Google Git
Sign in
coral / android-core / a922f4e5e45b867dd16a0dd2560cf0e802daa158 / . / libpixelflinger / codeflinger / MIPSAssembler.cpp
blob: 039a72504786b1742570667feab66f5e1a560068 [file] [log] [blame]
/* libs/pixelflinger/codeflinger/MIPSAssembler.cpp
**
** Copyright 2012, The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
** http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
/* MIPS assembler and ARM->MIPS assembly translator
**
** The approach is to leave the GGLAssembler and associated files largely
** un-changed, still utilizing all Arm instruction generation. Via the
** ArmToMipsAssembler (subclassed from ArmAssemblerInterface) each Arm
** instruction is translated to one or more Mips instructions as necessary. This
** is clearly less efficient than a direct implementation within the
** GGLAssembler, but is far cleaner, more maintainable, and has yielded very
** significant performance gains on Mips compared to the generic pixel pipeline.
**
**
** GGLAssembler changes
**
** - The register allocator has been modified to re-map Arm registers 0-15 to mips
** registers 2-17. Mips register 0 cannot be used as general-purpose register,
** and register 1 has traditional uses as a short-term temporary.
**
** - Added some early bailouts for OUT_OF_REGISTERS in texturing.cpp and
** GGLAssembler.cpp, since this is not fatal, and can be retried at lower
** optimization level.
**
**
** ARMAssembler and ARMAssemblerInterface changes
**
** Refactored ARM address-mode static functions (imm(), reg_imm(), imm12_pre(), etc.)
** to virtual, so they can be overridden in MIPSAssembler. The implementation of these
** functions on ARM is moved from ARMAssemblerInterface.cpp to ARMAssembler.cpp, and
** is unchanged from the original. (This required duplicating 2 of these as static
** functions in ARMAssemblerInterface.cpp so they could be used as static initializers).
*/
#define LOG_TAG "MIPSAssembler"
#include <stdio.h>
#include <stdlib.h>
#include <inttypes.h>
#include <cutils/properties.h>
#include <log/log.h>
#include <private/pixelflinger/ggl_context.h>
#include "CodeCache.h"
#include "MIPSAssembler.h"
#include "mips_disassem.h"
#define __unused __attribute__((__unused__))
// Choose MIPS arch variant following gcc flags
#if defined(__mips__) && __mips==32 && __mips_isa_rev>=2
#define mips32r2 1
#else
#define mips32r2 0
#endif
#define NOT_IMPLEMENTED() LOG_ALWAYS_FATAL("Arm instruction %s not yet implemented\n", __func__)
// ----------------------------------------------------------------------------
namespace android {
// ----------------------------------------------------------------------------
#if 0
#pragma mark -
#pragma mark ArmToMipsAssembler...
#endif
ArmToMipsAssembler::ArmToMipsAssembler(const sp<Assembly>& assembly,
char *abuf, int linesz, int instr_count)
: ARMAssemblerInterface(),
mArmDisassemblyBuffer(abuf),
mArmLineLength(linesz),
mArmInstrCount(instr_count),
mInum(0),
mAssembly(assembly)
{
mMips = new MIPSAssembler(assembly, this);
mArmPC = (uint32_t **) malloc(ARM_MAX_INSTUCTIONS * sizeof(uint32_t *));
init_conditional_labels();
}
ArmToMipsAssembler::~ArmToMipsAssembler()
{
delete mMips;
free((void *) mArmPC);
}
uint32_t* ArmToMipsAssembler::pc() const
{
return mMips->pc();
}
uint32_t* ArmToMipsAssembler::base() const
{
return mMips->base();
}
void ArmToMipsAssembler::reset()
{
cond.labelnum = 0;
mInum = 0;
mMips->reset();
}
int ArmToMipsAssembler::getCodegenArch()
{
return CODEGEN_ARCH_MIPS;
}
void ArmToMipsAssembler::comment(const char* string)
{
mMips->comment(string);
}
void ArmToMipsAssembler::label(const char* theLabel)
{
mMips->label(theLabel);
}
void ArmToMipsAssembler::disassemble(const char* name)
{
mMips->disassemble(name);
}
void ArmToMipsAssembler::init_conditional_labels()
{
int i;
for (i=0;i<99; ++i) {
sprintf(cond.label[i], "cond_%d", i);
}
}
#if 0
#pragma mark -
#pragma mark Prolog/Epilog & Generate...
#endif
void ArmToMipsAssembler::prolog()
{
mArmPC[mInum++] = pc(); // save starting PC for this instr
mMips->ADDIU(R_sp, R_sp, -(5 * 4));
mMips->SW(R_s0, R_sp, 0);
mMips->SW(R_s1, R_sp, 4);
mMips->SW(R_s2, R_sp, 8);
mMips->SW(R_s3, R_sp, 12);
mMips->SW(R_s4, R_sp, 16);
mMips->MOVE(R_v0, R_a0); // move context * passed in a0 to v0 (arm r0)
}
void ArmToMipsAssembler::epilog(uint32_t touched __unused)
{
mArmPC[mInum++] = pc(); // save starting PC for this instr
mMips->LW(R_s0, R_sp, 0);
mMips->LW(R_s1, R_sp, 4);
mMips->LW(R_s2, R_sp, 8);
mMips->LW(R_s3, R_sp, 12);
mMips->LW(R_s4, R_sp, 16);
mMips->ADDIU(R_sp, R_sp, (5 * 4));
mMips->JR(R_ra);
}
int ArmToMipsAssembler::generate(const char* name)
{
return mMips->generate(name);
}
uint32_t* ArmToMipsAssembler::pcForLabel(const char* label)
{
return mMips->pcForLabel(label);
}
//----------------------------------------------------------
#if 0
#pragma mark -
#pragma mark Addressing modes & shifters...
#endif
// do not need this for MIPS, but it is in the Interface (virtual)
int ArmToMipsAssembler::buildImmediate(
uint32_t immediate, uint32_t& rot, uint32_t& imm)
{
// for MIPS, any 32-bit immediate is OK
rot = 0;
imm = immediate;
return 0;
}
// shifters...
bool ArmToMipsAssembler::isValidImmediate(uint32_t immediate __unused)
{
// for MIPS, any 32-bit immediate is OK
return true;
}
uint32_t ArmToMipsAssembler::imm(uint32_t immediate)
{
// ALOGW("immediate value %08x at pc %08x\n", immediate, (int)pc());
amode.value = immediate;
return AMODE_IMM;
}
uint32_t ArmToMipsAssembler::reg_imm(int Rm, int type, uint32_t shift)
{
amode.reg = Rm;
amode.stype = type;
amode.value = shift;
return AMODE_REG_IMM;
}
uint32_t ArmToMipsAssembler::reg_rrx(int Rm __unused)
{
// reg_rrx mode is not used in the GLLAssember code at this time
return AMODE_UNSUPPORTED;
}
uint32_t ArmToMipsAssembler::reg_reg(int Rm __unused, int type __unused,
int Rs __unused)
{
// reg_reg mode is not used in the GLLAssember code at this time
return AMODE_UNSUPPORTED;
}
// addressing modes...
// LDR(B)/STR(B)/PLD (immediate and Rm can be negative, which indicate U=0)
uint32_t ArmToMipsAssembler::immed12_pre(int32_t immed12, int W)
{
LOG_ALWAYS_FATAL_IF(abs(immed12) >= 0x800,
"LDR(B)/STR(B)/PLD immediate too big (%08x)",
immed12);
amode.value = immed12;
amode.writeback = W;
return AMODE_IMM_12_PRE;
}
uint32_t ArmToMipsAssembler::immed12_post(int32_t immed12)
{
LOG_ALWAYS_FATAL_IF(abs(immed12) >= 0x800,
"LDR(B)/STR(B)/PLD immediate too big (%08x)",
immed12);
amode.value = immed12;
return AMODE_IMM_12_POST;
}
uint32_t ArmToMipsAssembler::reg_scale_pre(int Rm, int type,
uint32_t shift, int W)
{
LOG_ALWAYS_FATAL_IF(W | type | shift, "reg_scale_pre adv modes not yet implemented");
amode.reg = Rm;
// amode.stype = type; // more advanced modes not used in GGLAssembler yet
// amode.value = shift;
// amode.writeback = W;
return AMODE_REG_SCALE_PRE;
}
uint32_t ArmToMipsAssembler::reg_scale_post(int Rm __unused, int type __unused,
uint32_t shift __unused)
{
LOG_ALWAYS_FATAL("adr mode reg_scale_post not yet implemented\n");
return AMODE_UNSUPPORTED;
}
// LDRH/LDRSB/LDRSH/STRH (immediate and Rm can be negative, which indicate U=0)
uint32_t ArmToMipsAssembler::immed8_pre(int32_t immed8, int W __unused)
{
// uint32_t offset = abs(immed8);
LOG_ALWAYS_FATAL("adr mode immed8_pre not yet implemented\n");
LOG_ALWAYS_FATAL_IF(abs(immed8) >= 0x100,
"LDRH/LDRSB/LDRSH/STRH immediate too big (%08x)",
immed8);
return AMODE_IMM_8_PRE;
}
uint32_t ArmToMipsAssembler::immed8_post(int32_t immed8)
{
// uint32_t offset = abs(immed8);
LOG_ALWAYS_FATAL_IF(abs(immed8) >= 0x100,
"LDRH/LDRSB/LDRSH/STRH immediate too big (%08x)",
immed8);
amode.value = immed8;
return AMODE_IMM_8_POST;
}
uint32_t ArmToMipsAssembler::reg_pre(int Rm, int W)
{
LOG_ALWAYS_FATAL_IF(W, "reg_pre writeback not yet implemented");
amode.reg = Rm;
return AMODE_REG_PRE;
}
uint32_t ArmToMipsAssembler::reg_post(int Rm __unused)
{
LOG_ALWAYS_FATAL("adr mode reg_post not yet implemented\n");
return AMODE_UNSUPPORTED;
}
// ----------------------------------------------------------------------------
#if 0
#pragma mark -
#pragma mark Data Processing...
#endif
// check if the operand registers from a previous CMP or S-bit instruction
// would be overwritten by this instruction. If so, move the value to a
// safe register.
// Note that we cannot tell at _this_ instruction time if a future (conditional)
// instruction will _also_ use this value (a defect of the simple 1-pass, one-
// instruction-at-a-time translation). Therefore we must be conservative and
// save the value before it is overwritten. This costs an extra MOVE instr.
void ArmToMipsAssembler::protectConditionalOperands(int Rd)
{
if (Rd == cond.r1) {
mMips->MOVE(R_cmp, cond.r1);
cond.r1 = R_cmp;
}
if (cond.type == CMP_COND && Rd == cond.r2) {
mMips->MOVE(R_cmp2, cond.r2);
cond.r2 = R_cmp2;
}
}
// interprets the addressing mode, and generates the common code
// used by the majority of data-processing ops. Many MIPS instructions
// have a register-based form and a different immediate form. See
// opAND below for an example. (this could be inlined)
//
// this works with the imm(), reg_imm() methods above, which are directly
// called by the GLLAssembler.
// note: _signed parameter defaults to false (un-signed)
// note: tmpReg parameter defaults to 1, MIPS register AT
int ArmToMipsAssembler::dataProcAdrModes(int op, int& source, bool _signed, int tmpReg)
{
if (op < AMODE_REG) {
source = op;
return SRC_REG;
} else if (op == AMODE_IMM) {
if ((!_signed && amode.value > 0xffff)
|| (_signed && ((int)amode.value < -32768 || (int)amode.value > 32767) )) {
mMips->LUI(tmpReg, (amode.value >> 16));
if (amode.value & 0x0000ffff) {
mMips->ORI(tmpReg, tmpReg, (amode.value & 0x0000ffff));
}
source = tmpReg;
return SRC_REG;
} else {
source = amode.value;
return SRC_IMM;
}
} else if (op == AMODE_REG_IMM) {
switch (amode.stype) {
case LSL: mMips->SLL(tmpReg, amode.reg, amode.value); break;
case LSR: mMips->SRL(tmpReg, amode.reg, amode.value); break;
case ASR: mMips->SRA(tmpReg, amode.reg, amode.value); break;
case ROR: if (mips32r2) {
mMips->ROTR(tmpReg, amode.reg, amode.value);
} else {
mMips->RORIsyn(tmpReg, amode.reg, amode.value);
}
break;
}
source = tmpReg;
return SRC_REG;
} else { // adr mode RRX is not used in GGL Assembler at this time
// we are screwed, this should be exception, assert-fail or something
LOG_ALWAYS_FATAL("adr mode reg_rrx not yet implemented\n");
return SRC_ERROR;
}
}
void ArmToMipsAssembler::dataProcessing(int opcode, int cc,
int s, int Rd, int Rn, uint32_t Op2)
{
int src; // src is modified by dataProcAdrModes() - passed as int&
if (cc != AL) {
protectConditionalOperands(Rd);
// the branch tests register(s) set by prev CMP or instr with 'S' bit set
// inverse the condition to jump past this conditional instruction
ArmToMipsAssembler::B(cc^1, cond.label[++cond.labelnum]);
} else {
mArmPC[mInum++] = pc(); // save starting PC for this instr
}
switch (opcode) {
case opAND:
if (dataProcAdrModes(Op2, src) == SRC_REG) {
mMips->AND(Rd, Rn, src);
} else { // adr mode was SRC_IMM
mMips->ANDI(Rd, Rn, src);
}
break;
case opADD:
// set "signed" to true for adr modes
if (dataProcAdrModes(Op2, src, true) == SRC_REG) {
mMips->ADDU(Rd, Rn, src);
} else { // adr mode was SRC_IMM
mMips->ADDIU(Rd, Rn, src);
}
break;
case opSUB:
// set "signed" to true for adr modes
if (dataProcAdrModes(Op2, src, true) == SRC_REG) {
mMips->SUBU(Rd, Rn, src);
} else { // adr mode was SRC_IMM
mMips->SUBIU(Rd, Rn, src);
}
break;
case opEOR:
if (dataProcAdrModes(Op2, src) == SRC_REG) {
mMips->XOR(Rd, Rn, src);
} else { // adr mode was SRC_IMM
mMips->XORI(Rd, Rn, src);
}
break;
case opORR:
if (dataProcAdrModes(Op2, src) == SRC_REG) {
mMips->OR(Rd, Rn, src);
} else { // adr mode was SRC_IMM
mMips->ORI(Rd, Rn, src);
}
break;
case opBIC:
if (dataProcAdrModes(Op2, src) == SRC_IMM) {
// if we are 16-bit imnmediate, load to AT reg
mMips->ORI(R_at, 0, src);
src = R_at;
}
mMips->NOT(R_at, src);
mMips->AND(Rd, Rn, R_at);
break;
case opRSB:
if (dataProcAdrModes(Op2, src) == SRC_IMM) {
// if we are 16-bit imnmediate, load to AT reg
mMips->ORI(R_at, 0, src);
src = R_at;
}
mMips->SUBU(Rd, src, Rn); // subu with the parameters reversed
break;
case opMOV:
if (Op2 < AMODE_REG) { // op2 is reg # in this case
mMips->MOVE(Rd, Op2);
} else if (Op2 == AMODE_IMM) {
if (amode.value > 0xffff) {
mMips->LUI(Rd, (amode.value >> 16));
if (amode.value & 0x0000ffff) {
mMips->ORI(Rd, Rd, (amode.value & 0x0000ffff));
}
} else {
mMips->ORI(Rd, 0, amode.value);
}
} else if (Op2 == AMODE_REG_IMM) {
switch (amode.stype) {
case LSL: mMips->SLL(Rd, amode.reg, amode.value); break;
case LSR: mMips->SRL(Rd, amode.reg, amode.value); break;
case ASR: mMips->SRA(Rd, amode.reg, amode.value); break;
case ROR: if (mips32r2) {
mMips->ROTR(Rd, amode.reg, amode.value);
} else {
mMips->RORIsyn(Rd, amode.reg, amode.value);
}
break;
}
}
else {
// adr mode RRX is not used in GGL Assembler at this time
mMips->UNIMPL();
}
break;
case opMVN: // this is a 1's complement: NOT
if (Op2 < AMODE_REG) { // op2 is reg # in this case
mMips->NOR(Rd, Op2, 0); // NOT is NOR with 0
break;
} else if (Op2 == AMODE_IMM) {
if (amode.value > 0xffff) {
mMips->LUI(Rd, (amode.value >> 16));
if (amode.value & 0x0000ffff) {
mMips->ORI(Rd, Rd, (amode.value & 0x0000ffff));
}
} else {
mMips->ORI(Rd, 0, amode.value);
}
} else if (Op2 == AMODE_REG_IMM) {
switch (amode.stype) {
case LSL: mMips->SLL(Rd, amode.reg, amode.value); break;
case LSR: mMips->SRL(Rd, amode.reg, amode.value); break;
case ASR: mMips->SRA(Rd, amode.reg, amode.value); break;
case ROR: if (mips32r2) {
mMips->ROTR(Rd, amode.reg, amode.value);
} else {
mMips->RORIsyn(Rd, amode.reg, amode.value);
}
break;
}
}
else {
// adr mode RRX is not used in GGL Assembler at this time
mMips->UNIMPL();
}
mMips->NOR(Rd, Rd, 0); // NOT is NOR with 0
break;
case opCMP:
// Either operand of a CMP instr could get overwritten by a subsequent
// conditional instruction, which is ok, _UNLESS_ there is a _second_
// conditional instruction. Under MIPS, this requires doing the comparison
// again (SLT), and the original operands must be available. (and this
// pattern of multiple conditional instructions from same CMP _is_ used
// in GGL-Assembler)
//
// For now, if a conditional instr overwrites the operands, we will
// move them to dedicated temp regs. This is ugly, and inefficient,
// and should be optimized.
//
// WARNING: making an _Assumption_ that CMP operand regs will NOT be
// trashed by intervening NON-conditional instructions. In the general
// case this is legal, but it is NOT currently done in GGL-Assembler.
cond.type = CMP_COND;
cond.r1 = Rn;
if (dataProcAdrModes(Op2, src, false, R_cmp2) == SRC_REG) {
cond.r2 = src;
} else { // adr mode was SRC_IMM
mMips->ORI(R_cmp2, R_zero, src);
cond.r2 = R_cmp2;
}
break;
case opTST:
case opTEQ:
case opCMN:
case opADC:
case opSBC:
case opRSC:
mMips->UNIMPL(); // currently unused in GGL Assembler code
break;
}
if (cc != AL) {
mMips->label(cond.label[cond.labelnum]);
}
if (s && opcode != opCMP) {
cond.type = SBIT_COND;
cond.r1 = Rd;
}
}
#if 0
#pragma mark -
#pragma mark Multiply...
#endif
// multiply, accumulate
void ArmToMipsAssembler::MLA(int cc __unused, int s,
int Rd, int Rm, int Rs, int Rn) {
mArmPC[mInum++] = pc(); // save starting PC for this instr
mMips->MUL(R_at, Rm, Rs);
mMips->ADDU(Rd, R_at, Rn);
if (s) {
cond.type = SBIT_COND;
cond.r1 = Rd;
}
}
void ArmToMipsAssembler::MUL(int cc __unused, int s,
int Rd, int Rm, int Rs) {
mArmPC[mInum++] = pc();
mMips->MUL(Rd, Rm, Rs);
if (s) {
cond.type = SBIT_COND;
cond.r1 = Rd;
}
}
void ArmToMipsAssembler::UMULL(int cc __unused, int s,
int RdLo, int RdHi, int Rm, int Rs) {
mArmPC[mInum++] = pc();
mMips->MULT(Rm, Rs);
mMips->MFHI(RdHi);
mMips->MFLO(RdLo);
if (s) {
cond.type = SBIT_COND;
cond.r1 = RdHi; // BUG...
LOG_ALWAYS_FATAL("Condition on UMULL must be on 64-bit result\n");
}
}
void ArmToMipsAssembler::UMUAL(int cc __unused, int s,
int RdLo __unused, int RdHi, int Rm __unused, int Rs __unused) {
LOG_FATAL_IF(RdLo==Rm || RdHi==Rm || RdLo==RdHi,
"UMUAL(r%u,r%u,r%u,r%u)", RdLo,RdHi,Rm,Rs);
// *mPC++ = (cc<<28) | (1<<23) | (1<<21) | (s<<20) |
// (RdHi<<16) | (RdLo<<12) | (Rs<<8) | 0x90 | Rm;
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
if (s) {
cond.type = SBIT_COND;
cond.r1 = RdHi; // BUG...
LOG_ALWAYS_FATAL("Condition on UMULL must be on 64-bit result\n");
}
}
void ArmToMipsAssembler::SMULL(int cc __unused, int s,
int RdLo __unused, int RdHi, int Rm __unused, int Rs __unused) {
LOG_FATAL_IF(RdLo==Rm || RdHi==Rm || RdLo==RdHi,
"SMULL(r%u,r%u,r%u,r%u)", RdLo,RdHi,Rm,Rs);
// *mPC++ = (cc<<28) | (1<<23) | (1<<22) | (s<<20) |
// (RdHi<<16) | (RdLo<<12) | (Rs<<8) | 0x90 | Rm;
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
if (s) {
cond.type = SBIT_COND;
cond.r1 = RdHi; // BUG...
LOG_ALWAYS_FATAL("Condition on SMULL must be on 64-bit result\n");
}
}
void ArmToMipsAssembler::SMUAL(int cc __unused, int s,
int RdLo __unused, int RdHi, int Rm __unused, int Rs __unused) {
LOG_FATAL_IF(RdLo==Rm || RdHi==Rm || RdLo==RdHi,
"SMUAL(r%u,r%u,r%u,r%u)", RdLo,RdHi,Rm,Rs);
// *mPC++ = (cc<<28) | (1<<23) | (1<<22) | (1<<21) | (s<<20) |
// (RdHi<<16) | (RdLo<<12) | (Rs<<8) | 0x90 | Rm;
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
if (s) {
cond.type = SBIT_COND;
cond.r1 = RdHi; // BUG...
LOG_ALWAYS_FATAL("Condition on SMUAL must be on 64-bit result\n");
}
}
#if 0
#pragma mark -
#pragma mark Branches...
#endif
// branches...
void ArmToMipsAssembler::B(int cc, const char* label)
{
mArmPC[mInum++] = pc();
if (cond.type == SBIT_COND) { cond.r2 = R_zero; }
switch(cc) {
case EQ: mMips->BEQ(cond.r1, cond.r2, label); break;
case NE: mMips->BNE(cond.r1, cond.r2, label); break;
case HS: mMips->BGEU(cond.r1, cond.r2, label); break;
case LO: mMips->BLTU(cond.r1, cond.r2, label); break;
case MI: mMips->BLT(cond.r1, cond.r2, label); break;
case PL: mMips->BGE(cond.r1, cond.r2, label); break;
case HI: mMips->BGTU(cond.r1, cond.r2, label); break;
case LS: mMips->BLEU(cond.r1, cond.r2, label); break;
case GE: mMips->BGE(cond.r1, cond.r2, label); break;
case LT: mMips->BLT(cond.r1, cond.r2, label); break;
case GT: mMips->BGT(cond.r1, cond.r2, label); break;
case LE: mMips->BLE(cond.r1, cond.r2, label); break;
case AL: mMips->B(label); break;
case NV: /* B Never - no instruction */ break;
case VS:
case VC:
default:
LOG_ALWAYS_FATAL("Unsupported cc: %02x\n", cc);
break;
}
}
void ArmToMipsAssembler::BL(int cc __unused, const char* label __unused)
{
LOG_ALWAYS_FATAL("branch-and-link not supported yet\n");
mArmPC[mInum++] = pc();
}
// no use for Branches with integer PC, but they're in the Interface class ....
void ArmToMipsAssembler::B(int cc __unused, uint32_t* to_pc __unused)
{
LOG_ALWAYS_FATAL("branch to absolute PC not supported, use Label\n");
mArmPC[mInum++] = pc();
}
void ArmToMipsAssembler::BL(int cc __unused, uint32_t* to_pc __unused)
{
LOG_ALWAYS_FATAL("branch to absolute PC not supported, use Label\n");
mArmPC[mInum++] = pc();
}
void ArmToMipsAssembler::BX(int cc __unused, int Rn __unused)
{
LOG_ALWAYS_FATAL("branch to absolute PC not supported, use Label\n");
mArmPC[mInum++] = pc();
}
#if 0
#pragma mark -
#pragma mark Data Transfer...
#endif
// data transfer...
void ArmToMipsAssembler::LDR(int cc __unused, int Rd, int Rn, uint32_t offset)
{
mArmPC[mInum++] = pc();
// work-around for ARM default address mode of immed12_pre(0)
if (offset > AMODE_UNSUPPORTED) offset = 0;
switch (offset) {
case 0:
amode.value = 0;
amode.writeback = 0;
// fall thru to next case ....
case AMODE_IMM_12_PRE:
if (Rn == ARMAssemblerInterface::SP) {
Rn = R_sp; // convert LDR via Arm SP to LW via Mips SP
}
mMips->LW(Rd, Rn, amode.value);
if (amode.writeback) { // OPTIONAL writeback on pre-index mode
mMips->ADDIU(Rn, Rn, amode.value);
}
break;
case AMODE_IMM_12_POST:
if (Rn == ARMAssemblerInterface::SP) {
Rn = R_sp; // convert STR thru Arm SP to STR thru Mips SP
}
mMips->LW(Rd, Rn, 0);
mMips->ADDIU(Rn, Rn, amode.value);
break;
case AMODE_REG_SCALE_PRE:
// we only support simple base + index, no advanced modes for this one yet
mMips->ADDU(R_at, Rn, amode.reg);
mMips->LW(Rd, R_at, 0);
break;
}
}
void ArmToMipsAssembler::LDRB(int cc __unused, int Rd, int Rn, uint32_t offset)
{
mArmPC[mInum++] = pc();
// work-around for ARM default address mode of immed12_pre(0)
if (offset > AMODE_UNSUPPORTED) offset = 0;
switch (offset) {
case 0:
amode.value = 0;
amode.writeback = 0;
// fall thru to next case ....
case AMODE_IMM_12_PRE:
mMips->LBU(Rd, Rn, amode.value);
if (amode.writeback) { // OPTIONAL writeback on pre-index mode
mMips->ADDIU(Rn, Rn, amode.value);
}
break;
case AMODE_IMM_12_POST:
mMips->LBU(Rd, Rn, 0);
mMips->ADDIU(Rn, Rn, amode.value);
break;
case AMODE_REG_SCALE_PRE:
// we only support simple base + index, no advanced modes for this one yet
mMips->ADDU(R_at, Rn, amode.reg);
mMips->LBU(Rd, R_at, 0);
break;
}
}
void ArmToMipsAssembler::STR(int cc __unused, int Rd, int Rn, uint32_t offset)
{
mArmPC[mInum++] = pc();
// work-around for ARM default address mode of immed12_pre(0)
if (offset > AMODE_UNSUPPORTED) offset = 0;
switch (offset) {
case 0:
amode.value = 0;
amode.writeback = 0;
// fall thru to next case ....
case AMODE_IMM_12_PRE:
if (Rn == ARMAssemblerInterface::SP) {
Rn = R_sp; // convert STR thru Arm SP to SW thru Mips SP
}
if (amode.writeback) { // OPTIONAL writeback on pre-index mode
// If we will writeback, then update the index reg, then store.
// This correctly handles stack-push case.
mMips->ADDIU(Rn, Rn, amode.value);
mMips->SW(Rd, Rn, 0);
} else {
// No writeback so store offset by value
mMips->SW(Rd, Rn, amode.value);
}
break;
case AMODE_IMM_12_POST:
mMips->SW(Rd, Rn, 0);
mMips->ADDIU(Rn, Rn, amode.value); // post index always writes back
break;
case AMODE_REG_SCALE_PRE:
// we only support simple base + index, no advanced modes for this one yet
mMips->ADDU(R_at, Rn, amode.reg);
mMips->SW(Rd, R_at, 0);
break;
}
}
void ArmToMipsAssembler::STRB(int cc __unused, int Rd, int Rn, uint32_t offset)
{
mArmPC[mInum++] = pc();
// work-around for ARM default address mode of immed12_pre(0)
if (offset > AMODE_UNSUPPORTED) offset = 0;
switch (offset) {
case 0:
amode.value = 0;
amode.writeback = 0;
// fall thru to next case ....
case AMODE_IMM_12_PRE:
mMips->SB(Rd, Rn, amode.value);
if (amode.writeback) { // OPTIONAL writeback on pre-index mode
mMips->ADDIU(Rn, Rn, amode.value);
}
break;
case AMODE_IMM_12_POST:
mMips->SB(Rd, Rn, 0);
mMips->ADDIU(Rn, Rn, amode.value);
break;
case AMODE_REG_SCALE_PRE:
// we only support simple base + index, no advanced modes for this one yet
mMips->ADDU(R_at, Rn, amode.reg);
mMips->SB(Rd, R_at, 0);
break;
}
}
void ArmToMipsAssembler::LDRH(int cc __unused, int Rd, int Rn, uint32_t offset)
{
mArmPC[mInum++] = pc();
// work-around for ARM default address mode of immed8_pre(0)
if (offset > AMODE_UNSUPPORTED) offset = 0;
switch (offset) {
case 0:
amode.value = 0;
// fall thru to next case ....
case AMODE_IMM_8_PRE: // no support yet for writeback
mMips->LHU(Rd, Rn, amode.value);
break;
case AMODE_IMM_8_POST:
mMips->LHU(Rd, Rn, 0);
mMips->ADDIU(Rn, Rn, amode.value);
break;
case AMODE_REG_PRE:
// we only support simple base +/- index
if (amode.reg >= 0) {
mMips->ADDU(R_at, Rn, amode.reg);
} else {
mMips->SUBU(R_at, Rn, abs(amode.reg));
}
mMips->LHU(Rd, R_at, 0);
break;
}
}
void ArmToMipsAssembler::LDRSB(int cc __unused, int Rd __unused,
int Rn __unused, uint32_t offset __unused)
{
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
}
void ArmToMipsAssembler::LDRSH(int cc __unused, int Rd __unused,
int Rn __unused, uint32_t offset __unused)
{
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
}
void ArmToMipsAssembler::STRH(int cc __unused, int Rd, int Rn, uint32_t offset)
{
mArmPC[mInum++] = pc();
// work-around for ARM default address mode of immed8_pre(0)
if (offset > AMODE_UNSUPPORTED) offset = 0;
switch (offset) {
case 0:
amode.value = 0;
// fall thru to next case ....
case AMODE_IMM_8_PRE: // no support yet for writeback
mMips->SH(Rd, Rn, amode.value);
break;
case AMODE_IMM_8_POST:
mMips->SH(Rd, Rn, 0);
mMips->ADDIU(Rn, Rn, amode.value);
break;
case AMODE_REG_PRE:
// we only support simple base +/- index
if (amode.reg >= 0) {
mMips->ADDU(R_at, Rn, amode.reg);
} else {
mMips->SUBU(R_at, Rn, abs(amode.reg));
}
mMips->SH(Rd, R_at, 0);
break;
}
}
#if 0
#pragma mark -
#pragma mark Block Data Transfer...
#endif
// block data transfer...
void ArmToMipsAssembler::LDM(int cc __unused, int dir __unused,
int Rn __unused, int W __unused, uint32_t reg_list __unused)
{ // ED FD EA FA IB IA DB DA
// const uint8_t P[8] = { 1, 0, 1, 0, 1, 0, 1, 0 };
// const uint8_t U[8] = { 1, 1, 0, 0, 1, 1, 0, 0 };
// *mPC++ = (cc<<28) | (4<<25) | (uint32_t(P[dir])<<24) |
// (uint32_t(U[dir])<<23) | (1<<20) | (W<<21) | (Rn<<16) | reg_list;
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
}
void ArmToMipsAssembler::STM(int cc __unused, int dir __unused,
int Rn __unused, int W __unused, uint32_t reg_list __unused)
{ // FA EA FD ED IB IA DB DA
// const uint8_t P[8] = { 0, 1, 0, 1, 1, 0, 1, 0 };
// const uint8_t U[8] = { 0, 0, 1, 1, 1, 1, 0, 0 };
// *mPC++ = (cc<<28) | (4<<25) | (uint32_t(P[dir])<<24) |
// (uint32_t(U[dir])<<23) | (0<<20) | (W<<21) | (Rn<<16) | reg_list;
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
}
#if 0
#pragma mark -
#pragma mark Special...
#endif
// special...
void ArmToMipsAssembler::SWP(int cc __unused, int Rn __unused,
int Rd __unused, int Rm __unused) {
// *mPC++ = (cc<<28) | (2<<23) | (Rn<<16) | (Rd << 12) | 0x90 | Rm;
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
}
void ArmToMipsAssembler::SWPB(int cc __unused, int Rn __unused,
int Rd __unused, int Rm __unused) {
// *mPC++ = (cc<<28) | (2<<23) | (1<<22) | (Rn<<16) | (Rd << 12) | 0x90 | Rm;
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
}
void ArmToMipsAssembler::SWI(int cc __unused, uint32_t comment __unused) {
// *mPC++ = (cc<<28) | (0xF<<24) | comment;
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
}
#if 0
#pragma mark -
#pragma mark DSP instructions...
#endif
// DSP instructions...
void ArmToMipsAssembler::PLD(int Rn __unused, uint32_t offset) {
LOG_ALWAYS_FATAL_IF(!((offset&(1<<24)) && !(offset&(1<<21))),
"PLD only P=1, W=0");
// *mPC++ = 0xF550F000 | (Rn<<16) | offset;
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
}
void ArmToMipsAssembler::CLZ(int cc __unused, int Rd, int Rm)
{
mArmPC[mInum++] = pc();
mMips->CLZ(Rd, Rm);
}
void ArmToMipsAssembler::QADD(int cc __unused, int Rd __unused,
int Rm __unused, int Rn __unused)
{
// *mPC++ = (cc<<28) | 0x1000050 | (Rn<<16) | (Rd<<12) | Rm;
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
}
void ArmToMipsAssembler::QDADD(int cc __unused, int Rd __unused,
int Rm __unused, int Rn __unused)
{
// *mPC++ = (cc<<28) | 0x1400050 | (Rn<<16) | (Rd<<12) | Rm;
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
}
void ArmToMipsAssembler::QSUB(int cc __unused, int Rd __unused,
int Rm __unused, int Rn __unused)
{
// *mPC++ = (cc<<28) | 0x1200050 | (Rn<<16) | (Rd<<12) | Rm;
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
}
void ArmToMipsAssembler::QDSUB(int cc __unused, int Rd __unused,
int Rm __unused, int Rn __unused)
{
// *mPC++ = (cc<<28) | 0x1600050 | (Rn<<16) | (Rd<<12) | Rm;
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
}
// 16 x 16 signed multiply (like SMLAxx without the accumulate)
void ArmToMipsAssembler::SMUL(int cc __unused, int xy,
int Rd, int Rm, int Rs)
{
mArmPC[mInum++] = pc();
// the 16 bits may be in the top or bottom half of 32-bit source reg,
// as defined by the codes BB, BT, TB, TT (compressed param xy)
// where x corresponds to Rm and y to Rs
// select half-reg for Rm
if (xy & xyTB) {
// use top 16-bits
mMips->SRA(R_at, Rm, 16);
} else {
// use bottom 16, but sign-extend to 32
if (mips32r2) {
mMips->SEH(R_at, Rm);
} else {
mMips->SLL(R_at, Rm, 16);
mMips->SRA(R_at, R_at, 16);
}
}
// select half-reg for Rs
if (xy & xyBT) {
// use top 16-bits
mMips->SRA(R_at2, Rs, 16);
} else {
// use bottom 16, but sign-extend to 32
if (mips32r2) {
mMips->SEH(R_at2, Rs);
} else {
mMips->SLL(R_at2, Rs, 16);
mMips->SRA(R_at2, R_at2, 16);
}
}
mMips->MUL(Rd, R_at, R_at2);
}
// signed 32b x 16b multiple, save top 32-bits of 48-bit result
void ArmToMipsAssembler::SMULW(int cc __unused, int y,
int Rd, int Rm, int Rs)
{
mArmPC[mInum++] = pc();
// the selector yT or yB refers to reg Rs
if (y & yT) {
// zero the bottom 16-bits, with 2 shifts, it can affect result
mMips->SRL(R_at, Rs, 16);
mMips->SLL(R_at, R_at, 16);
} else {
// move low 16-bit half, to high half
mMips->SLL(R_at, Rs, 16);
}
mMips->MULT(Rm, R_at);
mMips->MFHI(Rd);
}
// 16 x 16 signed multiply, accumulate: Rd = Rm{16} * Rs{16} + Rn
void ArmToMipsAssembler::SMLA(int cc __unused, int xy,
int Rd, int Rm, int Rs, int Rn)
{
mArmPC[mInum++] = pc();
// the 16 bits may be in the top or bottom half of 32-bit source reg,
// as defined by the codes BB, BT, TB, TT (compressed param xy)
// where x corresponds to Rm and y to Rs
// select half-reg for Rm
if (xy & xyTB) {
// use top 16-bits
mMips->SRA(R_at, Rm, 16);
} else {
// use bottom 16, but sign-extend to 32
if (mips32r2) {
mMips->SEH(R_at, Rm);
} else {
mMips->SLL(R_at, Rm, 16);
mMips->SRA(R_at, R_at, 16);
}
}
// select half-reg for Rs
if (xy & xyBT) {
// use top 16-bits
mMips->SRA(R_at2, Rs, 16);
} else {
// use bottom 16, but sign-extend to 32
if (mips32r2) {
mMips->SEH(R_at2, Rs);
} else {
mMips->SLL(R_at2, Rs, 16);
mMips->SRA(R_at2, R_at2, 16);
}
}
mMips->MUL(R_at, R_at, R_at2);
mMips->ADDU(Rd, R_at, Rn);
}
void ArmToMipsAssembler::SMLAL(int cc __unused, int xy __unused,
int RdHi __unused, int RdLo __unused,
int Rs __unused, int Rm __unused)
{
// *mPC++ = (cc<<28) | 0x1400080 | (RdHi<<16) | (RdLo<<12) | (Rs<<8) | (xy<<4) | Rm;
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
}
void ArmToMipsAssembler::SMLAW(int cc __unused, int y __unused,
int Rd __unused, int Rm __unused,
int Rs __unused, int Rn __unused)
{
// *mPC++ = (cc<<28) | 0x1200080 | (Rd<<16) | (Rn<<12) | (Rs<<8) | (y<<4) | Rm;
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
}
// used by ARMv6 version of GGLAssembler::filter32
void ArmToMipsAssembler::UXTB16(int cc __unused, int Rd, int Rm, int rotate)
{
mArmPC[mInum++] = pc();
//Rd[31:16] := ZeroExtend((Rm ROR (8 * sh))[23:16]),
//Rd[15:0] := ZeroExtend((Rm ROR (8 * sh))[7:0]). sh 0-3.
mMips->ROTR(Rm, Rm, rotate * 8);
mMips->AND(Rd, Rm, 0x00FF00FF);
}
void ArmToMipsAssembler::UBFX(int cc __unused, int Rd __unused,
int Rn __unused, int lsb __unused,
int width __unused)
{
/* Placeholder for UBFX */
mArmPC[mInum++] = pc();
mMips->NOP2();
NOT_IMPLEMENTED();
}
#if 0
#pragma mark -
#pragma mark MIPS Assembler...
#endif
//**************************************************************************
//**************************************************************************
//**************************************************************************
/* mips assembler
** this is a subset of mips32r2, targeted specifically at ARM instruction
** replacement in the pixelflinger/codeflinger code.
**
** To that end, there is no need for floating point, or priviledged
** instructions. This all runs in user space, no float.
**
** The syntax makes no attempt to be as complete as the assember, with
** synthetic instructions, and automatic recognition of immedate operands
** (use the immediate form of the instruction), etc.
**
** We start with mips32r1, and may add r2 and dsp extensions if cpu
** supports. Decision will be made at compile time, based on gcc
** options. (makes sense since android will be built for a a specific
** device)
*/
MIPSAssembler::MIPSAssembler(const sp<Assembly>& assembly, ArmToMipsAssembler *parent)
: mParent(parent),
mAssembly(assembly)
{
mBase = mPC = (uint32_t *)assembly->base();
mDuration = ggl_system_time();
}
MIPSAssembler::MIPSAssembler(void* assembly)
: mParent(NULL), mAssembly(NULL)
{
mBase = mPC = (uint32_t *)assembly;
}
MIPSAssembler::~MIPSAssembler()
{
}
uint32_t* MIPSAssembler::pc() const
{
return mPC;
}
uint32_t* MIPSAssembler::base() const
{
return mBase;
}
void MIPSAssembler::reset()
{
mBase = mPC = (uint32_t *)mAssembly->base();
mBranchTargets.clear();
mLabels.clear();
mLabelsInverseMapping.clear();
mComments.clear();
}
// convert tabs to spaces, and remove any newline
// works with strings of limited size (makes a temp copy)
#define TABSTOP 8
void MIPSAssembler::string_detab(char *s)
{
char *os = s;
char temp[100];
char *t = temp;
int len = 99;
int i = TABSTOP;
while (*s && len-- > 0) {
if (*s == '\n') { s++; continue; }
if (*s == '\t') {
s++;
for ( ; i>0; i--) {*t++ = ' '; len--; }
} else {
*t++ = *s++;
}
if (i <= 0) i = TABSTOP;
i--;
}
*t = '\0';
strcpy(os, temp);
}
void MIPSAssembler::string_pad(char *s, int padded_len)
{
int len = strlen(s);
s += len;
for (int i = padded_len - len; i > 0; --i) {
*s++ = ' ';
}
*s = '\0';
}
// ----------------------------------------------------------------------------
void MIPSAssembler::disassemble(const char* name)
{
char di_buf[140];
if (name) {
ALOGW("%s:\n", name);
}
bool arm_disasm_fmt = (mParent->mArmDisassemblyBuffer == NULL) ? false : true;
typedef char dstr[40];
dstr *lines = (dstr *)mParent->mArmDisassemblyBuffer;
if (mParent->mArmDisassemblyBuffer != NULL) {
for (int i=0; i<mParent->mArmInstrCount; ++i) {
string_detab(lines[i]);
}
}
size_t count = pc()-base();
uint32_t* mipsPC = base();
while (count--) {
ssize_t label = mLabelsInverseMapping.indexOfKey(mipsPC);
if (label >= 0) {
ALOGW("%s:\n", mLabelsInverseMapping.valueAt(label));
}
ssize_t comment = mComments.indexOfKey(mipsPC);
if (comment >= 0) {
ALOGW("; %s\n", mComments.valueAt(comment));
}
// ALOGW("%08x: %08x ", int(i), int(i[0]));
::mips_disassem(mipsPC, di_buf, arm_disasm_fmt);
string_detab(di_buf);
string_pad(di_buf, 30);
ALOGW("0x%p: %08x %s", mipsPC, uint32_t(*mipsPC), di_buf);
mipsPC++;
}
}
void MIPSAssembler::comment(const char* string)
{
mComments.add(pc(), string);
}
void MIPSAssembler::label(const char* theLabel)
{
mLabels.add(theLabel, pc());
mLabelsInverseMapping.add(pc(), theLabel);
}
void MIPSAssembler::prolog()
{
// empty - done in ArmToMipsAssembler
}
void MIPSAssembler::epilog(uint32_t touched __unused)
{
// empty - done in ArmToMipsAssembler
}
int MIPSAssembler::generate(const char* name)
{
// fixup all the branches
size_t count = mBranchTargets.size();
while (count--) {
const branch_target_t& bt = mBranchTargets[count];
uint32_t* target_pc = mLabels.valueFor(bt.label);
LOG_ALWAYS_FATAL_IF(!target_pc,
"error resolving branch targets, target_pc is null");
int32_t offset = int32_t(target_pc - (bt.pc+1));
*bt.pc |= offset & 0x00FFFF;
}
mAssembly->resize( int(pc()-base())*4 );
// the instruction & data caches are flushed by CodeCache
const int64_t duration = ggl_system_time() - mDuration;
const char * const format = "generated %s (%d ins) at [%p:%p] in %" PRId64 " ns\n";
ALOGI(format, name, int(pc()-base()), base(), pc(), duration);
char value[PROPERTY_VALUE_MAX];
value[0] = '\0';
property_get("debug.pf.disasm", value, "0");
if (atoi(value) != 0) {
disassemble(name);
}
return NO_ERROR;
}
uint32_t* MIPSAssembler::pcForLabel(const char* label)
{
return mLabels.valueFor(label);
}
#if 0
#pragma mark -
#pragma mark Arithmetic...
#endif
void MIPSAssembler::ADDU(int Rd, int Rs, int Rt)
{
*mPC++ = (spec_op<<OP_SHF) | (addu_fn<<FUNC_SHF)
| (Rs<<RS_SHF) | (Rt<<RT_SHF) | (Rd<<RD_SHF);
}
// MD00086 pdf says this is: ADDIU rt, rs, imm -- they do not use Rd
void MIPSAssembler::ADDIU(int Rt, int Rs, int16_t imm)
{
*mPC++ = (addiu_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | (imm & MSK_16);
}
void MIPSAssembler::SUBU(int Rd, int Rs, int Rt)
{
*mPC++ = (spec_op<<OP_SHF) | (subu_fn<<FUNC_SHF) |
(Rs<<RS_SHF) | (Rt<<RT_SHF) | (Rd<<RD_SHF) ;
}
void MIPSAssembler::SUBIU(int Rt, int Rs, int16_t imm) // really addiu(d, s, -j)
{
*mPC++ = (addiu_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | ((-imm) & MSK_16);
}
void MIPSAssembler::NEGU(int Rd, int Rs) // really subu(d, zero, s)
{
MIPSAssembler::SUBU(Rd, 0, Rs);
}
void MIPSAssembler::MUL(int Rd, int Rs, int Rt)
{
*mPC++ = (spec2_op<<OP_SHF) | (mul_fn<<FUNC_SHF) |
(Rs<<RS_SHF) | (Rt<<RT_SHF) | (Rd<<RD_SHF) ;
}
void MIPSAssembler::MULT(int Rs, int Rt) // dest is hi,lo
{
*mPC++ = (spec_op<<OP_SHF) | (mult_fn<<FUNC_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF);
}
void MIPSAssembler::MULTU(int Rs, int Rt) // dest is hi,lo
{
*mPC++ = (spec_op<<OP_SHF) | (multu_fn<<FUNC_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF);
}
void MIPSAssembler::MADD(int Rs, int Rt) // hi,lo = hi,lo + Rs * Rt
{
*mPC++ = (spec2_op<<OP_SHF) | (madd_fn<<FUNC_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF);
}
void MIPSAssembler::MADDU(int Rs, int Rt) // hi,lo = hi,lo + Rs * Rt
{
*mPC++ = (spec2_op<<OP_SHF) | (maddu_fn<<FUNC_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF);
}
void MIPSAssembler::MSUB(int Rs, int Rt) // hi,lo = hi,lo - Rs * Rt
{
*mPC++ = (spec2_op<<OP_SHF) | (msub_fn<<FUNC_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF);
}
void MIPSAssembler::MSUBU(int Rs, int Rt) // hi,lo = hi,lo - Rs * Rt
{
*mPC++ = (spec2_op<<OP_SHF) | (msubu_fn<<FUNC_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF);
}
void MIPSAssembler::SEB(int Rd, int Rt) // sign-extend byte (mips32r2)
{
*mPC++ = (spec3_op<<OP_SHF) | (bshfl_fn<<FUNC_SHF) | (seb_fn << SA_SHF) |
(Rt<<RT_SHF) | (Rd<<RD_SHF);
}
void MIPSAssembler::SEH(int Rd, int Rt) // sign-extend half-word (mips32r2)
{
*mPC++ = (spec3_op<<OP_SHF) | (bshfl_fn<<FUNC_SHF) | (seh_fn << SA_SHF) |
(Rt<<RT_SHF) | (Rd<<RD_SHF);
}
#if 0
#pragma mark -
#pragma mark Comparisons...
#endif
void MIPSAssembler::SLT(int Rd, int Rs, int Rt)
{
*mPC++ = (spec_op<<OP_SHF) | (slt_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
}
void MIPSAssembler::SLTI(int Rt, int Rs, int16_t imm)
{
*mPC++ = (slti_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | (imm & MSK_16);
}
void MIPSAssembler::SLTU(int Rd, int Rs, int Rt)
{
*mPC++ = (spec_op<<OP_SHF) | (sltu_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
}
void MIPSAssembler::SLTIU(int Rt, int Rs, int16_t imm)
{
*mPC++ = (sltiu_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | (imm & MSK_16);
}
#if 0
#pragma mark -
#pragma mark Logical...
#endif
void MIPSAssembler::AND(int Rd, int Rs, int Rt)
{
*mPC++ = (spec_op<<OP_SHF) | (and_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
}
void MIPSAssembler::ANDI(int Rt, int Rs, uint16_t imm) // todo: support larger immediate
{
*mPC++ = (andi_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | (imm & MSK_16);
}
void MIPSAssembler::OR(int Rd, int Rs, int Rt)
{
*mPC++ = (spec_op<<OP_SHF) | (or_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
}
void MIPSAssembler::ORI(int Rt, int Rs, uint16_t imm)
{
*mPC++ = (ori_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | (imm & MSK_16);
}
void MIPSAssembler::NOR(int Rd, int Rs, int Rt)
{
*mPC++ = (spec_op<<OP_SHF) | (nor_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
}
void MIPSAssembler::NOT(int Rd, int Rs)
{
MIPSAssembler::NOR(Rd, Rs, 0); // NOT(d,s) = NOR(d,s,zero)
}
void MIPSAssembler::XOR(int Rd, int Rs, int Rt)
{
*mPC++ = (spec_op<<OP_SHF) | (xor_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
}
void MIPSAssembler::XORI(int Rt, int Rs, uint16_t imm) // todo: support larger immediate
{
*mPC++ = (xori_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | (imm & MSK_16);
}
void MIPSAssembler::SLL(int Rd, int Rt, int shft)
{
*mPC++ = (spec_op<<OP_SHF) | (sll_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rt<<RT_SHF) | (shft<<RE_SHF);
}
void MIPSAssembler::SLLV(int Rd, int Rt, int Rs)
{
*mPC++ = (spec_op<<OP_SHF) | (sllv_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
}
void MIPSAssembler::SRL(int Rd, int Rt, int shft)
{
*mPC++ = (spec_op<<OP_SHF) | (srl_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rt<<RT_SHF) | (shft<<RE_SHF);
}
void MIPSAssembler::SRLV(int Rd, int Rt, int Rs)
{
*mPC++ = (spec_op<<OP_SHF) | (srlv_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
}
void MIPSAssembler::SRA(int Rd, int Rt, int shft)
{
*mPC++ = (spec_op<<OP_SHF) | (sra_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rt<<RT_SHF) | (shft<<RE_SHF);
}
void MIPSAssembler::SRAV(int Rd, int Rt, int Rs)
{
*mPC++ = (spec_op<<OP_SHF) | (srav_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
}
void MIPSAssembler::ROTR(int Rd, int Rt, int shft) // mips32r2
{
// note weird encoding (SRL + 1)
*mPC++ = (spec_op<<OP_SHF) | (srl_fn<<FUNC_SHF) |
(1<<RS_SHF) | (Rd<<RD_SHF) | (Rt<<RT_SHF) | (shft<<RE_SHF);
}
void MIPSAssembler::ROTRV(int Rd, int Rt, int Rs) // mips32r2
{
// note weird encoding (SRLV + 1)
*mPC++ = (spec_op<<OP_SHF) | (srlv_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF) | (1<<RE_SHF);
}
// uses at2 register (mapped to some appropriate mips reg)
void MIPSAssembler::RORsyn(int Rd, int Rt, int Rs)
{
// synthetic: d = t rotated by s
MIPSAssembler::NEGU(R_at2, Rs);
MIPSAssembler::SLLV(R_at2, Rt, R_at2);
MIPSAssembler::SRLV(Rd, Rt, Rs);
MIPSAssembler::OR(Rd, Rd, R_at2);
}
// immediate version - uses at2 register (mapped to some appropriate mips reg)
void MIPSAssembler::RORIsyn(int Rd, int Rt, int rot)
{
// synthetic: d = t rotated by immed rot
// d = s >> rot | s << (32-rot)
MIPSAssembler::SLL(R_at2, Rt, 32-rot);
MIPSAssembler::SRL(Rd, Rt, rot);
MIPSAssembler::OR(Rd, Rd, R_at2);
}
void MIPSAssembler::CLO(int Rd, int Rs)
{
// Rt field must have same gpr # as Rd
*mPC++ = (spec2_op<<OP_SHF) | (clo_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rd<<RT_SHF);
}
void MIPSAssembler::CLZ(int Rd, int Rs)
{
// Rt field must have same gpr # as Rd
*mPC++ = (spec2_op<<OP_SHF) | (clz_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rd<<RT_SHF);
}
void MIPSAssembler::WSBH(int Rd, int Rt) // mips32r2
{
*mPC++ = (spec3_op<<OP_SHF) | (bshfl_fn<<FUNC_SHF) | (wsbh_fn << SA_SHF) |
(Rt<<RT_SHF) | (Rd<<RD_SHF);
}
#if 0
#pragma mark -
#pragma mark Load/store...
#endif
void MIPSAssembler::LW(int Rt, int Rbase, int16_t offset)
{
*mPC++ = (lw_op<<OP_SHF) | (Rbase<<RS_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
}
void MIPSAssembler::SW(int Rt, int Rbase, int16_t offset)
{
*mPC++ = (sw_op<<OP_SHF) | (Rbase<<RS_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
}
// lb is sign-extended
void MIPSAssembler::LB(int Rt, int Rbase, int16_t offset)
{
*mPC++ = (lb_op<<OP_SHF) | (Rbase<<RS_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
}
void MIPSAssembler::LBU(int Rt, int Rbase, int16_t offset)
{
*mPC++ = (lbu_op<<OP_SHF) | (Rbase<<RS_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
}
void MIPSAssembler::SB(int Rt, int Rbase, int16_t offset)
{
*mPC++ = (sb_op<<OP_SHF) | (Rbase<<RS_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
}
// lh is sign-extended
void MIPSAssembler::LH(int Rt, int Rbase, int16_t offset)
{
*mPC++ = (lh_op<<OP_SHF) | (Rbase<<RS_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
}
void MIPSAssembler::LHU(int Rt, int Rbase, int16_t offset)
{
*mPC++ = (lhu_op<<OP_SHF) | (Rbase<<RS_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
}
void MIPSAssembler::SH(int Rt, int Rbase, int16_t offset)
{
*mPC++ = (sh_op<<OP_SHF) | (Rbase<<RS_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
}
void MIPSAssembler::LUI(int Rt, int16_t offset)
{
*mPC++ = (lui_op<<OP_SHF) | (Rt<<RT_SHF) | (offset & MSK_16);
}
#if 0
#pragma mark -
#pragma mark Register move...
#endif
void MIPSAssembler::MOVE(int Rd, int Rs)
{
// encoded as "or rd, rs, zero"
*mPC++ = (spec_op<<OP_SHF) | (or_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rs<<RS_SHF) | (0<<RT_SHF);
}
void MIPSAssembler::MOVN(int Rd, int Rs, int Rt)
{
*mPC++ = (spec_op<<OP_SHF) | (movn_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
}
void MIPSAssembler::MOVZ(int Rd, int Rs, int Rt)
{
*mPC++ = (spec_op<<OP_SHF) | (movz_fn<<FUNC_SHF) |
(Rd<<RD_SHF) | (Rs<<RS_SHF) | (Rt<<RT_SHF);
}
void MIPSAssembler::MFHI(int Rd)
{
*mPC++ = (spec_op<<OP_SHF) | (mfhi_fn<<FUNC_SHF) | (Rd<<RD_SHF);
}
void MIPSAssembler::MFLO(int Rd)
{
*mPC++ = (spec_op<<OP_SHF) | (mflo_fn<<FUNC_SHF) | (Rd<<RD_SHF);
}
void MIPSAssembler::MTHI(int Rs)
{
*mPC++ = (spec_op<<OP_SHF) | (mthi_fn<<FUNC_SHF) | (Rs<<RS_SHF);
}
void MIPSAssembler::MTLO(int Rs)
{
*mPC++ = (spec_op<<OP_SHF) | (mtlo_fn<<FUNC_SHF) | (Rs<<RS_SHF);
}
#if 0
#pragma mark -
#pragma mark Branch...
#endif
// temporarily forcing a NOP into branch-delay slot, just to be safe
// todo: remove NOP, optimze use of delay slots
void MIPSAssembler::B(const char* label)
{
mBranchTargets.add(branch_target_t(label, mPC));
// encoded as BEQ zero, zero, offset
*mPC++ = (beq_op<<OP_SHF) | (0<<RT_SHF)
| (0<<RS_SHF) | 0; // offset filled in later
MIPSAssembler::NOP();
}
void MIPSAssembler::BEQ(int Rs, int Rt, const char* label)
{
mBranchTargets.add(branch_target_t(label, mPC));
*mPC++ = (beq_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | 0;
MIPSAssembler::NOP();
}
void MIPSAssembler::BNE(int Rs, int Rt, const char* label)
{
mBranchTargets.add(branch_target_t(label, mPC));
*mPC++ = (bne_op<<OP_SHF) | (Rt<<RT_SHF) | (Rs<<RS_SHF) | 0;
MIPSAssembler::NOP();
}
void MIPSAssembler::BLEZ(int Rs, const char* label)
{
mBranchTargets.add(branch_target_t(label, mPC));
*mPC++ = (blez_op<<OP_SHF) | (0<<RT_SHF) | (Rs<<RS_SHF) | 0;
MIPSAssembler::NOP();
}
void MIPSAssembler::BLTZ(int Rs, const char* label)
{
mBranchTargets.add(branch_target_t(label, mPC));
*mPC++ = (regimm_op<<OP_SHF) | (bltz_fn<<RT_SHF) | (Rs<<RS_SHF) | 0;
MIPSAssembler::NOP();
}
void MIPSAssembler::BGTZ(int Rs, const char* label)
{
mBranchTargets.add(branch_target_t(label, mPC));
*mPC++ = (bgtz_op<<OP_SHF) | (0<<RT_SHF) | (Rs<<RS_SHF) | 0;
MIPSAssembler::NOP();
}
void MIPSAssembler::BGEZ(int Rs, const char* label)
{
mBranchTargets.add(branch_target_t(label, mPC));
*mPC++ = (regimm_op<<OP_SHF) | (bgez_fn<<RT_SHF) | (Rs<<RS_SHF) | 0;
MIPSAssembler::NOP();
}
void MIPSAssembler::JR(int Rs)
{
*mPC++ = (spec_op<<OP_SHF) | (Rs<<RS_SHF) | (jr_fn << FUNC_SHF);
MIPSAssembler::NOP();
}
#if 0
#pragma mark -
#pragma mark Synthesized Branch...
#endif
// synthetic variants of branches (using slt & friends)
void MIPSAssembler::BEQZ(int Rs, const char* label)
{
BEQ(Rs, R_zero, label);
}
void MIPSAssembler::BNEZ(int Rs __unused, const char* label)
{
BNE(R_at, R_zero, label);
}
void MIPSAssembler::BGE(int Rs, int Rt, const char* label)
{
SLT(R_at, Rs, Rt);
BEQ(R_at, R_zero, label);
}
void MIPSAssembler::BGEU(int Rs, int Rt, const char* label)
{
SLTU(R_at, Rs, Rt);
BEQ(R_at, R_zero, label);
}
void MIPSAssembler::BGT(int Rs, int Rt, const char* label)
{
SLT(R_at, Rt, Rs); // rev
BNE(R_at, R_zero, label);
}
void MIPSAssembler::BGTU(int Rs, int Rt, const char* label)
{
SLTU(R_at, Rt, Rs); // rev
BNE(R_at, R_zero, label);
}
void MIPSAssembler::BLE(int Rs, int Rt, const char* label)
{
SLT(R_at, Rt, Rs); // rev
BEQ(R_at, R_zero, label);
}
void MIPSAssembler::BLEU(int Rs, int Rt, const char* label)
{
SLTU(R_at, Rt, Rs); // rev
BEQ(R_at, R_zero, label);
}
void MIPSAssembler::BLT(int Rs, int Rt, const char* label)
{
SLT(R_at, Rs, Rt);
BNE(R_at, R_zero, label);
}
void MIPSAssembler::BLTU(int Rs, int Rt, const char* label)
{
SLTU(R_at, Rs, Rt);
BNE(R_at, R_zero, label);
}
#if 0
#pragma mark -
#pragma mark Misc...
#endif
void MIPSAssembler::NOP(void)
{
// encoded as "sll zero, zero, 0", which is all zero
*mPC++ = (spec_op<<OP_SHF) | (sll_fn<<FUNC_SHF);
}
// using this as special opcode for not-yet-implemented ARM instruction
void MIPSAssembler::NOP2(void)
{
// encoded as "sll zero, zero, 2", still a nop, but a unique code
*mPC++ = (spec_op<<OP_SHF) | (sll_fn<<FUNC_SHF) | (2 << RE_SHF);
}
// using this as special opcode for purposefully NOT implemented ARM instruction
void MIPSAssembler::UNIMPL(void)
{
// encoded as "sll zero, zero, 3", still a nop, but a unique code
*mPC++ = (spec_op<<OP_SHF) | (sll_fn<<FUNC_SHF) | (3 << RE_SHF);
}
}; // namespace android: