| /* | |
| * Copyright (C) 2007 The Android Open Source Project | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); | |
| * you may not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| #define TRACE_TAG USB | |
| #include "sysdeps.h" | |
| #include <dirent.h> | |
| #include <errno.h> | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <sys/ioctl.h> | |
| #include <sys/mman.h> | |
| #include <sys/types.h> | |
| #include <unistd.h> | |
| #include <linux/usb/ch9.h> | |
| #include <linux/usb/functionfs.h> | |
| #include <algorithm> | |
| #include <atomic> | |
| #include <chrono> | |
| #include <condition_variable> | |
| #include <mutex> | |
| #include <thread> | |
| #include <android-base/logging.h> | |
| #include <android-base/properties.h> | |
| #include "adb.h" | |
| #include "adbd/usb.h" | |
| #include "transport.h" | |
| using namespace std::chrono_literals; | |
| #define MAX_PACKET_SIZE_FS 64 | |
| #define MAX_PACKET_SIZE_HS 512 | |
| #define MAX_PACKET_SIZE_SS 1024 | |
| #define USB_FFS_BULK_SIZE 16384 | |
| // Number of buffers needed to fit MAX_PAYLOAD, with an extra for ZLPs. | |
| #define USB_FFS_NUM_BUFS ((4 * MAX_PAYLOAD / USB_FFS_BULK_SIZE) + 1) | |
| static unique_fd& dummy_fd = *new unique_fd(); | |
| static void aio_block_init(aio_block* aiob, unsigned num_bufs) { | |
| aiob->iocb.resize(num_bufs); | |
| aiob->iocbs.resize(num_bufs); | |
| aiob->events.resize(num_bufs); | |
| aiob->num_submitted = 0; | |
| for (unsigned i = 0; i < num_bufs; i++) { | |
| aiob->iocbs[i] = &aiob->iocb[i]; | |
| } | |
| memset(&aiob->ctx, 0, sizeof(aiob->ctx)); | |
| if (io_setup(num_bufs, &aiob->ctx)) { | |
| D("[ aio: got error on io_setup (%d) ]", errno); | |
| } | |
| } | |
| static int getMaxPacketSize(int ffs_fd) { | |
| usb_endpoint_descriptor desc; | |
| if (ioctl(ffs_fd, FUNCTIONFS_ENDPOINT_DESC, reinterpret_cast<unsigned long>(&desc))) { | |
| D("[ could not get endpoint descriptor! (%d) ]", errno); | |
| return MAX_PACKET_SIZE_HS; | |
| } else { | |
| return desc.wMaxPacketSize; | |
| } | |
| } | |
| static bool init_functionfs(struct usb_handle* h) { | |
| LOG(INFO) << "initializing functionfs"; | |
| if (!open_functionfs(&h->control, &h->bulk_out, &h->bulk_in)) { | |
| return false; | |
| } | |
| h->read_aiob.fd = h->bulk_out.get(); | |
| h->write_aiob.fd = h->bulk_in.get(); | |
| h->reads_zero_packets = true; | |
| return true; | |
| } | |
| static void usb_legacy_ffs_open_thread(usb_handle* usb) { | |
| adb_thread_setname("usb legacy ffs open"); | |
| while (true) { | |
| // wait until the USB device needs opening | |
| std::unique_lock<std::mutex> lock(usb->lock); | |
| while (!usb->open_new_connection) { | |
| usb->notify.wait(lock); | |
| } | |
| usb->open_new_connection = false; | |
| lock.unlock(); | |
| while (true) { | |
| if (init_functionfs(usb)) { | |
| LOG(INFO) << "functionfs successfully initialized"; | |
| break; | |
| } | |
| std::this_thread::sleep_for(1s); | |
| } | |
| LOG(INFO) << "registering usb transport"; | |
| register_usb_transport(usb, nullptr, nullptr, 1); | |
| } | |
| // never gets here | |
| abort(); | |
| } | |
| static int usb_ffs_write(usb_handle* h, const void* data, int len) { | |
| D("about to write (fd=%d, len=%d)", h->bulk_in.get(), len); | |
| const char* buf = static_cast<const char*>(data); | |
| int orig_len = len; | |
| while (len > 0) { | |
| int write_len = std::min(USB_FFS_BULK_SIZE, len); | |
| int n = adb_write(h->bulk_in, buf, write_len); | |
| if (n < 0) { | |
| D("ERROR: fd = %d, n = %d: %s", h->bulk_in.get(), n, strerror(errno)); | |
| return -1; | |
| } | |
| buf += n; | |
| len -= n; | |
| } | |
| D("[ done fd=%d ]", h->bulk_in.get()); | |
| return orig_len; | |
| } | |
| static int usb_ffs_read(usb_handle* h, void* data, int len) { | |
| D("about to read (fd=%d, len=%d)", h->bulk_out.get(), len); | |
| char* buf = static_cast<char*>(data); | |
| int orig_len = len; | |
| while (len > 0) { | |
| int read_len = std::min(USB_FFS_BULK_SIZE, len); | |
| int n = adb_read(h->bulk_out, buf, read_len); | |
| if (n < 0) { | |
| D("ERROR: fd = %d, n = %d: %s", h->bulk_out.get(), n, strerror(errno)); | |
| return -1; | |
| } | |
| buf += n; | |
| len -= n; | |
| } | |
| D("[ done fd=%d ]", h->bulk_out.get()); | |
| return orig_len; | |
| } | |
| static int usb_ffs_do_aio(usb_handle* h, const void* data, int len, bool read) { | |
| aio_block* aiob = read ? &h->read_aiob : &h->write_aiob; | |
| bool zero_packet = false; | |
| int num_bufs = len / h->io_size + (len % h->io_size == 0 ? 0 : 1); | |
| const char* cur_data = reinterpret_cast<const char*>(data); | |
| int packet_size = getMaxPacketSize(aiob->fd); | |
| if (posix_madvise(const_cast<void*>(data), len, POSIX_MADV_SEQUENTIAL | POSIX_MADV_WILLNEED) < | |
| 0) { | |
| D("[ Failed to madvise: %d ]", errno); | |
| } | |
| for (int i = 0; i < num_bufs; i++) { | |
| int buf_len = std::min(len, static_cast<int>(h->io_size)); | |
| io_prep(&aiob->iocb[i], aiob->fd, cur_data, buf_len, 0, read); | |
| len -= buf_len; | |
| cur_data += buf_len; | |
| if (len == 0 && buf_len % packet_size == 0 && read) { | |
| // adb does not expect the device to send a zero packet after data transfer, | |
| // but the host *does* send a zero packet for the device to read. | |
| zero_packet = h->reads_zero_packets; | |
| } | |
| } | |
| if (zero_packet) { | |
| io_prep(&aiob->iocb[num_bufs], aiob->fd, reinterpret_cast<const void*>(cur_data), | |
| packet_size, 0, read); | |
| num_bufs += 1; | |
| } | |
| while (true) { | |
| if (TEMP_FAILURE_RETRY(io_submit(aiob->ctx, num_bufs, aiob->iocbs.data())) < num_bufs) { | |
| PLOG(ERROR) << "aio: got error submitting " << (read ? "read" : "write"); | |
| return -1; | |
| } | |
| if (TEMP_FAILURE_RETRY(io_getevents(aiob->ctx, num_bufs, num_bufs, aiob->events.data(), | |
| nullptr)) < num_bufs) { | |
| PLOG(ERROR) << "aio: got error waiting " << (read ? "read" : "write"); | |
| return -1; | |
| } | |
| if (num_bufs == 1 && aiob->events[0].res == -EINTR) { | |
| continue; | |
| } | |
| int ret = 0; | |
| for (int i = 0; i < num_bufs; i++) { | |
| if (aiob->events[i].res < 0) { | |
| errno = -aiob->events[i].res; | |
| PLOG(ERROR) << "aio: got error event on " << (read ? "read" : "write") | |
| << " total bufs " << num_bufs; | |
| return -1; | |
| } | |
| ret += aiob->events[i].res; | |
| } | |
| return ret; | |
| } | |
| } | |
| static int usb_ffs_aio_read(usb_handle* h, void* data, int len) { | |
| return usb_ffs_do_aio(h, data, len, true); | |
| } | |
| static int usb_ffs_aio_write(usb_handle* h, const void* data, int len) { | |
| return usb_ffs_do_aio(h, data, len, false); | |
| } | |
| static void usb_ffs_kick(usb_handle* h) { | |
| int err; | |
| err = ioctl(h->bulk_in.get(), FUNCTIONFS_CLEAR_HALT); | |
| if (err < 0) { | |
| D("[ kick: source (fd=%d) clear halt failed (%d) ]", h->bulk_in.get(), errno); | |
| } | |
| err = ioctl(h->bulk_out.get(), FUNCTIONFS_CLEAR_HALT); | |
| if (err < 0) { | |
| D("[ kick: sink (fd=%d) clear halt failed (%d) ]", h->bulk_out.get(), errno); | |
| } | |
| // don't close ep0 here, since we may not need to reinitialize it with | |
| // the same descriptors again. if however ep1/ep2 fail to re-open in | |
| // init_functionfs, only then would we close and open ep0 again. | |
| // Ditto the comment in usb_adb_kick. | |
| h->kicked = true; | |
| TEMP_FAILURE_RETRY(dup2(dummy_fd.get(), h->bulk_out.get())); | |
| TEMP_FAILURE_RETRY(dup2(dummy_fd.get(), h->bulk_in.get())); | |
| } | |
| static void usb_ffs_close(usb_handle* h) { | |
| LOG(INFO) << "closing functionfs transport"; | |
| h->kicked = false; | |
| h->bulk_out.reset(); | |
| h->bulk_in.reset(); | |
| // Notify usb_adb_open_thread to open a new connection. | |
| h->lock.lock(); | |
| h->open_new_connection = true; | |
| h->lock.unlock(); | |
| h->notify.notify_one(); | |
| } | |
| usb_handle* create_usb_handle(unsigned num_bufs, unsigned io_size) { | |
| usb_handle* h = new usb_handle(); | |
| if (android::base::GetBoolProperty("sys.usb.ffs.aio_compat", false)) { | |
| // Devices on older kernels (< 3.18) will not have aio support for ffs | |
| // unless backported. Fall back on the non-aio functions instead. | |
| h->write = usb_ffs_write; | |
| h->read = usb_ffs_read; | |
| } else { | |
| h->write = usb_ffs_aio_write; | |
| h->read = usb_ffs_aio_read; | |
| aio_block_init(&h->read_aiob, num_bufs); | |
| aio_block_init(&h->write_aiob, num_bufs); | |
| } | |
| h->io_size = io_size; | |
| h->kick = usb_ffs_kick; | |
| h->close = usb_ffs_close; | |
| return h; | |
| } | |
| void usb_init_legacy() { | |
| D("[ usb_init - using legacy FunctionFS ]"); | |
| dummy_fd.reset(adb_open("/dev/null", O_WRONLY | O_CLOEXEC)); | |
| CHECK_NE(-1, dummy_fd.get()); | |
| std::thread(usb_legacy_ffs_open_thread, create_usb_handle(USB_FFS_NUM_BUFS, USB_FFS_BULK_SIZE)) | |
| .detach(); | |
| } | |
| int usb_write(usb_handle* h, const void* data, int len) { | |
| return h->write(h, data, len); | |
| } | |
| int usb_read(usb_handle* h, void* data, int len) { | |
| return h->read(h, data, len); | |
| } | |
| int usb_close(usb_handle* h) { | |
| h->close(h); | |
| return 0; | |
| } | |
| void usb_reset(usb_handle* h) { | |
| usb_close(h); | |
| } | |
| void usb_kick(usb_handle* h) { | |
| h->kick(h); | |
| } |