| /* | |
| * Copyright (C) 2008 The Android Open Source Project | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); | |
| * you may not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| /* | |
| * Read-only access to Zip archives, with minimal heap allocation. | |
| */ | |
| #include <assert.h> | |
| #include <errno.h> | |
| #include <fcntl.h> | |
| #include <inttypes.h> | |
| #include <limits.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <unistd.h> | |
| #include <memory> | |
| #include <vector> | |
| #include "android-base/file.h" | |
| #include "android-base/macros.h" // TEMP_FAILURE_RETRY may or may not be in unistd | |
| #include "android-base/memory.h" | |
| #include "log/log.h" | |
| #include "utils/Compat.h" | |
| #include "utils/FileMap.h" | |
| #include "zlib.h" | |
| #include "entry_name_utils-inl.h" | |
| #include "zip_archive_common.h" | |
| #include "ziparchive/zip_archive.h" | |
| using android::base::get_unaligned; | |
| // This is for windows. If we don't open a file in binary mode, weird | |
| // things will happen. | |
| #ifndef O_BINARY | |
| #define O_BINARY 0 | |
| #endif | |
| // The maximum number of bytes to scan backwards for the EOCD start. | |
| static const uint32_t kMaxEOCDSearch = kMaxCommentLen + sizeof(EocdRecord); | |
| static const char* kErrorMessages[] = { | |
| "Unknown return code.", | |
| "Iteration ended", | |
| "Zlib error", | |
| "Invalid file", | |
| "Invalid handle", | |
| "Duplicate entries in archive", | |
| "Empty archive", | |
| "Entry not found", | |
| "Invalid offset", | |
| "Inconsistent information", | |
| "Invalid entry name", | |
| "I/O Error", | |
| "File mapping failed" | |
| }; | |
| static const int32_t kErrorMessageUpperBound = 0; | |
| static const int32_t kIterationEnd = -1; | |
| // We encountered a Zlib error when inflating a stream from this file. | |
| // Usually indicates file corruption. | |
| static const int32_t kZlibError = -2; | |
| // The input file cannot be processed as a zip archive. Usually because | |
| // it's too small, too large or does not have a valid signature. | |
| static const int32_t kInvalidFile = -3; | |
| // An invalid iteration / ziparchive handle was passed in as an input | |
| // argument. | |
| static const int32_t kInvalidHandle = -4; | |
| // The zip archive contained two (or possibly more) entries with the same | |
| // name. | |
| static const int32_t kDuplicateEntry = -5; | |
| // The zip archive contains no entries. | |
| static const int32_t kEmptyArchive = -6; | |
| // The specified entry was not found in the archive. | |
| static const int32_t kEntryNotFound = -7; | |
| // The zip archive contained an invalid local file header pointer. | |
| static const int32_t kInvalidOffset = -8; | |
| // The zip archive contained inconsistent entry information. This could | |
| // be because the central directory & local file header did not agree, or | |
| // if the actual uncompressed length or crc32 do not match their declared | |
| // values. | |
| static const int32_t kInconsistentInformation = -9; | |
| // An invalid entry name was encountered. | |
| static const int32_t kInvalidEntryName = -10; | |
| // An I/O related system call (read, lseek, ftruncate, map) failed. | |
| static const int32_t kIoError = -11; | |
| // We were not able to mmap the central directory or entry contents. | |
| static const int32_t kMmapFailed = -12; | |
| static const int32_t kErrorMessageLowerBound = -13; | |
| /* | |
| * A Read-only Zip archive. | |
| * | |
| * We want "open" and "find entry by name" to be fast operations, and | |
| * we want to use as little memory as possible. We memory-map the zip | |
| * central directory, and load a hash table with pointers to the filenames | |
| * (which aren't null-terminated). The other fields are at a fixed offset | |
| * from the filename, so we don't need to extract those (but we do need | |
| * to byte-read and endian-swap them every time we want them). | |
| * | |
| * It's possible that somebody has handed us a massive (~1GB) zip archive, | |
| * so we can't expect to mmap the entire file. | |
| * | |
| * To speed comparisons when doing a lookup by name, we could make the mapping | |
| * "private" (copy-on-write) and null-terminate the filenames after verifying | |
| * the record structure. However, this requires a private mapping of | |
| * every page that the Central Directory touches. Easier to tuck a copy | |
| * of the string length into the hash table entry. | |
| */ | |
| struct ZipArchive { | |
| /* open Zip archive */ | |
| const int fd; | |
| const bool close_file; | |
| /* mapped central directory area */ | |
| off64_t directory_offset; | |
| android::FileMap directory_map; | |
| /* number of entries in the Zip archive */ | |
| uint16_t num_entries; | |
| /* | |
| * We know how many entries are in the Zip archive, so we can have a | |
| * fixed-size hash table. We define a load factor of 0.75 and overallocat | |
| * so the maximum number entries can never be higher than | |
| * ((4 * UINT16_MAX) / 3 + 1) which can safely fit into a uint32_t. | |
| */ | |
| uint32_t hash_table_size; | |
| ZipString* hash_table; | |
| ZipArchive(const int fd, bool assume_ownership) : | |
| fd(fd), | |
| close_file(assume_ownership), | |
| directory_offset(0), | |
| num_entries(0), | |
| hash_table_size(0), | |
| hash_table(NULL) {} | |
| ~ZipArchive() { | |
| if (close_file && fd >= 0) { | |
| close(fd); | |
| } | |
| free(hash_table); | |
| } | |
| }; | |
| /* | |
| * Round up to the next highest power of 2. | |
| * | |
| * Found on http://graphics.stanford.edu/~seander/bithacks.html. | |
| */ | |
| static uint32_t RoundUpPower2(uint32_t val) { | |
| val--; | |
| val |= val >> 1; | |
| val |= val >> 2; | |
| val |= val >> 4; | |
| val |= val >> 8; | |
| val |= val >> 16; | |
| val++; | |
| return val; | |
| } | |
| static uint32_t ComputeHash(const ZipString& name) { | |
| uint32_t hash = 0; | |
| uint16_t len = name.name_length; | |
| const uint8_t* str = name.name; | |
| while (len--) { | |
| hash = hash * 31 + *str++; | |
| } | |
| return hash; | |
| } | |
| /* | |
| * Convert a ZipEntry to a hash table index, verifying that it's in a | |
| * valid range. | |
| */ | |
| static int64_t EntryToIndex(const ZipString* hash_table, | |
| const uint32_t hash_table_size, | |
| const ZipString& name) { | |
| const uint32_t hash = ComputeHash(name); | |
| // NOTE: (hash_table_size - 1) is guaranteed to be non-negative. | |
| uint32_t ent = hash & (hash_table_size - 1); | |
| while (hash_table[ent].name != NULL) { | |
| if (hash_table[ent] == name) { | |
| return ent; | |
| } | |
| ent = (ent + 1) & (hash_table_size - 1); | |
| } | |
| ALOGV("Zip: Unable to find entry %.*s", name.name_length, name.name); | |
| return kEntryNotFound; | |
| } | |
| /* | |
| * Add a new entry to the hash table. | |
| */ | |
| static int32_t AddToHash(ZipString *hash_table, const uint64_t hash_table_size, | |
| const ZipString& name) { | |
| const uint64_t hash = ComputeHash(name); | |
| uint32_t ent = hash & (hash_table_size - 1); | |
| /* | |
| * We over-allocated the table, so we're guaranteed to find an empty slot. | |
| * Further, we guarantee that the hashtable size is not 0. | |
| */ | |
| while (hash_table[ent].name != NULL) { | |
| if (hash_table[ent] == name) { | |
| // We've found a duplicate entry. We don't accept it | |
| ALOGW("Zip: Found duplicate entry %.*s", name.name_length, name.name); | |
| return kDuplicateEntry; | |
| } | |
| ent = (ent + 1) & (hash_table_size - 1); | |
| } | |
| hash_table[ent].name = name.name; | |
| hash_table[ent].name_length = name.name_length; | |
| return 0; | |
| } | |
| static int32_t MapCentralDirectory0(int fd, const char* debug_file_name, | |
| ZipArchive* archive, off64_t file_length, | |
| off64_t read_amount, uint8_t* scan_buffer) { | |
| const off64_t search_start = file_length - read_amount; | |
| if (lseek64(fd, search_start, SEEK_SET) != search_start) { | |
| ALOGW("Zip: seek %" PRId64 " failed: %s", static_cast<int64_t>(search_start), | |
| strerror(errno)); | |
| return kIoError; | |
| } | |
| ssize_t actual = TEMP_FAILURE_RETRY( | |
| read(fd, scan_buffer, static_cast<size_t>(read_amount))); | |
| if (actual != static_cast<ssize_t>(read_amount)) { | |
| ALOGW("Zip: read %" PRId64 " failed: %s", static_cast<int64_t>(read_amount), | |
| strerror(errno)); | |
| return kIoError; | |
| } | |
| /* | |
| * Scan backward for the EOCD magic. In an archive without a trailing | |
| * comment, we'll find it on the first try. (We may want to consider | |
| * doing an initial minimal read; if we don't find it, retry with a | |
| * second read as above.) | |
| */ | |
| int i = read_amount - sizeof(EocdRecord); | |
| for (; i >= 0; i--) { | |
| if (scan_buffer[i] == 0x50) { | |
| uint32_t* sig_addr = reinterpret_cast<uint32_t*>(&scan_buffer[i]); | |
| if (get_unaligned<uint32_t>(sig_addr) == EocdRecord::kSignature) { | |
| ALOGV("+++ Found EOCD at buf+%d", i); | |
| break; | |
| } | |
| } | |
| } | |
| if (i < 0) { | |
| ALOGD("Zip: EOCD not found, %s is not zip", debug_file_name); | |
| return kInvalidFile; | |
| } | |
| const off64_t eocd_offset = search_start + i; | |
| const EocdRecord* eocd = reinterpret_cast<const EocdRecord*>(scan_buffer + i); | |
| /* | |
| * Verify that there's no trailing space at the end of the central directory | |
| * and its comment. | |
| */ | |
| const off64_t calculated_length = eocd_offset + sizeof(EocdRecord) | |
| + eocd->comment_length; | |
| if (calculated_length != file_length) { | |
| ALOGW("Zip: %" PRId64 " extraneous bytes at the end of the central directory", | |
| static_cast<int64_t>(file_length - calculated_length)); | |
| return kInvalidFile; | |
| } | |
| /* | |
| * Grab the CD offset and size, and the number of entries in the | |
| * archive and verify that they look reasonable. | |
| */ | |
| if (eocd->cd_start_offset + eocd->cd_size > eocd_offset) { | |
| ALOGW("Zip: bad offsets (dir %" PRIu32 ", size %" PRIu32 ", eocd %" PRId64 ")", | |
| eocd->cd_start_offset, eocd->cd_size, static_cast<int64_t>(eocd_offset)); | |
| return kInvalidOffset; | |
| } | |
| if (eocd->num_records == 0) { | |
| ALOGW("Zip: empty archive?"); | |
| return kEmptyArchive; | |
| } | |
| ALOGV("+++ num_entries=%" PRIu32 " dir_size=%" PRIu32 " dir_offset=%" PRIu32, | |
| eocd->num_records, eocd->cd_size, eocd->cd_start_offset); | |
| /* | |
| * It all looks good. Create a mapping for the CD, and set the fields | |
| * in archive. | |
| */ | |
| if (!archive->directory_map.create(debug_file_name, fd, | |
| static_cast<off64_t>(eocd->cd_start_offset), | |
| static_cast<size_t>(eocd->cd_size), true /* read only */) ) { | |
| return kMmapFailed; | |
| } | |
| archive->num_entries = eocd->num_records; | |
| archive->directory_offset = eocd->cd_start_offset; | |
| return 0; | |
| } | |
| /* | |
| * Find the zip Central Directory and memory-map it. | |
| * | |
| * On success, returns 0 after populating fields from the EOCD area: | |
| * directory_offset | |
| * directory_map | |
| * num_entries | |
| */ | |
| static int32_t MapCentralDirectory(int fd, const char* debug_file_name, | |
| ZipArchive* archive) { | |
| // Test file length. We use lseek64 to make sure the file | |
| // is small enough to be a zip file (Its size must be less than | |
| // 0xffffffff bytes). | |
| off64_t file_length = lseek64(fd, 0, SEEK_END); | |
| if (file_length == -1) { | |
| ALOGV("Zip: lseek on fd %d failed", fd); | |
| return kInvalidFile; | |
| } | |
| if (file_length > static_cast<off64_t>(0xffffffff)) { | |
| ALOGV("Zip: zip file too long %" PRId64, static_cast<int64_t>(file_length)); | |
| return kInvalidFile; | |
| } | |
| if (file_length < static_cast<off64_t>(sizeof(EocdRecord))) { | |
| ALOGV("Zip: length %" PRId64 " is too small to be zip", static_cast<int64_t>(file_length)); | |
| return kInvalidFile; | |
| } | |
| /* | |
| * Perform the traditional EOCD snipe hunt. | |
| * | |
| * We're searching for the End of Central Directory magic number, | |
| * which appears at the start of the EOCD block. It's followed by | |
| * 18 bytes of EOCD stuff and up to 64KB of archive comment. We | |
| * need to read the last part of the file into a buffer, dig through | |
| * it to find the magic number, parse some values out, and use those | |
| * to determine the extent of the CD. | |
| * | |
| * We start by pulling in the last part of the file. | |
| */ | |
| off64_t read_amount = kMaxEOCDSearch; | |
| if (file_length < read_amount) { | |
| read_amount = file_length; | |
| } | |
| uint8_t* scan_buffer = reinterpret_cast<uint8_t*>(malloc(read_amount)); | |
| int32_t result = MapCentralDirectory0(fd, debug_file_name, archive, | |
| file_length, read_amount, scan_buffer); | |
| free(scan_buffer); | |
| return result; | |
| } | |
| /* | |
| * Parses the Zip archive's Central Directory. Allocates and populates the | |
| * hash table. | |
| * | |
| * Returns 0 on success. | |
| */ | |
| static int32_t ParseZipArchive(ZipArchive* archive) { | |
| const uint8_t* const cd_ptr = | |
| reinterpret_cast<const uint8_t*>(archive->directory_map.getDataPtr()); | |
| const size_t cd_length = archive->directory_map.getDataLength(); | |
| const uint16_t num_entries = archive->num_entries; | |
| /* | |
| * Create hash table. We have a minimum 75% load factor, possibly as | |
| * low as 50% after we round off to a power of 2. There must be at | |
| * least one unused entry to avoid an infinite loop during creation. | |
| */ | |
| archive->hash_table_size = RoundUpPower2(1 + (num_entries * 4) / 3); | |
| archive->hash_table = reinterpret_cast<ZipString*>(calloc(archive->hash_table_size, | |
| sizeof(ZipString))); | |
| /* | |
| * Walk through the central directory, adding entries to the hash | |
| * table and verifying values. | |
| */ | |
| const uint8_t* const cd_end = cd_ptr + cd_length; | |
| const uint8_t* ptr = cd_ptr; | |
| for (uint16_t i = 0; i < num_entries; i++) { | |
| const CentralDirectoryRecord* cdr = | |
| reinterpret_cast<const CentralDirectoryRecord*>(ptr); | |
| if (cdr->record_signature != CentralDirectoryRecord::kSignature) { | |
| ALOGW("Zip: missed a central dir sig (at %" PRIu16 ")", i); | |
| return -1; | |
| } | |
| if (ptr + sizeof(CentralDirectoryRecord) > cd_end) { | |
| ALOGW("Zip: ran off the end (at %" PRIu16 ")", i); | |
| return -1; | |
| } | |
| const off64_t local_header_offset = cdr->local_file_header_offset; | |
| if (local_header_offset >= archive->directory_offset) { | |
| ALOGW("Zip: bad LFH offset %" PRId64 " at entry %" PRIu16, | |
| static_cast<int64_t>(local_header_offset), i); | |
| return -1; | |
| } | |
| const uint16_t file_name_length = cdr->file_name_length; | |
| const uint16_t extra_length = cdr->extra_field_length; | |
| const uint16_t comment_length = cdr->comment_length; | |
| const uint8_t* file_name = ptr + sizeof(CentralDirectoryRecord); | |
| /* check that file name is valid UTF-8 and doesn't contain NUL (U+0000) characters */ | |
| if (!IsValidEntryName(file_name, file_name_length)) { | |
| return -1; | |
| } | |
| /* add the CDE filename to the hash table */ | |
| ZipString entry_name; | |
| entry_name.name = file_name; | |
| entry_name.name_length = file_name_length; | |
| const int add_result = AddToHash(archive->hash_table, | |
| archive->hash_table_size, entry_name); | |
| if (add_result != 0) { | |
| ALOGW("Zip: Error adding entry to hash table %d", add_result); | |
| return add_result; | |
| } | |
| ptr += sizeof(CentralDirectoryRecord) + file_name_length + extra_length + comment_length; | |
| if ((ptr - cd_ptr) > static_cast<int64_t>(cd_length)) { | |
| ALOGW("Zip: bad CD advance (%tu vs %zu) at entry %" PRIu16, | |
| ptr - cd_ptr, cd_length, i); | |
| return -1; | |
| } | |
| } | |
| ALOGV("+++ zip good scan %" PRIu16 " entries", num_entries); | |
| return 0; | |
| } | |
| static int32_t OpenArchiveInternal(ZipArchive* archive, | |
| const char* debug_file_name) { | |
| int32_t result = -1; | |
| if ((result = MapCentralDirectory(archive->fd, debug_file_name, archive))) { | |
| return result; | |
| } | |
| if ((result = ParseZipArchive(archive))) { | |
| return result; | |
| } | |
| return 0; | |
| } | |
| int32_t OpenArchiveFd(int fd, const char* debug_file_name, | |
| ZipArchiveHandle* handle, bool assume_ownership) { | |
| ZipArchive* archive = new ZipArchive(fd, assume_ownership); | |
| *handle = archive; | |
| return OpenArchiveInternal(archive, debug_file_name); | |
| } | |
| int32_t OpenArchive(const char* fileName, ZipArchiveHandle* handle) { | |
| const int fd = open(fileName, O_RDONLY | O_BINARY, 0); | |
| ZipArchive* archive = new ZipArchive(fd, true); | |
| *handle = archive; | |
| if (fd < 0) { | |
| ALOGW("Unable to open '%s': %s", fileName, strerror(errno)); | |
| return kIoError; | |
| } | |
| return OpenArchiveInternal(archive, fileName); | |
| } | |
| /* | |
| * Close a ZipArchive, closing the file and freeing the contents. | |
| */ | |
| void CloseArchive(ZipArchiveHandle handle) { | |
| ZipArchive* archive = reinterpret_cast<ZipArchive*>(handle); | |
| ALOGV("Closing archive %p", archive); | |
| delete archive; | |
| } | |
| static int32_t UpdateEntryFromDataDescriptor(int fd, | |
| ZipEntry *entry) { | |
| uint8_t ddBuf[sizeof(DataDescriptor) + sizeof(DataDescriptor::kOptSignature)]; | |
| ssize_t actual = TEMP_FAILURE_RETRY(read(fd, ddBuf, sizeof(ddBuf))); | |
| if (actual != sizeof(ddBuf)) { | |
| return kIoError; | |
| } | |
| const uint32_t ddSignature = *(reinterpret_cast<const uint32_t*>(ddBuf)); | |
| const uint16_t offset = (ddSignature == DataDescriptor::kOptSignature) ? 4 : 0; | |
| const DataDescriptor* descriptor = reinterpret_cast<const DataDescriptor*>(ddBuf + offset); | |
| entry->crc32 = descriptor->crc32; | |
| entry->compressed_length = descriptor->compressed_size; | |
| entry->uncompressed_length = descriptor->uncompressed_size; | |
| return 0; | |
| } | |
| // Attempts to read |len| bytes into |buf| at offset |off|. | |
| // | |
| // This method uses pread64 on platforms that support it and | |
| // lseek64 + read on platforms that don't. This implies that | |
| // callers should not rely on the |fd| offset being incremented | |
| // as a side effect of this call. | |
| static inline ssize_t ReadAtOffset(int fd, uint8_t* buf, size_t len, | |
| off64_t off) { | |
| #if !defined(_WIN32) | |
| return TEMP_FAILURE_RETRY(pread64(fd, buf, len, off)); | |
| #else | |
| // The only supported platform that doesn't support pread at the moment | |
| // is Windows. Only recent versions of windows support unix like forks, | |
| // and even there the semantics are quite different. | |
| if (lseek64(fd, off, SEEK_SET) != off) { | |
| ALOGW("Zip: failed seek to offset %" PRId64, off); | |
| return kIoError; | |
| } | |
| return TEMP_FAILURE_RETRY(read(fd, buf, len)); | |
| #endif | |
| } | |
| static int32_t FindEntry(const ZipArchive* archive, const int ent, | |
| ZipEntry* data) { | |
| const uint16_t nameLen = archive->hash_table[ent].name_length; | |
| // Recover the start of the central directory entry from the filename | |
| // pointer. The filename is the first entry past the fixed-size data, | |
| // so we can just subtract back from that. | |
| const uint8_t* ptr = archive->hash_table[ent].name; | |
| ptr -= sizeof(CentralDirectoryRecord); | |
| // This is the base of our mmapped region, we have to sanity check that | |
| // the name that's in the hash table is a pointer to a location within | |
| // this mapped region. | |
| const uint8_t* base_ptr = reinterpret_cast<const uint8_t*>( | |
| archive->directory_map.getDataPtr()); | |
| if (ptr < base_ptr || ptr > base_ptr + archive->directory_map.getDataLength()) { | |
| ALOGW("Zip: Invalid entry pointer"); | |
| return kInvalidOffset; | |
| } | |
| const CentralDirectoryRecord *cdr = | |
| reinterpret_cast<const CentralDirectoryRecord*>(ptr); | |
| // The offset of the start of the central directory in the zipfile. | |
| // We keep this lying around so that we can sanity check all our lengths | |
| // and our per-file structures. | |
| const off64_t cd_offset = archive->directory_offset; | |
| // Fill out the compression method, modification time, crc32 | |
| // and other interesting attributes from the central directory. These | |
| // will later be compared against values from the local file header. | |
| data->method = cdr->compression_method; | |
| data->mod_time = cdr->last_mod_date << 16 | cdr->last_mod_time; | |
| data->crc32 = cdr->crc32; | |
| data->compressed_length = cdr->compressed_size; | |
| data->uncompressed_length = cdr->uncompressed_size; | |
| // Figure out the local header offset from the central directory. The | |
| // actual file data will begin after the local header and the name / | |
| // extra comments. | |
| const off64_t local_header_offset = cdr->local_file_header_offset; | |
| if (local_header_offset + static_cast<off64_t>(sizeof(LocalFileHeader)) >= cd_offset) { | |
| ALOGW("Zip: bad local hdr offset in zip"); | |
| return kInvalidOffset; | |
| } | |
| uint8_t lfh_buf[sizeof(LocalFileHeader)]; | |
| ssize_t actual = ReadAtOffset(archive->fd, lfh_buf, sizeof(lfh_buf), | |
| local_header_offset); | |
| if (actual != sizeof(lfh_buf)) { | |
| ALOGW("Zip: failed reading lfh name from offset %" PRId64, | |
| static_cast<int64_t>(local_header_offset)); | |
| return kIoError; | |
| } | |
| const LocalFileHeader *lfh = reinterpret_cast<const LocalFileHeader*>(lfh_buf); | |
| if (lfh->lfh_signature != LocalFileHeader::kSignature) { | |
| ALOGW("Zip: didn't find signature at start of lfh, offset=%" PRId64, | |
| static_cast<int64_t>(local_header_offset)); | |
| return kInvalidOffset; | |
| } | |
| // Paranoia: Match the values specified in the local file header | |
| // to those specified in the central directory. | |
| if ((lfh->gpb_flags & kGPBDDFlagMask) == 0) { | |
| data->has_data_descriptor = 0; | |
| if (data->compressed_length != lfh->compressed_size | |
| || data->uncompressed_length != lfh->uncompressed_size | |
| || data->crc32 != lfh->crc32) { | |
| ALOGW("Zip: size/crc32 mismatch. expected {%" PRIu32 ", %" PRIu32 | |
| ", %" PRIx32 "}, was {%" PRIu32 ", %" PRIu32 ", %" PRIx32 "}", | |
| data->compressed_length, data->uncompressed_length, data->crc32, | |
| lfh->compressed_size, lfh->uncompressed_size, lfh->crc32); | |
| return kInconsistentInformation; | |
| } | |
| } else { | |
| data->has_data_descriptor = 1; | |
| } | |
| // Check that the local file header name matches the declared | |
| // name in the central directory. | |
| if (lfh->file_name_length == nameLen) { | |
| const off64_t name_offset = local_header_offset + sizeof(LocalFileHeader); | |
| if (name_offset + lfh->file_name_length > cd_offset) { | |
| ALOGW("Zip: Invalid declared length"); | |
| return kInvalidOffset; | |
| } | |
| uint8_t* name_buf = reinterpret_cast<uint8_t*>(malloc(nameLen)); | |
| ssize_t actual = ReadAtOffset(archive->fd, name_buf, nameLen, | |
| name_offset); | |
| if (actual != nameLen) { | |
| ALOGW("Zip: failed reading lfh name from offset %" PRId64, static_cast<int64_t>(name_offset)); | |
| free(name_buf); | |
| return kIoError; | |
| } | |
| if (memcmp(archive->hash_table[ent].name, name_buf, nameLen)) { | |
| free(name_buf); | |
| return kInconsistentInformation; | |
| } | |
| free(name_buf); | |
| } else { | |
| ALOGW("Zip: lfh name did not match central directory."); | |
| return kInconsistentInformation; | |
| } | |
| const off64_t data_offset = local_header_offset + sizeof(LocalFileHeader) | |
| + lfh->file_name_length + lfh->extra_field_length; | |
| if (data_offset > cd_offset) { | |
| ALOGW("Zip: bad data offset %" PRId64 " in zip", static_cast<int64_t>(data_offset)); | |
| return kInvalidOffset; | |
| } | |
| if (static_cast<off64_t>(data_offset + data->compressed_length) > cd_offset) { | |
| ALOGW("Zip: bad compressed length in zip (%" PRId64 " + %" PRIu32 " > %" PRId64 ")", | |
| static_cast<int64_t>(data_offset), data->compressed_length, static_cast<int64_t>(cd_offset)); | |
| return kInvalidOffset; | |
| } | |
| if (data->method == kCompressStored && | |
| static_cast<off64_t>(data_offset + data->uncompressed_length) > cd_offset) { | |
| ALOGW("Zip: bad uncompressed length in zip (%" PRId64 " + %" PRIu32 " > %" PRId64 ")", | |
| static_cast<int64_t>(data_offset), data->uncompressed_length, | |
| static_cast<int64_t>(cd_offset)); | |
| return kInvalidOffset; | |
| } | |
| data->offset = data_offset; | |
| return 0; | |
| } | |
| struct IterationHandle { | |
| uint32_t position; | |
| // We're not using vector here because this code is used in the Windows SDK | |
| // where the STL is not available. | |
| ZipString prefix; | |
| ZipString suffix; | |
| ZipArchive* archive; | |
| IterationHandle(const ZipString* in_prefix, | |
| const ZipString* in_suffix) { | |
| if (in_prefix) { | |
| uint8_t* name_copy = new uint8_t[in_prefix->name_length]; | |
| memcpy(name_copy, in_prefix->name, in_prefix->name_length); | |
| prefix.name = name_copy; | |
| prefix.name_length = in_prefix->name_length; | |
| } else { | |
| prefix.name = NULL; | |
| prefix.name_length = 0; | |
| } | |
| if (in_suffix) { | |
| uint8_t* name_copy = new uint8_t[in_suffix->name_length]; | |
| memcpy(name_copy, in_suffix->name, in_suffix->name_length); | |
| suffix.name = name_copy; | |
| suffix.name_length = in_suffix->name_length; | |
| } else { | |
| suffix.name = NULL; | |
| suffix.name_length = 0; | |
| } | |
| } | |
| ~IterationHandle() { | |
| delete[] prefix.name; | |
| delete[] suffix.name; | |
| } | |
| }; | |
| int32_t StartIteration(ZipArchiveHandle handle, void** cookie_ptr, | |
| const ZipString* optional_prefix, | |
| const ZipString* optional_suffix) { | |
| ZipArchive* archive = reinterpret_cast<ZipArchive*>(handle); | |
| if (archive == NULL || archive->hash_table == NULL) { | |
| ALOGW("Zip: Invalid ZipArchiveHandle"); | |
| return kInvalidHandle; | |
| } | |
| IterationHandle* cookie = new IterationHandle(optional_prefix, optional_suffix); | |
| cookie->position = 0; | |
| cookie->archive = archive; | |
| *cookie_ptr = cookie ; | |
| return 0; | |
| } | |
| void EndIteration(void* cookie) { | |
| delete reinterpret_cast<IterationHandle*>(cookie); | |
| } | |
| int32_t FindEntry(const ZipArchiveHandle handle, const ZipString& entryName, | |
| ZipEntry* data) { | |
| const ZipArchive* archive = reinterpret_cast<ZipArchive*>(handle); | |
| if (entryName.name_length == 0) { | |
| ALOGW("Zip: Invalid filename %.*s", entryName.name_length, entryName.name); | |
| return kInvalidEntryName; | |
| } | |
| const int64_t ent = EntryToIndex(archive->hash_table, | |
| archive->hash_table_size, entryName); | |
| if (ent < 0) { | |
| ALOGV("Zip: Could not find entry %.*s", entryName.name_length, entryName.name); | |
| return ent; | |
| } | |
| return FindEntry(archive, ent, data); | |
| } | |
| int32_t Next(void* cookie, ZipEntry* data, ZipString* name) { | |
| IterationHandle* handle = reinterpret_cast<IterationHandle*>(cookie); | |
| if (handle == NULL) { | |
| return kInvalidHandle; | |
| } | |
| ZipArchive* archive = handle->archive; | |
| if (archive == NULL || archive->hash_table == NULL) { | |
| ALOGW("Zip: Invalid ZipArchiveHandle"); | |
| return kInvalidHandle; | |
| } | |
| const uint32_t currentOffset = handle->position; | |
| const uint32_t hash_table_length = archive->hash_table_size; | |
| const ZipString* hash_table = archive->hash_table; | |
| for (uint32_t i = currentOffset; i < hash_table_length; ++i) { | |
| if (hash_table[i].name != NULL && | |
| (handle->prefix.name_length == 0 || | |
| hash_table[i].StartsWith(handle->prefix)) && | |
| (handle->suffix.name_length == 0 || | |
| hash_table[i].EndsWith(handle->suffix))) { | |
| handle->position = (i + 1); | |
| const int error = FindEntry(archive, i, data); | |
| if (!error) { | |
| name->name = hash_table[i].name; | |
| name->name_length = hash_table[i].name_length; | |
| } | |
| return error; | |
| } | |
| } | |
| handle->position = 0; | |
| return kIterationEnd; | |
| } | |
| class Writer { | |
| public: | |
| virtual bool Append(uint8_t* buf, size_t buf_size) = 0; | |
| virtual ~Writer() {} | |
| protected: | |
| Writer() = default; | |
| private: | |
| DISALLOW_COPY_AND_ASSIGN(Writer); | |
| }; | |
| // A Writer that writes data to a fixed size memory region. | |
| // The size of the memory region must be equal to the total size of | |
| // the data appended to it. | |
| class MemoryWriter : public Writer { | |
| public: | |
| MemoryWriter(uint8_t* buf, size_t size) : Writer(), | |
| buf_(buf), size_(size), bytes_written_(0) { | |
| } | |
| virtual bool Append(uint8_t* buf, size_t buf_size) override { | |
| if (bytes_written_ + buf_size > size_) { | |
| ALOGW("Zip: Unexpected size " ZD " (declared) vs " ZD " (actual)", | |
| size_, bytes_written_ + buf_size); | |
| return false; | |
| } | |
| memcpy(buf_ + bytes_written_, buf, buf_size); | |
| bytes_written_ += buf_size; | |
| return true; | |
| } | |
| private: | |
| uint8_t* const buf_; | |
| const size_t size_; | |
| size_t bytes_written_; | |
| }; | |
| // A Writer that appends data to a file |fd| at its current position. | |
| // The file will be truncated to the end of the written data. | |
| class FileWriter : public Writer { | |
| public: | |
| // Creates a FileWriter for |fd| and prepare to write |entry| to it, | |
| // guaranteeing that the file descriptor is valid and that there's enough | |
| // space on the volume to write out the entry completely and that the file | |
| // is truncated to the correct length. | |
| // | |
| // Returns a valid FileWriter on success, |nullptr| if an error occurred. | |
| static std::unique_ptr<FileWriter> Create(int fd, const ZipEntry* entry) { | |
| const uint32_t declared_length = entry->uncompressed_length; | |
| const off64_t current_offset = lseek64(fd, 0, SEEK_CUR); | |
| if (current_offset == -1) { | |
| ALOGW("Zip: unable to seek to current location on fd %d: %s", fd, strerror(errno)); | |
| return nullptr; | |
| } | |
| int result = 0; | |
| #if defined(__linux__) | |
| if (declared_length > 0) { | |
| // Make sure we have enough space on the volume to extract the compressed | |
| // entry. Note that the call to ftruncate below will change the file size but | |
| // will not allocate space on disk and this call to fallocate will not | |
| // change the file size. | |
| // Note: fallocate is only supported by the following filesystems - | |
| // btrfs, ext4, ocfs2, and xfs. Therefore fallocate might fail with | |
| // EOPNOTSUPP error when issued in other filesystems. | |
| // Hence, check for the return error code before concluding that the | |
| // disk does not have enough space. | |
| result = TEMP_FAILURE_RETRY(fallocate(fd, 0, current_offset, declared_length)); | |
| if (result == -1 && errno == ENOSPC) { | |
| ALOGW("Zip: unable to allocate space for file to %" PRId64 ": %s", | |
| static_cast<int64_t>(declared_length + current_offset), strerror(errno)); | |
| return std::unique_ptr<FileWriter>(nullptr); | |
| } | |
| } | |
| #endif // __linux__ | |
| result = TEMP_FAILURE_RETRY(ftruncate(fd, declared_length + current_offset)); | |
| if (result == -1) { | |
| ALOGW("Zip: unable to truncate file to %" PRId64 ": %s", | |
| static_cast<int64_t>(declared_length + current_offset), strerror(errno)); | |
| return std::unique_ptr<FileWriter>(nullptr); | |
| } | |
| return std::unique_ptr<FileWriter>(new FileWriter(fd, declared_length)); | |
| } | |
| virtual bool Append(uint8_t* buf, size_t buf_size) override { | |
| if (total_bytes_written_ + buf_size > declared_length_) { | |
| ALOGW("Zip: Unexpected size " ZD " (declared) vs " ZD " (actual)", | |
| declared_length_, total_bytes_written_ + buf_size); | |
| return false; | |
| } | |
| const bool result = android::base::WriteFully(fd_, buf, buf_size); | |
| if (result) { | |
| total_bytes_written_ += buf_size; | |
| } else { | |
| ALOGW("Zip: unable to write " ZD " bytes to file; %s", buf_size, strerror(errno)); | |
| } | |
| return result; | |
| } | |
| private: | |
| FileWriter(const int fd, const size_t declared_length) : | |
| Writer(), | |
| fd_(fd), | |
| declared_length_(declared_length), | |
| total_bytes_written_(0) { | |
| } | |
| const int fd_; | |
| const size_t declared_length_; | |
| size_t total_bytes_written_; | |
| }; | |
| // This method is using libz macros with old-style-casts | |
| #pragma GCC diagnostic push | |
| #pragma GCC diagnostic ignored "-Wold-style-cast" | |
| static inline int zlib_inflateInit2(z_stream* stream, int window_bits) { | |
| return inflateInit2(stream, window_bits); | |
| } | |
| #pragma GCC diagnostic pop | |
| static int32_t InflateEntryToWriter(int fd, const ZipEntry* entry, | |
| Writer* writer, uint64_t* crc_out) { | |
| const size_t kBufSize = 32768; | |
| std::vector<uint8_t> read_buf(kBufSize); | |
| std::vector<uint8_t> write_buf(kBufSize); | |
| z_stream zstream; | |
| int zerr; | |
| /* | |
| * Initialize the zlib stream struct. | |
| */ | |
| memset(&zstream, 0, sizeof(zstream)); | |
| zstream.zalloc = Z_NULL; | |
| zstream.zfree = Z_NULL; | |
| zstream.opaque = Z_NULL; | |
| zstream.next_in = NULL; | |
| zstream.avail_in = 0; | |
| zstream.next_out = &write_buf[0]; | |
| zstream.avail_out = kBufSize; | |
| zstream.data_type = Z_UNKNOWN; | |
| /* | |
| * Use the undocumented "negative window bits" feature to tell zlib | |
| * that there's no zlib header waiting for it. | |
| */ | |
| zerr = zlib_inflateInit2(&zstream, -MAX_WBITS); | |
| if (zerr != Z_OK) { | |
| if (zerr == Z_VERSION_ERROR) { | |
| ALOGE("Installed zlib is not compatible with linked version (%s)", | |
| ZLIB_VERSION); | |
| } else { | |
| ALOGW("Call to inflateInit2 failed (zerr=%d)", zerr); | |
| } | |
| return kZlibError; | |
| } | |
| auto zstream_deleter = [](z_stream* stream) { | |
| inflateEnd(stream); /* free up any allocated structures */ | |
| }; | |
| std::unique_ptr<z_stream, decltype(zstream_deleter)> zstream_guard(&zstream, zstream_deleter); | |
| const uint32_t uncompressed_length = entry->uncompressed_length; | |
| uint32_t compressed_length = entry->compressed_length; | |
| do { | |
| /* read as much as we can */ | |
| if (zstream.avail_in == 0) { | |
| const ZD_TYPE getSize = (compressed_length > kBufSize) ? kBufSize : compressed_length; | |
| const ZD_TYPE actual = TEMP_FAILURE_RETRY(read(fd, &read_buf[0], getSize)); | |
| if (actual != getSize) { | |
| ALOGW("Zip: inflate read failed (" ZD " vs " ZD ")", actual, getSize); | |
| return kIoError; | |
| } | |
| compressed_length -= getSize; | |
| zstream.next_in = &read_buf[0]; | |
| zstream.avail_in = getSize; | |
| } | |
| /* uncompress the data */ | |
| zerr = inflate(&zstream, Z_NO_FLUSH); | |
| if (zerr != Z_OK && zerr != Z_STREAM_END) { | |
| ALOGW("Zip: inflate zerr=%d (nIn=%p aIn=%u nOut=%p aOut=%u)", | |
| zerr, zstream.next_in, zstream.avail_in, | |
| zstream.next_out, zstream.avail_out); | |
| return kZlibError; | |
| } | |
| /* write when we're full or when we're done */ | |
| if (zstream.avail_out == 0 || | |
| (zerr == Z_STREAM_END && zstream.avail_out != kBufSize)) { | |
| const size_t write_size = zstream.next_out - &write_buf[0]; | |
| if (!writer->Append(&write_buf[0], write_size)) { | |
| // The file might have declared a bogus length. | |
| return kInconsistentInformation; | |
| } | |
| zstream.next_out = &write_buf[0]; | |
| zstream.avail_out = kBufSize; | |
| } | |
| } while (zerr == Z_OK); | |
| assert(zerr == Z_STREAM_END); /* other errors should've been caught */ | |
| // stream.adler holds the crc32 value for such streams. | |
| *crc_out = zstream.adler; | |
| if (zstream.total_out != uncompressed_length || compressed_length != 0) { | |
| ALOGW("Zip: size mismatch on inflated file (%lu vs %" PRIu32 ")", | |
| zstream.total_out, uncompressed_length); | |
| return kInconsistentInformation; | |
| } | |
| return 0; | |
| } | |
| static int32_t CopyEntryToWriter(int fd, const ZipEntry* entry, Writer* writer, | |
| uint64_t *crc_out) { | |
| static const uint32_t kBufSize = 32768; | |
| std::vector<uint8_t> buf(kBufSize); | |
| const uint32_t length = entry->uncompressed_length; | |
| uint32_t count = 0; | |
| uint64_t crc = 0; | |
| while (count < length) { | |
| uint32_t remaining = length - count; | |
| // Safe conversion because kBufSize is narrow enough for a 32 bit signed | |
| // value. | |
| const ssize_t block_size = (remaining > kBufSize) ? kBufSize : remaining; | |
| const ssize_t actual = TEMP_FAILURE_RETRY(read(fd, &buf[0], block_size)); | |
| if (actual != block_size) { | |
| ALOGW("CopyFileToFile: copy read failed (" ZD " vs " ZD ")", actual, block_size); | |
| return kIoError; | |
| } | |
| if (!writer->Append(&buf[0], block_size)) { | |
| return kIoError; | |
| } | |
| crc = crc32(crc, &buf[0], block_size); | |
| count += block_size; | |
| } | |
| *crc_out = crc; | |
| return 0; | |
| } | |
| int32_t ExtractToWriter(ZipArchiveHandle handle, | |
| ZipEntry* entry, Writer* writer) { | |
| ZipArchive* archive = reinterpret_cast<ZipArchive*>(handle); | |
| const uint16_t method = entry->method; | |
| off64_t data_offset = entry->offset; | |
| if (lseek64(archive->fd, data_offset, SEEK_SET) != data_offset) { | |
| ALOGW("Zip: lseek to data at %" PRId64 " failed", static_cast<int64_t>(data_offset)); | |
| return kIoError; | |
| } | |
| // this should default to kUnknownCompressionMethod. | |
| int32_t return_value = -1; | |
| uint64_t crc = 0; | |
| if (method == kCompressStored) { | |
| return_value = CopyEntryToWriter(archive->fd, entry, writer, &crc); | |
| } else if (method == kCompressDeflated) { | |
| return_value = InflateEntryToWriter(archive->fd, entry, writer, &crc); | |
| } | |
| if (!return_value && entry->has_data_descriptor) { | |
| return_value = UpdateEntryFromDataDescriptor(archive->fd, entry); | |
| if (return_value) { | |
| return return_value; | |
| } | |
| } | |
| // TODO: Fix this check by passing the right flags to inflate2 so that | |
| // it calculates the CRC for us. | |
| if (entry->crc32 != crc && false) { | |
| ALOGW("Zip: crc mismatch: expected %" PRIu32 ", was %" PRIu64, entry->crc32, crc); | |
| return kInconsistentInformation; | |
| } | |
| return return_value; | |
| } | |
| int32_t ExtractToMemory(ZipArchiveHandle handle, ZipEntry* entry, | |
| uint8_t* begin, uint32_t size) { | |
| std::unique_ptr<Writer> writer(new MemoryWriter(begin, size)); | |
| return ExtractToWriter(handle, entry, writer.get()); | |
| } | |
| int32_t ExtractEntryToFile(ZipArchiveHandle handle, | |
| ZipEntry* entry, int fd) { | |
| std::unique_ptr<Writer> writer(FileWriter::Create(fd, entry)); | |
| if (writer.get() == nullptr) { | |
| return kIoError; | |
| } | |
| return ExtractToWriter(handle, entry, writer.get()); | |
| } | |
| const char* ErrorCodeString(int32_t error_code) { | |
| if (error_code > kErrorMessageLowerBound && error_code < kErrorMessageUpperBound) { | |
| return kErrorMessages[error_code * -1]; | |
| } | |
| return kErrorMessages[0]; | |
| } | |
| int GetFileDescriptor(const ZipArchiveHandle handle) { | |
| return reinterpret_cast<ZipArchive*>(handle)->fd; | |
| } |