| /* |
| * Copyright (C) 2016 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define _REALLY_INCLUDE_SYS__SYSTEM_PROPERTIES_H_ |
| |
| #include "android-base/properties.h" |
| |
| #include <sys/system_properties.h> |
| #include <sys/_system_properties.h> |
| |
| #include <algorithm> |
| #include <chrono> |
| #include <string> |
| |
| #include <android-base/parseint.h> |
| |
| using namespace std::chrono_literals; |
| |
| namespace android { |
| namespace base { |
| |
| std::string GetProperty(const std::string& key, const std::string& default_value) { |
| const prop_info* pi = __system_property_find(key.c_str()); |
| if (pi == nullptr) return default_value; |
| |
| char buf[PROP_VALUE_MAX]; |
| if (__system_property_read(pi, nullptr, buf) > 0) return buf; |
| |
| // If the property exists but is empty, also return the default value. |
| // Since we can't remove system properties, "empty" is traditionally |
| // the same as "missing" (this was true for cutils' property_get). |
| return default_value; |
| } |
| |
| bool GetBoolProperty(const std::string& key, bool default_value) { |
| std::string value = GetProperty(key, ""); |
| if (value == "1" || value == "y" || value == "yes" || value == "on" || value == "true") { |
| return true; |
| } else if (value == "0" || value == "n" || value == "no" || value == "off" || value == "false") { |
| return false; |
| } |
| return default_value; |
| } |
| |
| template <typename T> |
| T GetIntProperty(const std::string& key, T default_value, T min, T max) { |
| T result; |
| std::string value = GetProperty(key, ""); |
| if (!value.empty() && android::base::ParseInt(value, &result, min, max)) return result; |
| return default_value; |
| } |
| |
| template <typename T> |
| T GetUintProperty(const std::string& key, T default_value, T max) { |
| T result; |
| std::string value = GetProperty(key, ""); |
| if (!value.empty() && android::base::ParseUint(value, &result, max)) return result; |
| return default_value; |
| } |
| |
| template int8_t GetIntProperty(const std::string&, int8_t, int8_t, int8_t); |
| template int16_t GetIntProperty(const std::string&, int16_t, int16_t, int16_t); |
| template int32_t GetIntProperty(const std::string&, int32_t, int32_t, int32_t); |
| template int64_t GetIntProperty(const std::string&, int64_t, int64_t, int64_t); |
| |
| template uint8_t GetUintProperty(const std::string&, uint8_t, uint8_t); |
| template uint16_t GetUintProperty(const std::string&, uint16_t, uint16_t); |
| template uint32_t GetUintProperty(const std::string&, uint32_t, uint32_t); |
| template uint64_t GetUintProperty(const std::string&, uint64_t, uint64_t); |
| |
| bool SetProperty(const std::string& key, const std::string& value) { |
| return (__system_property_set(key.c_str(), value.c_str()) == 0); |
| } |
| |
| struct WaitForPropertyData { |
| bool done; |
| const std::string* expected_value; |
| unsigned last_read_serial; |
| }; |
| |
| static void WaitForPropertyCallback(void* data_ptr, const char*, const char* value, unsigned serial) { |
| WaitForPropertyData* data = reinterpret_cast<WaitForPropertyData*>(data_ptr); |
| if (*data->expected_value == value) { |
| data->done = true; |
| } else { |
| data->last_read_serial = serial; |
| } |
| } |
| |
| // TODO: chrono_utils? |
| static void DurationToTimeSpec(timespec& ts, const std::chrono::milliseconds d) { |
| auto s = std::chrono::duration_cast<std::chrono::seconds>(d); |
| auto ns = std::chrono::duration_cast<std::chrono::nanoseconds>(d - s); |
| ts.tv_sec = s.count(); |
| ts.tv_nsec = ns.count(); |
| } |
| |
| // TODO: boot_clock? |
| using AbsTime = std::chrono::time_point<std::chrono::steady_clock>; |
| |
| static void UpdateTimeSpec(timespec& ts, std::chrono::milliseconds relative_timeout, |
| const AbsTime& start_time) { |
| auto now = std::chrono::steady_clock::now(); |
| auto time_elapsed = std::chrono::duration_cast<std::chrono::milliseconds>(now - start_time); |
| if (time_elapsed >= relative_timeout) { |
| ts = { 0, 0 }; |
| } else { |
| auto remaining_timeout = relative_timeout - time_elapsed; |
| DurationToTimeSpec(ts, remaining_timeout); |
| } |
| } |
| |
| // Waits for the system property `key` to be created. |
| // Times out after `relative_timeout`. |
| // Sets absolute_timeout which represents absolute time for the timeout. |
| // Returns nullptr on timeout. |
| static const prop_info* WaitForPropertyCreation(const std::string& key, |
| const std::chrono::milliseconds& relative_timeout, |
| const AbsTime& start_time) { |
| // Find the property's prop_info*. |
| const prop_info* pi; |
| unsigned global_serial = 0; |
| while ((pi = __system_property_find(key.c_str())) == nullptr) { |
| // The property doesn't even exist yet. |
| // Wait for a global change and then look again. |
| timespec ts; |
| UpdateTimeSpec(ts, relative_timeout, start_time); |
| if (!__system_property_wait(nullptr, global_serial, &global_serial, &ts)) return nullptr; |
| } |
| return pi; |
| } |
| |
| bool WaitForProperty(const std::string& key, const std::string& expected_value, |
| std::chrono::milliseconds relative_timeout) { |
| auto start_time = std::chrono::steady_clock::now(); |
| const prop_info* pi = WaitForPropertyCreation(key, relative_timeout, start_time); |
| if (pi == nullptr) return false; |
| |
| WaitForPropertyData data; |
| data.expected_value = &expected_value; |
| data.done = false; |
| while (true) { |
| timespec ts; |
| // Check whether the property has the value we're looking for? |
| __system_property_read_callback(pi, WaitForPropertyCallback, &data); |
| if (data.done) return true; |
| |
| // It didn't, so wait for the property to change before checking again. |
| UpdateTimeSpec(ts, relative_timeout, start_time); |
| uint32_t unused; |
| if (!__system_property_wait(pi, data.last_read_serial, &unused, &ts)) return false; |
| } |
| } |
| |
| bool WaitForPropertyCreation(const std::string& key, |
| std::chrono::milliseconds relative_timeout) { |
| auto start_time = std::chrono::steady_clock::now(); |
| return (WaitForPropertyCreation(key, relative_timeout, start_time) != nullptr); |
| } |
| |
| } // namespace base |
| } // namespace android |