| /* $NetBSD: conv.c,v 1.17 2003/08/07 09:05:10 agc Exp $ */ |
| |
| /*- |
| * Copyright (c) 1991, 1993, 1994 |
| * The Regents of the University of California. All rights reserved. |
| * |
| * This code is derived from software contributed to Berkeley by |
| * Keith Muller of the University of California, San Diego and Lance |
| * Visser of Convex Computer Corporation. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the University nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| */ |
| |
| #include <sys/cdefs.h> |
| #ifndef lint |
| #if 0 |
| static char sccsid[] = "@(#)conv.c 8.3 (Berkeley) 4/2/94"; |
| #else |
| __RCSID("$NetBSD: conv.c,v 1.17 2003/08/07 09:05:10 agc Exp $"); |
| #endif |
| #endif /* not lint */ |
| |
| #include <sys/param.h> |
| #include <sys/time.h> |
| |
| #include <err.h> |
| #include <string.h> |
| #include <stdlib.h> |
| |
| #include "dd.h" |
| #include "extern.h" |
| |
| /* |
| * def -- |
| * Copy input to output. Input is buffered until reaches obs, and then |
| * output until less than obs remains. Only a single buffer is used. |
| * Worst case buffer calculation is (ibs + obs - 1). |
| */ |
| void |
| def(void) |
| { |
| uint64_t cnt; |
| u_char *inp; |
| const u_char *t; |
| |
| if ((t = ctab) != NULL) |
| for (inp = in.dbp - (cnt = in.dbrcnt); cnt--; ++inp) |
| *inp = t[*inp]; |
| |
| /* Make the output buffer look right. */ |
| out.dbp = in.dbp; |
| out.dbcnt = in.dbcnt; |
| |
| if (in.dbcnt >= out.dbsz) { |
| /* If the output buffer is full, write it. */ |
| dd_out(0); |
| |
| /* |
| * Ddout copies the leftover output to the beginning of |
| * the buffer and resets the output buffer. Reset the |
| * input buffer to match it. |
| */ |
| in.dbp = out.dbp; |
| in.dbcnt = out.dbcnt; |
| } |
| } |
| |
| void |
| def_close(void) |
| { |
| |
| /* Just update the count, everything is already in the buffer. */ |
| if (in.dbcnt) |
| out.dbcnt = in.dbcnt; |
| } |
| |
| #ifdef NO_CONV |
| /* Build a smaller version (i.e. for a miniroot) */ |
| /* These can not be called, but just in case... */ |
| static const char no_block[] = "unblock and -DNO_CONV?"; |
| void block(void) { errx(EXIT_FAILURE, "%s", no_block + 2); } |
| void block_close(void) { errx(EXIT_FAILURE, "%s", no_block + 2); } |
| void unblock(void) { errx(EXIT_FAILURE, "%s", no_block); } |
| void unblock_close(void) { errx(EXIT_FAILURE, "%s", no_block); } |
| #else /* NO_CONV */ |
| |
| /* |
| * Copy variable length newline terminated records with a max size cbsz |
| * bytes to output. Records less than cbs are padded with spaces. |
| * |
| * max in buffer: MAX(ibs, cbsz) |
| * max out buffer: obs + cbsz |
| */ |
| void |
| block(void) |
| { |
| static int intrunc; |
| int ch = 0; /* pacify gcc */ |
| uint64_t cnt, maxlen; |
| u_char *inp, *outp; |
| const u_char *t; |
| |
| /* |
| * Record truncation can cross block boundaries. If currently in a |
| * truncation state, keep tossing characters until reach a newline. |
| * Start at the beginning of the buffer, as the input buffer is always |
| * left empty. |
| */ |
| if (intrunc) { |
| for (inp = in.db, cnt = in.dbrcnt; |
| cnt && *inp++ != '\n'; --cnt); |
| if (!cnt) { |
| in.dbcnt = 0; |
| in.dbp = in.db; |
| return; |
| } |
| intrunc = 0; |
| /* Adjust the input buffer numbers. */ |
| in.dbcnt = cnt - 1; |
| in.dbp = inp + cnt - 1; |
| } |
| |
| /* |
| * Copy records (max cbsz size chunks) into the output buffer. The |
| * translation is done as we copy into the output buffer. |
| */ |
| for (inp = in.dbp - in.dbcnt, outp = out.dbp; in.dbcnt;) { |
| maxlen = MIN(cbsz, in.dbcnt); |
| if ((t = ctab) != NULL) |
| for (cnt = 0; |
| cnt < maxlen && (ch = *inp++) != '\n'; ++cnt) |
| *outp++ = t[ch]; |
| else |
| for (cnt = 0; |
| cnt < maxlen && (ch = *inp++) != '\n'; ++cnt) |
| *outp++ = ch; |
| /* |
| * Check for short record without a newline. Reassemble the |
| * input block. |
| */ |
| if (ch != '\n' && in.dbcnt < cbsz) { |
| (void)memmove(in.db, in.dbp - in.dbcnt, in.dbcnt); |
| break; |
| } |
| |
| /* Adjust the input buffer numbers. */ |
| in.dbcnt -= cnt; |
| if (ch == '\n') |
| --in.dbcnt; |
| |
| /* Pad short records with spaces. */ |
| if (cnt < cbsz) |
| (void)memset(outp, ctab ? ctab[' '] : ' ', cbsz - cnt); |
| else { |
| /* |
| * If the next character wouldn't have ended the |
| * block, it's a truncation. |
| */ |
| if (!in.dbcnt || *inp != '\n') |
| ++st.trunc; |
| |
| /* Toss characters to a newline. */ |
| for (; in.dbcnt && *inp++ != '\n'; --in.dbcnt); |
| if (!in.dbcnt) |
| intrunc = 1; |
| else |
| --in.dbcnt; |
| } |
| |
| /* Adjust output buffer numbers. */ |
| out.dbp += cbsz; |
| if ((out.dbcnt += cbsz) >= out.dbsz) |
| dd_out(0); |
| outp = out.dbp; |
| } |
| in.dbp = in.db + in.dbcnt; |
| } |
| |
| void |
| block_close(void) |
| { |
| |
| /* |
| * Copy any remaining data into the output buffer and pad to a record. |
| * Don't worry about truncation or translation, the input buffer is |
| * always empty when truncating, and no characters have been added for |
| * translation. The bottom line is that anything left in the input |
| * buffer is a truncated record. Anything left in the output buffer |
| * just wasn't big enough. |
| */ |
| if (in.dbcnt) { |
| ++st.trunc; |
| (void)memmove(out.dbp, in.dbp - in.dbcnt, in.dbcnt); |
| (void)memset(out.dbp + in.dbcnt, |
| ctab ? ctab[' '] : ' ', cbsz - in.dbcnt); |
| out.dbcnt += cbsz; |
| } |
| } |
| |
| /* |
| * Convert fixed length (cbsz) records to variable length. Deletes any |
| * trailing blanks and appends a newline. |
| * |
| * max in buffer: MAX(ibs, cbsz) + cbsz |
| * max out buffer: obs + cbsz |
| */ |
| void |
| unblock(void) |
| { |
| uint64_t cnt; |
| u_char *inp; |
| const u_char *t; |
| |
| /* Translation and case conversion. */ |
| if ((t = ctab) != NULL) |
| for (cnt = in.dbrcnt, inp = in.dbp - 1; cnt--; inp--) |
| *inp = t[*inp]; |
| /* |
| * Copy records (max cbsz size chunks) into the output buffer. The |
| * translation has to already be done or we might not recognize the |
| * spaces. |
| */ |
| for (inp = in.db; in.dbcnt >= cbsz; inp += cbsz, in.dbcnt -= cbsz) { |
| for (t = inp + cbsz - 1; t >= inp && *t == ' '; --t); |
| if (t >= inp) { |
| cnt = t - inp + 1; |
| (void)memmove(out.dbp, inp, cnt); |
| out.dbp += cnt; |
| out.dbcnt += cnt; |
| } |
| ++out.dbcnt; |
| *out.dbp++ = '\n'; |
| if (out.dbcnt >= out.dbsz) |
| dd_out(0); |
| } |
| if (in.dbcnt) |
| (void)memmove(in.db, in.dbp - in.dbcnt, in.dbcnt); |
| in.dbp = in.db + in.dbcnt; |
| } |
| |
| void |
| unblock_close(void) |
| { |
| uint64_t cnt; |
| u_char *t; |
| |
| if (in.dbcnt) { |
| warnx("%s: short input record", in.name); |
| for (t = in.db + in.dbcnt - 1; t >= in.db && *t == ' '; --t); |
| if (t >= in.db) { |
| cnt = t - in.db + 1; |
| (void)memmove(out.dbp, in.db, cnt); |
| out.dbp += cnt; |
| out.dbcnt += cnt; |
| } |
| ++out.dbcnt; |
| *out.dbp++ = '\n'; |
| } |
| } |
| |
| #endif /* NO_CONV */ |