| /* libs/diskconfig/diskconfig.c | |
| * | |
| * Copyright 2008, The Android Open Source Project | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); | |
| * you may not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| #define LOG_TAG "config_mbr" | |
| #include <stdint.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <stdio.h> | |
| #include <cutils/log.h> | |
| #include <diskconfig/diskconfig.h> | |
| /* start and len are in LBA units */ | |
| static void | |
| cfg_pentry(struct pc_partition *pentry, uint8_t status, uint8_t type, | |
| uint32_t start, uint32_t len) | |
| { | |
| if (len > 0) { | |
| /* seems that somes BIOSens can get wedged on boot while verifying | |
| * the mbr if these are 0 */ | |
| memset(&pentry->start, 0xff, sizeof(struct chs)); | |
| memset(&pentry->end, 0xff, sizeof(struct chs)); | |
| } else { | |
| /* zero out the c/h/s entries.. they are not used */ | |
| memset(&pentry->start, 0, sizeof(struct chs)); | |
| memset(&pentry->end, 0, sizeof(struct chs)); | |
| } | |
| pentry->status = status; | |
| pentry->type = type; | |
| pentry->start_lba = start; | |
| pentry->len_lba = len; | |
| ALOGI("Configuring pentry. status=0x%x type=0x%x start_lba=%u len_lba=%u", | |
| pentry->status, pentry->type, pentry->start_lba, pentry->len_lba); | |
| } | |
| static inline uint32_t | |
| kb_to_lba(uint32_t len_kb, uint32_t sect_size) | |
| { | |
| uint64_t lba; | |
| lba = (uint64_t)len_kb * 1024; | |
| /* bump it up to the next LBA boundary just in case */ | |
| lba = (lba + (uint64_t)sect_size - 1) & ~((uint64_t)sect_size - 1); | |
| lba /= (uint64_t)sect_size; | |
| if (lba >= 0xffffffffULL) | |
| ALOGE("Error converting kb -> lba. 32bit overflow, expect weirdness"); | |
| return (uint32_t)(lba & 0xffffffffULL); | |
| } | |
| static struct write_list * | |
| mk_pri_pentry(struct disk_info *dinfo, struct part_info *pinfo, int pnum, | |
| uint32_t *lba) | |
| { | |
| struct write_list *item; | |
| struct pc_partition *pentry; | |
| if (pnum >= PC_NUM_BOOT_RECORD_PARTS) { | |
| ALOGE("Maximum number of primary partition exceeded."); | |
| return NULL; | |
| } | |
| if (!(item = alloc_wl(sizeof(struct pc_partition)))) { | |
| ALOGE("Unable to allocate memory for partition entry."); | |
| return NULL; | |
| } | |
| { | |
| /* DO NOT DEREFERENCE */ | |
| struct pc_boot_record *mbr = (void *)PC_MBR_DISK_OFFSET; | |
| /* grab the offset in mbr where to write this partition entry. */ | |
| item->offset = (loff_t)((uintptr_t)((uint8_t *)(&mbr->ptable[pnum]))); | |
| } | |
| pentry = (struct pc_partition *) &item->data; | |
| /* need a standard primary partition entry */ | |
| if (pinfo) { | |
| /* need this to be 64 bit in case len_kb is large */ | |
| uint64_t len_lba; | |
| if (pinfo->len_kb != (uint32_t)-1) { | |
| /* bump it up to the next LBA boundary just in case */ | |
| len_lba = ((uint64_t)pinfo->len_kb * 1024); | |
| len_lba += ((uint64_t)dinfo->sect_size - 1); | |
| len_lba &= ~((uint64_t)dinfo->sect_size - 1); | |
| len_lba /= (uint64_t)dinfo->sect_size; | |
| } else { | |
| /* make it fill the rest of disk */ | |
| len_lba = dinfo->num_lba - *lba; | |
| } | |
| cfg_pentry(pentry, ((pinfo->flags & PART_ACTIVE_FLAG) ? | |
| PC_PART_ACTIVE : PC_PART_NORMAL), | |
| pinfo->type, *lba, (uint32_t)len_lba); | |
| pinfo->start_lba = *lba; | |
| *lba += (uint32_t)len_lba; | |
| } else { | |
| /* this should be made an extended partition, and should take | |
| * up the rest of the disk as a primary partition */ | |
| cfg_pentry(pentry, PC_PART_NORMAL, PC_PART_TYPE_EXTENDED, | |
| *lba, dinfo->num_lba - *lba); | |
| /* note that we do not update the *lba because we now have to | |
| * create a chain of extended partition tables, and first one is at | |
| * *lba */ | |
| } | |
| return item; | |
| } | |
| /* This function configures an extended boot record at the beginning of an | |
| * extended partition. This creates a logical partition and a pointer to | |
| * the next EBR. | |
| * | |
| * ext_lba == The start of the toplevel extended partition (pointed to by the | |
| * entry in the MBR). | |
| */ | |
| static struct write_list * | |
| mk_ext_pentry(struct disk_info *dinfo, struct part_info *pinfo, uint32_t *lba, | |
| uint32_t ext_lba, struct part_info *pnext) | |
| { | |
| struct write_list *item; | |
| struct pc_boot_record *ebr; | |
| uint32_t len; /* in lba units */ | |
| if (!(item = alloc_wl(sizeof(struct pc_boot_record)))) { | |
| ALOGE("Unable to allocate memory for EBR."); | |
| return NULL; | |
| } | |
| /* we are going to write the ebr at the current LBA, and then bump the | |
| * lba counter since that is where the logical data partition will start */ | |
| item->offset = ((loff_t)(*lba)) * dinfo->sect_size; | |
| (*lba)++; | |
| ebr = (struct pc_boot_record *) &item->data; | |
| memset(ebr, 0, sizeof(struct pc_boot_record)); | |
| ebr->mbr_sig = PC_BIOS_BOOT_SIG; | |
| if (pinfo->len_kb != (uint32_t)-1) | |
| len = kb_to_lba(pinfo->len_kb, dinfo->sect_size); | |
| else { | |
| if (pnext) { | |
| ALOGE("Only the last partition can be specified to fill the disk " | |
| "(name = '%s')", pinfo->name); | |
| goto fail; | |
| } | |
| len = dinfo->num_lba - *lba; | |
| /* update the pinfo structure to reflect the new size, for | |
| * bookkeeping */ | |
| pinfo->len_kb = | |
| (uint32_t)(((uint64_t)len * (uint64_t)dinfo->sect_size) / | |
| ((uint64_t)1024)); | |
| } | |
| cfg_pentry(&ebr->ptable[PC_EBR_LOGICAL_PART], PC_PART_NORMAL, | |
| pinfo->type, 1, len); | |
| pinfo->start_lba = *lba; | |
| *lba += len; | |
| /* If this is not the last partition, we have to create a link to the | |
| * next extended partition. | |
| * | |
| * Otherwise, there's nothing to do since the "pointer entry" is | |
| * already zero-filled. | |
| */ | |
| if (pnext) { | |
| /* The start lba for next partition is an offset from the beginning | |
| * of the top-level extended partition */ | |
| uint32_t next_start_lba = *lba - ext_lba; | |
| uint32_t next_len_lba; | |
| if (pnext->len_kb != (uint32_t)-1) | |
| next_len_lba = 1 + kb_to_lba(pnext->len_kb, dinfo->sect_size); | |
| else | |
| next_len_lba = dinfo->num_lba - *lba; | |
| cfg_pentry(&ebr->ptable[PC_EBR_NEXT_PTR_PART], PC_PART_NORMAL, | |
| PC_PART_TYPE_EXTENDED, next_start_lba, next_len_lba); | |
| } | |
| return item; | |
| fail: | |
| free_wl(item); | |
| return NULL; | |
| } | |
| static struct write_list * | |
| mk_mbr_sig() | |
| { | |
| struct write_list *item; | |
| if (!(item = alloc_wl(sizeof(uint16_t)))) { | |
| ALOGE("Unable to allocate memory for MBR signature."); | |
| return NULL; | |
| } | |
| { | |
| /* DO NOT DEREFERENCE */ | |
| struct pc_boot_record *mbr = (void *)PC_MBR_DISK_OFFSET; | |
| /* grab the offset in mbr where to write mbr signature. */ | |
| item->offset = (loff_t)((uintptr_t)((uint8_t *)(&mbr->mbr_sig))); | |
| } | |
| *((uint16_t*)item->data) = PC_BIOS_BOOT_SIG; | |
| return item; | |
| } | |
| struct write_list * | |
| config_mbr(struct disk_info *dinfo) | |
| { | |
| struct part_info *pinfo; | |
| uint32_t cur_lba = dinfo->skip_lba; | |
| uint32_t ext_lba = 0; | |
| struct write_list *wr_list = NULL; | |
| struct write_list *temp_wr = NULL; | |
| int cnt = 0; | |
| int extended = 0; | |
| if (!dinfo->part_lst) | |
| return NULL; | |
| for (cnt = 0; cnt < dinfo->num_parts; ++cnt) { | |
| pinfo = &dinfo->part_lst[cnt]; | |
| /* Should we create an extedned partition? */ | |
| if (cnt == (PC_NUM_BOOT_RECORD_PARTS - 1)) { | |
| if (cnt + 1 < dinfo->num_parts) { | |
| extended = 1; | |
| ext_lba = cur_lba; | |
| if ((temp_wr = mk_pri_pentry(dinfo, NULL, cnt, &cur_lba))) | |
| wlist_add(&wr_list, temp_wr); | |
| else { | |
| ALOGE("Cannot create primary extended partition."); | |
| goto fail; | |
| } | |
| } | |
| } | |
| /* if extended, need 1 lba for ebr */ | |
| if ((cur_lba + extended) >= dinfo->num_lba) | |
| goto nospace; | |
| else if (pinfo->len_kb != (uint32_t)-1) { | |
| uint32_t sz_lba = (pinfo->len_kb / dinfo->sect_size) * 1024; | |
| if ((cur_lba + sz_lba + extended) > dinfo->num_lba) | |
| goto nospace; | |
| } | |
| if (!extended) | |
| temp_wr = mk_pri_pentry(dinfo, pinfo, cnt, &cur_lba); | |
| else { | |
| struct part_info *pnext; | |
| pnext = cnt + 1 < dinfo->num_parts ? &dinfo->part_lst[cnt+1] : NULL; | |
| temp_wr = mk_ext_pentry(dinfo, pinfo, &cur_lba, ext_lba, pnext); | |
| } | |
| if (temp_wr) | |
| wlist_add(&wr_list, temp_wr); | |
| else { | |
| ALOGE("Cannot create partition %d (%s).", cnt, pinfo->name); | |
| goto fail; | |
| } | |
| } | |
| /* fill in the rest of the MBR with empty parts (if needed). */ | |
| for (; cnt < PC_NUM_BOOT_RECORD_PARTS; ++cnt) { | |
| struct part_info blank; | |
| cur_lba = 0; | |
| memset(&blank, 0, sizeof(struct part_info)); | |
| if (!(temp_wr = mk_pri_pentry(dinfo, &blank, cnt, &cur_lba))) { | |
| ALOGE("Cannot create blank partition %d.", cnt); | |
| goto fail; | |
| } | |
| wlist_add(&wr_list, temp_wr); | |
| } | |
| if ((temp_wr = mk_mbr_sig())) | |
| wlist_add(&wr_list, temp_wr); | |
| else { | |
| ALOGE("Cannot set MBR signature"); | |
| goto fail; | |
| } | |
| return wr_list; | |
| nospace: | |
| ALOGE("Not enough space to add parttion '%s'.", pinfo->name); | |
| fail: | |
| wlist_free(wr_list); | |
| return NULL; | |
| } | |
| /* Returns the device path of the partition referred to by 'name' | |
| * Must be freed by the caller. | |
| */ | |
| char * | |
| find_mbr_part(struct disk_info *dinfo, const char *name) | |
| { | |
| struct part_info *plist = dinfo->part_lst; | |
| int num = 0; | |
| char *dev_name = NULL; | |
| int has_extended = (dinfo->num_parts > PC_NUM_BOOT_RECORD_PARTS); | |
| for(num = 1; num <= dinfo->num_parts; ++num) { | |
| if (!strcmp(plist[num-1].name, name)) | |
| break; | |
| } | |
| if (num > dinfo->num_parts) | |
| return NULL; | |
| if (has_extended && (num >= PC_NUM_BOOT_RECORD_PARTS)) | |
| num++; | |
| if (!(dev_name = malloc(MAX_NAME_LEN))) { | |
| ALOGE("Cannot allocate memory."); | |
| return NULL; | |
| } | |
| num = snprintf(dev_name, MAX_NAME_LEN, "%s%d", dinfo->device, num); | |
| if (num >= MAX_NAME_LEN) { | |
| ALOGE("Device name is too long?!"); | |
| free(dev_name); | |
| return NULL; | |
| } | |
| return dev_name; | |
| } |