| /* |
| * Copyright (C) 2007 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "devices.h" |
| |
| #include <errno.h> |
| #include <fnmatch.h> |
| #include <sys/sysmacros.h> |
| #include <unistd.h> |
| |
| #include <memory> |
| |
| #include <android-base/logging.h> |
| #include <android-base/stringprintf.h> |
| #include <android-base/strings.h> |
| #include <private/android_filesystem_config.h> |
| #include <selinux/android.h> |
| #include <selinux/selinux.h> |
| |
| #include "selinux.h" |
| #include "util.h" |
| |
| #ifdef _INIT_INIT_H |
| #error "Do not include init.h in files used by ueventd; it will expose init's globals" |
| #endif |
| |
| using android::base::Basename; |
| using android::base::Dirname; |
| using android::base::Readlink; |
| using android::base::Realpath; |
| using android::base::StartsWith; |
| using android::base::StringPrintf; |
| |
| namespace android { |
| namespace init { |
| |
| /* Given a path that may start with a PCI device, populate the supplied buffer |
| * with the PCI domain/bus number and the peripheral ID and return 0. |
| * If it doesn't start with a PCI device, or there is some error, return -1 */ |
| static bool FindPciDevicePrefix(const std::string& path, std::string* result) { |
| result->clear(); |
| |
| if (!StartsWith(path, "/devices/pci")) return false; |
| |
| /* Beginning of the prefix is the initial "pci" after "/devices/" */ |
| std::string::size_type start = 9; |
| |
| /* End of the prefix is two path '/' later, capturing the domain/bus number |
| * and the peripheral ID. Example: pci0000:00/0000:00:1f.2 */ |
| auto end = path.find('/', start); |
| if (end == std::string::npos) return false; |
| |
| end = path.find('/', end + 1); |
| if (end == std::string::npos) return false; |
| |
| auto length = end - start; |
| if (length <= 4) { |
| // The minimum string that will get to this check is 'pci/', which is malformed, |
| // so return false |
| return false; |
| } |
| |
| *result = path.substr(start, length); |
| return true; |
| } |
| |
| /* Given a path that may start with a virtual block device, populate |
| * the supplied buffer with the virtual block device ID and return 0. |
| * If it doesn't start with a virtual block device, or there is some |
| * error, return -1 */ |
| static bool FindVbdDevicePrefix(const std::string& path, std::string* result) { |
| result->clear(); |
| |
| if (!StartsWith(path, "/devices/vbd-")) return false; |
| |
| /* Beginning of the prefix is the initial "vbd-" after "/devices/" */ |
| std::string::size_type start = 13; |
| |
| /* End of the prefix is one path '/' later, capturing the |
| virtual block device ID. Example: 768 */ |
| auto end = path.find('/', start); |
| if (end == std::string::npos) return false; |
| |
| auto length = end - start; |
| if (length == 0) return false; |
| |
| *result = path.substr(start, length); |
| return true; |
| } |
| |
| Permissions::Permissions(const std::string& name, mode_t perm, uid_t uid, gid_t gid) |
| : name_(name), perm_(perm), uid_(uid), gid_(gid), prefix_(false), wildcard_(false) { |
| // Set 'prefix_' or 'wildcard_' based on the below cases: |
| // |
| // 1) No '*' in 'name' -> Neither are set and Match() checks a given path for strict |
| // equality with 'name' |
| // |
| // 2) '*' only appears as the last character in 'name' -> 'prefix'_ is set to true and |
| // Match() checks if 'name' is a prefix of a given path. |
| // |
| // 3) '*' appears elsewhere -> 'wildcard_' is set to true and Match() uses fnmatch() |
| // with FNM_PATHNAME to compare 'name' to a given path. |
| |
| auto wildcard_position = name_.find('*'); |
| if (wildcard_position != std::string::npos) { |
| if (wildcard_position == name_.length() - 1) { |
| prefix_ = true; |
| name_.pop_back(); |
| } else { |
| wildcard_ = true; |
| } |
| } |
| } |
| |
| bool Permissions::Match(const std::string& path) const { |
| if (prefix_) return StartsWith(path, name_); |
| if (wildcard_) return fnmatch(name_.c_str(), path.c_str(), FNM_PATHNAME) == 0; |
| return path == name_; |
| } |
| |
| bool SysfsPermissions::MatchWithSubsystem(const std::string& path, |
| const std::string& subsystem) const { |
| std::string path_basename = Basename(path); |
| if (name().find(subsystem) != std::string::npos) { |
| if (Match("/sys/class/" + subsystem + "/" + path_basename)) return true; |
| if (Match("/sys/bus/" + subsystem + "/devices/" + path_basename)) return true; |
| } |
| return Match(path); |
| } |
| |
| void SysfsPermissions::SetPermissions(const std::string& path) const { |
| std::string attribute_file = path + "/" + attribute_; |
| LOG(VERBOSE) << "fixup " << attribute_file << " " << uid() << " " << gid() << " " << std::oct |
| << perm(); |
| |
| if (access(attribute_file.c_str(), F_OK) == 0) { |
| if (chown(attribute_file.c_str(), uid(), gid()) != 0) { |
| PLOG(ERROR) << "chown(" << attribute_file << ", " << uid() << ", " << gid() |
| << ") failed"; |
| } |
| if (chmod(attribute_file.c_str(), perm()) != 0) { |
| PLOG(ERROR) << "chmod(" << attribute_file << ", " << perm() << ") failed"; |
| } |
| } |
| } |
| |
| // Given a path that may start with a platform device, find the parent platform device by finding a |
| // parent directory with a 'subsystem' symlink that points to the platform bus. |
| // If it doesn't start with a platform device, return false |
| bool DeviceHandler::FindPlatformDevice(std::string path, std::string* platform_device_path) const { |
| platform_device_path->clear(); |
| |
| // Uevents don't contain the mount point, so we need to add it here. |
| path.insert(0, sysfs_mount_point_); |
| |
| std::string directory = Dirname(path); |
| |
| while (directory != "/" && directory != ".") { |
| std::string subsystem_link_path; |
| if (Realpath(directory + "/subsystem", &subsystem_link_path) && |
| subsystem_link_path == sysfs_mount_point_ + "/bus/platform") { |
| // We need to remove the mount point that we added above before returning. |
| directory.erase(0, sysfs_mount_point_.size()); |
| *platform_device_path = directory; |
| return true; |
| } |
| |
| auto last_slash = path.rfind('/'); |
| if (last_slash == std::string::npos) return false; |
| |
| path.erase(last_slash); |
| directory = Dirname(path); |
| } |
| |
| return false; |
| } |
| |
| void DeviceHandler::FixupSysPermissions(const std::string& upath, |
| const std::string& subsystem) const { |
| // upaths omit the "/sys" that paths in this list |
| // contain, so we prepend it... |
| std::string path = "/sys" + upath; |
| |
| for (const auto& s : sysfs_permissions_) { |
| if (s.MatchWithSubsystem(path, subsystem)) s.SetPermissions(path); |
| } |
| |
| if (!skip_restorecon_ && access(path.c_str(), F_OK) == 0) { |
| LOG(VERBOSE) << "restorecon_recursive: " << path; |
| if (selinux_android_restorecon(path.c_str(), SELINUX_ANDROID_RESTORECON_RECURSE) != 0) { |
| PLOG(ERROR) << "selinux_android_restorecon(" << path << ") failed"; |
| } |
| } |
| } |
| |
| std::tuple<mode_t, uid_t, gid_t> DeviceHandler::GetDevicePermissions( |
| const std::string& path, const std::vector<std::string>& links) const { |
| // Search the perms list in reverse so that ueventd.$hardware can override ueventd.rc. |
| for (auto it = dev_permissions_.crbegin(); it != dev_permissions_.crend(); ++it) { |
| if (it->Match(path) || std::any_of(links.cbegin(), links.cend(), |
| [it](const auto& link) { return it->Match(link); })) { |
| return {it->perm(), it->uid(), it->gid()}; |
| } |
| } |
| /* Default if nothing found. */ |
| return {0600, 0, 0}; |
| } |
| |
| void DeviceHandler::MakeDevice(const std::string& path, bool block, int major, int minor, |
| const std::vector<std::string>& links) const { |
| auto[mode, uid, gid] = GetDevicePermissions(path, links); |
| mode |= (block ? S_IFBLK : S_IFCHR); |
| |
| std::string secontext; |
| if (!SelabelLookupFileContextBestMatch(path, links, mode, &secontext)) { |
| PLOG(ERROR) << "Device '" << path << "' not created; cannot find SELinux label"; |
| return; |
| } |
| if (!secontext.empty()) { |
| setfscreatecon(secontext.c_str()); |
| } |
| |
| dev_t dev = makedev(major, minor); |
| /* Temporarily change egid to avoid race condition setting the gid of the |
| * device node. Unforunately changing the euid would prevent creation of |
| * some device nodes, so the uid has to be set with chown() and is still |
| * racy. Fixing the gid race at least fixed the issue with system_server |
| * opening dynamic input devices under the AID_INPUT gid. */ |
| if (setegid(gid)) { |
| PLOG(ERROR) << "setegid(" << gid << ") for " << path << " device failed"; |
| goto out; |
| } |
| /* If the node already exists update its SELinux label to handle cases when |
| * it was created with the wrong context during coldboot procedure. */ |
| if (mknod(path.c_str(), mode, dev) && (errno == EEXIST) && !secontext.empty()) { |
| char* fcon = nullptr; |
| int rc = lgetfilecon(path.c_str(), &fcon); |
| if (rc < 0) { |
| PLOG(ERROR) << "Cannot get SELinux label on '" << path << "' device"; |
| goto out; |
| } |
| |
| bool different = fcon != secontext; |
| freecon(fcon); |
| |
| if (different && lsetfilecon(path.c_str(), secontext.c_str())) { |
| PLOG(ERROR) << "Cannot set '" << secontext << "' SELinux label on '" << path |
| << "' device"; |
| } |
| } |
| |
| out: |
| chown(path.c_str(), uid, -1); |
| if (setegid(AID_ROOT)) { |
| PLOG(FATAL) << "setegid(AID_ROOT) failed"; |
| } |
| |
| if (!secontext.empty()) { |
| setfscreatecon(nullptr); |
| } |
| } |
| |
| // replaces any unacceptable characters with '_', the |
| // length of the resulting string is equal to the input string |
| void SanitizePartitionName(std::string* string) { |
| const char* accept = |
| "abcdefghijklmnopqrstuvwxyz" |
| "ABCDEFGHIJKLMNOPQRSTUVWXYZ" |
| "0123456789" |
| "_-."; |
| |
| if (!string) return; |
| |
| std::string::size_type pos = 0; |
| while ((pos = string->find_first_not_of(accept, pos)) != std::string::npos) { |
| (*string)[pos] = '_'; |
| } |
| } |
| |
| std::vector<std::string> DeviceHandler::GetBlockDeviceSymlinks(const Uevent& uevent) const { |
| std::string device; |
| std::string type; |
| |
| if (FindPlatformDevice(uevent.path, &device)) { |
| // Skip /devices/platform or /devices/ if present |
| static const std::string devices_platform_prefix = "/devices/platform/"; |
| static const std::string devices_prefix = "/devices/"; |
| |
| if (StartsWith(device, devices_platform_prefix)) { |
| device = device.substr(devices_platform_prefix.length()); |
| } else if (StartsWith(device, devices_prefix)) { |
| device = device.substr(devices_prefix.length()); |
| } |
| |
| type = "platform"; |
| } else if (FindPciDevicePrefix(uevent.path, &device)) { |
| type = "pci"; |
| } else if (FindVbdDevicePrefix(uevent.path, &device)) { |
| type = "vbd"; |
| } else { |
| return {}; |
| } |
| |
| std::vector<std::string> links; |
| |
| LOG(VERBOSE) << "found " << type << " device " << device; |
| |
| auto link_path = "/dev/block/" + type + "/" + device; |
| |
| if (!uevent.partition_name.empty()) { |
| std::string partition_name_sanitized(uevent.partition_name); |
| SanitizePartitionName(&partition_name_sanitized); |
| if (partition_name_sanitized != uevent.partition_name) { |
| LOG(VERBOSE) << "Linking partition '" << uevent.partition_name << "' as '" |
| << partition_name_sanitized << "'"; |
| } |
| links.emplace_back(link_path + "/by-name/" + partition_name_sanitized); |
| // Adds symlink: /dev/block/by-name/<partition_name>. |
| if (boot_devices_.find(device) != boot_devices_.end()) { |
| links.emplace_back("/dev/block/by-name/" + partition_name_sanitized); |
| } |
| } |
| |
| auto last_slash = uevent.path.rfind('/'); |
| links.emplace_back(link_path + "/" + uevent.path.substr(last_slash + 1)); |
| |
| return links; |
| } |
| |
| void DeviceHandler::HandleDevice(const std::string& action, const std::string& devpath, bool block, |
| int major, int minor, const std::vector<std::string>& links) const { |
| if (action == "add") { |
| MakeDevice(devpath, block, major, minor, links); |
| for (const auto& link : links) { |
| if (!mkdir_recursive(Dirname(link), 0755)) { |
| PLOG(ERROR) << "Failed to create directory " << Dirname(link); |
| } |
| |
| if (symlink(devpath.c_str(), link.c_str())) { |
| if (errno != EEXIST) { |
| PLOG(ERROR) << "Failed to symlink " << devpath << " to " << link; |
| } else if (std::string link_path; |
| Readlink(link, &link_path) && link_path != devpath) { |
| PLOG(ERROR) << "Failed to symlink " << devpath << " to " << link |
| << ", which already links to: " << link_path; |
| } |
| } |
| } |
| } |
| |
| if (action == "remove") { |
| for (const auto& link : links) { |
| std::string link_path; |
| if (Readlink(link, &link_path) && link_path == devpath) { |
| unlink(link.c_str()); |
| } |
| } |
| unlink(devpath.c_str()); |
| } |
| } |
| |
| void DeviceHandler::HandleUevent(const Uevent& uevent) { |
| if (uevent.action == "add" || uevent.action == "change" || uevent.action == "online") { |
| FixupSysPermissions(uevent.path, uevent.subsystem); |
| } |
| |
| // if it's not a /dev device, nothing to do |
| if (uevent.major < 0 || uevent.minor < 0) return; |
| |
| std::string devpath; |
| std::vector<std::string> links; |
| bool block = false; |
| |
| if (uevent.subsystem == "block") { |
| block = true; |
| devpath = "/dev/block/" + Basename(uevent.path); |
| |
| if (StartsWith(uevent.path, "/devices")) { |
| links = GetBlockDeviceSymlinks(uevent); |
| } |
| } else if (const auto subsystem = |
| std::find(subsystems_.cbegin(), subsystems_.cend(), uevent.subsystem); |
| subsystem != subsystems_.cend()) { |
| devpath = subsystem->ParseDevPath(uevent); |
| } else if (uevent.subsystem == "usb") { |
| if (!uevent.device_name.empty()) { |
| devpath = "/dev/" + uevent.device_name; |
| } else { |
| // This imitates the file system that would be created |
| // if we were using devfs instead. |
| // Minors are broken up into groups of 128, starting at "001" |
| int bus_id = uevent.minor / 128 + 1; |
| int device_id = uevent.minor % 128 + 1; |
| devpath = StringPrintf("/dev/bus/usb/%03d/%03d", bus_id, device_id); |
| } |
| } else if (StartsWith(uevent.subsystem, "usb")) { |
| // ignore other USB events |
| return; |
| } else { |
| devpath = "/dev/" + Basename(uevent.path); |
| } |
| |
| mkdir_recursive(Dirname(devpath), 0755); |
| |
| HandleDevice(uevent.action, devpath, block, uevent.major, uevent.minor, links); |
| } |
| |
| void DeviceHandler::ColdbootDone() { |
| skip_restorecon_ = true; |
| } |
| |
| DeviceHandler::DeviceHandler(std::vector<Permissions> dev_permissions, |
| std::vector<SysfsPermissions> sysfs_permissions, |
| std::vector<Subsystem> subsystems, std::set<std::string> boot_devices, |
| bool skip_restorecon) |
| : dev_permissions_(std::move(dev_permissions)), |
| sysfs_permissions_(std::move(sysfs_permissions)), |
| subsystems_(std::move(subsystems)), |
| boot_devices_(std::move(boot_devices)), |
| skip_restorecon_(skip_restorecon), |
| sysfs_mount_point_("/sys") {} |
| |
| DeviceHandler::DeviceHandler() |
| : DeviceHandler(std::vector<Permissions>{}, std::vector<SysfsPermissions>{}, |
| std::vector<Subsystem>{}, std::set<std::string>{}, false) {} |
| |
| } // namespace init |
| } // namespace android |
