| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
| * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT |
| * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| */ |
| |
| #include <ctype.h> |
| #include <dirent.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <pthread.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/ioctl.h> |
| #include <sys/stat.h> |
| #include <sys/types.h> |
| #include <unistd.h> |
| |
| #include <linux/usbdevice_fs.h> |
| #include <linux/version.h> |
| #include <linux/usb/ch9.h> |
| |
| #include <memory> |
| |
| #include "fastboot.h" |
| #include "usb.h" |
| |
| #define MAX_RETRIES 5 |
| |
| /* Timeout in seconds for usb_wait_for_disconnect. |
| * It doesn't usually take long for a device to disconnect (almost always |
| * under 2 seconds) but we'll time out after 3 seconds just in case. |
| */ |
| #define WAIT_FOR_DISCONNECT_TIMEOUT 3 |
| |
| #ifdef TRACE_USB |
| #define DBG1(x...) fprintf(stderr, x) |
| #define DBG(x...) fprintf(stderr, x) |
| #else |
| #define DBG(x...) |
| #define DBG1(x...) |
| #endif |
| |
| // Kernels before 3.3 have a 16KiB transfer limit. That limit was replaced |
| // with a 16MiB global limit in 3.3, but each URB submitted required a |
| // contiguous kernel allocation, so you would get ENOMEM if you tried to |
| // send something larger than the biggest available contiguous kernel |
| // memory region. 256KiB contiguous allocations are generally not reliable |
| // on a device kernel that has been running for a while fragmenting its |
| // memory, but that shouldn't be a problem for fastboot on the host. |
| // In 3.6, the contiguous buffer limit was removed by allocating multiple |
| // 16KiB chunks and having the USB driver stitch them back together while |
| // transmitting using a scatter-gather list, so 256KiB bulk transfers should |
| // be reliable. |
| // 256KiB seems to work, but 1MiB bulk transfers lock up my z620 with a 3.13 |
| // kernel. |
| #define MAX_USBFS_BULK_SIZE (16 * 1024) |
| |
| struct usb_handle |
| { |
| char fname[64]; |
| int desc; |
| unsigned char ep_in; |
| unsigned char ep_out; |
| }; |
| |
| class LinuxUsbTransport : public Transport { |
| public: |
| LinuxUsbTransport(std::unique_ptr<usb_handle> handle) : handle_(std::move(handle)) {} |
| ~LinuxUsbTransport() override = default; |
| |
| ssize_t Read(void* data, size_t len) override; |
| ssize_t Write(const void* data, size_t len) override; |
| int Close() override; |
| int WaitForDisconnect() override; |
| |
| private: |
| std::unique_ptr<usb_handle> handle_; |
| |
| DISALLOW_COPY_AND_ASSIGN(LinuxUsbTransport); |
| }; |
| |
| /* True if name isn't a valid name for a USB device in /sys/bus/usb/devices. |
| * Device names are made up of numbers, dots, and dashes, e.g., '7-1.5'. |
| * We reject interfaces (e.g., '7-1.5:1.0') and host controllers (e.g. 'usb1'). |
| * The name must also start with a digit, to disallow '.' and '..' |
| */ |
| static inline int badname(const char *name) |
| { |
| if (!isdigit(*name)) |
| return 1; |
| while(*++name) { |
| if(!isdigit(*name) && *name != '.' && *name != '-') |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int check(void *_desc, int len, unsigned type, int size) |
| { |
| struct usb_descriptor_header *hdr = (struct usb_descriptor_header *)_desc; |
| |
| if(len < size) return -1; |
| if(hdr->bLength < size) return -1; |
| if(hdr->bLength > len) return -1; |
| if(hdr->bDescriptorType != type) return -1; |
| |
| return 0; |
| } |
| |
| static int filter_usb_device(char* sysfs_name, |
| char *ptr, int len, int writable, |
| ifc_match_func callback, |
| int *ept_in_id, int *ept_out_id, int *ifc_id) |
| { |
| struct usb_device_descriptor *dev; |
| struct usb_config_descriptor *cfg; |
| struct usb_interface_descriptor *ifc; |
| struct usb_endpoint_descriptor *ept; |
| struct usb_ifc_info info; |
| |
| int in, out; |
| unsigned i; |
| unsigned e; |
| |
| if (check(ptr, len, USB_DT_DEVICE, USB_DT_DEVICE_SIZE)) |
| return -1; |
| dev = (struct usb_device_descriptor *)ptr; |
| len -= dev->bLength; |
| ptr += dev->bLength; |
| |
| if (check(ptr, len, USB_DT_CONFIG, USB_DT_CONFIG_SIZE)) |
| return -1; |
| cfg = (struct usb_config_descriptor *)ptr; |
| len -= cfg->bLength; |
| ptr += cfg->bLength; |
| |
| info.dev_vendor = dev->idVendor; |
| info.dev_product = dev->idProduct; |
| info.dev_class = dev->bDeviceClass; |
| info.dev_subclass = dev->bDeviceSubClass; |
| info.dev_protocol = dev->bDeviceProtocol; |
| info.writable = writable; |
| |
| snprintf(info.device_path, sizeof(info.device_path), "usb:%s", sysfs_name); |
| |
| /* Read device serial number (if there is one). |
| * We read the serial number from sysfs, since it's faster and more |
| * reliable than issuing a control pipe read, and also won't |
| * cause problems for devices which don't like getting descriptor |
| * requests while they're in the middle of flashing. |
| */ |
| info.serial_number[0] = '\0'; |
| if (dev->iSerialNumber) { |
| char path[80]; |
| int fd; |
| |
| snprintf(path, sizeof(path), |
| "/sys/bus/usb/devices/%s/serial", sysfs_name); |
| path[sizeof(path) - 1] = '\0'; |
| |
| fd = open(path, O_RDONLY); |
| if (fd >= 0) { |
| int chars_read = read(fd, info.serial_number, |
| sizeof(info.serial_number) - 1); |
| close(fd); |
| |
| if (chars_read <= 0) |
| info.serial_number[0] = '\0'; |
| else if (info.serial_number[chars_read - 1] == '\n') { |
| // strip trailing newline |
| info.serial_number[chars_read - 1] = '\0'; |
| } |
| } |
| } |
| |
| for(i = 0; i < cfg->bNumInterfaces; i++) { |
| |
| while (len > 0) { |
| struct usb_descriptor_header *hdr = (struct usb_descriptor_header *)ptr; |
| if (check(hdr, len, USB_DT_INTERFACE, USB_DT_INTERFACE_SIZE) == 0) |
| break; |
| len -= hdr->bLength; |
| ptr += hdr->bLength; |
| } |
| |
| if (len <= 0) |
| return -1; |
| |
| ifc = (struct usb_interface_descriptor *)ptr; |
| len -= ifc->bLength; |
| ptr += ifc->bLength; |
| |
| in = -1; |
| out = -1; |
| info.ifc_class = ifc->bInterfaceClass; |
| info.ifc_subclass = ifc->bInterfaceSubClass; |
| info.ifc_protocol = ifc->bInterfaceProtocol; |
| |
| for(e = 0; e < ifc->bNumEndpoints; e++) { |
| while (len > 0) { |
| struct usb_descriptor_header *hdr = (struct usb_descriptor_header *)ptr; |
| if (check(hdr, len, USB_DT_ENDPOINT, USB_DT_ENDPOINT_SIZE) == 0) |
| break; |
| len -= hdr->bLength; |
| ptr += hdr->bLength; |
| } |
| if (len < 0) { |
| break; |
| } |
| |
| ept = (struct usb_endpoint_descriptor *)ptr; |
| len -= ept->bLength; |
| ptr += ept->bLength; |
| |
| if((ept->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) |
| continue; |
| |
| if(ept->bEndpointAddress & USB_ENDPOINT_DIR_MASK) { |
| in = ept->bEndpointAddress; |
| } else { |
| out = ept->bEndpointAddress; |
| } |
| |
| // For USB 3.0 devices skip the SS Endpoint Companion descriptor |
| if (check((struct usb_descriptor_hdr *)ptr, len, |
| USB_DT_SS_ENDPOINT_COMP, USB_DT_SS_EP_COMP_SIZE) == 0) { |
| len -= USB_DT_SS_EP_COMP_SIZE; |
| ptr += USB_DT_SS_EP_COMP_SIZE; |
| } |
| } |
| |
| info.has_bulk_in = (in != -1); |
| info.has_bulk_out = (out != -1); |
| |
| if(callback(&info) == 0) { |
| *ept_in_id = in; |
| *ept_out_id = out; |
| *ifc_id = ifc->bInterfaceNumber; |
| return 0; |
| } |
| } |
| |
| return -1; |
| } |
| |
| static int read_sysfs_string(const char *sysfs_name, const char *sysfs_node, |
| char* buf, int bufsize) |
| { |
| char path[80]; |
| int fd, n; |
| |
| snprintf(path, sizeof(path), |
| "/sys/bus/usb/devices/%s/%s", sysfs_name, sysfs_node); |
| path[sizeof(path) - 1] = '\0'; |
| |
| fd = open(path, O_RDONLY); |
| if (fd < 0) |
| return -1; |
| |
| n = read(fd, buf, bufsize - 1); |
| close(fd); |
| |
| if (n < 0) |
| return -1; |
| |
| buf[n] = '\0'; |
| |
| return n; |
| } |
| |
| static int read_sysfs_number(const char *sysfs_name, const char *sysfs_node) |
| { |
| char buf[16]; |
| int value; |
| |
| if (read_sysfs_string(sysfs_name, sysfs_node, buf, sizeof(buf)) < 0) |
| return -1; |
| |
| if (sscanf(buf, "%d", &value) != 1) |
| return -1; |
| |
| return value; |
| } |
| |
| /* Given the name of a USB device in sysfs, get the name for the same |
| * device in devfs. Returns 0 for success, -1 for failure. |
| */ |
| static int convert_to_devfs_name(const char* sysfs_name, |
| char* devname, int devname_size) |
| { |
| int busnum, devnum; |
| |
| busnum = read_sysfs_number(sysfs_name, "busnum"); |
| if (busnum < 0) |
| return -1; |
| |
| devnum = read_sysfs_number(sysfs_name, "devnum"); |
| if (devnum < 0) |
| return -1; |
| |
| snprintf(devname, devname_size, "/dev/bus/usb/%03d/%03d", busnum, devnum); |
| return 0; |
| } |
| |
| static std::unique_ptr<usb_handle> find_usb_device(const char* base, ifc_match_func callback) |
| { |
| std::unique_ptr<usb_handle> usb; |
| char devname[64]; |
| char desc[1024]; |
| int n, in, out, ifc; |
| |
| DIR *busdir; |
| struct dirent *de; |
| int fd; |
| int writable; |
| |
| busdir = opendir(base); |
| if (busdir == 0) return 0; |
| |
| while ((de = readdir(busdir)) && (usb == nullptr)) { |
| if (badname(de->d_name)) continue; |
| |
| if (!convert_to_devfs_name(de->d_name, devname, sizeof(devname))) { |
| |
| // DBG("[ scanning %s ]\n", devname); |
| writable = 1; |
| if ((fd = open(devname, O_RDWR)) < 0) { |
| // Check if we have read-only access, so we can give a helpful |
| // diagnostic like "adb devices" does. |
| writable = 0; |
| if ((fd = open(devname, O_RDONLY)) < 0) { |
| continue; |
| } |
| } |
| |
| n = read(fd, desc, sizeof(desc)); |
| |
| if (filter_usb_device(de->d_name, desc, n, writable, callback, &in, &out, &ifc) == 0) { |
| usb.reset(new usb_handle()); |
| strcpy(usb->fname, devname); |
| usb->ep_in = in; |
| usb->ep_out = out; |
| usb->desc = fd; |
| |
| n = ioctl(fd, USBDEVFS_CLAIMINTERFACE, &ifc); |
| if (n != 0) { |
| close(fd); |
| usb.reset(); |
| continue; |
| } |
| } else { |
| close(fd); |
| } |
| } |
| } |
| closedir(busdir); |
| |
| return usb; |
| } |
| |
| ssize_t LinuxUsbTransport::Write(const void* _data, size_t len) |
| { |
| unsigned char *data = (unsigned char*) _data; |
| unsigned count = 0; |
| struct usbdevfs_bulktransfer bulk; |
| int n; |
| |
| if (handle_->ep_out == 0 || handle_->desc == -1) { |
| return -1; |
| } |
| |
| do { |
| int xfer; |
| xfer = (len > MAX_USBFS_BULK_SIZE) ? MAX_USBFS_BULK_SIZE : len; |
| |
| bulk.ep = handle_->ep_out; |
| bulk.len = xfer; |
| bulk.data = data; |
| bulk.timeout = 0; |
| |
| n = ioctl(handle_->desc, USBDEVFS_BULK, &bulk); |
| if(n != xfer) { |
| DBG("ERROR: n = %d, errno = %d (%s)\n", |
| n, errno, strerror(errno)); |
| return -1; |
| } |
| |
| count += xfer; |
| len -= xfer; |
| data += xfer; |
| } while(len > 0); |
| |
| return count; |
| } |
| |
| ssize_t LinuxUsbTransport::Read(void* _data, size_t len) |
| { |
| unsigned char *data = (unsigned char*) _data; |
| unsigned count = 0; |
| struct usbdevfs_bulktransfer bulk; |
| int n, retry; |
| |
| if (handle_->ep_in == 0 || handle_->desc == -1) { |
| return -1; |
| } |
| |
| while(len > 0) { |
| int xfer = (len > MAX_USBFS_BULK_SIZE) ? MAX_USBFS_BULK_SIZE : len; |
| |
| bulk.ep = handle_->ep_in; |
| bulk.len = xfer; |
| bulk.data = data; |
| bulk.timeout = 0; |
| retry = 0; |
| |
| do{ |
| DBG("[ usb read %d fd = %d], fname=%s\n", xfer, handle_->desc, handle_->fname); |
| n = ioctl(handle_->desc, USBDEVFS_BULK, &bulk); |
| DBG("[ usb read %d ] = %d, fname=%s, Retry %d \n", xfer, n, handle_->fname, retry); |
| |
| if( n < 0 ) { |
| DBG1("ERROR: n = %d, errno = %d (%s)\n",n, errno, strerror(errno)); |
| if ( ++retry > MAX_RETRIES ) return -1; |
| sleep( 1 ); |
| } |
| } |
| while( n < 0 ); |
| |
| count += n; |
| len -= n; |
| data += n; |
| |
| if(n < xfer) { |
| break; |
| } |
| } |
| |
| return count; |
| } |
| |
| int LinuxUsbTransport::Close() |
| { |
| int fd; |
| |
| fd = handle_->desc; |
| handle_->desc = -1; |
| if(fd >= 0) { |
| close(fd); |
| DBG("[ usb closed %d ]\n", fd); |
| } |
| |
| return 0; |
| } |
| |
| Transport* usb_open(ifc_match_func callback) |
| { |
| std::unique_ptr<usb_handle> handle = find_usb_device("/sys/bus/usb/devices", callback); |
| return handle ? new LinuxUsbTransport(std::move(handle)) : nullptr; |
| } |
| |
| /* Wait for the system to notice the device is gone, so that a subsequent |
| * fastboot command won't try to access the device before it's rebooted. |
| * Returns 0 for success, -1 for timeout. |
| */ |
| int LinuxUsbTransport::WaitForDisconnect() |
| { |
| double deadline = now() + WAIT_FOR_DISCONNECT_TIMEOUT; |
| while (now() < deadline) { |
| if (access(handle_->fname, F_OK)) |
| return 0; |
| usleep(50000); |
| } |
| return -1; |
| } |