| /* | |
| * Copyright (C) 2007 The Android Open Source Project | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); | |
| * you may not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| #include "devices.h" | |
| #include <errno.h> | |
| #include <fnmatch.h> | |
| #include <sys/sysmacros.h> | |
| #include <unistd.h> | |
| #include <chrono> | |
| #include <map> | |
| #include <memory> | |
| #include <string> | |
| #include <thread> | |
| #include <android-base/chrono_utils.h> | |
| #include <android-base/file.h> | |
| #include <android-base/logging.h> | |
| #include <android-base/stringprintf.h> | |
| #include <android-base/strings.h> | |
| #include <private/android_filesystem_config.h> | |
| #include <selinux/android.h> | |
| #include <selinux/selinux.h> | |
| #include "selinux.h" | |
| #include "util.h" | |
| #ifdef _INIT_INIT_H | |
| #error "Do not include init.h in files used by ueventd; it will expose init's globals" | |
| #endif | |
| using namespace std::chrono_literals; | |
| using android::base::Basename; | |
| using android::base::Dirname; | |
| using android::base::ReadFileToString; | |
| using android::base::Readlink; | |
| using android::base::Realpath; | |
| using android::base::StartsWith; | |
| using android::base::StringPrintf; | |
| using android::base::Trim; | |
| namespace android { | |
| namespace init { | |
| /* Given a path that may start with a PCI device, populate the supplied buffer | |
| * with the PCI domain/bus number and the peripheral ID and return 0. | |
| * If it doesn't start with a PCI device, or there is some error, return -1 */ | |
| static bool FindPciDevicePrefix(const std::string& path, std::string* result) { | |
| result->clear(); | |
| if (!StartsWith(path, "/devices/pci")) return false; | |
| /* Beginning of the prefix is the initial "pci" after "/devices/" */ | |
| std::string::size_type start = 9; | |
| /* End of the prefix is two path '/' later, capturing the domain/bus number | |
| * and the peripheral ID. Example: pci0000:00/0000:00:1f.2 */ | |
| auto end = path.find('/', start); | |
| if (end == std::string::npos) return false; | |
| end = path.find('/', end + 1); | |
| if (end == std::string::npos) return false; | |
| auto length = end - start; | |
| if (length <= 4) { | |
| // The minimum string that will get to this check is 'pci/', which is malformed, | |
| // so return false | |
| return false; | |
| } | |
| *result = path.substr(start, length); | |
| return true; | |
| } | |
| /* Given a path that may start with a virtual block device, populate | |
| * the supplied buffer with the virtual block device ID and return 0. | |
| * If it doesn't start with a virtual block device, or there is some | |
| * error, return -1 */ | |
| static bool FindVbdDevicePrefix(const std::string& path, std::string* result) { | |
| result->clear(); | |
| if (!StartsWith(path, "/devices/vbd-")) return false; | |
| /* Beginning of the prefix is the initial "vbd-" after "/devices/" */ | |
| std::string::size_type start = 13; | |
| /* End of the prefix is one path '/' later, capturing the | |
| virtual block device ID. Example: 768 */ | |
| auto end = path.find('/', start); | |
| if (end == std::string::npos) return false; | |
| auto length = end - start; | |
| if (length == 0) return false; | |
| *result = path.substr(start, length); | |
| return true; | |
| } | |
| // Given a path that may start with a virtual dm block device, populate | |
| // the supplied buffer with the dm module's instantiated name. | |
| // If it doesn't start with a virtual block device, or there is some | |
| // error, return false. | |
| static bool FindDmDevicePartition(const std::string& path, std::string* result) { | |
| result->clear(); | |
| if (!StartsWith(path, "/devices/virtual/block/dm-")) return false; | |
| if (getpid() == 1) return false; // first_stage_init has no sepolicy needs | |
| static std::map<std::string, std::string> cache; | |
| // wait_for_file will not work, the content is also delayed ... | |
| for (android::base::Timer t; t.duration() < 200ms; std::this_thread::sleep_for(10ms)) { | |
| if (ReadFileToString("/sys" + path + "/dm/name", result) && !result->empty()) { | |
| // Got it, set cache with result, when node arrives | |
| cache[path] = *result = Trim(*result); | |
| return true; | |
| } | |
| } | |
| auto it = cache.find(path); | |
| if ((it == cache.end()) || (it->second.empty())) return false; | |
| // Return cached results, when node goes away | |
| *result = it->second; | |
| return true; | |
| } | |
| Permissions::Permissions(const std::string& name, mode_t perm, uid_t uid, gid_t gid) | |
| : name_(name), perm_(perm), uid_(uid), gid_(gid), prefix_(false), wildcard_(false) { | |
| // Set 'prefix_' or 'wildcard_' based on the below cases: | |
| // | |
| // 1) No '*' in 'name' -> Neither are set and Match() checks a given path for strict | |
| // equality with 'name' | |
| // | |
| // 2) '*' only appears as the last character in 'name' -> 'prefix'_ is set to true and | |
| // Match() checks if 'name' is a prefix of a given path. | |
| // | |
| // 3) '*' appears elsewhere -> 'wildcard_' is set to true and Match() uses fnmatch() | |
| // with FNM_PATHNAME to compare 'name' to a given path. | |
| auto wildcard_position = name_.find('*'); | |
| if (wildcard_position != std::string::npos) { | |
| if (wildcard_position == name_.length() - 1) { | |
| prefix_ = true; | |
| name_.pop_back(); | |
| } else { | |
| wildcard_ = true; | |
| } | |
| } | |
| } | |
| bool Permissions::Match(const std::string& path) const { | |
| if (prefix_) return StartsWith(path, name_); | |
| if (wildcard_) return fnmatch(name_.c_str(), path.c_str(), FNM_PATHNAME) == 0; | |
| return path == name_; | |
| } | |
| bool SysfsPermissions::MatchWithSubsystem(const std::string& path, | |
| const std::string& subsystem) const { | |
| std::string path_basename = Basename(path); | |
| if (name().find(subsystem) != std::string::npos) { | |
| if (Match("/sys/class/" + subsystem + "/" + path_basename)) return true; | |
| if (Match("/sys/bus/" + subsystem + "/devices/" + path_basename)) return true; | |
| } | |
| return Match(path); | |
| } | |
| void SysfsPermissions::SetPermissions(const std::string& path) const { | |
| std::string attribute_file = path + "/" + attribute_; | |
| LOG(VERBOSE) << "fixup " << attribute_file << " " << uid() << " " << gid() << " " << std::oct | |
| << perm(); | |
| if (access(attribute_file.c_str(), F_OK) == 0) { | |
| if (chown(attribute_file.c_str(), uid(), gid()) != 0) { | |
| PLOG(ERROR) << "chown(" << attribute_file << ", " << uid() << ", " << gid() | |
| << ") failed"; | |
| } | |
| if (chmod(attribute_file.c_str(), perm()) != 0) { | |
| PLOG(ERROR) << "chmod(" << attribute_file << ", " << perm() << ") failed"; | |
| } | |
| } | |
| } | |
| // Given a path that may start with a platform device, find the parent platform device by finding a | |
| // parent directory with a 'subsystem' symlink that points to the platform bus. | |
| // If it doesn't start with a platform device, return false | |
| bool DeviceHandler::FindPlatformDevice(std::string path, std::string* platform_device_path) const { | |
| platform_device_path->clear(); | |
| // Uevents don't contain the mount point, so we need to add it here. | |
| path.insert(0, sysfs_mount_point_); | |
| std::string directory = Dirname(path); | |
| while (directory != "/" && directory != ".") { | |
| std::string subsystem_link_path; | |
| if (Realpath(directory + "/subsystem", &subsystem_link_path) && | |
| subsystem_link_path == sysfs_mount_point_ + "/bus/platform") { | |
| // We need to remove the mount point that we added above before returning. | |
| directory.erase(0, sysfs_mount_point_.size()); | |
| *platform_device_path = directory; | |
| return true; | |
| } | |
| auto last_slash = path.rfind('/'); | |
| if (last_slash == std::string::npos) return false; | |
| path.erase(last_slash); | |
| directory = Dirname(path); | |
| } | |
| return false; | |
| } | |
| void DeviceHandler::FixupSysPermissions(const std::string& upath, | |
| const std::string& subsystem) const { | |
| // upaths omit the "/sys" that paths in this list | |
| // contain, so we prepend it... | |
| std::string path = "/sys" + upath; | |
| for (const auto& s : sysfs_permissions_) { | |
| if (s.MatchWithSubsystem(path, subsystem)) s.SetPermissions(path); | |
| } | |
| if (!skip_restorecon_ && access(path.c_str(), F_OK) == 0) { | |
| LOG(VERBOSE) << "restorecon_recursive: " << path; | |
| if (selinux_android_restorecon(path.c_str(), SELINUX_ANDROID_RESTORECON_RECURSE) != 0) { | |
| PLOG(ERROR) << "selinux_android_restorecon(" << path << ") failed"; | |
| } | |
| } | |
| } | |
| std::tuple<mode_t, uid_t, gid_t> DeviceHandler::GetDevicePermissions( | |
| const std::string& path, const std::vector<std::string>& links) const { | |
| // Search the perms list in reverse so that ueventd.$hardware can override ueventd.rc. | |
| for (auto it = dev_permissions_.crbegin(); it != dev_permissions_.crend(); ++it) { | |
| if (it->Match(path) || std::any_of(links.cbegin(), links.cend(), | |
| [it](const auto& link) { return it->Match(link); })) { | |
| return {it->perm(), it->uid(), it->gid()}; | |
| } | |
| } | |
| /* Default if nothing found. */ | |
| return {0600, 0, 0}; | |
| } | |
| void DeviceHandler::MakeDevice(const std::string& path, bool block, int major, int minor, | |
| const std::vector<std::string>& links) const { | |
| auto[mode, uid, gid] = GetDevicePermissions(path, links); | |
| mode |= (block ? S_IFBLK : S_IFCHR); | |
| std::string secontext; | |
| if (!SelabelLookupFileContextBestMatch(path, links, mode, &secontext)) { | |
| PLOG(ERROR) << "Device '" << path << "' not created; cannot find SELinux label"; | |
| return; | |
| } | |
| if (!secontext.empty()) { | |
| setfscreatecon(secontext.c_str()); | |
| } | |
| dev_t dev = makedev(major, minor); | |
| /* Temporarily change egid to avoid race condition setting the gid of the | |
| * device node. Unforunately changing the euid would prevent creation of | |
| * some device nodes, so the uid has to be set with chown() and is still | |
| * racy. Fixing the gid race at least fixed the issue with system_server | |
| * opening dynamic input devices under the AID_INPUT gid. */ | |
| if (setegid(gid)) { | |
| PLOG(ERROR) << "setegid(" << gid << ") for " << path << " device failed"; | |
| goto out; | |
| } | |
| /* If the node already exists update its SELinux label to handle cases when | |
| * it was created with the wrong context during coldboot procedure. */ | |
| if (mknod(path.c_str(), mode, dev) && (errno == EEXIST) && !secontext.empty()) { | |
| char* fcon = nullptr; | |
| int rc = lgetfilecon(path.c_str(), &fcon); | |
| if (rc < 0) { | |
| PLOG(ERROR) << "Cannot get SELinux label on '" << path << "' device"; | |
| goto out; | |
| } | |
| bool different = fcon != secontext; | |
| freecon(fcon); | |
| if (different && lsetfilecon(path.c_str(), secontext.c_str())) { | |
| PLOG(ERROR) << "Cannot set '" << secontext << "' SELinux label on '" << path | |
| << "' device"; | |
| } | |
| } | |
| out: | |
| chown(path.c_str(), uid, -1); | |
| if (setegid(AID_ROOT)) { | |
| PLOG(FATAL) << "setegid(AID_ROOT) failed"; | |
| } | |
| if (!secontext.empty()) { | |
| setfscreatecon(nullptr); | |
| } | |
| } | |
| // replaces any unacceptable characters with '_', the | |
| // length of the resulting string is equal to the input string | |
| void SanitizePartitionName(std::string* string) { | |
| const char* accept = | |
| "abcdefghijklmnopqrstuvwxyz" | |
| "ABCDEFGHIJKLMNOPQRSTUVWXYZ" | |
| "0123456789" | |
| "_-."; | |
| if (!string) return; | |
| std::string::size_type pos = 0; | |
| while ((pos = string->find_first_not_of(accept, pos)) != std::string::npos) { | |
| (*string)[pos] = '_'; | |
| } | |
| } | |
| std::vector<std::string> DeviceHandler::GetBlockDeviceSymlinks(const Uevent& uevent) const { | |
| std::string device; | |
| std::string type; | |
| std::string partition; | |
| if (FindPlatformDevice(uevent.path, &device)) { | |
| // Skip /devices/platform or /devices/ if present | |
| static const std::string devices_platform_prefix = "/devices/platform/"; | |
| static const std::string devices_prefix = "/devices/"; | |
| if (StartsWith(device, devices_platform_prefix)) { | |
| device = device.substr(devices_platform_prefix.length()); | |
| } else if (StartsWith(device, devices_prefix)) { | |
| device = device.substr(devices_prefix.length()); | |
| } | |
| type = "platform"; | |
| } else if (FindPciDevicePrefix(uevent.path, &device)) { | |
| type = "pci"; | |
| } else if (FindVbdDevicePrefix(uevent.path, &device)) { | |
| type = "vbd"; | |
| } else if (FindDmDevicePartition(uevent.path, &partition)) { | |
| return {"/dev/block/mapper/" + partition}; | |
| } else { | |
| return {}; | |
| } | |
| std::vector<std::string> links; | |
| LOG(VERBOSE) << "found " << type << " device " << device; | |
| auto link_path = "/dev/block/" + type + "/" + device; | |
| bool is_boot_device = boot_devices_.find(device) != boot_devices_.end(); | |
| if (!uevent.partition_name.empty()) { | |
| std::string partition_name_sanitized(uevent.partition_name); | |
| SanitizePartitionName(&partition_name_sanitized); | |
| if (partition_name_sanitized != uevent.partition_name) { | |
| LOG(VERBOSE) << "Linking partition '" << uevent.partition_name << "' as '" | |
| << partition_name_sanitized << "'"; | |
| } | |
| links.emplace_back(link_path + "/by-name/" + partition_name_sanitized); | |
| // Adds symlink: /dev/block/by-name/<partition_name>. | |
| if (is_boot_device) { | |
| links.emplace_back("/dev/block/by-name/" + partition_name_sanitized); | |
| } | |
| } else if (is_boot_device) { | |
| // If we don't have a partition name but we are a partition on a boot device, create a | |
| // symlink of /dev/block/by-name/<device_name> for symmetry. | |
| links.emplace_back("/dev/block/by-name/" + uevent.device_name); | |
| } | |
| auto last_slash = uevent.path.rfind('/'); | |
| links.emplace_back(link_path + "/" + uevent.path.substr(last_slash + 1)); | |
| return links; | |
| } | |
| void DeviceHandler::HandleDevice(const std::string& action, const std::string& devpath, bool block, | |
| int major, int minor, const std::vector<std::string>& links) const { | |
| if (action == "add") { | |
| MakeDevice(devpath, block, major, minor, links); | |
| for (const auto& link : links) { | |
| if (!mkdir_recursive(Dirname(link), 0755)) { | |
| PLOG(ERROR) << "Failed to create directory " << Dirname(link); | |
| } | |
| if (symlink(devpath.c_str(), link.c_str())) { | |
| if (errno != EEXIST) { | |
| PLOG(ERROR) << "Failed to symlink " << devpath << " to " << link; | |
| } else if (std::string link_path; | |
| Readlink(link, &link_path) && link_path != devpath) { | |
| PLOG(ERROR) << "Failed to symlink " << devpath << " to " << link | |
| << ", which already links to: " << link_path; | |
| } | |
| } | |
| } | |
| } | |
| if (action == "remove") { | |
| for (const auto& link : links) { | |
| std::string link_path; | |
| if (Readlink(link, &link_path) && link_path == devpath) { | |
| unlink(link.c_str()); | |
| } | |
| } | |
| unlink(devpath.c_str()); | |
| } | |
| } | |
| void DeviceHandler::HandleUevent(const Uevent& uevent) { | |
| if (uevent.action == "add" || uevent.action == "change" || uevent.action == "online") { | |
| FixupSysPermissions(uevent.path, uevent.subsystem); | |
| } | |
| // if it's not a /dev device, nothing to do | |
| if (uevent.major < 0 || uevent.minor < 0) return; | |
| std::string devpath; | |
| std::vector<std::string> links; | |
| bool block = false; | |
| if (uevent.subsystem == "block") { | |
| block = true; | |
| devpath = "/dev/block/" + Basename(uevent.path); | |
| if (StartsWith(uevent.path, "/devices")) { | |
| links = GetBlockDeviceSymlinks(uevent); | |
| } | |
| } else if (const auto subsystem = | |
| std::find(subsystems_.cbegin(), subsystems_.cend(), uevent.subsystem); | |
| subsystem != subsystems_.cend()) { | |
| devpath = subsystem->ParseDevPath(uevent); | |
| } else if (uevent.subsystem == "usb") { | |
| if (!uevent.device_name.empty()) { | |
| devpath = "/dev/" + uevent.device_name; | |
| } else { | |
| // This imitates the file system that would be created | |
| // if we were using devfs instead. | |
| // Minors are broken up into groups of 128, starting at "001" | |
| int bus_id = uevent.minor / 128 + 1; | |
| int device_id = uevent.minor % 128 + 1; | |
| devpath = StringPrintf("/dev/bus/usb/%03d/%03d", bus_id, device_id); | |
| } | |
| } else if (StartsWith(uevent.subsystem, "usb")) { | |
| // ignore other USB events | |
| return; | |
| } else { | |
| devpath = "/dev/" + Basename(uevent.path); | |
| } | |
| mkdir_recursive(Dirname(devpath), 0755); | |
| HandleDevice(uevent.action, devpath, block, uevent.major, uevent.minor, links); | |
| } | |
| void DeviceHandler::ColdbootDone() { | |
| skip_restorecon_ = false; | |
| } | |
| DeviceHandler::DeviceHandler(std::vector<Permissions> dev_permissions, | |
| std::vector<SysfsPermissions> sysfs_permissions, | |
| std::vector<Subsystem> subsystems, std::set<std::string> boot_devices, | |
| bool skip_restorecon) | |
| : dev_permissions_(std::move(dev_permissions)), | |
| sysfs_permissions_(std::move(sysfs_permissions)), | |
| subsystems_(std::move(subsystems)), | |
| boot_devices_(std::move(boot_devices)), | |
| skip_restorecon_(skip_restorecon), | |
| sysfs_mount_point_("/sys") {} | |
| DeviceHandler::DeviceHandler() | |
| : DeviceHandler(std::vector<Permissions>{}, std::vector<SysfsPermissions>{}, | |
| std::vector<Subsystem>{}, std::set<std::string>{}, false) {} | |
| } // namespace init | |
| } // namespace android |