| /* | |
| * Copyright (C) 2010 The Android Open Source Project | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); | |
| * you may not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| #if defined(__APPLE__) | |
| /* | |
| * Implementation of the POSIX open_memstream() function, which Linux has | |
| * but BSD lacks. | |
| * | |
| * Summary: | |
| * - Works like a file-backed FILE* opened with fopen(name, "w"), but the | |
| * backing is a chunk of memory rather than a file. | |
| * - The buffer expands as you write more data. Seeking past the end | |
| * of the file and then writing to it zero-fills the gap. | |
| * - The values at "*bufp" and "*sizep" should be considered read-only, | |
| * and are only valid immediately after an fflush() or fclose(). | |
| * - A '\0' is maintained just past the end of the file. This is not included | |
| * in "*sizep". (The behavior w.r.t. fseek() is not clearly defined. | |
| * The spec says the null byte is written when a write() advances EOF, | |
| * but it looks like glibc ensures the null byte is always found at EOF, | |
| * even if you just seeked backwards. The example on the opengroup.org | |
| * page suggests that this is the expected behavior. The null must be | |
| * present after a no-op fflush(), which we can't see, so we have to save | |
| * and restore it. Annoying, but allows file truncation.) | |
| * - After fclose(), the caller must eventually free(*bufp). | |
| * | |
| * This is built out of funopen(), which BSD has but Linux lacks. There is | |
| * no flush() operator, so we need to keep the user pointers up to date | |
| * after each operation. | |
| * | |
| * I don't think Windows has any of the above, but we don't need to use | |
| * them there, so we just supply a stub. | |
| */ | |
| #include <cutils/open_memstream.h> | |
| #include <stdlib.h> | |
| #include <sys/types.h> | |
| #include <unistd.h> | |
| #include <stdio.h> | |
| #include <string.h> | |
| #include <errno.h> | |
| #include <assert.h> | |
| #if 0 | |
| # define DBUG(x) printf x | |
| #else | |
| # define DBUG(x) ((void)0) | |
| #endif | |
| /* | |
| * Definition of a seekable, write-only memory stream. | |
| */ | |
| typedef struct { | |
| char** bufp; /* pointer to buffer pointer */ | |
| size_t* sizep; /* pointer to eof */ | |
| size_t allocSize; /* size of buffer */ | |
| size_t eof; /* furthest point we've written to */ | |
| size_t offset; /* current write offset */ | |
| char saved; /* required by NUL handling */ | |
| } MemStream; | |
| #define kInitialSize 1024 | |
| /* | |
| * Ensure that we have enough storage to write "size" bytes at the | |
| * current offset. We also have to take into account the extra '\0' | |
| * that we maintain just past EOF. | |
| * | |
| * Returns 0 on success. | |
| */ | |
| static int ensureCapacity(MemStream* stream, int writeSize) | |
| { | |
| DBUG(("+++ ensureCap off=%d size=%d\n", stream->offset, writeSize)); | |
| size_t neededSize = stream->offset + writeSize + 1; | |
| if (neededSize <= stream->allocSize) | |
| return 0; | |
| size_t newSize; | |
| if (stream->allocSize == 0) { | |
| newSize = kInitialSize; | |
| } else { | |
| newSize = stream->allocSize; | |
| newSize += newSize / 2; /* expand by 3/2 */ | |
| } | |
| if (newSize < neededSize) | |
| newSize = neededSize; | |
| DBUG(("+++ realloc %p->%p to size=%d\n", | |
| stream->bufp, *stream->bufp, newSize)); | |
| char* newBuf = (char*) realloc(*stream->bufp, newSize); | |
| if (newBuf == NULL) | |
| return -1; | |
| *stream->bufp = newBuf; | |
| stream->allocSize = newSize; | |
| return 0; | |
| } | |
| /* | |
| * Write data to a memstream, expanding the buffer if necessary. | |
| * | |
| * If we previously seeked beyond EOF, zero-fill the gap. | |
| * | |
| * Returns the number of bytes written. | |
| */ | |
| static int write_memstream(void* cookie, const char* buf, int size) | |
| { | |
| MemStream* stream = (MemStream*) cookie; | |
| if (ensureCapacity(stream, size) < 0) | |
| return -1; | |
| /* seeked past EOF earlier? */ | |
| if (stream->eof < stream->offset) { | |
| DBUG(("+++ zero-fill gap from %d to %d\n", | |
| stream->eof, stream->offset-1)); | |
| memset(*stream->bufp + stream->eof, '\0', | |
| stream->offset - stream->eof); | |
| } | |
| /* copy data, advance write pointer */ | |
| memcpy(*stream->bufp + stream->offset, buf, size); | |
| stream->offset += size; | |
| if (stream->offset > stream->eof) { | |
| /* EOF has advanced, update it and append null byte */ | |
| DBUG(("+++ EOF advanced to %d, appending nul\n", stream->offset)); | |
| assert(stream->offset < stream->allocSize); | |
| stream->eof = stream->offset; | |
| } else { | |
| /* within previously-written area; save char we're about to stomp */ | |
| DBUG(("+++ within written area, saving '%c' at %d\n", | |
| *(*stream->bufp + stream->offset), stream->offset)); | |
| stream->saved = *(*stream->bufp + stream->offset); | |
| } | |
| *(*stream->bufp + stream->offset) = '\0'; | |
| *stream->sizep = stream->offset; | |
| return size; | |
| } | |
| /* | |
| * Seek within a memstream. | |
| * | |
| * Returns the new offset, or -1 on failure. | |
| */ | |
| static fpos_t seek_memstream(void* cookie, fpos_t offset, int whence) | |
| { | |
| MemStream* stream = (MemStream*) cookie; | |
| off_t newPosn = (off_t) offset; | |
| if (whence == SEEK_CUR) { | |
| newPosn += stream->offset; | |
| } else if (whence == SEEK_END) { | |
| newPosn += stream->eof; | |
| } | |
| if (newPosn < 0 || ((fpos_t)((size_t) newPosn)) != newPosn) { | |
| /* bad offset - negative or huge */ | |
| DBUG(("+++ bogus seek offset %ld\n", (long) newPosn)); | |
| errno = EINVAL; | |
| return (fpos_t) -1; | |
| } | |
| if (stream->offset < stream->eof) { | |
| /* | |
| * We were pointing to an area we'd already written to, which means | |
| * we stomped on a character and must now restore it. | |
| */ | |
| DBUG(("+++ restoring char '%c' at %d\n", | |
| stream->saved, stream->offset)); | |
| *(*stream->bufp + stream->offset) = stream->saved; | |
| } | |
| stream->offset = (size_t) newPosn; | |
| if (stream->offset < stream->eof) { | |
| /* | |
| * We're seeked backward into the stream. Preserve the character | |
| * at EOF and stomp it with a NUL. | |
| */ | |
| stream->saved = *(*stream->bufp + stream->offset); | |
| *(*stream->bufp + stream->offset) = '\0'; | |
| *stream->sizep = stream->offset; | |
| } else { | |
| /* | |
| * We're positioned at, or possibly beyond, the EOF. We want to | |
| * publish the current EOF, not the current position. | |
| */ | |
| *stream->sizep = stream->eof; | |
| } | |
| return newPosn; | |
| } | |
| /* | |
| * Close the memstream. We free everything but the data buffer. | |
| */ | |
| static int close_memstream(void* cookie) | |
| { | |
| free(cookie); | |
| return 0; | |
| } | |
| /* | |
| * Prepare a memstream. | |
| */ | |
| FILE* open_memstream(char** bufp, size_t* sizep) | |
| { | |
| FILE* fp; | |
| MemStream* stream; | |
| if (bufp == NULL || sizep == NULL) { | |
| errno = EINVAL; | |
| return NULL; | |
| } | |
| stream = (MemStream*) calloc(1, sizeof(MemStream)); | |
| if (stream == NULL) | |
| return NULL; | |
| fp = funopen(stream, | |
| NULL, write_memstream, seek_memstream, close_memstream); | |
| if (fp == NULL) { | |
| free(stream); | |
| return NULL; | |
| } | |
| *sizep = 0; | |
| *bufp = NULL; | |
| stream->bufp = bufp; | |
| stream->sizep = sizep; | |
| return fp; | |
| } | |
| #if 0 | |
| #define _GNU_SOURCE | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| /* | |
| * Simple regression test. | |
| * | |
| * To test on desktop Linux with valgrind, it's possible to make a simple | |
| * change to open_memstream() to use fopencookie instead: | |
| * | |
| * cookie_io_functions_t iofuncs = | |
| * { NULL, write_memstream, seek_memstream, close_memstream }; | |
| * fp = fopencookie(stream, "w", iofuncs); | |
| * | |
| * (Some tweaks to seek_memstream are also required, as that takes a | |
| * pointer to an offset rather than an offset, and returns 0 or -1.) | |
| */ | |
| int testMemStream(void) | |
| { | |
| FILE *stream; | |
| char *buf; | |
| size_t len; | |
| off_t eob; | |
| printf("Test1\n"); | |
| /* std example */ | |
| stream = open_memstream(&buf, &len); | |
| fprintf(stream, "hello my world"); | |
| fflush(stream); | |
| printf("buf=%s, len=%zu\n", buf, len); | |
| eob = ftello(stream); | |
| fseeko(stream, 0, SEEK_SET); | |
| fprintf(stream, "good-bye"); | |
| fseeko(stream, eob, SEEK_SET); | |
| fclose(stream); | |
| printf("buf=%s, len=%zu\n", buf, len); | |
| free(buf); | |
| printf("Test2\n"); | |
| /* std example without final seek-to-end */ | |
| stream = open_memstream(&buf, &len); | |
| fprintf(stream, "hello my world"); | |
| fflush(stream); | |
| printf("buf=%s, len=%zu\n", buf, len); | |
| eob = ftello(stream); | |
| fseeko(stream, 0, SEEK_SET); | |
| fprintf(stream, "good-bye"); | |
| //fseeko(stream, eob, SEEK_SET); | |
| fclose(stream); | |
| printf("buf=%s, len=%zu\n", buf, len); | |
| free(buf); | |
| printf("Test3\n"); | |
| /* fancy example; should expand buffer with writes */ | |
| static const int kCmpLen = 1024 + 128; | |
| char* cmp = malloc(kCmpLen); | |
| memset(cmp, 0, 1024); | |
| memset(cmp+1024, 0xff, kCmpLen-1024); | |
| sprintf(cmp, "This-is-a-tes1234"); | |
| sprintf(cmp + 1022, "abcdef"); | |
| stream = open_memstream (&buf, &len); | |
| setvbuf(stream, NULL, _IONBF, 0); /* note: crashes in glibc with this */ | |
| fprintf(stream, "This-is-a-test"); | |
| fseek(stream, -1, SEEK_CUR); /* broken in glibc; can use {13,SEEK_SET} */ | |
| fprintf(stream, "1234"); | |
| fseek(stream, 1022, SEEK_SET); | |
| fputc('a', stream); | |
| fputc('b', stream); | |
| fputc('c', stream); | |
| fputc('d', stream); | |
| fputc('e', stream); | |
| fputc('f', stream); | |
| fflush(stream); | |
| if (memcmp(buf, cmp, len+1) != 0) { | |
| printf("mismatch\n"); | |
| } else { | |
| printf("match\n"); | |
| } | |
| printf("Test4\n"); | |
| stream = open_memstream (&buf, &len); | |
| fseek(stream, 5000, SEEK_SET); | |
| fseek(stream, 4096, SEEK_SET); | |
| fseek(stream, -1, SEEK_SET); /* should have no effect */ | |
| fputc('x', stream); | |
| if (ftell(stream) == 4097) | |
| printf("good\n"); | |
| else | |
| printf("BAD: offset is %ld\n", ftell(stream)); | |
| printf("DONE\n"); | |
| return 0; | |
| } | |
| /* expected output: | |
| Test1 | |
| buf=hello my world, len=14 | |
| buf=good-bye world, len=14 | |
| Test2 | |
| buf=hello my world, len=14 | |
| buf=good-bye, len=8 | |
| Test3 | |
| match | |
| Test4 | |
| good | |
| DONE | |
| */ | |
| #endif | |
| #endif /* __APPLE__ */ |