| /* | 
 |  * Copyright (C) 2012 The Android Open Source Project | 
 |  * | 
 |  * Licensed under the Apache License, Version 2.0 (the "License"); | 
 |  * you may not use this file except in compliance with the License. | 
 |  * You may obtain a copy of the License at | 
 |  * | 
 |  *      http://www.apache.org/licenses/LICENSE-2.0 | 
 |  * | 
 |  * Unless required by applicable law or agreed to in writing, software | 
 |  * distributed under the License is distributed on an "AS IS" BASIS, | 
 |  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 |  * See the License for the specific language governing permissions and | 
 |  * limitations under the License. | 
 |  */ | 
 |  | 
 | #include <stdio.h> | 
 | #include <stdlib.h> | 
 | #include <string.h> | 
 | #include <unistd.h> | 
 | #include <fcntl.h> | 
 | #include <ctype.h> | 
 | #include <sys/mount.h> | 
 | #include <sys/stat.h> | 
 | #include <errno.h> | 
 | #include <sys/types.h> | 
 | #include <sys/wait.h> | 
 | #include <libgen.h> | 
 | #include <time.h> | 
 | #include <sys/swap.h> | 
 | /* XXX These need to be obtained from kernel headers. See b/9336527 */ | 
 | #define SWAP_FLAG_PREFER        0x8000 | 
 | #define SWAP_FLAG_PRIO_MASK     0x7fff | 
 | #define SWAP_FLAG_PRIO_SHIFT    0 | 
 | #define SWAP_FLAG_DISCARD       0x10000 | 
 |  | 
 | #include <linux/loop.h> | 
 | #include <private/android_filesystem_config.h> | 
 | #include <cutils/partition_utils.h> | 
 | #include <cutils/properties.h> | 
 | #include <logwrap/logwrap.h> | 
 |  | 
 | #include "mincrypt/rsa.h" | 
 | #include "mincrypt/sha.h" | 
 | #include "mincrypt/sha256.h" | 
 |  | 
 | #include "fs_mgr_priv.h" | 
 | #include "fs_mgr_priv_verity.h" | 
 |  | 
 | #define KEY_LOC_PROP   "ro.crypto.keyfile.userdata" | 
 | #define KEY_IN_FOOTER  "footer" | 
 |  | 
 | #define E2FSCK_BIN      "/system/bin/e2fsck" | 
 | #define MKSWAP_BIN      "/system/bin/mkswap" | 
 |  | 
 | #define FSCK_LOG_FILE   "/dev/fscklogs/log" | 
 |  | 
 | #define ZRAM_CONF_DEV   "/sys/block/zram0/disksize" | 
 |  | 
 | #define ARRAY_SIZE(a) (sizeof(a) / sizeof(*(a))) | 
 |  | 
 | struct flag_list { | 
 |     const char *name; | 
 |     unsigned flag; | 
 | }; | 
 |  | 
 | static struct flag_list mount_flags[] = { | 
 |     { "noatime",    MS_NOATIME }, | 
 |     { "noexec",     MS_NOEXEC }, | 
 |     { "nosuid",     MS_NOSUID }, | 
 |     { "nodev",      MS_NODEV }, | 
 |     { "nodiratime", MS_NODIRATIME }, | 
 |     { "ro",         MS_RDONLY }, | 
 |     { "rw",         0 }, | 
 |     { "remount",    MS_REMOUNT }, | 
 |     { "bind",       MS_BIND }, | 
 |     { "rec",        MS_REC }, | 
 |     { "unbindable", MS_UNBINDABLE }, | 
 |     { "private",    MS_PRIVATE }, | 
 |     { "slave",      MS_SLAVE }, | 
 |     { "shared",     MS_SHARED }, | 
 |     { "defaults",   0 }, | 
 |     { 0,            0 }, | 
 | }; | 
 |  | 
 | static struct flag_list fs_mgr_flags[] = { | 
 |     { "wait",        MF_WAIT }, | 
 |     { "check",       MF_CHECK }, | 
 |     { "encryptable=",MF_CRYPT }, | 
 |     { "nonremovable",MF_NONREMOVABLE }, | 
 |     { "voldmanaged=",MF_VOLDMANAGED}, | 
 |     { "length=",     MF_LENGTH }, | 
 |     { "recoveryonly",MF_RECOVERYONLY }, | 
 |     { "swapprio=",   MF_SWAPPRIO }, | 
 |     { "zramsize=",   MF_ZRAMSIZE }, | 
 |     { "verify",      MF_VERIFY }, | 
 |     { "noemulatedsd", MF_NOEMULATEDSD }, | 
 |     { "defaults",    0 }, | 
 |     { 0,             0 }, | 
 | }; | 
 |  | 
 | struct fs_mgr_flag_values { | 
 |     char *key_loc; | 
 |     long long part_length; | 
 |     char *label; | 
 |     int partnum; | 
 |     int swap_prio; | 
 |     unsigned int zram_size; | 
 | }; | 
 |  | 
 | /* | 
 |  * gettime() - returns the time in seconds of the system's monotonic clock or | 
 |  * zero on error. | 
 |  */ | 
 | static time_t gettime(void) | 
 | { | 
 |     struct timespec ts; | 
 |     int ret; | 
 |  | 
 |     ret = clock_gettime(CLOCK_MONOTONIC, &ts); | 
 |     if (ret < 0) { | 
 |         ERROR("clock_gettime(CLOCK_MONOTONIC) failed: %s\n", strerror(errno)); | 
 |         return 0; | 
 |     } | 
 |  | 
 |     return ts.tv_sec; | 
 | } | 
 |  | 
 | static int wait_for_file(const char *filename, int timeout) | 
 | { | 
 |     struct stat info; | 
 |     time_t timeout_time = gettime() + timeout; | 
 |     int ret = -1; | 
 |  | 
 |     while (gettime() < timeout_time && ((ret = stat(filename, &info)) < 0)) | 
 |         usleep(10000); | 
 |  | 
 |     return ret; | 
 | } | 
 |  | 
 | static int parse_flags(char *flags, struct flag_list *fl, | 
 |                        struct fs_mgr_flag_values *flag_vals, | 
 |                        char *fs_options, int fs_options_len) | 
 | { | 
 |     int f = 0; | 
 |     int i; | 
 |     char *p; | 
 |     char *savep; | 
 |  | 
 |     /* initialize flag values.  If we find a relevant flag, we'll | 
 |      * update the value */ | 
 |     if (flag_vals) { | 
 |         memset(flag_vals, 0, sizeof(*flag_vals)); | 
 |         flag_vals->partnum = -1; | 
 |         flag_vals->swap_prio = -1; /* negative means it wasn't specified. */ | 
 |     } | 
 |  | 
 |     /* initialize fs_options to the null string */ | 
 |     if (fs_options && (fs_options_len > 0)) { | 
 |         fs_options[0] = '\0'; | 
 |     } | 
 |  | 
 |     p = strtok_r(flags, ",", &savep); | 
 |     while (p) { | 
 |         /* Look for the flag "p" in the flag list "fl" | 
 |          * If not found, the loop exits with fl[i].name being null. | 
 |          */ | 
 |         for (i = 0; fl[i].name; i++) { | 
 |             if (!strncmp(p, fl[i].name, strlen(fl[i].name))) { | 
 |                 f |= fl[i].flag; | 
 |                 if ((fl[i].flag == MF_CRYPT) && flag_vals) { | 
 |                     /* The encryptable flag is followed by an = and the | 
 |                      * location of the keys.  Get it and return it. | 
 |                      */ | 
 |                     flag_vals->key_loc = strdup(strchr(p, '=') + 1); | 
 |                 } else if ((fl[i].flag == MF_LENGTH) && flag_vals) { | 
 |                     /* The length flag is followed by an = and the | 
 |                      * size of the partition.  Get it and return it. | 
 |                      */ | 
 |                     flag_vals->part_length = strtoll(strchr(p, '=') + 1, NULL, 0); | 
 |                 } else if ((fl[i].flag == MF_VOLDMANAGED) && flag_vals) { | 
 |                     /* The voldmanaged flag is followed by an = and the | 
 |                      * label, a colon and the partition number or the | 
 |                      * word "auto", e.g. | 
 |                      *   voldmanaged=sdcard:3 | 
 |                      * Get and return them. | 
 |                      */ | 
 |                     char *label_start; | 
 |                     char *label_end; | 
 |                     char *part_start; | 
 |  | 
 |                     label_start = strchr(p, '=') + 1; | 
 |                     label_end = strchr(p, ':'); | 
 |                     if (label_end) { | 
 |                         flag_vals->label = strndup(label_start, | 
 |                                                    (int) (label_end - label_start)); | 
 |                         part_start = strchr(p, ':') + 1; | 
 |                         if (!strcmp(part_start, "auto")) { | 
 |                             flag_vals->partnum = -1; | 
 |                         } else { | 
 |                             flag_vals->partnum = strtol(part_start, NULL, 0); | 
 |                         } | 
 |                     } else { | 
 |                         ERROR("Warning: voldmanaged= flag malformed\n"); | 
 |                     } | 
 |                 } else if ((fl[i].flag == MF_SWAPPRIO) && flag_vals) { | 
 |                     flag_vals->swap_prio = strtoll(strchr(p, '=') + 1, NULL, 0); | 
 |                 } else if ((fl[i].flag == MF_ZRAMSIZE) && flag_vals) { | 
 |                     flag_vals->zram_size = strtoll(strchr(p, '=') + 1, NULL, 0); | 
 |                 } | 
 |                 break; | 
 |             } | 
 |         } | 
 |  | 
 |         if (!fl[i].name) { | 
 |             if (fs_options) { | 
 |                 /* It's not a known flag, so it must be a filesystem specific | 
 |                  * option.  Add it to fs_options if it was passed in. | 
 |                  */ | 
 |                 strlcat(fs_options, p, fs_options_len); | 
 |                 strlcat(fs_options, ",", fs_options_len); | 
 |             } else { | 
 |                 /* fs_options was not passed in, so if the flag is unknown | 
 |                  * it's an error. | 
 |                  */ | 
 |                 ERROR("Warning: unknown flag %s\n", p); | 
 |             } | 
 |         } | 
 |         p = strtok_r(NULL, ",", &savep); | 
 |     } | 
 |  | 
 | out: | 
 |     if (fs_options && fs_options[0]) { | 
 |         /* remove the last trailing comma from the list of options */ | 
 |         fs_options[strlen(fs_options) - 1] = '\0'; | 
 |     } | 
 |  | 
 |     return f; | 
 | } | 
 |  | 
 | struct fstab *fs_mgr_read_fstab(const char *fstab_path) | 
 | { | 
 |     FILE *fstab_file; | 
 |     int cnt, entries; | 
 |     ssize_t len; | 
 |     size_t alloc_len = 0; | 
 |     char *line = NULL; | 
 |     const char *delim = " \t"; | 
 |     char *save_ptr, *p; | 
 |     struct fstab *fstab = NULL; | 
 |     struct fstab_rec *recs; | 
 |     struct fs_mgr_flag_values flag_vals; | 
 | #define FS_OPTIONS_LEN 1024 | 
 |     char tmp_fs_options[FS_OPTIONS_LEN]; | 
 |  | 
 |     fstab_file = fopen(fstab_path, "r"); | 
 |     if (!fstab_file) { | 
 |         ERROR("Cannot open file %s\n", fstab_path); | 
 |         return 0; | 
 |     } | 
 |  | 
 |     entries = 0; | 
 |     while ((len = getline(&line, &alloc_len, fstab_file)) != -1) { | 
 |         /* if the last character is a newline, shorten the string by 1 byte */ | 
 |         if (line[len - 1] == '\n') { | 
 |             line[len - 1] = '\0'; | 
 |         } | 
 |         /* Skip any leading whitespace */ | 
 |         p = line; | 
 |         while (isspace(*p)) { | 
 |             p++; | 
 |         } | 
 |         /* ignore comments or empty lines */ | 
 |         if (*p == '#' || *p == '\0') | 
 |             continue; | 
 |         entries++; | 
 |     } | 
 |  | 
 |     if (!entries) { | 
 |         ERROR("No entries found in fstab\n"); | 
 |         goto err; | 
 |     } | 
 |  | 
 |     /* Allocate and init the fstab structure */ | 
 |     fstab = calloc(1, sizeof(struct fstab)); | 
 |     fstab->num_entries = entries; | 
 |     fstab->fstab_filename = strdup(fstab_path); | 
 |     fstab->recs = calloc(fstab->num_entries, sizeof(struct fstab_rec)); | 
 |  | 
 |     fseek(fstab_file, 0, SEEK_SET); | 
 |  | 
 |     cnt = 0; | 
 |     while ((len = getline(&line, &alloc_len, fstab_file)) != -1) { | 
 |         /* if the last character is a newline, shorten the string by 1 byte */ | 
 |         if (line[len - 1] == '\n') { | 
 |             line[len - 1] = '\0'; | 
 |         } | 
 |  | 
 |         /* Skip any leading whitespace */ | 
 |         p = line; | 
 |         while (isspace(*p)) { | 
 |             p++; | 
 |         } | 
 |         /* ignore comments or empty lines */ | 
 |         if (*p == '#' || *p == '\0') | 
 |             continue; | 
 |  | 
 |         /* If a non-comment entry is greater than the size we allocated, give an | 
 |          * error and quit.  This can happen in the unlikely case the file changes | 
 |          * between the two reads. | 
 |          */ | 
 |         if (cnt >= entries) { | 
 |             ERROR("Tried to process more entries than counted\n"); | 
 |             break; | 
 |         } | 
 |  | 
 |         if (!(p = strtok_r(line, delim, &save_ptr))) { | 
 |             ERROR("Error parsing mount source\n"); | 
 |             goto err; | 
 |         } | 
 |         fstab->recs[cnt].blk_device = strdup(p); | 
 |  | 
 |         if (!(p = strtok_r(NULL, delim, &save_ptr))) { | 
 |             ERROR("Error parsing mount_point\n"); | 
 |             goto err; | 
 |         } | 
 |         fstab->recs[cnt].mount_point = strdup(p); | 
 |  | 
 |         if (!(p = strtok_r(NULL, delim, &save_ptr))) { | 
 |             ERROR("Error parsing fs_type\n"); | 
 |             goto err; | 
 |         } | 
 |         fstab->recs[cnt].fs_type = strdup(p); | 
 |  | 
 |         if (!(p = strtok_r(NULL, delim, &save_ptr))) { | 
 |             ERROR("Error parsing mount_flags\n"); | 
 |             goto err; | 
 |         } | 
 |         tmp_fs_options[0] = '\0'; | 
 |         fstab->recs[cnt].flags = parse_flags(p, mount_flags, NULL, | 
 |                                        tmp_fs_options, FS_OPTIONS_LEN); | 
 |  | 
 |         /* fs_options are optional */ | 
 |         if (tmp_fs_options[0]) { | 
 |             fstab->recs[cnt].fs_options = strdup(tmp_fs_options); | 
 |         } else { | 
 |             fstab->recs[cnt].fs_options = NULL; | 
 |         } | 
 |  | 
 |         if (!(p = strtok_r(NULL, delim, &save_ptr))) { | 
 |             ERROR("Error parsing fs_mgr_options\n"); | 
 |             goto err; | 
 |         } | 
 |         fstab->recs[cnt].fs_mgr_flags = parse_flags(p, fs_mgr_flags, | 
 |                                                     &flag_vals, NULL, 0); | 
 |         fstab->recs[cnt].key_loc = flag_vals.key_loc; | 
 |         fstab->recs[cnt].length = flag_vals.part_length; | 
 |         fstab->recs[cnt].label = flag_vals.label; | 
 |         fstab->recs[cnt].partnum = flag_vals.partnum; | 
 |         fstab->recs[cnt].swap_prio = flag_vals.swap_prio; | 
 |         fstab->recs[cnt].zram_size = flag_vals.zram_size; | 
 |         cnt++; | 
 |     } | 
 |     fclose(fstab_file); | 
 |     free(line); | 
 |     return fstab; | 
 |  | 
 | err: | 
 |     fclose(fstab_file); | 
 |     free(line); | 
 |     if (fstab) | 
 |         fs_mgr_free_fstab(fstab); | 
 |     return NULL; | 
 | } | 
 |  | 
 | void fs_mgr_free_fstab(struct fstab *fstab) | 
 | { | 
 |     int i; | 
 |  | 
 |     if (!fstab) { | 
 |         return; | 
 |     } | 
 |  | 
 |     for (i = 0; i < fstab->num_entries; i++) { | 
 |         /* Free the pointers return by strdup(3) */ | 
 |         free(fstab->recs[i].blk_device); | 
 |         free(fstab->recs[i].mount_point); | 
 |         free(fstab->recs[i].fs_type); | 
 |         free(fstab->recs[i].fs_options); | 
 |         free(fstab->recs[i].key_loc); | 
 |         free(fstab->recs[i].label); | 
 |     } | 
 |  | 
 |     /* Free the fstab_recs array created by calloc(3) */ | 
 |     free(fstab->recs); | 
 |  | 
 |     /* Free the fstab filename */ | 
 |     free(fstab->fstab_filename); | 
 |  | 
 |     /* Free fstab */ | 
 |     free(fstab); | 
 | } | 
 |  | 
 | static void check_fs(char *blk_device, char *fs_type, char *target) | 
 | { | 
 |     int status; | 
 |     int ret; | 
 |     long tmpmnt_flags = MS_NOATIME | MS_NOEXEC | MS_NOSUID; | 
 |     char *tmpmnt_opts = "nomblk_io_submit,errors=remount-ro"; | 
 |     char *e2fsck_argv[] = { | 
 |         E2FSCK_BIN, | 
 |         "-y", | 
 |         blk_device | 
 |     }; | 
 |  | 
 |     /* Check for the types of filesystems we know how to check */ | 
 |     if (!strcmp(fs_type, "ext2") || !strcmp(fs_type, "ext3") || !strcmp(fs_type, "ext4")) { | 
 |         /* | 
 |          * First try to mount and unmount the filesystem.  We do this because | 
 |          * the kernel is more efficient than e2fsck in running the journal and | 
 |          * processing orphaned inodes, and on at least one device with a | 
 |          * performance issue in the emmc firmware, it can take e2fsck 2.5 minutes | 
 |          * to do what the kernel does in about a second. | 
 |          * | 
 |          * After mounting and unmounting the filesystem, run e2fsck, and if an | 
 |          * error is recorded in the filesystem superblock, e2fsck will do a full | 
 |          * check.  Otherwise, it does nothing.  If the kernel cannot mount the | 
 |          * filesytsem due to an error, e2fsck is still run to do a full check | 
 |          * fix the filesystem. | 
 |          */ | 
 |         ret = mount(blk_device, target, fs_type, tmpmnt_flags, tmpmnt_opts); | 
 |         if (!ret) { | 
 |             umount(target); | 
 |         } | 
 |  | 
 |         INFO("Running %s on %s\n", E2FSCK_BIN, blk_device); | 
 |  | 
 |         ret = android_fork_execvp_ext(ARRAY_SIZE(e2fsck_argv), e2fsck_argv, | 
 |                                       &status, true, LOG_KLOG | LOG_FILE, | 
 |                                       true, FSCK_LOG_FILE); | 
 |  | 
 |         if (ret < 0) { | 
 |             /* No need to check for error in fork, we can't really handle it now */ | 
 |             ERROR("Failed trying to run %s\n", E2FSCK_BIN); | 
 |         } | 
 |     } | 
 |  | 
 |     return; | 
 | } | 
 |  | 
 | static void remove_trailing_slashes(char *n) | 
 | { | 
 |     int len; | 
 |  | 
 |     len = strlen(n) - 1; | 
 |     while ((*(n + len) == '/') && len) { | 
 |       *(n + len) = '\0'; | 
 |       len--; | 
 |     } | 
 | } | 
 |  | 
 | /* | 
 |  * Mark the given block device as read-only, using the BLKROSET ioctl. | 
 |  * Return 0 on success, and -1 on error. | 
 |  */ | 
 | static void fs_set_blk_ro(const char *blockdev) | 
 | { | 
 |     int fd; | 
 |     int ON = 1; | 
 |  | 
 |     fd = open(blockdev, O_RDONLY); | 
 |     if (fd < 0) { | 
 |         // should never happen | 
 |         return; | 
 |     } | 
 |  | 
 |     ioctl(fd, BLKROSET, &ON); | 
 |     close(fd); | 
 | } | 
 |  | 
 | /* | 
 |  * __mount(): wrapper around the mount() system call which also | 
 |  * sets the underlying block device to read-only if the mount is read-only. | 
 |  * See "man 2 mount" for return values. | 
 |  */ | 
 | static int __mount(const char *source, const char *target, | 
 |                    const char *filesystemtype, unsigned long mountflags, | 
 |                    const void *data) | 
 | { | 
 |     int ret = mount(source, target, filesystemtype, mountflags, data); | 
 |  | 
 |     if ((ret == 0) && (mountflags & MS_RDONLY) != 0) { | 
 |         fs_set_blk_ro(source); | 
 |     } | 
 |  | 
 |     return ret; | 
 | } | 
 |  | 
 | static int fs_match(char *in1, char *in2) | 
 | { | 
 |     char *n1; | 
 |     char *n2; | 
 |     int ret; | 
 |  | 
 |     n1 = strdup(in1); | 
 |     n2 = strdup(in2); | 
 |  | 
 |     remove_trailing_slashes(n1); | 
 |     remove_trailing_slashes(n2); | 
 |  | 
 |     ret = !strcmp(n1, n2); | 
 |  | 
 |     free(n1); | 
 |     free(n2); | 
 |  | 
 |     return ret; | 
 | } | 
 |  | 
 | int fs_mgr_mount_all(struct fstab *fstab) | 
 | { | 
 |     int i = 0; | 
 |     int encrypted = 0; | 
 |     int ret = -1; | 
 |     int mret; | 
 |  | 
 |     if (!fstab) { | 
 |         return ret; | 
 |     } | 
 |  | 
 |     for (i = 0; i < fstab->num_entries; i++) { | 
 |         /* Don't mount entries that are managed by vold */ | 
 |         if (fstab->recs[i].fs_mgr_flags & (MF_VOLDMANAGED | MF_RECOVERYONLY)) { | 
 |             continue; | 
 |         } | 
 |  | 
 |         /* Skip swap and raw partition entries such as boot, recovery, etc */ | 
 |         if (!strcmp(fstab->recs[i].fs_type, "swap") || | 
 |             !strcmp(fstab->recs[i].fs_type, "emmc") || | 
 |             !strcmp(fstab->recs[i].fs_type, "mtd")) { | 
 |             continue; | 
 |         } | 
 |  | 
 |         if (fstab->recs[i].fs_mgr_flags & MF_WAIT) { | 
 |             wait_for_file(fstab->recs[i].blk_device, WAIT_TIMEOUT); | 
 |         } | 
 |  | 
 |         if (fstab->recs[i].fs_mgr_flags & MF_CHECK) { | 
 |             check_fs(fstab->recs[i].blk_device, fstab->recs[i].fs_type, | 
 |                      fstab->recs[i].mount_point); | 
 |         } | 
 |  | 
 |         if (fstab->recs[i].fs_mgr_flags & MF_VERIFY) { | 
 |             if (fs_mgr_setup_verity(&fstab->recs[i]) < 0) { | 
 |                 ERROR("Could not set up verified partition, skipping!"); | 
 |                 continue; | 
 |             } | 
 |         } | 
 |  | 
 |         mret = __mount(fstab->recs[i].blk_device, fstab->recs[i].mount_point, | 
 |                      fstab->recs[i].fs_type, fstab->recs[i].flags, | 
 |                      fstab->recs[i].fs_options); | 
 |  | 
 |         if (!mret) { | 
 |             /* Success!  Go get the next one */ | 
 |             continue; | 
 |         } | 
 |  | 
 |         /* mount(2) returned an error, check if it's encrypted and deal with it */ | 
 |         if ((fstab->recs[i].fs_mgr_flags & MF_CRYPT) && | 
 |             !partition_wiped(fstab->recs[i].blk_device)) { | 
 |             /* Need to mount a tmpfs at this mountpoint for now, and set | 
 |              * properties that vold will query later for decrypting | 
 |              */ | 
 |             if (mount("tmpfs", fstab->recs[i].mount_point, "tmpfs", | 
 |                   MS_NOATIME | MS_NOSUID | MS_NODEV, CRYPTO_TMPFS_OPTIONS) < 0) { | 
 |                 ERROR("Cannot mount tmpfs filesystem for encrypted fs at %s\n", | 
 |                         fstab->recs[i].mount_point); | 
 |                 goto out; | 
 |             } | 
 |             encrypted = 1; | 
 |         } else { | 
 |             ERROR("Cannot mount filesystem on %s at %s\n", | 
 |                     fstab->recs[i].blk_device, fstab->recs[i].mount_point); | 
 |             goto out; | 
 |         } | 
 |     } | 
 |  | 
 |     if (encrypted) { | 
 |         ret = 1; | 
 |     } else { | 
 |         ret = 0; | 
 |     } | 
 |  | 
 | out: | 
 |     return ret; | 
 | } | 
 |  | 
 | /* If tmp_mount_point is non-null, mount the filesystem there.  This is for the | 
 |  * tmp mount we do to check the user password | 
 |  */ | 
 | int fs_mgr_do_mount(struct fstab *fstab, char *n_name, char *n_blk_device, | 
 |                     char *tmp_mount_point) | 
 | { | 
 |     int i = 0; | 
 |     int ret = -1; | 
 |     char *m; | 
 |  | 
 |     if (!fstab) { | 
 |         return ret; | 
 |     } | 
 |  | 
 |     for (i = 0; i < fstab->num_entries; i++) { | 
 |         if (!fs_match(fstab->recs[i].mount_point, n_name)) { | 
 |             continue; | 
 |         } | 
 |  | 
 |         /* We found our match */ | 
 |         /* If this swap or a raw partition, report an error */ | 
 |         if (!strcmp(fstab->recs[i].fs_type, "swap") || | 
 |             !strcmp(fstab->recs[i].fs_type, "emmc") || | 
 |             !strcmp(fstab->recs[i].fs_type, "mtd")) { | 
 |             ERROR("Cannot mount filesystem of type %s on %s\n", | 
 |                   fstab->recs[i].fs_type, n_blk_device); | 
 |             goto out; | 
 |         } | 
 |  | 
 |         /* First check the filesystem if requested */ | 
 |         if (fstab->recs[i].fs_mgr_flags & MF_WAIT) { | 
 |             wait_for_file(n_blk_device, WAIT_TIMEOUT); | 
 |         } | 
 |  | 
 |         if (fstab->recs[i].fs_mgr_flags & MF_CHECK) { | 
 |             check_fs(n_blk_device, fstab->recs[i].fs_type, | 
 |                      fstab->recs[i].mount_point); | 
 |         } | 
 |  | 
 |         if (fstab->recs[i].fs_mgr_flags & MF_VERIFY) { | 
 |             if (fs_mgr_setup_verity(&fstab->recs[i]) < 0) { | 
 |                 ERROR("Could not set up verified partition, skipping!"); | 
 |                 continue; | 
 |             } | 
 |         } | 
 |  | 
 |         /* Now mount it where requested */ | 
 |         if (tmp_mount_point) { | 
 |             m = tmp_mount_point; | 
 |         } else { | 
 |             m = fstab->recs[i].mount_point; | 
 |         } | 
 |         if (__mount(n_blk_device, m, fstab->recs[i].fs_type, | 
 |                     fstab->recs[i].flags, fstab->recs[i].fs_options)) { | 
 |             ERROR("Cannot mount filesystem on %s at %s\n", | 
 |                     n_blk_device, m); | 
 |             goto out; | 
 |         } else { | 
 |             ret = 0; | 
 |             goto out; | 
 |         } | 
 |     } | 
 |  | 
 |     /* We didn't find a match, say so and return an error */ | 
 |     ERROR("Cannot find mount point %s in fstab\n", fstab->recs[i].mount_point); | 
 |  | 
 | out: | 
 |     return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * mount a tmpfs filesystem at the given point. | 
 |  * return 0 on success, non-zero on failure. | 
 |  */ | 
 | int fs_mgr_do_tmpfs_mount(char *n_name) | 
 | { | 
 |     int ret; | 
 |  | 
 |     ret = mount("tmpfs", n_name, "tmpfs", | 
 |                 MS_NOATIME | MS_NOSUID | MS_NODEV, CRYPTO_TMPFS_OPTIONS); | 
 |     if (ret < 0) { | 
 |         ERROR("Cannot mount tmpfs filesystem at %s\n", n_name); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     /* Success */ | 
 |     return 0; | 
 | } | 
 |  | 
 | int fs_mgr_unmount_all(struct fstab *fstab) | 
 | { | 
 |     int i = 0; | 
 |     int ret = 0; | 
 |  | 
 |     if (!fstab) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     while (fstab->recs[i].blk_device) { | 
 |         if (umount(fstab->recs[i].mount_point)) { | 
 |             ERROR("Cannot unmount filesystem at %s\n", fstab->recs[i].mount_point); | 
 |             ret = -1; | 
 |         } | 
 |         i++; | 
 |     } | 
 |  | 
 |     return ret; | 
 | } | 
 |  | 
 | /* This must be called after mount_all, because the mkswap command needs to be | 
 |  * available. | 
 |  */ | 
 | int fs_mgr_swapon_all(struct fstab *fstab) | 
 | { | 
 |     int i = 0; | 
 |     int flags = 0; | 
 |     int err = 0; | 
 |     int ret = 0; | 
 |     int status; | 
 |     char *mkswap_argv[2] = { | 
 |         MKSWAP_BIN, | 
 |         NULL | 
 |     }; | 
 |  | 
 |     if (!fstab) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     for (i = 0; i < fstab->num_entries; i++) { | 
 |         /* Skip non-swap entries */ | 
 |         if (strcmp(fstab->recs[i].fs_type, "swap")) { | 
 |             continue; | 
 |         } | 
 |  | 
 |         if (fstab->recs[i].zram_size > 0) { | 
 |             /* A zram_size was specified, so we need to configure the | 
 |              * device.  There is no point in having multiple zram devices | 
 |              * on a system (all the memory comes from the same pool) so | 
 |              * we can assume the device number is 0. | 
 |              */ | 
 |             FILE *zram_fp; | 
 |  | 
 |             zram_fp = fopen(ZRAM_CONF_DEV, "r+"); | 
 |             if (zram_fp == NULL) { | 
 |                 ERROR("Unable to open zram conf device " ZRAM_CONF_DEV); | 
 |                 ret = -1; | 
 |                 continue; | 
 |             } | 
 |             fprintf(zram_fp, "%d\n", fstab->recs[i].zram_size); | 
 |             fclose(zram_fp); | 
 |         } | 
 |  | 
 |         if (fstab->recs[i].fs_mgr_flags & MF_WAIT) { | 
 |             wait_for_file(fstab->recs[i].blk_device, WAIT_TIMEOUT); | 
 |         } | 
 |  | 
 |         /* Initialize the swap area */ | 
 |         mkswap_argv[1] = fstab->recs[i].blk_device; | 
 |         err = android_fork_execvp_ext(ARRAY_SIZE(mkswap_argv), mkswap_argv, | 
 |                                       &status, true, LOG_KLOG, false, NULL); | 
 |         if (err) { | 
 |             ERROR("mkswap failed for %s\n", fstab->recs[i].blk_device); | 
 |             ret = -1; | 
 |             continue; | 
 |         } | 
 |  | 
 |         /* If -1, then no priority was specified in fstab, so don't set | 
 |          * SWAP_FLAG_PREFER or encode the priority */ | 
 |         if (fstab->recs[i].swap_prio >= 0) { | 
 |             flags = (fstab->recs[i].swap_prio << SWAP_FLAG_PRIO_SHIFT) & | 
 |                     SWAP_FLAG_PRIO_MASK; | 
 |             flags |= SWAP_FLAG_PREFER; | 
 |         } else { | 
 |             flags = 0; | 
 |         } | 
 |         err = swapon(fstab->recs[i].blk_device, flags); | 
 |         if (err) { | 
 |             ERROR("swapon failed for %s\n", fstab->recs[i].blk_device); | 
 |             ret = -1; | 
 |         } | 
 |     } | 
 |  | 
 |     return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * key_loc must be at least PROPERTY_VALUE_MAX bytes long | 
 |  * | 
 |  * real_blk_device must be at least PROPERTY_VALUE_MAX bytes long | 
 |  */ | 
 | int fs_mgr_get_crypt_info(struct fstab *fstab, char *key_loc, char *real_blk_device, int size) | 
 | { | 
 |     int i = 0; | 
 |  | 
 |     if (!fstab) { | 
 |         return -1; | 
 |     } | 
 |     /* Initialize return values to null strings */ | 
 |     if (key_loc) { | 
 |         *key_loc = '\0'; | 
 |     } | 
 |     if (real_blk_device) { | 
 |         *real_blk_device = '\0'; | 
 |     } | 
 |  | 
 |     /* Look for the encryptable partition to find the data */ | 
 |     for (i = 0; i < fstab->num_entries; i++) { | 
 |         /* Don't deal with vold managed enryptable partitions here */ | 
 |         if (fstab->recs[i].fs_mgr_flags & MF_VOLDMANAGED) { | 
 |             continue; | 
 |         } | 
 |         if (!(fstab->recs[i].fs_mgr_flags & MF_CRYPT)) { | 
 |             continue; | 
 |         } | 
 |  | 
 |         /* We found a match */ | 
 |         if (key_loc) { | 
 |             strlcpy(key_loc, fstab->recs[i].key_loc, size); | 
 |         } | 
 |         if (real_blk_device) { | 
 |             strlcpy(real_blk_device, fstab->recs[i].blk_device, size); | 
 |         } | 
 |         break; | 
 |     } | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | /* Add an entry to the fstab, and return 0 on success or -1 on error */ | 
 | int fs_mgr_add_entry(struct fstab *fstab, | 
 |                      const char *mount_point, const char *fs_type, | 
 |                      const char *blk_device, long long length) | 
 | { | 
 |     struct fstab_rec *new_fstab_recs; | 
 |     int n = fstab->num_entries; | 
 |  | 
 |     new_fstab_recs = (struct fstab_rec *) | 
 |                      realloc(fstab->recs, sizeof(struct fstab_rec) * (n + 1)); | 
 |  | 
 |     if (!new_fstab_recs) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     /* A new entry was added, so initialize it */ | 
 |      memset(&new_fstab_recs[n], 0, sizeof(struct fstab_rec)); | 
 |      new_fstab_recs[n].mount_point = strdup(mount_point); | 
 |      new_fstab_recs[n].fs_type = strdup(fs_type); | 
 |      new_fstab_recs[n].blk_device = strdup(blk_device); | 
 |      new_fstab_recs[n].length = 0; | 
 |  | 
 |      /* Update the fstab struct */ | 
 |      fstab->recs = new_fstab_recs; | 
 |      fstab->num_entries++; | 
 |  | 
 |      return 0; | 
 | } | 
 |  | 
 | struct fstab_rec *fs_mgr_get_entry_for_mount_point(struct fstab *fstab, const char *path) | 
 | { | 
 |     int i; | 
 |  | 
 |     if (!fstab) { | 
 |         return NULL; | 
 |     } | 
 |  | 
 |     for (i = 0; i < fstab->num_entries; i++) { | 
 |         int len = strlen(fstab->recs[i].mount_point); | 
 |         if (strncmp(path, fstab->recs[i].mount_point, len) == 0 && | 
 |             (path[len] == '\0' || path[len] == '/')) { | 
 |             return &fstab->recs[i]; | 
 |         } | 
 |     } | 
 |  | 
 |     return NULL; | 
 | } | 
 |  | 
 | int fs_mgr_is_voldmanaged(struct fstab_rec *fstab) | 
 | { | 
 |     return fstab->fs_mgr_flags & MF_VOLDMANAGED; | 
 | } | 
 |  | 
 | int fs_mgr_is_nonremovable(struct fstab_rec *fstab) | 
 | { | 
 |     return fstab->fs_mgr_flags & MF_NONREMOVABLE; | 
 | } | 
 |  | 
 | int fs_mgr_is_encryptable(struct fstab_rec *fstab) | 
 | { | 
 |     return fstab->fs_mgr_flags & MF_CRYPT; | 
 | } | 
 |  | 
 | int fs_mgr_is_noemulatedsd(struct fstab_rec *fstab) | 
 | { | 
 |     return fstab->fs_mgr_flags & MF_NOEMULATEDSD; | 
 | } |