| /* | |
| * Copyright (C) 2008 The Android Open Source Project | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); | |
| * you may not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| /* | |
| * Read-only access to Zip archives, with minimal heap allocation. | |
| */ | |
| #include <assert.h> | |
| #include <errno.h> | |
| #include <fcntl.h> | |
| #include <inttypes.h> | |
| #include <limits.h> | |
| #include <log/log.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <unistd.h> | |
| #include <utils/Compat.h> | |
| #include <utils/FileMap.h> | |
| #include <zlib.h> | |
| #include <JNIHelp.h> // TEMP_FAILURE_RETRY may or may not be in unistd | |
| #include "ziparchive/zip_archive.h" | |
| // This is for windows. If we don't open a file in binary mode, weird | |
| // things will happen. | |
| #ifndef O_BINARY | |
| #define O_BINARY 0 | |
| #endif | |
| #define DISALLOW_IMPLICIT_CONSTRUCTORS(TypeName) \ | |
| TypeName(); \ | |
| TypeName(const TypeName&); \ | |
| void operator=(const TypeName&) | |
| // The "end of central directory" (EOCD) record. Each archive | |
| // contains exactly once such record which appears at the end of | |
| // the archive. It contains archive wide information like the | |
| // number of entries in the archive and the offset to the central | |
| // directory of the offset. | |
| struct EocdRecord { | |
| static const uint32_t kSignature = 0x06054b50; | |
| // End of central directory signature, should always be | |
| // |kSignature|. | |
| uint32_t eocd_signature; | |
| // The number of the current "disk", i.e, the "disk" that this | |
| // central directory is on. | |
| // | |
| // This implementation assumes that each archive spans a single | |
| // disk only. i.e, that disk_num == 1. | |
| uint16_t disk_num; | |
| // The disk where the central directory starts. | |
| // | |
| // This implementation assumes that each archive spans a single | |
| // disk only. i.e, that cd_start_disk == 1. | |
| uint16_t cd_start_disk; | |
| // The number of central directory records on this disk. | |
| // | |
| // This implementation assumes that each archive spans a single | |
| // disk only. i.e, that num_records_on_disk == num_records. | |
| uint16_t num_records_on_disk; | |
| // The total number of central directory records. | |
| uint16_t num_records; | |
| // The size of the central directory (in bytes). | |
| uint32_t cd_size; | |
| // The offset of the start of the central directory, relative | |
| // to the start of the file. | |
| uint32_t cd_start_offset; | |
| // Length of the central directory comment. | |
| uint16_t comment_length; | |
| private: | |
| DISALLOW_IMPLICIT_CONSTRUCTORS(EocdRecord); | |
| } __attribute__((packed)); | |
| // A structure representing the fixed length fields for a single | |
| // record in the central directory of the archive. In addition to | |
| // the fixed length fields listed here, each central directory | |
| // record contains a variable length "file_name" and "extra_field" | |
| // whose lengths are given by |file_name_length| and |extra_field_length| | |
| // respectively. | |
| struct CentralDirectoryRecord { | |
| static const uint32_t kSignature = 0x02014b50; | |
| // The start of record signature. Must be |kSignature|. | |
| uint32_t record_signature; | |
| // Tool version. Ignored by this implementation. | |
| uint16_t version_made_by; | |
| // Tool version. Ignored by this implementation. | |
| uint16_t version_needed; | |
| // The "general purpose bit flags" for this entry. The only | |
| // flag value that we currently check for is the "data descriptor" | |
| // flag. | |
| uint16_t gpb_flags; | |
| // The compression method for this entry, one of |kCompressStored| | |
| // and |kCompressDeflated|. | |
| uint16_t compression_method; | |
| // The file modification time and date for this entry. | |
| uint16_t last_mod_time; | |
| uint16_t last_mod_date; | |
| // The CRC-32 checksum for this entry. | |
| uint32_t crc32; | |
| // The compressed size (in bytes) of this entry. | |
| uint32_t compressed_size; | |
| // The uncompressed size (in bytes) of this entry. | |
| uint32_t uncompressed_size; | |
| // The length of the entry file name in bytes. The file name | |
| // will appear immediately after this record. | |
| uint16_t file_name_length; | |
| // The length of the extra field info (in bytes). This data | |
| // will appear immediately after the entry file name. | |
| uint16_t extra_field_length; | |
| // The length of the entry comment (in bytes). This data will | |
| // appear immediately after the extra field. | |
| uint16_t comment_length; | |
| // The start disk for this entry. Ignored by this implementation). | |
| uint16_t file_start_disk; | |
| // File attributes. Ignored by this implementation. | |
| uint16_t internal_file_attributes; | |
| // File attributes. Ignored by this implementation. | |
| uint32_t external_file_attributes; | |
| // The offset to the local file header for this entry, from the | |
| // beginning of this archive. | |
| uint32_t local_file_header_offset; | |
| private: | |
| DISALLOW_IMPLICIT_CONSTRUCTORS(CentralDirectoryRecord); | |
| } __attribute__((packed)); | |
| // The local file header for a given entry. This duplicates information | |
| // present in the central directory of the archive. It is an error for | |
| // the information here to be different from the central directory | |
| // information for a given entry. | |
| struct LocalFileHeader { | |
| static const uint32_t kSignature = 0x04034b50; | |
| // The local file header signature, must be |kSignature|. | |
| uint32_t lfh_signature; | |
| // Tool version. Ignored by this implementation. | |
| uint16_t version_needed; | |
| // The "general purpose bit flags" for this entry. The only | |
| // flag value that we currently check for is the "data descriptor" | |
| // flag. | |
| uint16_t gpb_flags; | |
| // The compression method for this entry, one of |kCompressStored| | |
| // and |kCompressDeflated|. | |
| uint16_t compression_method; | |
| // The file modification time and date for this entry. | |
| uint16_t last_mod_time; | |
| uint16_t last_mod_date; | |
| // The CRC-32 checksum for this entry. | |
| uint32_t crc32; | |
| // The compressed size (in bytes) of this entry. | |
| uint32_t compressed_size; | |
| // The uncompressed size (in bytes) of this entry. | |
| uint32_t uncompressed_size; | |
| // The length of the entry file name in bytes. The file name | |
| // will appear immediately after this record. | |
| uint16_t file_name_length; | |
| // The length of the extra field info (in bytes). This data | |
| // will appear immediately after the entry file name. | |
| uint16_t extra_field_length; | |
| private: | |
| DISALLOW_IMPLICIT_CONSTRUCTORS(LocalFileHeader); | |
| } __attribute__((packed)); | |
| struct DataDescriptor { | |
| // The *optional* data descriptor start signature. | |
| static const uint32_t kOptSignature = 0x08074b50; | |
| // CRC-32 checksum of the entry. | |
| uint32_t crc32; | |
| // Compressed size of the entry. | |
| uint32_t compressed_size; | |
| // Uncompressed size of the entry. | |
| uint32_t uncompressed_size; | |
| private: | |
| DISALLOW_IMPLICIT_CONSTRUCTORS(DataDescriptor); | |
| } __attribute__((packed)); | |
| #undef DISALLOW_IMPLICIT_CONSTRUCTORS | |
| static const uint32_t kGPBDDFlagMask = 0x0008; // mask value that signifies that the entry has a DD | |
| static const uint32_t kMaxErrorLen = 1024; | |
| // The maximum size of a central directory or a file | |
| // comment in bytes. | |
| static const uint32_t kMaxCommentLen = 65535; | |
| // The maximum number of bytes to scan backwards for the EOCD start. | |
| static const uint32_t kMaxEOCDSearch = kMaxCommentLen + sizeof(EocdRecord); | |
| static const char* kErrorMessages[] = { | |
| "Unknown return code.", | |
| "Iteration ended", | |
| "Zlib error", | |
| "Invalid file", | |
| "Invalid handle", | |
| "Duplicate entries in archive", | |
| "Empty archive", | |
| "Entry not found", | |
| "Invalid offset", | |
| "Inconsistent information", | |
| "Invalid entry name", | |
| "I/O Error", | |
| "File mapping failed" | |
| }; | |
| static const int32_t kErrorMessageUpperBound = 0; | |
| static const int32_t kIterationEnd = -1; | |
| // We encountered a Zlib error when inflating a stream from this file. | |
| // Usually indicates file corruption. | |
| static const int32_t kZlibError = -2; | |
| // The input file cannot be processed as a zip archive. Usually because | |
| // it's too small, too large or does not have a valid signature. | |
| static const int32_t kInvalidFile = -3; | |
| // An invalid iteration / ziparchive handle was passed in as an input | |
| // argument. | |
| static const int32_t kInvalidHandle = -4; | |
| // The zip archive contained two (or possibly more) entries with the same | |
| // name. | |
| static const int32_t kDuplicateEntry = -5; | |
| // The zip archive contains no entries. | |
| static const int32_t kEmptyArchive = -6; | |
| // The specified entry was not found in the archive. | |
| static const int32_t kEntryNotFound = -7; | |
| // The zip archive contained an invalid local file header pointer. | |
| static const int32_t kInvalidOffset = -8; | |
| // The zip archive contained inconsistent entry information. This could | |
| // be because the central directory & local file header did not agree, or | |
| // if the actual uncompressed length or crc32 do not match their declared | |
| // values. | |
| static const int32_t kInconsistentInformation = -9; | |
| // An invalid entry name was encountered. | |
| static const int32_t kInvalidEntryName = -10; | |
| // An I/O related system call (read, lseek, ftruncate, map) failed. | |
| static const int32_t kIoError = -11; | |
| // We were not able to mmap the central directory or entry contents. | |
| static const int32_t kMmapFailed = -12; | |
| static const int32_t kErrorMessageLowerBound = -13; | |
| static const char kTempMappingFileName[] = "zip: ExtractFileToFile"; | |
| /* | |
| * A Read-only Zip archive. | |
| * | |
| * We want "open" and "find entry by name" to be fast operations, and | |
| * we want to use as little memory as possible. We memory-map the zip | |
| * central directory, and load a hash table with pointers to the filenames | |
| * (which aren't null-terminated). The other fields are at a fixed offset | |
| * from the filename, so we don't need to extract those (but we do need | |
| * to byte-read and endian-swap them every time we want them). | |
| * | |
| * It's possible that somebody has handed us a massive (~1GB) zip archive, | |
| * so we can't expect to mmap the entire file. | |
| * | |
| * To speed comparisons when doing a lookup by name, we could make the mapping | |
| * "private" (copy-on-write) and null-terminate the filenames after verifying | |
| * the record structure. However, this requires a private mapping of | |
| * every page that the Central Directory touches. Easier to tuck a copy | |
| * of the string length into the hash table entry. | |
| */ | |
| struct ZipArchive { | |
| /* open Zip archive */ | |
| const int fd; | |
| /* mapped central directory area */ | |
| off64_t directory_offset; | |
| android::FileMap* directory_map; | |
| /* number of entries in the Zip archive */ | |
| uint16_t num_entries; | |
| /* | |
| * We know how many entries are in the Zip archive, so we can have a | |
| * fixed-size hash table. We define a load factor of 0.75 and overallocat | |
| * so the maximum number entries can never be higher than | |
| * ((4 * UINT16_MAX) / 3 + 1) which can safely fit into a uint32_t. | |
| */ | |
| uint32_t hash_table_size; | |
| ZipEntryName* hash_table; | |
| ZipArchive(const int fd) : | |
| fd(fd), | |
| directory_offset(0), | |
| directory_map(NULL), | |
| num_entries(0), | |
| hash_table_size(0), | |
| hash_table(NULL) {} | |
| ~ZipArchive() { | |
| if (fd >= 0) { | |
| close(fd); | |
| } | |
| if (directory_map != NULL) { | |
| directory_map->release(); | |
| } | |
| free(hash_table); | |
| } | |
| }; | |
| // Returns 0 on success and negative values on failure. | |
| static android::FileMap* MapFileSegment(const int fd, const off64_t start, | |
| const size_t length, const bool read_only, | |
| const char* debug_file_name) { | |
| android::FileMap* file_map = new android::FileMap; | |
| const bool success = file_map->create(debug_file_name, fd, start, length, read_only); | |
| if (!success) { | |
| file_map->release(); | |
| return NULL; | |
| } | |
| return file_map; | |
| } | |
| static int32_t CopyFileToFile(int fd, uint8_t* begin, const uint32_t length, uint64_t *crc_out) { | |
| static const uint32_t kBufSize = 32768; | |
| uint8_t buf[kBufSize]; | |
| uint32_t count = 0; | |
| uint64_t crc = 0; | |
| while (count < length) { | |
| uint32_t remaining = length - count; | |
| // Safe conversion because kBufSize is narrow enough for a 32 bit signed | |
| // value. | |
| ssize_t get_size = (remaining > kBufSize) ? kBufSize : remaining; | |
| ssize_t actual = TEMP_FAILURE_RETRY(read(fd, buf, get_size)); | |
| if (actual != get_size) { | |
| ALOGW("CopyFileToFile: copy read failed (" ZD " vs " ZD ")", actual, get_size); | |
| return kIoError; | |
| } | |
| memcpy(begin + count, buf, get_size); | |
| crc = crc32(crc, buf, get_size); | |
| count += get_size; | |
| } | |
| *crc_out = crc; | |
| return 0; | |
| } | |
| /* | |
| * Round up to the next highest power of 2. | |
| * | |
| * Found on http://graphics.stanford.edu/~seander/bithacks.html. | |
| */ | |
| static uint32_t RoundUpPower2(uint32_t val) { | |
| val--; | |
| val |= val >> 1; | |
| val |= val >> 2; | |
| val |= val >> 4; | |
| val |= val >> 8; | |
| val |= val >> 16; | |
| val++; | |
| return val; | |
| } | |
| static uint32_t ComputeHash(const char* str, uint16_t len) { | |
| uint32_t hash = 0; | |
| while (len--) { | |
| hash = hash * 31 + *str++; | |
| } | |
| return hash; | |
| } | |
| /* | |
| * Convert a ZipEntry to a hash table index, verifying that it's in a | |
| * valid range. | |
| */ | |
| static int64_t EntryToIndex(const ZipEntryName* hash_table, | |
| const uint32_t hash_table_size, | |
| const char* name, uint16_t length) { | |
| const uint32_t hash = ComputeHash(name, length); | |
| // NOTE: (hash_table_size - 1) is guaranteed to be non-negative. | |
| uint32_t ent = hash & (hash_table_size - 1); | |
| while (hash_table[ent].name != NULL) { | |
| if (hash_table[ent].name_length == length && | |
| memcmp(hash_table[ent].name, name, length) == 0) { | |
| return ent; | |
| } | |
| ent = (ent + 1) & (hash_table_size - 1); | |
| } | |
| ALOGV("Zip: Unable to find entry %.*s", length, name); | |
| return kEntryNotFound; | |
| } | |
| /* | |
| * Add a new entry to the hash table. | |
| */ | |
| static int32_t AddToHash(ZipEntryName *hash_table, const uint64_t hash_table_size, | |
| const char* name, uint16_t length) { | |
| const uint64_t hash = ComputeHash(name, length); | |
| uint32_t ent = hash & (hash_table_size - 1); | |
| /* | |
| * We over-allocated the table, so we're guaranteed to find an empty slot. | |
| * Further, we guarantee that the hashtable size is not 0. | |
| */ | |
| while (hash_table[ent].name != NULL) { | |
| if (hash_table[ent].name_length == length && | |
| memcmp(hash_table[ent].name, name, length) == 0) { | |
| // We've found a duplicate entry. We don't accept it | |
| ALOGW("Zip: Found duplicate entry %.*s", length, name); | |
| return kDuplicateEntry; | |
| } | |
| ent = (ent + 1) & (hash_table_size - 1); | |
| } | |
| hash_table[ent].name = name; | |
| hash_table[ent].name_length = length; | |
| return 0; | |
| } | |
| static int32_t MapCentralDirectory0(int fd, const char* debug_file_name, | |
| ZipArchive* archive, off64_t file_length, | |
| off64_t read_amount, uint8_t* scan_buffer) { | |
| const off64_t search_start = file_length - read_amount; | |
| if (lseek64(fd, search_start, SEEK_SET) != search_start) { | |
| ALOGW("Zip: seek %" PRId64 " failed: %s", static_cast<int64_t>(search_start), | |
| strerror(errno)); | |
| return kIoError; | |
| } | |
| ssize_t actual = TEMP_FAILURE_RETRY( | |
| read(fd, scan_buffer, static_cast<size_t>(read_amount))); | |
| if (actual != static_cast<ssize_t>(read_amount)) { | |
| ALOGW("Zip: read %" PRId64 " failed: %s", static_cast<int64_t>(read_amount), | |
| strerror(errno)); | |
| return kIoError; | |
| } | |
| /* | |
| * Scan backward for the EOCD magic. In an archive without a trailing | |
| * comment, we'll find it on the first try. (We may want to consider | |
| * doing an initial minimal read; if we don't find it, retry with a | |
| * second read as above.) | |
| */ | |
| int i = read_amount - sizeof(EocdRecord); | |
| for (; i >= 0; i--) { | |
| if (scan_buffer[i] == 0x50 && | |
| ((*reinterpret_cast<uint32_t*>(&scan_buffer[i])) == EocdRecord::kSignature)) { | |
| ALOGV("+++ Found EOCD at buf+%d", i); | |
| break; | |
| } | |
| } | |
| if (i < 0) { | |
| ALOGD("Zip: EOCD not found, %s is not zip", debug_file_name); | |
| return kInvalidFile; | |
| } | |
| const off64_t eocd_offset = search_start + i; | |
| const EocdRecord* eocd = reinterpret_cast<const EocdRecord*>(scan_buffer + i); | |
| /* | |
| * Verify that there's no trailing space at the end of the central directory | |
| * and its comment. | |
| */ | |
| const off64_t calculated_length = eocd_offset + sizeof(EocdRecord) | |
| + eocd->comment_length; | |
| if (calculated_length != file_length) { | |
| ALOGW("Zip: %" PRId64 " extraneous bytes at the end of the central directory", | |
| static_cast<int64_t>(file_length - calculated_length)); | |
| return kInvalidFile; | |
| } | |
| /* | |
| * Grab the CD offset and size, and the number of entries in the | |
| * archive and verify that they look reasonable. | |
| */ | |
| if (eocd->cd_start_offset + eocd->cd_size > eocd_offset) { | |
| ALOGW("Zip: bad offsets (dir %" PRIu32 ", size %" PRIu32 ", eocd %" PRId64 ")", | |
| eocd->cd_start_offset, eocd->cd_size, static_cast<int64_t>(eocd_offset)); | |
| return kInvalidOffset; | |
| } | |
| if (eocd->num_records == 0) { | |
| ALOGW("Zip: empty archive?"); | |
| return kEmptyArchive; | |
| } | |
| ALOGV("+++ num_entries=%" PRIu32 "dir_size=%" PRIu32 " dir_offset=%" PRIu32, | |
| eocd->num_records, eocd->cd_size, eocd->cd_start_offset); | |
| /* | |
| * It all looks good. Create a mapping for the CD, and set the fields | |
| * in archive. | |
| */ | |
| android::FileMap* map = MapFileSegment(fd, | |
| static_cast<off64_t>(eocd->cd_start_offset), | |
| static_cast<size_t>(eocd->cd_size), | |
| true /* read only */, debug_file_name); | |
| if (map == NULL) { | |
| archive->directory_map = NULL; | |
| return kMmapFailed; | |
| } | |
| archive->directory_map = map; | |
| archive->num_entries = eocd->num_records; | |
| archive->directory_offset = eocd->cd_start_offset; | |
| return 0; | |
| } | |
| /* | |
| * Find the zip Central Directory and memory-map it. | |
| * | |
| * On success, returns 0 after populating fields from the EOCD area: | |
| * directory_offset | |
| * directory_map | |
| * num_entries | |
| */ | |
| static int32_t MapCentralDirectory(int fd, const char* debug_file_name, | |
| ZipArchive* archive) { | |
| // Test file length. We use lseek64 to make sure the file | |
| // is small enough to be a zip file (Its size must be less than | |
| // 0xffffffff bytes). | |
| off64_t file_length = lseek64(fd, 0, SEEK_END); | |
| if (file_length == -1) { | |
| ALOGV("Zip: lseek on fd %d failed", fd); | |
| return kInvalidFile; | |
| } | |
| if (file_length > (off64_t) 0xffffffff) { | |
| ALOGV("Zip: zip file too long %" PRId64, static_cast<int64_t>(file_length)); | |
| return kInvalidFile; | |
| } | |
| if (file_length < static_cast<off64_t>(sizeof(EocdRecord))) { | |
| ALOGV("Zip: length %" PRId64 " is too small to be zip", static_cast<int64_t>(file_length)); | |
| return kInvalidFile; | |
| } | |
| /* | |
| * Perform the traditional EOCD snipe hunt. | |
| * | |
| * We're searching for the End of Central Directory magic number, | |
| * which appears at the start of the EOCD block. It's followed by | |
| * 18 bytes of EOCD stuff and up to 64KB of archive comment. We | |
| * need to read the last part of the file into a buffer, dig through | |
| * it to find the magic number, parse some values out, and use those | |
| * to determine the extent of the CD. | |
| * | |
| * We start by pulling in the last part of the file. | |
| */ | |
| off64_t read_amount = kMaxEOCDSearch; | |
| if (file_length < read_amount) { | |
| read_amount = file_length; | |
| } | |
| uint8_t* scan_buffer = reinterpret_cast<uint8_t*>(malloc(read_amount)); | |
| int32_t result = MapCentralDirectory0(fd, debug_file_name, archive, | |
| file_length, read_amount, scan_buffer); | |
| free(scan_buffer); | |
| return result; | |
| } | |
| /* | |
| * Parses the Zip archive's Central Directory. Allocates and populates the | |
| * hash table. | |
| * | |
| * Returns 0 on success. | |
| */ | |
| static int32_t ParseZipArchive(ZipArchive* archive) { | |
| int32_t result = -1; | |
| const uint8_t* const cd_ptr = (const uint8_t*) archive->directory_map->getDataPtr(); | |
| const size_t cd_length = archive->directory_map->getDataLength(); | |
| const uint16_t num_entries = archive->num_entries; | |
| /* | |
| * Create hash table. We have a minimum 75% load factor, possibly as | |
| * low as 50% after we round off to a power of 2. There must be at | |
| * least one unused entry to avoid an infinite loop during creation. | |
| */ | |
| archive->hash_table_size = RoundUpPower2(1 + (num_entries * 4) / 3); | |
| archive->hash_table = (ZipEntryName*) calloc(archive->hash_table_size, | |
| sizeof(ZipEntryName)); | |
| /* | |
| * Walk through the central directory, adding entries to the hash | |
| * table and verifying values. | |
| */ | |
| const uint8_t* const cd_end = cd_ptr + cd_length; | |
| const uint8_t* ptr = cd_ptr; | |
| for (uint16_t i = 0; i < num_entries; i++) { | |
| const CentralDirectoryRecord* cdr = | |
| reinterpret_cast<const CentralDirectoryRecord*>(ptr); | |
| if (cdr->record_signature != CentralDirectoryRecord::kSignature) { | |
| ALOGW("Zip: missed a central dir sig (at %" PRIu16 ")", i); | |
| goto bail; | |
| } | |
| if (ptr + sizeof(CentralDirectoryRecord) > cd_end) { | |
| ALOGW("Zip: ran off the end (at %" PRIu16 ")", i); | |
| goto bail; | |
| } | |
| const off64_t local_header_offset = cdr->local_file_header_offset; | |
| if (local_header_offset >= archive->directory_offset) { | |
| ALOGW("Zip: bad LFH offset %" PRId64 " at entry %" PRIu16, (int64_t)local_header_offset, i); | |
| goto bail; | |
| } | |
| const uint16_t file_name_length = cdr->file_name_length; | |
| const uint16_t extra_length = cdr->extra_field_length; | |
| const uint16_t comment_length = cdr->comment_length; | |
| const char* file_name = reinterpret_cast<const char*>(ptr + sizeof(CentralDirectoryRecord)); | |
| /* check that file name doesn't contain \0 character */ | |
| if (memchr(file_name, 0, file_name_length) != NULL) { | |
| ALOGW("Zip: entry name can't contain \\0 character"); | |
| goto bail; | |
| } | |
| /* add the CDE filename to the hash table */ | |
| const int add_result = AddToHash(archive->hash_table, | |
| archive->hash_table_size, file_name, file_name_length); | |
| if (add_result) { | |
| ALOGW("Zip: Error adding entry to hash table %d", add_result); | |
| result = add_result; | |
| goto bail; | |
| } | |
| ptr += sizeof(CentralDirectoryRecord) + file_name_length + extra_length + comment_length; | |
| if ((ptr - cd_ptr) > static_cast<int64_t>(cd_length)) { | |
| ALOGW("Zip: bad CD advance (%tu vs %zu) at entry %" PRIu16, | |
| ptr - cd_ptr, cd_length, i); | |
| goto bail; | |
| } | |
| } | |
| ALOGV("+++ zip good scan %" PRIu16 " entries", num_entries); | |
| result = 0; | |
| bail: | |
| return result; | |
| } | |
| static int32_t OpenArchiveInternal(ZipArchive* archive, | |
| const char* debug_file_name) { | |
| int32_t result = -1; | |
| if ((result = MapCentralDirectory(archive->fd, debug_file_name, archive))) { | |
| return result; | |
| } | |
| if ((result = ParseZipArchive(archive))) { | |
| return result; | |
| } | |
| return 0; | |
| } | |
| int32_t OpenArchiveFd(int fd, const char* debug_file_name, | |
| ZipArchiveHandle* handle) { | |
| ZipArchive* archive = new ZipArchive(fd); | |
| *handle = archive; | |
| return OpenArchiveInternal(archive, debug_file_name); | |
| } | |
| int32_t OpenArchive(const char* fileName, ZipArchiveHandle* handle) { | |
| const int fd = open(fileName, O_RDONLY | O_BINARY, 0); | |
| ZipArchive* archive = new ZipArchive(fd); | |
| *handle = archive; | |
| if (fd < 0) { | |
| ALOGW("Unable to open '%s': %s", fileName, strerror(errno)); | |
| return kIoError; | |
| } | |
| return OpenArchiveInternal(archive, fileName); | |
| } | |
| /* | |
| * Close a ZipArchive, closing the file and freeing the contents. | |
| */ | |
| void CloseArchive(ZipArchiveHandle handle) { | |
| ZipArchive* archive = (ZipArchive*) handle; | |
| ALOGV("Closing archive %p", archive); | |
| delete archive; | |
| } | |
| static int32_t UpdateEntryFromDataDescriptor(int fd, | |
| ZipEntry *entry) { | |
| uint8_t ddBuf[sizeof(DataDescriptor) + sizeof(DataDescriptor::kOptSignature)]; | |
| ssize_t actual = TEMP_FAILURE_RETRY(read(fd, ddBuf, sizeof(ddBuf))); | |
| if (actual != sizeof(ddBuf)) { | |
| return kIoError; | |
| } | |
| const uint32_t ddSignature = *(reinterpret_cast<const uint32_t*>(ddBuf)); | |
| const uint16_t offset = (ddSignature == DataDescriptor::kOptSignature) ? 4 : 0; | |
| const DataDescriptor* descriptor = reinterpret_cast<const DataDescriptor*>(ddBuf + offset); | |
| entry->crc32 = descriptor->crc32; | |
| entry->compressed_length = descriptor->compressed_size; | |
| entry->uncompressed_length = descriptor->uncompressed_size; | |
| return 0; | |
| } | |
| // Attempts to read |len| bytes into |buf| at offset |off|. | |
| // | |
| // This method uses pread64 on platforms that support it and | |
| // lseek64 + read on platforms that don't. This implies that | |
| // callers should not rely on the |fd| offset being incremented | |
| // as a side effect of this call. | |
| static inline ssize_t ReadAtOffset(int fd, uint8_t* buf, size_t len, | |
| off64_t off) { | |
| #ifdef HAVE_PREAD | |
| return TEMP_FAILURE_RETRY(pread64(fd, buf, len, off)); | |
| #else | |
| // The only supported platform that doesn't support pread at the moment | |
| // is Windows. Only recent versions of windows support unix like forks, | |
| // and even there the semantics are quite different. | |
| if (lseek64(fd, off, SEEK_SET) != off) { | |
| ALOGW("Zip: failed seek to offset %" PRId64, off); | |
| return kIoError; | |
| } | |
| return TEMP_FAILURE_RETRY(read(fd, buf, len)); | |
| #endif // HAVE_PREAD | |
| } | |
| static int32_t FindEntry(const ZipArchive* archive, const int ent, | |
| ZipEntry* data) { | |
| const uint16_t nameLen = archive->hash_table[ent].name_length; | |
| const char* name = archive->hash_table[ent].name; | |
| // Recover the start of the central directory entry from the filename | |
| // pointer. The filename is the first entry past the fixed-size data, | |
| // so we can just subtract back from that. | |
| const uint8_t* ptr = reinterpret_cast<const uint8_t*>(name); | |
| ptr -= sizeof(CentralDirectoryRecord); | |
| // This is the base of our mmapped region, we have to sanity check that | |
| // the name that's in the hash table is a pointer to a location within | |
| // this mapped region. | |
| const uint8_t* base_ptr = reinterpret_cast<const uint8_t*>( | |
| archive->directory_map->getDataPtr()); | |
| if (ptr < base_ptr || ptr > base_ptr + archive->directory_map->getDataLength()) { | |
| ALOGW("Zip: Invalid entry pointer"); | |
| return kInvalidOffset; | |
| } | |
| const CentralDirectoryRecord *cdr = | |
| reinterpret_cast<const CentralDirectoryRecord*>(ptr); | |
| // The offset of the start of the central directory in the zipfile. | |
| // We keep this lying around so that we can sanity check all our lengths | |
| // and our per-file structures. | |
| const off64_t cd_offset = archive->directory_offset; | |
| // Fill out the compression method, modification time, crc32 | |
| // and other interesting attributes from the central directory. These | |
| // will later be compared against values from the local file header. | |
| data->method = cdr->compression_method; | |
| data->mod_time = cdr->last_mod_time; | |
| data->crc32 = cdr->crc32; | |
| data->compressed_length = cdr->compressed_size; | |
| data->uncompressed_length = cdr->uncompressed_size; | |
| // Figure out the local header offset from the central directory. The | |
| // actual file data will begin after the local header and the name / | |
| // extra comments. | |
| const off64_t local_header_offset = cdr->local_file_header_offset; | |
| if (local_header_offset + static_cast<off64_t>(sizeof(LocalFileHeader)) >= cd_offset) { | |
| ALOGW("Zip: bad local hdr offset in zip"); | |
| return kInvalidOffset; | |
| } | |
| uint8_t lfh_buf[sizeof(LocalFileHeader)]; | |
| ssize_t actual = ReadAtOffset(archive->fd, lfh_buf, sizeof(lfh_buf), | |
| local_header_offset); | |
| if (actual != sizeof(lfh_buf)) { | |
| ALOGW("Zip: failed reading lfh name from offset %" PRId64, (int64_t)local_header_offset); | |
| return kIoError; | |
| } | |
| const LocalFileHeader *lfh = reinterpret_cast<const LocalFileHeader*>(lfh_buf); | |
| if (lfh->lfh_signature != LocalFileHeader::kSignature) { | |
| ALOGW("Zip: didn't find signature at start of lfh, offset=%" PRId64, | |
| static_cast<int64_t>(local_header_offset)); | |
| return kInvalidOffset; | |
| } | |
| // Paranoia: Match the values specified in the local file header | |
| // to those specified in the central directory. | |
| if ((lfh->gpb_flags & kGPBDDFlagMask) == 0) { | |
| data->has_data_descriptor = 0; | |
| if (data->compressed_length != lfh->compressed_size | |
| || data->uncompressed_length != lfh->uncompressed_size | |
| || data->crc32 != lfh->crc32) { | |
| ALOGW("Zip: size/crc32 mismatch. expected {%" PRIu32 ", %" PRIu32 | |
| ", %" PRIx32 "}, was {%" PRIu32 ", %" PRIu32 ", %" PRIx32 "}", | |
| data->compressed_length, data->uncompressed_length, data->crc32, | |
| lfh->compressed_size, lfh->uncompressed_size, lfh->crc32); | |
| return kInconsistentInformation; | |
| } | |
| } else { | |
| data->has_data_descriptor = 1; | |
| } | |
| // Check that the local file header name matches the declared | |
| // name in the central directory. | |
| if (lfh->file_name_length == nameLen) { | |
| const off64_t name_offset = local_header_offset + sizeof(LocalFileHeader); | |
| if (name_offset + lfh->file_name_length >= cd_offset) { | |
| ALOGW("Zip: Invalid declared length"); | |
| return kInvalidOffset; | |
| } | |
| uint8_t* name_buf = (uint8_t*) malloc(nameLen); | |
| ssize_t actual = ReadAtOffset(archive->fd, name_buf, nameLen, | |
| name_offset); | |
| if (actual != nameLen) { | |
| ALOGW("Zip: failed reading lfh name from offset %" PRId64, (int64_t)name_offset); | |
| free(name_buf); | |
| return kIoError; | |
| } | |
| if (memcmp(name, name_buf, nameLen)) { | |
| free(name_buf); | |
| return kInconsistentInformation; | |
| } | |
| free(name_buf); | |
| } else { | |
| ALOGW("Zip: lfh name did not match central directory."); | |
| return kInconsistentInformation; | |
| } | |
| const off64_t data_offset = local_header_offset + sizeof(LocalFileHeader) | |
| + lfh->file_name_length + lfh->extra_field_length; | |
| if (data_offset > cd_offset) { | |
| ALOGW("Zip: bad data offset %" PRId64 " in zip", (int64_t)data_offset); | |
| return kInvalidOffset; | |
| } | |
| if ((off64_t)(data_offset + data->compressed_length) > cd_offset) { | |
| ALOGW("Zip: bad compressed length in zip (%" PRId64 " + %" PRIu32 " > %" PRId64 ")", | |
| (int64_t)data_offset, data->compressed_length, (int64_t)cd_offset); | |
| return kInvalidOffset; | |
| } | |
| if (data->method == kCompressStored && | |
| (off64_t)(data_offset + data->uncompressed_length) > cd_offset) { | |
| ALOGW("Zip: bad uncompressed length in zip (%" PRId64 " + %" PRIu32 " > %" PRId64 ")", | |
| (int64_t)data_offset, data->uncompressed_length, (int64_t)cd_offset); | |
| return kInvalidOffset; | |
| } | |
| data->offset = data_offset; | |
| return 0; | |
| } | |
| struct IterationHandle { | |
| uint32_t position; | |
| const char* prefix; | |
| uint16_t prefix_len; | |
| ZipArchive* archive; | |
| }; | |
| int32_t StartIteration(ZipArchiveHandle handle, void** cookie_ptr, const char* prefix) { | |
| ZipArchive* archive = (ZipArchive *) handle; | |
| if (archive == NULL || archive->hash_table == NULL) { | |
| ALOGW("Zip: Invalid ZipArchiveHandle"); | |
| return kInvalidHandle; | |
| } | |
| IterationHandle* cookie = (IterationHandle*) malloc(sizeof(IterationHandle)); | |
| cookie->position = 0; | |
| cookie->prefix = prefix; | |
| cookie->archive = archive; | |
| if (prefix != NULL) { | |
| cookie->prefix_len = strlen(prefix); | |
| } | |
| *cookie_ptr = cookie ; | |
| return 0; | |
| } | |
| int32_t FindEntry(const ZipArchiveHandle handle, const char* entryName, | |
| ZipEntry* data) { | |
| const ZipArchive* archive = (ZipArchive*) handle; | |
| const int nameLen = strlen(entryName); | |
| if (nameLen == 0 || nameLen > 65535) { | |
| ALOGW("Zip: Invalid filename %s", entryName); | |
| return kInvalidEntryName; | |
| } | |
| const int64_t ent = EntryToIndex(archive->hash_table, | |
| archive->hash_table_size, entryName, nameLen); | |
| if (ent < 0) { | |
| ALOGV("Zip: Could not find entry %.*s", nameLen, entryName); | |
| return ent; | |
| } | |
| return FindEntry(archive, ent, data); | |
| } | |
| int32_t Next(void* cookie, ZipEntry* data, ZipEntryName* name) { | |
| IterationHandle* handle = (IterationHandle *) cookie; | |
| if (handle == NULL) { | |
| return kInvalidHandle; | |
| } | |
| ZipArchive* archive = handle->archive; | |
| if (archive == NULL || archive->hash_table == NULL) { | |
| ALOGW("Zip: Invalid ZipArchiveHandle"); | |
| return kInvalidHandle; | |
| } | |
| const uint32_t currentOffset = handle->position; | |
| const uint32_t hash_table_length = archive->hash_table_size; | |
| const ZipEntryName *hash_table = archive->hash_table; | |
| for (uint32_t i = currentOffset; i < hash_table_length; ++i) { | |
| if (hash_table[i].name != NULL && | |
| (handle->prefix == NULL || | |
| (memcmp(handle->prefix, hash_table[i].name, handle->prefix_len) == 0))) { | |
| handle->position = (i + 1); | |
| const int error = FindEntry(archive, i, data); | |
| if (!error) { | |
| name->name = hash_table[i].name; | |
| name->name_length = hash_table[i].name_length; | |
| } | |
| return error; | |
| } | |
| } | |
| handle->position = 0; | |
| return kIterationEnd; | |
| } | |
| static int32_t InflateToFile(int fd, const ZipEntry* entry, | |
| uint8_t* begin, uint32_t length, | |
| uint64_t* crc_out) { | |
| int32_t result = -1; | |
| const uint32_t kBufSize = 32768; | |
| uint8_t read_buf[kBufSize]; | |
| uint8_t write_buf[kBufSize]; | |
| z_stream zstream; | |
| int zerr; | |
| /* | |
| * Initialize the zlib stream struct. | |
| */ | |
| memset(&zstream, 0, sizeof(zstream)); | |
| zstream.zalloc = Z_NULL; | |
| zstream.zfree = Z_NULL; | |
| zstream.opaque = Z_NULL; | |
| zstream.next_in = NULL; | |
| zstream.avail_in = 0; | |
| zstream.next_out = (Bytef*) write_buf; | |
| zstream.avail_out = kBufSize; | |
| zstream.data_type = Z_UNKNOWN; | |
| /* | |
| * Use the undocumented "negative window bits" feature to tell zlib | |
| * that there's no zlib header waiting for it. | |
| */ | |
| zerr = inflateInit2(&zstream, -MAX_WBITS); | |
| if (zerr != Z_OK) { | |
| if (zerr == Z_VERSION_ERROR) { | |
| ALOGE("Installed zlib is not compatible with linked version (%s)", | |
| ZLIB_VERSION); | |
| } else { | |
| ALOGW("Call to inflateInit2 failed (zerr=%d)", zerr); | |
| } | |
| return kZlibError; | |
| } | |
| const uint32_t uncompressed_length = entry->uncompressed_length; | |
| uint32_t compressed_length = entry->compressed_length; | |
| uint32_t write_count = 0; | |
| do { | |
| /* read as much as we can */ | |
| if (zstream.avail_in == 0) { | |
| const ZD_TYPE getSize = (compressed_length > kBufSize) ? kBufSize : compressed_length; | |
| const ZD_TYPE actual = TEMP_FAILURE_RETRY(read(fd, read_buf, getSize)); | |
| if (actual != getSize) { | |
| ALOGW("Zip: inflate read failed (" ZD " vs " ZD ")", actual, getSize); | |
| result = kIoError; | |
| goto z_bail; | |
| } | |
| compressed_length -= getSize; | |
| zstream.next_in = read_buf; | |
| zstream.avail_in = getSize; | |
| } | |
| /* uncompress the data */ | |
| zerr = inflate(&zstream, Z_NO_FLUSH); | |
| if (zerr != Z_OK && zerr != Z_STREAM_END) { | |
| ALOGW("Zip: inflate zerr=%d (nIn=%p aIn=%u nOut=%p aOut=%u)", | |
| zerr, zstream.next_in, zstream.avail_in, | |
| zstream.next_out, zstream.avail_out); | |
| result = kZlibError; | |
| goto z_bail; | |
| } | |
| /* write when we're full or when we're done */ | |
| if (zstream.avail_out == 0 || | |
| (zerr == Z_STREAM_END && zstream.avail_out != kBufSize)) { | |
| const size_t write_size = zstream.next_out - write_buf; | |
| // The file might have declared a bogus length. | |
| if (write_size + write_count > length) { | |
| goto z_bail; | |
| } | |
| memcpy(begin + write_count, write_buf, write_size); | |
| write_count += write_size; | |
| zstream.next_out = write_buf; | |
| zstream.avail_out = kBufSize; | |
| } | |
| } while (zerr == Z_OK); | |
| assert(zerr == Z_STREAM_END); /* other errors should've been caught */ | |
| // stream.adler holds the crc32 value for such streams. | |
| *crc_out = zstream.adler; | |
| if (zstream.total_out != uncompressed_length || compressed_length != 0) { | |
| ALOGW("Zip: size mismatch on inflated file (%lu vs %" PRIu32 ")", | |
| zstream.total_out, uncompressed_length); | |
| result = kInconsistentInformation; | |
| goto z_bail; | |
| } | |
| result = 0; | |
| z_bail: | |
| inflateEnd(&zstream); /* free up any allocated structures */ | |
| return result; | |
| } | |
| int32_t ExtractToMemory(ZipArchiveHandle handle, | |
| ZipEntry* entry, uint8_t* begin, uint32_t size) { | |
| ZipArchive* archive = (ZipArchive*) handle; | |
| const uint16_t method = entry->method; | |
| off64_t data_offset = entry->offset; | |
| if (lseek64(archive->fd, data_offset, SEEK_SET) != data_offset) { | |
| ALOGW("Zip: lseek to data at %" PRId64 " failed", (int64_t)data_offset); | |
| return kIoError; | |
| } | |
| // this should default to kUnknownCompressionMethod. | |
| int32_t return_value = -1; | |
| uint64_t crc = 0; | |
| if (method == kCompressStored) { | |
| return_value = CopyFileToFile(archive->fd, begin, size, &crc); | |
| } else if (method == kCompressDeflated) { | |
| return_value = InflateToFile(archive->fd, entry, begin, size, &crc); | |
| } | |
| if (!return_value && entry->has_data_descriptor) { | |
| return_value = UpdateEntryFromDataDescriptor(archive->fd, entry); | |
| if (return_value) { | |
| return return_value; | |
| } | |
| } | |
| // TODO: Fix this check by passing the right flags to inflate2 so that | |
| // it calculates the CRC for us. | |
| if (entry->crc32 != crc && false) { | |
| ALOGW("Zip: crc mismatch: expected %" PRIu32 ", was %" PRIu64, entry->crc32, crc); | |
| return kInconsistentInformation; | |
| } | |
| return return_value; | |
| } | |
| int32_t ExtractEntryToFile(ZipArchiveHandle handle, | |
| ZipEntry* entry, int fd) { | |
| const int32_t declared_length = entry->uncompressed_length; | |
| const off64_t current_offset = lseek64(fd, 0, SEEK_CUR); | |
| if (current_offset == -1) { | |
| ALOGW("Zip: unable to seek to current location on fd %d: %s", fd, | |
| strerror(errno)); | |
| return kIoError; | |
| } | |
| int result = TEMP_FAILURE_RETRY(ftruncate(fd, declared_length + current_offset)); | |
| if (result == -1) { | |
| ALOGW("Zip: unable to truncate file to %" PRId64 ": %s", | |
| (int64_t)(declared_length + current_offset), strerror(errno)); | |
| return kIoError; | |
| } | |
| // Don't attempt to map a region of length 0. We still need the | |
| // ftruncate() though, since the API guarantees that we will truncate | |
| // the file to the end of the uncompressed output. | |
| if (declared_length == 0) { | |
| return 0; | |
| } | |
| android::FileMap* map = MapFileSegment(fd, current_offset, declared_length, | |
| false, kTempMappingFileName); | |
| if (map == NULL) { | |
| return kMmapFailed; | |
| } | |
| const int32_t error = ExtractToMemory(handle, entry, | |
| reinterpret_cast<uint8_t*>(map->getDataPtr()), | |
| map->getDataLength()); | |
| map->release(); | |
| return error; | |
| } | |
| const char* ErrorCodeString(int32_t error_code) { | |
| if (error_code > kErrorMessageLowerBound && error_code < kErrorMessageUpperBound) { | |
| return kErrorMessages[error_code * -1]; | |
| } | |
| return kErrorMessages[0]; | |
| } | |
| int GetFileDescriptor(const ZipArchiveHandle handle) { | |
| return ((ZipArchive*) handle)->fd; | |
| } | |