| /* |
| * Copyright (C) 2015 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define TRACE_TAG ADB |
| |
| #include "sysdeps.h" |
| |
| #include <signal.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <unistd.h> |
| |
| #include <thread> |
| |
| #include <android-base/errors.h> |
| #include <android-base/file.h> |
| #include <android-base/logging.h> |
| #include <android-base/quick_exit.h> |
| #include <android-base/stringprintf.h> |
| |
| #include "adb.h" |
| #include "adb_auth.h" |
| #include "adb_listeners.h" |
| #include "adb_utils.h" |
| #include "commandline.h" |
| #include "sysdeps/chrono.h" |
| #include "transport.h" |
| |
| static void setup_daemon_logging() { |
| const std::string log_file_path(GetLogFilePath()); |
| int fd = unix_open(log_file_path.c_str(), O_WRONLY | O_CREAT | O_APPEND, 0640); |
| if (fd == -1) { |
| fatal("cannot open '%s': %s", log_file_path.c_str(), strerror(errno)); |
| } |
| if (dup2(fd, STDOUT_FILENO) == -1) { |
| fatal("cannot redirect stdout: %s", strerror(errno)); |
| } |
| if (dup2(fd, STDERR_FILENO) == -1) { |
| fatal("cannot redirect stderr: %s", strerror(errno)); |
| } |
| unix_close(fd); |
| |
| fprintf(stderr, "--- adb starting (pid %d) ---\n", getpid()); |
| LOG(INFO) << adb_version(); |
| } |
| |
| #if defined(_WIN32) |
| static BOOL WINAPI ctrlc_handler(DWORD type) { |
| // TODO: Consider trying to kill a starting up adb server (if we're in |
| // launch_server) by calling GenerateConsoleCtrlEvent(). |
| android::base::quick_exit(STATUS_CONTROL_C_EXIT); |
| return TRUE; |
| } |
| #endif |
| |
| void adb_server_cleanup() { |
| // Upon exit, we want to clean up in the following order: |
| // 1. close_smartsockets, so that we don't get any new clients |
| // 2. kick_all_transports, to avoid writing only part of a packet to a transport. |
| // 3. usb_cleanup, to tear down the USB stack. |
| close_smartsockets(); |
| kick_all_transports(); |
| usb_cleanup(); |
| } |
| |
| int adb_server_main(int is_daemon, const std::string& socket_spec, int ack_reply_fd) { |
| #if defined(_WIN32) |
| // adb start-server starts us up with stdout and stderr hooked up to |
| // anonymous pipes. When the C Runtime sees this, it makes stderr and |
| // stdout buffered, but to improve the chance that error output is seen, |
| // unbuffer stdout and stderr just like if we were run at the console. |
| // This also keeps stderr unbuffered when it is redirected to adb.log. |
| if (is_daemon) { |
| if (setvbuf(stdout, NULL, _IONBF, 0) == -1) { |
| fatal("cannot make stdout unbuffered: %s", strerror(errno)); |
| } |
| if (setvbuf(stderr, NULL, _IONBF, 0) == -1) { |
| fatal("cannot make stderr unbuffered: %s", strerror(errno)); |
| } |
| } |
| |
| SetConsoleCtrlHandler(ctrlc_handler, TRUE); |
| #else |
| signal(SIGINT, [](int) { |
| fdevent_run_on_main_thread([]() { android::base::quick_exit(0); }); |
| }); |
| #endif |
| |
| if (is_daemon) { |
| close_stdin(); |
| setup_daemon_logging(); |
| } |
| |
| android::base::at_quick_exit(adb_server_cleanup); |
| |
| init_transport_registration(); |
| init_mdns_transport_discovery(); |
| |
| usb_init(); |
| local_init(DEFAULT_ADB_LOCAL_TRANSPORT_PORT); |
| |
| std::string error; |
| |
| auto start = std::chrono::steady_clock::now(); |
| |
| // If we told a previous adb server to quit because of version mismatch, we can get to this |
| // point before it's finished exiting. Retry for a while to give it some time. |
| while (install_listener(socket_spec, "*smartsocket*", nullptr, 0, nullptr, &error) != |
| INSTALL_STATUS_OK) { |
| if (std::chrono::steady_clock::now() - start > 0.5s) { |
| fatal("could not install *smartsocket* listener: %s", error.c_str()); |
| } |
| |
| std::this_thread::sleep_for(100ms); |
| } |
| |
| adb_auth_init(); |
| |
| if (is_daemon) { |
| #if !defined(_WIN32) |
| // Start a new session for the daemon. Do this here instead of after the fork so |
| // that a ctrl-c between the "starting server" and "done starting server" messages |
| // gets a chance to terminate the server. |
| // setsid will fail with EPERM if it's already been a lead process of new session. |
| // Ignore such error. |
| if (setsid() == -1 && errno != EPERM) { |
| fatal("setsid() failed: %s", strerror(errno)); |
| } |
| #endif |
| |
| // Wait for the USB scan to complete before notifying the parent that we're up. |
| // We need to perform this in a thread, because we would otherwise block the event loop. |
| std::thread notify_thread([ack_reply_fd]() { |
| adb_wait_for_device_initialization(); |
| |
| // Any error output written to stderr now goes to adb.log. We could |
| // keep around a copy of the stderr fd and use that to write any errors |
| // encountered by the following code, but that is probably overkill. |
| #if defined(_WIN32) |
| const HANDLE ack_reply_handle = cast_int_to_handle(ack_reply_fd); |
| const CHAR ack[] = "OK\n"; |
| const DWORD bytes_to_write = arraysize(ack) - 1; |
| DWORD written = 0; |
| if (!WriteFile(ack_reply_handle, ack, bytes_to_write, &written, NULL)) { |
| fatal("adb: cannot write ACK to handle 0x%p: %s", ack_reply_handle, |
| android::base::SystemErrorCodeToString(GetLastError()).c_str()); |
| } |
| if (written != bytes_to_write) { |
| fatal("adb: cannot write %lu bytes of ACK: only wrote %lu bytes", bytes_to_write, |
| written); |
| } |
| CloseHandle(ack_reply_handle); |
| #else |
| // TODO(danalbert): Can't use SendOkay because we're sending "OK\n", not |
| // "OKAY". |
| if (!android::base::WriteStringToFd("OK\n", ack_reply_fd)) { |
| fatal_errno("error writing ACK to fd %d", ack_reply_fd); |
| } |
| unix_close(ack_reply_fd); |
| #endif |
| }); |
| notify_thread.detach(); |
| } |
| |
| D("Event loop starting"); |
| fdevent_loop(); |
| |
| return 0; |
| } |
| |
| int main(int argc, char** argv) { |
| adb_trace_init(argv); |
| return adb_commandline(argc - 1, const_cast<const char**>(argv + 1)); |
| } |