > /dev/null
   return 0
 }

 # Gets the base part of a crash report file, such as name.01234.5678.9012 from
 # name.01234.5678.9012.meta or name.01234.5678.9012.log.tar.xz.  We make sure
 # "name" is sanitized in CrashCollector::Sanitize to not include any periods.
 get_base() {
   echo "$1" | cut -d. -f-4
 }

 get_extension() {
   local extension="${1##*.}"
   local filename="${1%.*}"
   # For gzipped file, we ignore .gz and get the real extension
   if [ "${extension}" = "gz" ]; then
     echo "${filename##*.}"
   else
     echo "${extension}"
   fi
 }

 # Return which kind of report the given metadata file relates to
 get_kind() {
   local payload="$(get_key_value "$1" "payload")"
   if [ ! -r "${payload}" ]; then
     lecho "Missing payload: ${payload}"
     echo "undefined"
     return
   fi
   local kind="$(get_extension "${payload}")"
   if [ "${kind}" = "dmp" ]; then
     echo "minidump"
     return
   fi
   echo "${kind}"
 }

 get_key_value() {
   local file="$1" key="$2" value

   if [ -f "${file}/${key}" ]; then
     # Get the value from a folder where each key is its own file.  The key
     # file's entire contents is the value.
     value=$(cat "${file}/${key}")
   elif [ -f "${file}" ]; then
     # Get the value from a file that has multiple key=value combinations.
     # Return the first entry.  There shouldn't be more than one anyways.
     # Substr at length($1) + 2 skips past the key and following = sign (awk
     # uses 1-based indexes), but preserves embedded = characters.
     value=$(sed -n "/^${key}[[:space:]]*=/{s:^[^=]*=::p;q}" "${file}")
   fi

   echo "${value:-undefined}"
 }

 get_keys() {
   local file="$1" regex="$2"

   cut -d '=' -f1 "${file}" | grep --color=never "${regex}"
 }

 # Return the channel name (sans "-channel" suffix).
 get_channel() {
   getprop ro.product.channel | sed 's:-channel$::'
 }

 # Return the hardware class or "undefined".
 get_hardware_class() {
   if [ -r "${HWCLASS_PATH}" ]; then
     cat "${HWCLASS_PATH}"
   else
     echo "undefined"
   fi
 }

 # Return the log string filtered with only JSON-safe white-listed characters.
 filter_log_string() {
   echo "$1" | tr -cd '[:alnum:]_.\-:;'
 }

 send_crash() {
   local meta_path="$1"
   local report_payload="$(get_key_value "${meta_path}" "payload")"
   local kind="$(get_kind "${meta_path}")"
   local exec_name="$(get_key_value "${meta_path}" "exec_name")"
   local url="$(get_key_value "${OSRELEASED_FOLDER}" "crash_server")"
   local bdk_version="$(get_key_value "${meta_path}" "bdk_version")"
   local hwclass="$(get_hardware_class)"
   local write_payload_size="$(get_key_value "${meta_path}" "payload_size")"
   local log="$(get_key_value "${meta_path}" "log")"
   local sig="$(get_key_value "${meta_path}" "sig")"
   local send_payload_size="$(stat -c "%s" "${report_payload}" 2>/dev/null)"
   local product="$(get_key_value "${meta_path}" "product_id")"
   local version="$(get_key_value "${meta_path}" "product_version")"
   local upload_prefix="$(get_key_value "${meta_path}" "upload_prefix")"
   local guid
   local model_manifest_id="$(get_key_value "${WEAVE_CONF_FILE}" "model_id")"

   # If crash_reporter.server is not set return with an error.
   if [ -z "${url}" ]; then
     lecho "Configuration error: crash_reporter.server not set."
     return 1
   fi

   set -- \
     -F "write_payload_size=${write_payload_size}" \
     -F "send_payload_size=${send_payload_size}"
   if [ "${sig}" != "undefined" ]; then
     set -- "$@" \
       -F "sig=${sig}" \
       -F "sig2=${sig}"
   fi
   if [ -r "${report_payload}" ]; then
     set -- "$@" \
       -F "upload_file_${kind}=@${report_payload}"
   fi
   if [ "${log}" != "undefined" -a -r "${log}" ]; then
     set -- "$@" \
       -F "log=@${log}"
   fi

   if [ "${upload_prefix}" = "undefined" ]; then
     upload_prefix=""
   fi

   # Grab any variable that begins with upload_.
   local v
   for k in $(get_keys "${meta_path}" "^upload_"); do
     v="$(get_key_value "${meta_path}" "${k}")"
     case ${k} in
       # Product & version are handled separately.
       upload_var_prod) ;;
       upload_var_ver) ;;
       upload_var_*)
         set -- "$@" -F "${upload_prefix}${k#upload_var_}=${v}"
         ;;
       upload_file_*)
         if [ -r "${v}" ]; then
           set -- "$@" -F "${upload_prefix}${k#upload_file_}=@${v}"
         fi
         ;;
     esac
   done

   # If ID or VERSION_ID is undefined, we use the default product name
   # and bdk_version from /etc/os-release.d.
   if [ "${product}" = "undefined" ]; then
     product="${BRILLO_PRODUCT}"
   fi
   if [ "${version}" = "undefined" ]; then
     version="${bdk_version}"
   fi

   local image_type
   if is_test_image; then
     image_type="test"
   elif is_developer_image; then
     image_type="dev"
   elif [ ${FORCE_OFFICIAL} -ne 0 ]; then
     image_type="force-official"
   elif is_mock && ! is_mock_successful; then
     image_type="mock-fail"
   fi

   local boot_mode
   if is_developer_mode; then
     boot_mode="dev"
   fi

   # Need to strip dashes ourselves as Chrome preserves it in the file
   # nowadays.  This is also what the Chrome breakpad client does.
   guid=$(tr -d '-' < "${GUID_FILE}")

   local error_type="$(get_key_value "${meta_path}" "error_type")"
   [ "${error_type}" = "undefined" ] && error_type=

   lecho "Sending crash:"
   if [ "${product}" != "${BRILLO_PRODUCT}" ]; then
     lecho "  Sending crash report on behalf of ${product}"
   fi
   lecho "  Metadata: ${meta_path} (${kind})"
   lecho "  Payload: ${report_payload}"
   lecho "  Version: ${version}"
   lecho "  Bdk Version: ${bdk_version}"
   [ -n "${image_type}" ] && lecho "  Image type: ${image_type}"
   [ -n "${boot_mode}" ] && lecho "  Boot mode: ${boot_mode}"
   if is_mock; then
     lecho "  Product: ${product}"
     lecho "  URL: ${url}"
     lecho "  HWClass: ${hwclass}"
     lecho "  write_payload_size: ${write_payload_size}"
     lecho "  send_payload_size: ${send_payload_size}"
     if [ "${log}" != "undefined" ]; then
       lecho "  log: @${log}"
     fi
     if [ "${sig}" != "undefined" ]; then
       lecho "  sig: ${sig}"
     fi
   fi
   lecho "  Exec name: ${exec_name}"
   [ -n "${error_type}" ] && lecho "  Error type: ${error_type}"
   if is_mock; then
     if ! is_mock_successful; then
       lecho "Mocking unsuccessful send"
       return 1
     fi
     lecho "Mocking successful send"
     return 0
   fi

   # Read in the first proxy, if any, for a given URL.  NOTE: The
   # double-quotes are necessary due to a bug in dash with the "local"
   # builtin command and values that have spaces in them (see
   # "https://bugs.launchpad.net/ubuntu/+source/dash/+bug/139097").
   if [ -f "${LIST_PROXIES}" ]; then
     local proxy ret
     proxy=$("${LIST_PROXIES}" --quiet "${url}")
     ret=$?
     if [ ${ret} -ne 0 ]; then
       proxy=''
       lwarn "Listing proxies failed with exit code ${ret}"
     else
       proxy=$(echo "${proxy}" | head -1)
     fi
   fi
   # if a direct connection should be used, unset the proxy variable.
   [ "${proxy}" = "direct://" ] && proxy=
   local report_id="${TMP_DIR}/report_id"
   local curl_stderr="${TMP_DIR}/curl_stderr"

   set +e
   curl "${url}" -f -v ${proxy:+--proxy "$proxy"} \
     --capath "$(get_certificates_path)" --ciphers HIGH \
     -F "prod=${product}" \
     -F "ver=${version}" \
     -F "bdk_version=${bdk_version}" \
     -F "hwclass=${hwclass}" \
     -F "exec_name=${exec_name}" \
     -F "model_manifest_id=${model_manifest_id}" \
     ${image_type:+-F "image_type=${image_type}"} \
     ${boot_mode:+-F "boot_mode=${boot_mode}"} \
     ${error_type:+-F "error_type=${error_type}"} \
     -F "guid=${guid}" \
     -o "${report_id}" \
     "$@" \
     2>"${curl_stderr}"
   curl_result=$?
   set -e

   if [ ${curl_result} -eq 0 ]; then
     local id="$(cat "${report_id}")"
     local timestamp="$(date +%s)"
     local filter_prod="$(filter_log_string "${product}")"
     local filter_exec="$(filter_log_string "${exec_name}")"
     if [ "${filter_prod}" != "${product}" ]; then
       lwarn "Product name filtered to: ${filter_prod}."
     fi
     if [ "${filter_exec}" != "${exec_name}" ]; then
       lwarn "Exec name filtered to: ${filter_exec}."
     fi
     printf "{'time':%s,'id':'%s','product':'%s','exec_name':'%s'}\n" \
       "${timestamp}" "${id}" "${filter_prod}" "${filter_exec}" >> "${CRASH_LOG}"
     lecho "Crash report receipt ID ${id}"
   else
     lecho "Crash sending failed with exit code ${curl_result}: " \
       "$(cat "${curl_stderr}")"
   fi

   rm -f "${report_id}"

   return ${curl_result}
 }

 # *.meta files always end with done=1 so we can tell if they are complete.
 is_complete_metadata() {
   grep -q "done=1" "$1"
 }

 # Remove the given report path.
 remove_report() {
   local base="${1%.*}"
   rm -f -- "${base}".*
 }

 # Send all crashes from the given directory.  This applies even when we're on a
 # 3G connection (see crosbug.com/3304 for discussion).
 send_crashes() {
   local dir="$1"
   lecho "Sending crashes for ${dir}"

   if [ ! -d "${dir}" ]; then
     return
   fi

   # Consider any old files which still have no corresponding meta file
   # as orphaned, and remove them.
   for old_file in $(find "${dir}" -mindepth 1 \
                     -mtime +1 -type f); do
     if [ ! -e "$(get_base "${old_file}").meta" ]; then
       lecho "Removing old orphaned file: ${old_file}."
       rm -f -- "${old_file}"
     fi
   done

   # Look through all metadata (*.meta) files, oldest first.  That way, the rate
   # limit does not stall old crashes if there's a high amount of new crashes
   # coming in.
   # For each crash report, first evaluate conditions that might lead to its
   # removal to honor user choice and to free disk space as soon as possible,
   # then decide whether it should be sent right now or kept for later sending.
   for meta_path in $(ls -1tr "${dir}"/*.meta 2>/dev/null); do
     lecho "Considering metadata ${meta_path}."

     local kind=$(get_kind "${meta_path}")
     if [ "${kind}" != "minidump" ] && \
        [ "${kind}" != "kcrash" ] && \
        [ "${kind}" != "log" ] &&
        [ "${kind}" != "devcore" ]; then
       lecho "Unknown report kind ${kind}.  Removing report."
       remove_report "${meta_path}"
       continue
     fi

     if ! is_complete_metadata "${meta_path}"; then
       # This report is incomplete, so if it's old, just remove it.
       local old_meta=$(find "${dir}" -mindepth 1 -name \
         $(basename "${meta_path}") -mtime +1 -type f)
       if [ -n "${old_meta}" ]; then
         lecho "Removing old incomplete metadata."
         remove_report "${meta_path}"
       else
         lecho "Ignoring recent incomplete metadata."
       fi
       continue
     fi

     # Ignore device coredump if device coredump uploading is not allowed.
     if [ "${kind}" = "devcore" ] && ! is_device_coredump_upload_allowed; then
       lecho "Ignoring device coredump. Device coredump upload not allowed."
       continue
     fi

     if ! is_mock && ! is_official_image; then
       lecho "Not an official OS version.  Removing crash."
       remove_report "${meta_path}"
       continue
     fi

     # Remove existing crashes in case user consent has not (yet) been given or
     # has been revoked.  This must come after the guest mode check because
     # metrics_client always returns "not consented" in guest mode.
     if ! metrics_client -c; then
       lecho "Crash reporting is disabled.  Removing crash."
       remove_report "${meta_path}"
       continue
     fi

     # Skip report if the upload rate is exceeded.  (Don't exit right now because
     # subsequent reports may be candidates for deletion.)
     if ! check_rate; then
       lecho "Sending ${meta_path} would exceed rate.  Leaving for later."
       continue
     fi

     # The .meta file should be written *after* all to-be-uploaded files that it
     # references.  Nevertheless, as a safeguard, a hold-off time of thirty
     # seconds after writing the .meta file is ensured.  Also, sending of crash
     # reports is spread out randomly by up to SECONDS_SEND_SPREAD.  Thus, for
     # the sleep call the greater of the two delays is used.
     local now=$(date +%s)
     local holdoff_time=$(($(stat -c "%Y" "${meta_path}") + 30 - ${now}))
     local spread_time=$(generate_uniform_random "${SECONDS_SEND_SPREAD}")
     local sleep_time
     if [ ${spread_time} -gt ${holdoff_time} ]; then
       sleep_time="${spread_time}"
     else
       sleep_time="${holdoff_time}"
     fi
     lecho "Scheduled to send in ${sleep_time}s."
     if ! is_mock; then
       if ! sleep "${sleep_time}"; then
           lecho "Sleep failed"
           return 1
       fi
     fi

     # Try to upload.
     if ! send_crash "${meta_path}"; then
       lecho "Problem sending ${meta_path}, not removing."
       continue
     fi

     # Send was successful, now remove.
     lecho "Successfully sent crash ${meta_path} and removing."
     remove_report "${meta_path}"
   done
 }

 usage() {
   cat <<EOF
 Usage: crash_sender [options]

 Options:
  -e <var>=<val>     Set env |var| to |val| (only some vars)
 EOF
   exit ${1:-1}
 }

 parseargs() {
   # Parse the command line arguments.
   while [ $# -gt 0 ]; do
     case $1 in
     -e)
       shift
       case $1 in
       FORCE_OFFICIAL=*|\
       MAX_CRASH_RATE=*|\
       MOCK_DEVELOPER_MODE=*|\
       OVERRIDE_PAUSE_SENDING=*|\
       SECONDS_SEND_SPREAD=*)
         export "$1"
         ;;
       *)
         lecho "Unknown var passed to -e: $1"
         exit 1
         ;;
       esac
       ;;
     -h)
       usage 0
       ;;
     *)
       lecho "Unknown options: $*"
       exit 1
       ;;
     esac
     shift
   done
 }

 main() {
   parseargs "$@"

   if [ -e "${PAUSE_CRASH_SENDING}" ] && \
      [ ${OVERRIDE_PAUSE_SENDING} -eq 0 ]; then
     lecho "Exiting early due to ${PAUSE_CRASH_SENDING}."
     exit 1
   fi

   if is_test_image; then
     lecho "Exiting early due to test image."
     exit 1
   fi

   # We don't perform checks on this because we have a master lock with the
   # CRASH_SENDER_LOCK file.  This pid file is for the system to keep track
   # (like with autotests) that we're still running.
   echo $$ > "${RUN_FILE}"

   for dependency in "$(get_certificates_path)"; do
     if [ ! -x "${dependency}" ]; then
       lecho "Fatal: Crash sending disabled: ${dependency} not found."
       exit 1
     fi
   done

   TMP_DIR="$(mktemp -d "${CRASH_STATE_DIR}/tmp/crash_sender.XXXXXX")"

   # Send system-wide crashes
   send_crashes "${CRASH_STATE_DIR}/crash"
 }

 trap cleanup EXIT INT TERM

 #TODO(http://b/23937249): Change the locking logic back to using flock.
 if ! mkdir "${CRASH_SENDER_LOCK}" 2>/dev/null; then
   lecho "Already running; quitting."
   crash_done
   exit 1
 fi
 main "$@"
	#!/system/bin/sh

	# Copyright (C) 2010 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	set -e

	# Default product ID in crash report (used if GOOGLE_CRASH_* is undefined).
	BRILLO_PRODUCT=Brillo

	# Base directory that contains any crash reporter state files.
	CRASH_STATE_DIR="/data/misc/crash_reporter"

	# File containing crash_reporter's anonymized guid.
	GUID_FILE="${CRASH_STATE_DIR}/guid"

	# Crash sender lock in case the sender is already running.
	CRASH_SENDER_LOCK="${CRASH_STATE_DIR}/lock/crash_sender"

	# Path to file that indicates a crash test is currently running.
	CRASH_TEST_IN_PROGRESS_FILE="${CRASH_STATE_DIR}/tmp/crash-test-in-progress"

	# Set this to 1 in the environment to allow uploading crash reports
	# for unofficial versions.
	FORCE_OFFICIAL=${FORCE_OFFICIAL:-0}

	# Path to hardware class description.
	HWCLASS_PATH="/sys/devices/platform/chromeos_acpi/HWID"

	# Path to file that indicates this is a developer image.
	LEAVE_CORE_FILE="${CRASH_STATE_DIR}/.leave_core"

	# Path to list_proxies.
	LIST_PROXIES="list_proxies"

	# Maximum crashes to send per day.
	MAX_CRASH_RATE=${MAX_CRASH_RATE:-32}

	# File whose existence mocks crash sending. If empty we pretend the
	# crash sending was successful, otherwise unsuccessful.
	MOCK_CRASH_SENDING="${CRASH_STATE_DIR}/tmp/mock-crash-sending"

	# Set this to 1 in the environment to pretend to have booted in developer
	# mode. This is used by autotests.
	MOCK_DEVELOPER_MODE=${MOCK_DEVELOPER_MODE:-0}

	# Ignore PAUSE_CRASH_SENDING file if set.
	OVERRIDE_PAUSE_SENDING=${OVERRIDE_PAUSE_SENDING:-0}

	# File whose existence causes crash sending to be delayed (for testing).
	# Must be stateful to enable testing kernel crashes.
	PAUSE_CRASH_SENDING="${CRASH_STATE_DIR}/lock/crash_sender_paused"

	# Path to a directory of restricted certificates which includes
	# a certificate for the crash server.
	RESTRICTED_CERTIFICATES_PATH="/system/etc/security/cacerts"
	RESTRICTED_CERTIFICATES_PATH_GOOGLE="/system/etc/security/cacerts_google"

	# File whose existence implies we're running and not to start again.
	RUN_FILE="${CRASH_STATE_DIR}/run/crash_sender.pid"

	# Maximum time to sleep between sends.
	SECONDS_SEND_SPREAD=${SECONDS_SEND_SPREAD:-600}

	# Set this to 1 to allow uploading of device coredumps.
	DEVCOREDUMP_UPLOAD_FLAG_FILE="${CRASH_STATE_DIR}/device_coredump_upload_allowed"

	# The weave configuration file.
	WEAVE_CONF_FILE="/etc/weaved/weaved.conf"

	# The os-release.d folder.
	OSRELEASED_FOLDER="/etc/os-release.d"

	# The syslog tag for all logging we emit.
	TAG="$(basename $0)[$$]"

	# Directory to store timestamp files indicating the uploads in the past 24
	# hours.
	TIMESTAMPS_DIR="${CRASH_STATE_DIR}/crash_sender"

	# Temp directory for this process.
	TMP_DIR=""

	# Crash report log file.
	CRASH_LOG="${CRASH_STATE_DIR}/log/uploads.log"

	lecho() {
	log -t "${TAG}" "$@"
	}

	lwarn() {
	lecho -psyslog.warn "$@"
	}

	# Returns true if mock is enabled.
	is_mock() {
	[ -f "${MOCK_CRASH_SENDING}" ] && return 0
	return 1
	}

	is_mock_successful() {
	local mock_in=$(cat "${MOCK_CRASH_SENDING}")
	[ "${mock_in}" = "" ] && return 0 # empty file means success
	return 1
	}

	cleanup() {
	if [ -n "${TMP_DIR}" ]; then
	rm -rf "${TMP_DIR}"
	fi
	rm -f "${RUN_FILE}"
	if [ -n "${CRASH_SENDER_LOCK}" ]; then
	rm -rf "${CRASH_SENDER_LOCK}"
	fi
	crash_done
	}

	crash_done() {
	if is_mock; then
	# For testing purposes, emit a message to log so that we
	# know when the test has received all the messages from this run.
	lecho "crash_sender done."
	fi
	}

	is_official_image() {
	[ ${FORCE_OFFICIAL} -ne 0 ] && return 0
	if [ "$(getprop ro.secure)" = "1" ]; then
	return 0
	else
	return 1
	fi
	}

	# Returns 0 if the a crash test is currently running. NOTE: Mirrors
	# crash_collector.cc:CrashCollector::IsCrashTestInProgress().
	is_crash_test_in_progress() {
	[ -f "${CRASH_TEST_IN_PROGRESS_FILE}" ] && return 0
	return 1
	}

	# Returns 0 if we should consider ourselves to be running on a developer
	# image. NOTE: Mirrors crash_collector.cc:CrashCollector::IsDeveloperImage().
	is_developer_image() {
	# If we're testing crash reporter itself, we don't want to special-case
	# for developer images.
	is_crash_test_in_progress && return 1
	[ -f "${LEAVE_CORE_FILE}" ] && return 0
	return 1
	}

	# Returns 0 if we should consider ourselves to be running on a test image.
	is_test_image() {
	# If we're testing crash reporter itself, we don't want to special-case
	# for test images.
	is_crash_test_in_progress && return 1
	case $(get_channel) in
	test*) return 0;;
	esac
	return 1
	}

	# Returns 0 if the machine booted up in developer mode.
	is_developer_mode() {
	[ ${MOCK_DEVELOPER_MODE} -ne 0 ] && return 0
	# If we're testing crash reporter itself, we don't want to special-case
	# for developer mode.
	is_crash_test_in_progress && return 1
	if [ "$(getprop ro.debuggable)" = "1" ]; then
	return 0
	else
	return 1
	fi
	}

	# Returns the path of the certificates directory to be used when sending
	# reports to the crash server.
	# If crash_reporter.full_certs=1, return the full certificates path.
	# Otherwise return the Google-specific certificates path.
	get_certificates_path() {
	if [ "$(getprop crash_reporter.full_certs)" = "1" ]; then
	echo "${RESTRICTED_CERTIFICATES_PATH}"
	else
	echo "${RESTRICTED_CERTIFICATES_PATH_GOOGLE}"
	fi
	}

	# Return 0 if the uploading of device coredumps is allowed.
	is_device_coredump_upload_allowed() {
	[ -f "${DEVCOREDUMP_UPLOAD_FLAG_FILE}" ] && return 0
	return 1
	}

	# Generate a uniform random number in 0..max-1.
	# POSIX arithmetic expansion requires support of at least signed long integers.
	# On 32-bit systems, that may mean 32-bit signed integers, in which case the
	# 32-bit random number read from /dev/urandom may be interpreted as negative
	# when used inside an arithmetic expansion (since the high bit might be set).
	# mksh at least is known to behave this way.
	# For this case, simply take the absolute value, which will still give a
	# roughly uniform random distribution for the modulo (as we are merely ignoring
	# the high/sign bit).
	# See corresponding Arithmetic Expansion and Arithmetic Expression sections:
	# POSIX: http://pubs.opengroup.org/onlinepubs/009695399/utilities/xcu_chap02.html#tag_02_06_04
	# mksh: http://linux.die.net/man/1/mksh
	generate_uniform_random() {
	local max=$1
	local random="$(od -An -N4 -tu /dev/urandom)"
	echo $(((random < 0 ? -random : random) % max))
	}

	# Check if sending a crash now does not exceed the maximum 24hr rate and
	# commit to doing so, if not.
	check_rate() {
	mkdir -p ${TIMESTAMPS_DIR}
	# Only consider minidumps written in the past 24 hours by removing all older.
	find "${TIMESTAMPS_DIR}" -mindepth 1 -mtime +1 \
	-exec rm -- '{}' ';'
	local sends_in_24hrs=$(echo "${TIMESTAMPS_DIR}"/* \| wc -w)
	lecho "Current send rate: ${sends_in_24hrs}sends/24hrs"
	if [ ${sends_in_24hrs} -ge ${MAX_CRASH_RATE} ]; then
	lecho "Cannot send more crashes:"
	lecho " current ${sends_in_24hrs}send/24hrs >= " \
	"max ${MAX_CRASH_RATE}send/24hrs"
	return 1
	fi
	mktemp "${TIMESTAMPS_DIR}"/XXXXXX > /dev/null
	return 0
	}

	# Gets the base part of a crash report file, such as name.01234.5678.9012 from
	# name.01234.5678.9012.meta or name.01234.5678.9012.log.tar.xz. We make sure
	# "name" is sanitized in CrashCollector::Sanitize to not include any periods.
	get_base() {
	echo "$1" \| cut -d. -f-4
	}

	get_extension() {
	local extension="${1##*.}"
	local filename="${1%.*}"
	# For gzipped file, we ignore .gz and get the real extension
	if [ "${extension}" = "gz" ]; then
	echo "${filename##*.}"
	else
	echo "${extension}"
	fi
	}

	# Return which kind of report the given metadata file relates to
	get_kind() {
	local payload="$(get_key_value "$1" "payload")"
	if [ ! -r "${payload}" ]; then
	lecho "Missing payload: ${payload}"
	echo "undefined"
	return
	fi
	local kind="$(get_extension "${payload}")"
	if [ "${kind}" = "dmp" ]; then
	echo "minidump"
	return
	fi
	echo "${kind}"
	}

	get_key_value() {
	local file="$1" key="$2" value

	if [ -f "${file}/${key}" ]; then
	# Get the value from a folder where each key is its own file. The key
	# file's entire contents is the value.
	value=$(cat "${file}/${key}")
	elif [ -f "${file}" ]; then
	# Get the value from a file that has multiple key=value combinations.
	# Return the first entry. There shouldn't be more than one anyways.
	# Substr at length($1) + 2 skips past the key and following = sign (awk
	# uses 1-based indexes), but preserves embedded = characters.
	value=$(sed -n "/^${key}[[:space:]]=/{s:^[^=]=::p;q}" "${file}")
	fi

	echo "${value:-undefined}"
	}

	get_keys() {
	local file="$1" regex="$2"

	cut -d '=' -f1 "${file}" \| grep --color=never "${regex}"
	}

	# Return the channel name (sans "-channel" suffix).
	get_channel() {
	getprop ro.product.channel \| sed 's:-channel$::'
	}

	# Return the hardware class or "undefined".
	get_hardware_class() {
	if [ -r "${HWCLASS_PATH}" ]; then
	cat "${HWCLASS_PATH}"
	else
	echo "undefined"
	fi
	}

	# Return the log string filtered with only JSON-safe white-listed characters.
	filter_log_string() {
	echo "$1" \| tr -cd '[:alnum:]_.\-:;'
	}

	send_crash() {
	local meta_path="$1"
	local report_payload="$(get_key_value "${meta_path}" "payload")"
	local kind="$(get_kind "${meta_path}")"
	local exec_name="$(get_key_value "${meta_path}" "exec_name")"
	local url="$(get_key_value "${OSRELEASED_FOLDER}" "crash_server")"
	local bdk_version="$(get_key_value "${meta_path}" "bdk_version")"
	local hwclass="$(get_hardware_class)"
	local write_payload_size="$(get_key_value "${meta_path}" "payload_size")"
	local log="$(get_key_value "${meta_path}" "log")"
	local sig="$(get_key_value "${meta_path}" "sig")"
	local send_payload_size="$(stat -c "%s" "${report_payload}" 2>/dev/null)"
	local product="$(get_key_value "${meta_path}" "product_id")"
	local version="$(get_key_value "${meta_path}" "product_version")"
	local upload_prefix="$(get_key_value "${meta_path}" "upload_prefix")"
	local guid
	local model_manifest_id="$(get_key_value "${WEAVE_CONF_FILE}" "model_id")"

	# If crash_reporter.server is not set return with an error.
	if [ -z "${url}" ]; then
	lecho "Configuration error: crash_reporter.server not set."
	return 1
	fi

	set -- \
	-F "write_payload_size=${write_payload_size}" \
	-F "send_payload_size=${send_payload_size}"
	if [ "${sig}" != "undefined" ]; then
	set -- "$@" \
	-F "sig=${sig}" \
	-F "sig2=${sig}"
	fi
	if [ -r "${report_payload}" ]; then
	set -- "$@" \
	-F "upload_file_${kind}=@${report_payload}"
	fi
	if [ "${log}" != "undefined" -a -r "${log}" ]; then
	set -- "$@" \
	-F "log=@${log}"
	fi

	if [ "${upload_prefix}" = "undefined" ]; then
	upload_prefix=""
	fi

	# Grab any variable that begins with upload_.
	local v
	for k in $(get_keys "${meta_path}" "^upload_"); do
	v="$(get_key_value "${meta_path}" "${k}")"
	case ${k} in
	# Product & version are handled separately.
	upload_var_prod) ;;
	upload_var_ver) ;;
	upload_var_*)
	set -- "$@" -F "${upload_prefix}${k#upload_var_}=${v}"
	;;
	upload_file_*)
	if [ -r "${v}" ]; then
	set -- "$@" -F "${upload_prefix}${k#upload_file_}=@${v}"
	fi
	;;
	esac
	done

	# If ID or VERSION_ID is undefined, we use the default product name
	# and bdk_version from /etc/os-release.d.
	if [ "${product}" = "undefined" ]; then
	product="${BRILLO_PRODUCT}"
	fi
	if [ "${version}" = "undefined" ]; then
	version="${bdk_version}"
	fi

	local image_type
	if is_test_image; then
	image_type="test"
	elif is_developer_image; then
	image_type="dev"
	elif [ ${FORCE_OFFICIAL} -ne 0 ]; then
	image_type="force-official"
	elif is_mock && ! is_mock_successful; then
	image_type="mock-fail"
	fi

	local boot_mode
	if is_developer_mode; then
	boot_mode="dev"
	fi

	# Need to strip dashes ourselves as Chrome preserves it in the file
	# nowadays. This is also what the Chrome breakpad client does.
	guid=$(tr -d '-' < "${GUID_FILE}")

	local error_type="$(get_key_value "${meta_path}" "error_type")"
	[ "${error_type}" = "undefined" ] && error_type=

	lecho "Sending crash:"
	if [ "${product}" != "${BRILLO_PRODUCT}" ]; then
	lecho " Sending crash report on behalf of ${product}"
	fi
	lecho " Metadata: ${meta_path} (${kind})"
	lecho " Payload: ${report_payload}"
	lecho " Version: ${version}"
	lecho " Bdk Version: ${bdk_version}"
	[ -n "${image_type}" ] && lecho " Image type: ${image_type}"
	[ -n "${boot_mode}" ] && lecho " Boot mode: ${boot_mode}"
	if is_mock; then
	lecho " Product: ${product}"
	lecho " URL: ${url}"
	lecho " HWClass: ${hwclass}"
	lecho " write_payload_size: ${write_payload_size}"
	lecho " send_payload_size: ${send_payload_size}"
	if [ "${log}" != "undefined" ]; then
	lecho " log: @${log}"
	fi
	if [ "${sig}" != "undefined" ]; then
	lecho " sig: ${sig}"
	fi
	fi
	lecho " Exec name: ${exec_name}"
	[ -n "${error_type}" ] && lecho " Error type: ${error_type}"
	if is_mock; then
	if ! is_mock_successful; then
	lecho "Mocking unsuccessful send"
	return 1
	fi
	lecho "Mocking successful send"
	return 0
	fi

	# Read in the first proxy, if any, for a given URL. NOTE: The
	# double-quotes are necessary due to a bug in dash with the "local"
	# builtin command and values that have spaces in them (see
	# "https://bugs.launchpad.net/ubuntu/+source/dash/+bug/139097").
	if [ -f "${LIST_PROXIES}" ]; then
	local proxy ret
	proxy=$("${LIST_PROXIES}" --quiet "${url}")
	ret=$?
	if [ ${ret} -ne 0 ]; then
	proxy=''
	lwarn "Listing proxies failed with exit code ${ret}"
	else
	proxy=$(echo "${proxy}" \| head -1)
	fi
	fi
	# if a direct connection should be used, unset the proxy variable.
	[ "${proxy}" = "direct://" ] && proxy=
	local report_id="${TMP_DIR}/report_id"
	local curl_stderr="${TMP_DIR}/curl_stderr"

	set +e
	curl "${url}" -f -v ${proxy:+--proxy "$proxy"} \
	--capath "$(get_certificates_path)" --ciphers HIGH \
	-F "prod=${product}" \
	-F "ver=${version}" \
	-F "bdk_version=${bdk_version}" \
	-F "hwclass=${hwclass}" \
	-F "exec_name=${exec_name}" \
	-F "model_manifest_id=${model_manifest_id}" \
	${image_type:+-F "image_type=${image_type}"} \
	${boot_mode:+-F "boot_mode=${boot_mode}"} \
	${error_type:+-F "error_type=${error_type}"} \
	-F "guid=${guid}" \
	-o "${report_id}" \
	"$@" \
	2>"${curl_stderr}"
	curl_result=$?
	set -e

	if [ ${curl_result} -eq 0 ]; then
	local id="$(cat "${report_id}")"
	local timestamp="$(date +%s)"
	local filter_prod="$(filter_log_string "${product}")"
	local filter_exec="$(filter_log_string "${exec_name}")"
	if [ "${filter_prod}" != "${product}" ]; then
	lwarn "Product name filtered to: ${filter_prod}."
	fi
	if [ "${filter_exec}" != "${exec_name}" ]; then
	lwarn "Exec name filtered to: ${filter_exec}."
	fi
	printf "{'time':%s,'id':'%s','product':'%s','exec_name':'%s'}\n" \
	"${timestamp}" "${id}" "${filter_prod}" "${filter_exec}" >> "${CRASH_LOG}"
	lecho "Crash report receipt ID ${id}"
	else
	lecho "Crash sending failed with exit code ${curl_result}: " \
	"$(cat "${curl_stderr}")"
	fi

	rm -f "${report_id}"

	return ${curl_result}
	}

	# *.meta files always end with done=1 so we can tell if they are complete.
	is_complete_metadata() {
	grep -q "done=1" "$1"
	}

	# Remove the given report path.
	remove_report() {
	local base="${1%.*}"
	rm -f -- "${base}".*
	}

	# Send all crashes from the given directory. This applies even when we're on a
	# 3G connection (see crosbug.com/3304 for discussion).
	send_crashes() {
	local dir="$1"
	lecho "Sending crashes for ${dir}"

	if [ ! -d "${dir}" ]; then
	return
	fi

	# Consider any old files which still have no corresponding meta file
	# as orphaned, and remove them.
	for old_file in $(find "${dir}" -mindepth 1 \
	-mtime +1 -type f); do
	if [ ! -e "$(get_base "${old_file}").meta" ]; then
	lecho "Removing old orphaned file: ${old_file}."
	rm -f -- "${old_file}"
	fi
	done

	# Look through all metadata (*.meta) files, oldest first. That way, the rate
	# limit does not stall old crashes if there's a high amount of new crashes
	# coming in.
	# For each crash report, first evaluate conditions that might lead to its
	# removal to honor user choice and to free disk space as soon as possible,
	# then decide whether it should be sent right now or kept for later sending.
	for meta_path in $(ls -1tr "${dir}"/*.meta 2>/dev/null); do
	lecho "Considering metadata ${meta_path}."

	local kind=$(get_kind "${meta_path}")
	if [ "${kind}" != "minidump" ] && \
	[ "${kind}" != "kcrash" ] && \
	[ "${kind}" != "log" ] &&
	[ "${kind}" != "devcore" ]; then
	lecho "Unknown report kind ${kind}. Removing report."
	remove_report "${meta_path}"
	continue
	fi

	if ! is_complete_metadata "${meta_path}"; then
	# This report is incomplete, so if it's old, just remove it.
	local old_meta=$(find "${dir}" -mindepth 1 -name \
	$(basename "${meta_path}") -mtime +1 -type f)
	if [ -n "${old_meta}" ]; then
	lecho "Removing old incomplete metadata."
	remove_report "${meta_path}"
	else
	lecho "Ignoring recent incomplete metadata."
	fi
	continue
	fi

	# Ignore device coredump if device coredump uploading is not allowed.
	if [ "${kind}" = "devcore" ] && ! is_device_coredump_upload_allowed; then
	lecho "Ignoring device coredump. Device coredump upload not allowed."
	continue
	fi

	if ! is_mock && ! is_official_image; then
	lecho "Not an official OS version. Removing crash."
	remove_report "${meta_path}"
	continue
	fi

	# Remove existing crashes in case user consent has not (yet) been given or
	# has been revoked. This must come after the guest mode check because
	# metrics_client always returns "not consented" in guest mode.
	if ! metrics_client -c; then
	lecho "Crash reporting is disabled. Removing crash."
	remove_report "${meta_path}"
	continue
	fi

	# Skip report if the upload rate is exceeded. (Don't exit right now because
	# subsequent reports may be candidates for deletion.)
	if ! check_rate; then
	lecho "Sending ${meta_path} would exceed rate. Leaving for later."
	continue
	fi

	# The .meta file should be written after all to-be-uploaded files that it
	# references. Nevertheless, as a safeguard, a hold-off time of thirty
	# seconds after writing the .meta file is ensured. Also, sending of crash
	# reports is spread out randomly by up to SECONDS_SEND_SPREAD. Thus, for
	# the sleep call the greater of the two delays is used.
	local now=$(date +%s)
	local holdoff_time=$(($(stat -c "%Y" "${meta_path}") + 30 - ${now}))
	local spread_time=$(generate_uniform_random "${SECONDS_SEND_SPREAD}")
	local sleep_time
	if [ ${spread_time} -gt ${holdoff_time} ]; then
	sleep_time="${spread_time}"
	else
	sleep_time="${holdoff_time}"
	fi
	lecho "Scheduled to send in ${sleep_time}s."
	if ! is_mock; then
	if ! sleep "${sleep_time}"; then
	lecho "Sleep failed"
	return 1
	fi
	fi

	# Try to upload.
	if ! send_crash "${meta_path}"; then
	lecho "Problem sending ${meta_path}, not removing."
	continue
	fi

	# Send was successful, now remove.
	lecho "Successfully sent crash ${meta_path} and removing."
	remove_report "${meta_path}"
	done
	}

	usage() {
	cat <<EOF
	Usage: crash_sender [options]

	Options:
	-e <var>=<val> Set env \|var\| to \|val\| (only some vars)
	EOF
	exit ${1:-1}
	}

	parseargs() {
	# Parse the command line arguments.
	while [ $# -gt 0 ]; do
	case $1 in
	-e)
	shift
	case $1 in
	FORCE_OFFICIAL=*\|\
	MAX_CRASH_RATE=*\|\
	MOCK_DEVELOPER_MODE=*\|\
	OVERRIDE_PAUSE_SENDING=*\|\
	SECONDS_SEND_SPREAD=*)
	export "$1"
	;;
	*)
	lecho "Unknown var passed to -e: $1"
	exit 1
	;;
	esac
	;;
	-h)
	usage 0
	;;
	*)
	lecho "Unknown options: $*"
	exit 1
	;;
	esac
	shift
	done
	}

	main() {
	parseargs "$@"

	if [ -e "${PAUSE_CRASH_SENDING}" ] && \
	[ ${OVERRIDE_PAUSE_SENDING} -eq 0 ]; then
	lecho "Exiting early due to ${PAUSE_CRASH_SENDING}."
	exit 1
	fi

	if is_test_image; then
	lecho "Exiting early due to test image."
	exit 1
	fi

	# We don't perform checks on this because we have a master lock with the
	# CRASH_SENDER_LOCK file. This pid file is for the system to keep track
	# (like with autotests) that we're still running.
	echo $$ > "${RUN_FILE}"

	for dependency in "$(get_certificates_path)"; do
	if [ ! -x "${dependency}" ]; then
	lecho "Fatal: Crash sending disabled: ${dependency} not found."
	exit 1
	fi
	done

	TMP_DIR="$(mktemp -d "${CRASH_STATE_DIR}/tmp/crash_sender.XXXXXX")"

	# Send system-wide crashes
	send_crashes "${CRASH_STATE_DIR}/crash"
	}

	trap cleanup EXIT INT TERM

	#TODO(http://b/23937249): Change the locking logic back to using flock.
	if ! mkdir "${CRASH_SENDER_LOCK}" 2>/dev/null; then
	lecho "Already running; quitting."
	crash_done
	exit 1
	fi
	main "$@"